is not implied by -Wall as claimed by gcc.1. Adding it causes a
measly 7193 new warnings for LINT, mostly for "unused parameter" and
"comparison between signed and unsigned".
There are only skeletons left here; they merely serve as a backup to
include the real versions under ${PORTSDIR}/Mk while we update the ports
tree to include them directly.
<bsd.libnames.mk> is included regardless of the object file format.
This is needed to fix the a.out PAM breakage that manifests itself
when trying to build login.
When linking statically, LIBPAM is augmented with the extra libraries
that the PAM modules require. The idea is to centralize this
information rather than scattering it about in the Makefiles of
all the applications that use (OK, will use) PAM.
There is a new variable MINUSLPAM that should be used instead of
"-lpam". In the static case, it gets -l flags for the extra required
libraries.
This approach was suggested by <bde>, but he didn't actually review
my changes.
building dlopen-able modules, and add features needed to build a
static PAM library. I think I cleaned it up some, too, but beauty
is in the eye of the beholder.
You can now build a shared library without version numbers, by
defining SHLIB_NAME to something like "pam_unix.so". If SHLIB_MAJOR
and/or SHLIB_MINOR are set, SHLIB_NAME gets the usual default value,
but it can be overridden if desired. If none of these symbols are
set, no shared library is built.
SHLIB_LINK controls the name of the symbolic link that points to
the library. If it is unset, no link is made. In the usual case,
it gets the right default: e.g., "libc.so" for ELF, nothing for
a.out. This can be overridden.
STATICOBJS can be set to a list of extra object files that should
be added to the static library but not to the shared library.
These objects are added to the profiled library too.
These changes should make it easy to use <bsd.lib.mk> for building
things such as PAM modules and dynamic linkers, for which <bsd.prog.mk>
has been abused until now.
(as given by "uname -m") by which you can specify which
architectures the port is appropriate for.
Idea borrowed from: NetBSD, OpenBSD
Reviewed by: simokawa
(2) New variable PERL_ARCH (value: ${ARCH}-freebsd) that is also
passed to ${PLIST_SUB}. Use it to simplify PLISTs.
Submitted by: simokawa
(3) Check OSVERSION as well as existence of /usr/bin/perl5 before
assuming USE_PERL5 is to be a no-op. Basically to allow building
of 2.2-INDEX on a 3.0 machine.
(4) Change USE_QT definition to use new shlib version (2) and
directory (qt142).
(5) Uncomment temporary Motif dependency for parallel package
building. We still need to figure out a way to install the pkg
database files, but it's a start.
(6) Move EXTRACT_SUFX up into the pre.mk area so it can be used in
exists() tests.
(7) Add MASTER_SITE_COMP_SOURCES. Note that this is defined like
"/pub/usenet/comp.sources.%SUBDIR%/" so you can specify something
like "SUBDIR=x/volume18" to select the newsgroup as well as
subdirectory name.
Submitted by: "distfiles" fenner
(8) Other misc. master site cleanup.
Submitted by: "distfiles" fenner
(9) New target "maintainer". I intend to use it to auto-mail failure
build failure notices to the maintainer.
than ".so". The old extension conflicted with well-established
naming conventions for dynamically loadable modules.
The "clean" targets continue to remove ".so" files too, to deal with
old systems.
don't recurse in "make describe". The new INDEX target in
ports/Makefile invokes a perl script to recurse and convert them
into package names.
While I'm here, change the name of targets and move them around a
little bit for the sake of consistency.
It is also probably worth noting here that the meaning of the
"build dependency" list in INDEX has been changed slightly
changed. The old list was "build depends and its build depends"
-- not particularly useful if you had things like autoconf, which
run-depend on gm4 (you install all the things listed here and
you'll get an autoconf that won't run).
It is now "build depends and its run depends" -- you install
everything listed here, and you'll be able to build the port.
Submitted by: steve
(0') Fast README.html generation. It uses ports/INDEX to find
dependencies instead of embarking on to a recursive loop.
Submitted by: steve
(1) Remove NO_WRKDIR and NO_EXTRACT. Their functionality are easily
replacable with NO_WRKSUBDIR=t and EXTRACT_ONLY= (nothing on right
side), and they get in the way of read-only port trees.
(2) Surround first few variable definitions with ".if !defined()".
This will make cross-compilation easier and also speed up make
processes.
(3) Call sysctl with absolute path. Prefer the one in /sbin over the
one in /usr/sbin.
(4) Add four new variables
PKGINSTALL?= ${PKGDIR}/INSTALL
PKGDEINSTALL?= ${PKGDIR}/DEINSTALL
PKGREQ?= ${PKGDIR}/REQ
PKGMESSAGE?= ${PKGDIR}/MESSAGE
and use them in PKG_ARGS. Frobbing with PKG_ARGS directly is
strongly discouraged.
(5) Change PKG_SUFX to ".tar" (instead of ".tgz") if PKG_NOCOMPRESS is
defined. This is intended only for our own use.
(6) Add more sites to MASTER_SITE_GNU.
Submitted by: billf
(7) Override MANUAL_PACKAGE_BUILD if PARALLEL_PACKAGE_BUILD is
defined. This is intended only for our own use.
(8) Add new target "ignorelist" which will print out the package name
if the port is not going to be built on this machine. This is
intended only for our own use.
(9) Make mtree a little quieter.
break one way or another. With it goes the package-loop and the
describe loop.
(2) Add new variable MASTERDIR to make it easier to share files between ports.
bsd.port.mk will find things like ${PKGDIR} underneath
${MASTERDIR} (which defaults to ${.CURDIR}).
(3) Do not allow MD5_FILE to be renamed. Funny things can happen if
you do that.
(4) Use a few more absolute paths in the bsd.port.pre.mk part. I
can't use absolute paths for sysctl because it moved recently.
a few variables that could be used in the port Makefile for ".if exists()"
tests. bsd.port.post.mk defines the rest.
Note: if you define USE_X_PREFIX or USE_IMAKE, put it before including
bsd.port.pre.mk. These are the only two variables used in the first part.
In reality, bsd.port.pre.mk and bsd.port.post.mk just include bsd.port.mk
with special variables to turn part of it off.
list. The old MAKE_FLAGS was a little hard to use since it had a weird
default ("-f").
Suggested by: Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
(2) Add new targets clean-restricted and clean-for-cdrom, which will
delete RESTRICTED and NO_CDROM packages and distfiles from the top.
Reviewed by: jkh
(3) Add depends to list of things to recurse on. It will help people
who are trying to fetch some ports plus their dependencies.
Requested by: Chris Dillon <cdillon@wolves.k12.mo.us>
packages from a single port. LOOP_VAR is the name of the variable
and LOOP_OPTIONS is a space-separated list of values it should
take. When these are set, the target "package-loop" will go
through a clean and package loop for all the options. The
"package-loop" target is defined as "package" when LOOP_VAR is not
defined, so if you are in the business for building packages, you
should use "package-loop" all the time. (This target is added to
bsd.port.subdir.mk too.)
Also, the "describe" target prints out multiple lines so that all
options will go into the INDEX. (In other words, if you define
these variables, INDEX is going to look real silly if you don't
put ${${LOOP_VAR}} in PKGNAME.)
Seconded by: obrien ("ANYTHING")
(2) Turn off regexp support for LIB_DEPENDS. It is a fixed string of
the form <NAME>.<VER> now.
Tested by: several rounds of complete package builds
(3) Check checksum even if NO_EXTRACT is defined.
(4) Cosmetic fix for message in MANUAL_PACKAGE_BUILD case.
Alpha. This is a minor, but important distinction. Should be a no-op
to the install base. If OBJFORMAT is set elsewhere, things work
exactly as they did before.
name conversion. Use it for binary ports that come with its own private
shlib dirs, ports that install linux compatibility libraries (thus following
their naming conventions and not ours), etc.
Reviewed by: Martin Cracauer <cracauer@FreeBSD.ORG>
version number part (i.e., "<directory>/perl"). Use this to
substitute #! lines in your perl5 scripts.
Requested and reviewed by: ache
(2) Add new variable WRKDIRPREFIX (defaults to ""). The "work"
directories are now in ${WRKDIRPREFIX}${.CURDIR}/work by default.
You can have a read-only ports tree (modulo any broken ports that
write something to places other than ${WRKDIR}) by setting this to
a writable location.
Ports that set WRKDIR explicitly should append this to front so
they will work when the user has WRKDIRPREFIX set.
Reviewed by: Toshihiko Kodama <kodama@ayame.mfd.cs.fujitsu.co.jp>
since ports are not supposed to be broken during the process of
conversion to ELF -- please proceed with caution.)
(2) Support for checking file size before fetching. The essential
parts are commented out for now, so I won't lose the submission
while we discuss how to do it.
Submitted by: se (mostly)
(3) Don't run "fetch" twice. It was due to the change in checksum
target chaining. It used to be fetch -> checksum -> extract,
after 1.285 it was fetch -> checksum and checksum was also
explicitly called from extract. Fix it by not calling fetch from
checksum when it's invoked by extract.
Noticed by: pre-fetch target of lesstif being run twice
(4) Don't try to remove non-existent distfiles and patchfiles in
distclean.
Submitted by: anto@netscape.net
PR: 7988
Submitted by: "Eugene M. Kim" <gene@nttlabs.com>
(2) Check for exact version of perl5 in /usr/bin and exit with error
message if USE_PERL5 is defined and version does not match
${PERL_VERSION}.
(3) Note LIB_DEPENDS should not have any regular expressions. Remove
those in USE_XLIB and USE_QT.
