would be able to work with aac(4).
This approach is used by some other drivers as well. However, we
need a more generic way to do this in order to avoid having to
special case headers in individual drivers for each platform.
Obtained from: Adaptec (version b11518)
Approved by: scottl
been handled instead of when at least one descriptor was just handled.
For bge, it is normal to get a txeof when only a small fraction of the
queued tx descriptors have been handled, so the bug broke the watchdog
in a usual case.
- moved the synchronizing bus read to after the bus write for the first
interrupt ack so that it actually synchronizes everything necessary.
We were acking not only the status update that triggered the interrupt
together with any status updates that occurred before we got around
to the bus write for the ack, but also any status updates that occur
after we do the bus write but before the write reaches the device.
The corresponding race for the second interrupt ack resulted in
sometimes returning from the interrupt handler with acked but
unserviced interrupt events. Such events then remain unserviced
until further events cause another interrupt or the watchdog times
out.
The race was often lost on my 5705, apparently since my 5705 has broken
event coalescing which causes a status update for almost every packet,
so another status update is quite likely to occur while the interrupt
handler is running. Watchdog timeouts weren't very noticeable,
apparently because bge_txeof() has one of the usual bugs resetting the
watchdog.
- don't disable device interrupts while bge_intr() is running. Doing this
just had the side effects of:
- entering a device mode in which different coalescing parameters apply.
Different coalescing parameters can be used to either inhibit or
enhance the chance of getting another status update while in the
interrupt handler. This feature is useless with the current
organization of the interrupt handler but might be useful with a
taskqueue handler.
- giving a race for ack+reenable/return. This cannot be handled
by simply rearranging the order of bus accesses like the race for
ack+keepenable/entry. It is necessary to sync the ack and then
check for new events.
- taking longer, especially with the extra code to avoid the race on
ack+reenable/return.
Reviewed by: ru, gleb, scottl
vnode v_flag. For cluster buffers this would result in dereferencing NULL
b_vp. To prevent the panic, cache relevant vnode flag before calling
bstrategy.
Reported by: Peter Holm, kris
Tested by: Peter Holm
Reviewed by: tegge
Pointy hat to: kib
running thread's id on each cpu. This allow us to add in-kernel adaptive
spin for user level mutex. While spinning in user space is possible,
without correct thread running state exported from kernel, it hardly
can be implemented efficiently without wasting cpu cycles, however
exporting thread running state unlikely will be implemented soon as
it has to design and stablize interfaces. This implementation is
transparent to user space, it can be disabled dynamically. With this
change, mutex ping-pong program's performance is improved massively on
SMP machine. performance of mysql super-smack select benchmark is increased
about 7% on Intel dual dual-core2 Xeon machine, it indicates on systems
which have bunch of cpus and system-call overhead is low (athlon64, opteron,
and core-2 are known to be fast), the adaptive spin does help performance.
Added sysctls:
kern.threads.umtx_dflt_spins
if the sysctl value is non-zero, a zero umutex.m_spincount will
cause the sysctl value to be used a spin cycle count.
kern.threads.umtx_max_spins
the sysctl sets upper limit of spin cycle count.
Tested on: Athlon64 X2 3800+, Dual Xeon 5130
re_watchdog() in order to avoid races accessing if_timer.
- Use bus_get_dma_tag() so re(4) works on platforms requiring it.
- Remove invalid BUS_DMA_ALLOCNOW when creating the parent DMA tag
and the tags that are used for static memory allocations.
- Don't bother to set if_mtu to ETHERMTU, ether_ifattach() does that.
- Remove an unused variable in re_intr().
watchdog timer in dc_txeof() in case there are still unhandled
descriptors as dc_poll() invokes dc_poll() unconditionally.
Otherwise this would result in the watchdog timer constantly being
being reloaded and thus circumvent that the watchdog ever fires in
the DEVICE_POLLING case.
Pointed out by: bde
pmap.c, and is potentially the cause of hangs reported on machines with a
small amount of memory. On machines with sufficient RAM, and without a lot
of processes running, this situation would probably never occur.
Testing is still incomplete, but it is obviously wrong so remove the
offending code now.
The issue of what to do when both the primary and secondary hash overflow
is still open.
Reported by: Dan Kresja at windriver dot com, via alc
This macro was written expecting a 32-bit unsigned long, and
doesn't work properly on 64-bit systems. This bug caused vn_stat()
to return incorrect values for files larger than 2gb on msdosfs filesystems
on 64-bit systems.
PR: 106703
Submitted by: Axel Gonzalez <loox e-shell net>
MFC after: 3 days
This bug caused vn_stat() to fail on files larger than 2gb on msdosfs
filesystems on AMD64.
PR: 106703
Tested by: Axel Gonzalez <loox e-shell net>
MFC after: 3 days
- Do not repeatedly read vendor/device IDs while probing.
- Remove redundant bzero(3) for softc. device_get_softc(9) does it for free[1].
Reviewed by: glebius
Suggested by: glebius[1]
aches as a read-only file. In a number of cases this has led to
compiles failing- usually due to some strange NFS drift which thinks
that the opt_ah.h in the compile directory is out of date wrt the
source it is copied from. When the copy is executed again, it fails
because the target is read-only. Oops. Modify the compile hooks
avoid this.
Discussed with a while back with: Sam Leffler
- If we want mii_phy_add_media() to add 1000baseT media, we need to
supply sc->mii_extcapabilities.
- Fix formatting when announcing autonegotiation support.
usage to conform to that of tl0_trap - the separate code path
for unaligned faults was never getting used (and evidently doesn't
work), so ifdef out for now
Because accessing ID registers in rtl81x9 needs 32bit register access
and RL_IDR4/RL_IDR5 registers are reservered registers bzero() is
needed before copying ethernet address.
This fixes unaligned memory accesses panic in sparc64.
PR: kern/106801
MFC after: 3 days
as if they were really passed by reference. Specifically, the dead stores
elimination pass in the GCC 4.1 optimiser breaks the non-compliant behavior
on which FreeBSD relied. This change brings FreeBSD up to date by switching
trap frames to being explicitly passed by reference.
Reviewed by: kan
Tested by: kan
passed by value (trap frames) as if they were in fact being passed by
reference. For better or worse, this incorrect behaviour is no longer
present in gcc 4.1. In this patch I convert all trapframe arguments to
be explicitly pass by reference. I also remove vm86_initflags, pushing
the very little work that it actually does up into vm86_prepcall.
Reviewed by: kan
Tested by: kan
- The PCPU usage was to ensure that there were no faults on the stack while
the tte_hash_bucket lock was held - but this can be avoided by making sure
the address on the stack is already referenced.
- PCPU removal obviates the need for critical_{enter, exit}
- in trying to avoid nested brackets and #ifdef INVARIANTS around i at the
top, I broke booting for INVARIANTS all together :-(
- the cleanest fix is to simply assign to sq twice if INVARIANTS is enabled
- tested both with and without INVARIANTS :-/
after we perform the operations to delete the export,
call vfs_deleteopt() to delete the "export" mount option from
the linked list of mount options associated with that mount point.
This fixes one scenario:
- put a filesystem in /etc/exports to export it
- remove the filesystem from /etc/exports to delete the export and restart
mountd
- try to do a "mount -u -o ro" or "mount -u -o rw" on that filesystem
now that it is no longer exported.
arguments to fail. The mode field for shmget() appears to have undefined
meaning in the context of an already-present IPC object, but applications
appear to assume any arbitrary passed value will be ignored. I had hoped
to revisit this more quickly, but am removing the change for now to
prevent toe-stubbing.
Reported by: JAroslav Suchanek <jarda at grisoft dot cz>
PR: kern/106078
- rename skip_utrap to tl0_skip_utrap to indicate its use by the fill trap fault handler
- handle a null kstack by switching to the idle threads stack and then going to trap
- correctly handle a unaligned or unmapped stack during a fill trap
- save off some extra data in the pcpu pad in ptl1_panic
- add an assert that PCB is valid in vm_machdep.c
- add cnt_hold cnt_lock support for spin mutexes
- make sure contested is initialized to zero to only bump contested when appropriate
- move initialization function to kern_mutex.c to avoid cyclic dependency between
mutex.h and lock_profile.h
behave as expected.
Also:
- Return an error if WD_PASSIVE is passed in to the ioctl as only
WD_ACTIVE is implemented at the moment. See sys/watchdog.h for an
explanation of the difference between WD_ACTIVE and WD_PASSIVE.
- Remove the I_HAVE_TOTALLY_LOST_MY_SENSE_OF_HUMOR define. If you've
lost your sense of humor, than don't add a define.
Specific changes:
i80321_wdog.c
Don't roll your own passive watchdog tickle as this would defeat the
purpose of an active (userland) watchdog tickle.
ichwd.c / ipmi.c:
WD_ACTIVE means active patting of the watchdog by a userland process,
not whether the watchdog is active. See sys/watchdog.h.
kern_clock.c:
(software watchdog) Remove a check for WD_ACTIVE as this does not make
sense here. This reverts r1.181.
o fixed a comment
o made in kernel libalias a bit less verbose (disabled automatic
logging everytime a new link is added or deleted)
Approved by: glebius (mentor)
work:
- A new PCI quirk (PCI_QUIRK_DISABLE_MSI) is added to the quirk table.
- A new pci_msi_device_blacklisted() determines if a passed in device
matches an MSI quirk in the quirk table. This can be overridden (all
quirks ignored) by setting the hw.pci.honor_msi_blacklist to 0.
- A global blacklist check is performed in the MI PCI bus code by checking
to see if the device at 0:0:0 is blacklisted.
Tested by: jdp
1) s/mi/mfi/ in FreeBSD ioctl path
2) add in "\n" on various failure messages
3) cap the length of time to abort an AEN command
4) fix passing sense data back to user to make Dell's Linux firmware
upgrade tool happy.
5) bump the MFI_POLL_TIMEOUT_SECS from 10s to 50s since the
firmware flash command can take ~40s to return.
This is some clean-up and enables RAID firmware to updated via Dell's
tool. Note Dell's tool requires the updates to the Linux emulator
that has been done in -current with TLS etc.
I need to discuss with scottl how to better submit mfi commands to
the firmware via the ioctl path so we don't do it in polled mode.
2) Fix all "magic numbers" to be constants.
3) A collision case that would generate two associations to
the same peer due to a missing lock is fixed.
4) Added tracking of where timers are stopped.
Approved by: gnn
by vnode. Allow for md thread and the thread that owns lock on vnode
backing the md device to do the write even when runningbufspace is
exhausted.
Tested by: Peter Holm
Reviewed by: tegge
MFC after: 2 weeks
have been added erroneously, and it causes problems on some chips. A larger
change is needed to do this write at a more appropriate place, but that
change requires reworking the ASF logic. That will be worked on in the
future.
Submitted by: Bruce Evans
o no more ds_vdata in tx/rx descriptors
o split h/w tx/rx descriptor from s/w status
o as part of the descriptor split change the rate control module api
so the ath_buf is passed in to the module so it can fetch both
descriptor and status information as needed
o add some const poisoning
Also for sample rate control algorithm:
o split debug msgs (node, rate, any)
o uniformly bounds check rate indices (and in some cases correct checks)
o move array index ops to after bounds checking
o use final tsi from the status block instead of the h/w descriptor
o replace h/w descriptor struct's with proper mask+shift defs (this
doesn't belong here; everything is known by the driver and should
just be sent down so there's no h/w-specific knowledge)
MFC after: 1 month
o remove os-specific glue code; it's now the responsibility of
the driver
o add wackelf utility for patching the ELF magic number on arm
builds since noone can agree on how to mark a .o file as not
having any floating point instructions
o remove radar/dfs-related entry points; folks have finally
decided how to support dfs w/o polluting the hal
o properly recognize AR2424 chips (they were being rejected on
attach despite being fully supported)
o add HAL_CAP_RXORN_FATAL capability to control how RXORN errors
are handled; previously RXORN was always treated as fatal because
older chips required a reset; now we do not treat it as fatal
for "newer chips" (noone seems to know what the cutoff is so
this capability can be used to override the current guestimate)
o HAL_CAP_RXTSTAMP_PREC capability to export the number of bits
of precision for timestamp data returned in the rx descriptor
o remove public exposure of the compression buffer; it is chip
specific and never belonged in the public view
o change definition of HAL_INT_GLOBAL from an enum member to a
#define to workaround compilers that bitch about enum values
that appear overflow 31 bits
o add support for newer chips that can store the tkip mic key
together with the cipher key in a single key cache entry
o split tx/rx descriptor into a h/w section and a s/w portion;
this permits storing the s/w area in cached memory when the
h/w area is stored in uncached memory; this also shrinks
memory use since only one status block is needed while multiple
tx/rx descriptors may be required per frame
o add final transmit series index to the transmit descriptor status
so rate control algorithms don't need to grovel through h/w state
to find it
o remove ds_vdata field from the descriptor state as part of the
radar changes
o fix excessive stack usage for some 5212 rf backends
o correct rfkill handling when the pin polarity is 0 true
o correct handling of tsf wrap when reading 64-bit values
MFC after: 1 month
kernel. This LOR snuck in with some of the recent syncache changes. To
fix this, the inpcb handling was changed:
- Hang a MAC label off the syncache object
- When the syncache entry is initially created, we pickup the PCB lock
is held because we extract information from it while initializing the
syncache entry. While we do this, copy the MAC label associated with
the PCB and use it for the syncache entry.
- When the packet is transmitted, copy the label from the syncache entry
to the mbuf so it can be processed by security policies which analyze
mbuf labels.
This change required that the MAC framework be extended to support the
label copy operations from the PCB to the syncache entry, and then from
the syncache entry to the mbuf.
These functions really should be referencing the syncache structure instead
of the label. However, due to some of the complexities associated with
exposing this syncache structure we operate directly on it's label pointer.
This should be OK since we aren't making any access control decisions within
this code directly, we are merely allocating and copying label storage so
we can properly initialize mbuf labels for any packets the syncache code
might create.
This also has a nice side effect of caching. Prior to this change, the
PCB would be looked up/locked for each packet transmitted. Now the label
is cached at the time the syncache entry is initialized.
Submitted by: andre [1]
Discussed with: rwatson
[1] andre submitted the tcp_syncache.c changes
controller. Due to lack of documentation, this driver is based on the
code from sk(4) and Marvell's myk(4) driver for FreeBSD. I've also
adopted the OpenBSD interface name, msk(4) in order to reduce naming
differences between BSDs.
The msk(4) driver supports the following Gigabit Ethernet adapters.
o SysKonnect SK-9Sxx Gigabit Ethernet
o SysKonnect SK-9Exx Gigabit Ethernet
o Marvell Yukon 88E8021CU Gigabit Ethernet
o Marvell Yukon 88E8021 SX/LX Gigabit Ethernet
o Marvell Yukon 88E8022CU Gigabit Ethernet
o Marvell Yukon 88E8022 SX/LX Gigabit Ethernet
o Marvell Yukon 88E8061CU Gigabit Ethernet
o Marvell Yukon 88E8061 SX/LX Gigabit Ethernet
o Marvell Yukon 88E8062CU Gigabit Ethernet
o Marvell Yukon 88E8062 SX/LX Gigabit Ethernet
o Marvell Yukon 88E8035 Gigabit Ethernet
o Marvell Yukon 88E8036 Gigabit Ethernet
o Marvell Yukon 88E8038 Gigabit Ethernet
o Marvell Yukon 88E8050 Gigabit Ethernet
o Marvell Yukon 88E8052 Gigabit Ethernet
o Marvell Yukon 88E8053 Gigabit Ethernet
o Marvell Yukon 88E8055 Gigabit Ethernet
o Marvell Yukon 88E8056 Gigabit Ethernet
o D-Link 550SX Gigabit Ethernet
o D-Link 560T Gigabit Ethernet
Unlike OpenBSD/NetBSD msk(4), the msk(4) driver supports all hardware
features including TCP/UDP checksum offload for transmit, MSI, TCP
segmentation offload(TSO), hardware VLAN tag stripping/insertion,
and jumbo frames(up to 9022 bytes). The only unsupported hardware
feature except RLMT is Rx checksum offload which I don't know how to
make it work reliably.
Known Issues:
It seems msk(4) does not work on the second port of dual port NIC.
(The first port works without problems.)
Thanks to Marvell for releasing the BSD licensed myk(4) driver and
thanks to all users helped fixing bugs.
Tested by: bz, philip, bms,
YAMAMOTO Shigeru < shigeru AT iij DOT ad DOT jp >,
Dmitry Pryanishnikov < dmitry AT atlantis DOT dp DOT ua >,
Jia-Shiun Li < jiashiun AT gmail DOT com >,
David Duchscher < daved AT tamu DOT edu >,
Arno J. Klaassen < arno AT heho DOT snv DOT jussieu DOT fr>,
Nicolae Namolovan < adrenalinup AT gmail DOT com>,
Andre Guibert de Bruet < andy AT siliconlandmark DOT com >
current ML
Tested on: i386, amd64
subtypes of HT capabilities.
- Add constants for the MSI mapping window HT PCI capability.
- On i386 and amd64, enable the MSI mapping window on any HT bridges we
encounter and report any non-standard mapping window addresses.
pcib_alloc_msix() methods instead of using the method from the generic
PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI
specific logic soon.
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
This is the "+ one more change" missed in the original commit.
Noticed by: tinderbox
Pointy hat to: me (#1)
In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
- Use the appropriate register writing method when reseting the chip
- Program the descriptor DMA engine correctly.
- More reliably detect certain chips and their features.
Also add some low-level debugging tools to help future work on this driver.
Submitted by: David Christenson (proof of concept changes)
Sponsored by: www.UIA.net
This is easy to reproduce for EROFS. I am not sure if the attrs can be corrupt
for other NFS error responses. For now, disabling wcc pre-op attr checks and
post-op attr loads on NFS errors (sysctl'ed).
Reported by: Kris Kennaway
- Correct RX packet drop counter for BCM5705+. This register is read/clear
and it wraps very quickly under heavy packet drops because only the lower
ten bits are valid according to the documentation. However, it seems few
more bits are actually valid and the rest bits are always zeros[1].
Therefore, we don't mask them off here. To get accurate packet drop count,
we need to check the register from bge_rxeof(). It is commented out for now,
not to penalize normal operation. Actual performance impact should be
measured later.
- Correct integer casting from u_long to uint32_t. Casting is not really
needed for all supported platforms but we better do this correctly[2].
Tested by: bde[1]
Suggested by: bde[2]
o Remove unused static global variable e1000phy_debug.
o Take advantage of mii_phy_dev_probe().
o Use MII_ANEGTICKS/MII_ANEGTICKS_GIGE instead of magic number 5.
o Add IFM_NONE as e1000phy(4) supports it without issues.
o Nuke magic PHY programming sequence in PHY reset and follow correct
reset sequence. [1]
o Make manual media selection work for all supported media types.
o Don't set MIIF_NOISOLATE so e1000phy(4) can be used in
configurations with multiple PHYs.
o In 1000baseT, when setting the link manually, one side must be the
master and the other the slave. If LINK0 is set, program the PHY
to be a master, otherwise it's a slave.
o When we lost a link, reset mii_ticks immediately so it correctly
check number of seconds elapsed in autonegotiation phase.
o Announce link loss right after it happens.
o After kicking autonegotiation, report PHY status instead of
returning immediatly.
o When link state check is in progress, check auto negotiation
completion bit only when auto negotiation is enbaled.
o When PHY is resolved to a master, show it with IFM_FLAG2.
Special thanks to marius who fixed several nits in original patch.
In half-duplex mode, nfe(4) fails to send packets. I think it's a bug
in nfe(4) as the same PHY works without problems on msk(4).
Obtained from: em(4) [1]
Reviewed by: marius
Tested by: bz
