of upgrading older machines using ataraid(4) to newer releases.
This optional parameter is controlled via kern.geom.raid.legacy_aliases
and will create a /dev/ar0 device that will point at /dev/raid/r0 for
example.
Tested on Dell SC 1425 DDF-1 format software raid controllers installing from
stable/7 and upgrading to stable/9 without having to adjust /etc/fstab
Reviewed by: mav
Obtained from: Yahoo!
MFC after: 2 Weeks
unsupported metadata types like Intel Smart Response to not corrupt them.
- Improve setting of these things during metadata writing to protect from
incapable BIOS'es and other implementations.
disks should be rebuilt. Our rebuild code is same time disk-centric. To
handle this situation properly check all disks for RBLD flags, and if no
disk specified try rebuild/resync all of them except newly inserted.
Windows driver uses such migration when it creates new arrays. While GEOM
RAID has no mechanism to implement migration in general case, this specifc
case still can be handled easily via degraded RAID1 creation followed by
regular rebuild.
It is alike to RAID1, but with dedicating master and recovery disks and
providing manual control over synchronization. It allows to use recovery
disk as snapshot of the master disk from the time of the last sync.
This implementation is not functionaly complete comparing to Windows,
but it is better then silent conversion to RAID1 on first boot.
Alike to BIO_WRITE, report success if at least one subdisk succeeded with
BIO_DELETE. But unlike BIO_WRITE don't fail disk on BIO_DELETE error.
Sponsored by: iXsystems, Inc.
MFC after: 1 month
If at least one subdisk in the volume supports it, BIO_DELETE requests
will be propagated down. Unfortunatelly, for RAID levels with redundancy
unmapped blocks will be mapped back during first rebuild/resync process.
Sponsored by: iXsystems, Inc.
MFC after: 1 month
and move that action from shutdown_pre_sync to shutdown_post_sync stage
to avoid extra flapping.
ZFS tends to not close devices on shutdown, that doesn't allow GEOM RAID
to shutdown gracefully. To handle that, mark volume as clean just when
shutdown time comes and there are no active writes.
MFC after: 2 weeks
provider name to be specified instead of geom name (first argument in all
subcommands except label). In most cases there is only one array used
any way, so it is not really useful to make user type ugly geom names like
Intel-f0bdf223 or SiI-732c2b9448cf. Though they can be used in some cases.
Sponsored by: iXsystems, Inc.
MFC after: 1 month
failed while write to some other succeeded. Instead mark disk as failed.
- Make RAID1E less aggressive in failing disks to avoid volume breakage.
MFC after: 2 weeks
defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
- add support for volumes above 2TiB with Promise metadata format;
- enforse and document other limitations:
- Intel and Promise metadata formats do not support disks above 2TiB;
- NVIDIA metadata format does not support volumes above 2TiB.
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
