than one interface in one subnet. However, some userland apps rely on
the believe that this configuration is impossible.
Add a sysctl switch net.inet.ip.same_prefix_carp_only. If the switch
is on, then kernel will refuse to add an additional interface to
already connected subnet unless the interface is CARP. Default
value is off.
PR: bin/82306
In collaboration with: mlaier
lists, as well as accessor macros. For now, this is a recursive mutex
due code sequences where IPv4 multicast calls into IGMP calls into
ip_output(), which then tests for a multicast forwarding case.
For support macros in in_var.h to check multicast address lists, assert
that in_multi_mtx is held.
Acquire in_multi_mtx around iteration over the IPv4 multicast address
lists, such as in ip_input() and ip_output().
Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses,
as well as over the manipulation of ifnet multicast address lists in order
to keep the two layers in sync.
Lock down accesses to IPv4 multicast addresses in IGMP, or assert the
lock when performing IGMP join/leave events.
Eliminate spl's associated with IPv4 multicast addresses, portions of
IGMP that weren't previously expunged by IGMP locking.
Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded
lock order in WITNESS, in that order.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 10 days
if_ioctl routine. This should fix a number of code paths through
soo_ioctl() that could call into Giant-locked network drivers without
first acquiring Giant.
Add two another workarounds for carp(4) interfaces:
- do not add connected route when address is assigned to carp(4) interface
- do not add connected route when other interface goes down
Embrace workarounds with #ifdef DEV_CARP
after allowing more than one address with the same prefix.
Reported by: Vladimir Grebenschikov <vova NO fbsd SPAM ru>
Submitted by: ru (also NetBSD rev. 1.83)
Pointyhat to: mlaier
This makes it possible to have more than one address with the same prefix.
The first address added is used for the route. On deletion of an address
with IFA_ROUTE set, we try to find a "fallback" address and hand over the
route if possible.
I plan to MFC this in 4 weeks, hence I keep the - now obsolete - argument to
in_ifscrub as it must be considered KAPI as it is not static in in.c. I will
clean this after the MFC.
Discussed on: arch, net
Tested by: many testers of the CARP patches
Nits from: ru, Andrea Campi <andrea+freebsd_arch webcom it>
Obtained from: WIDE via OpenBSD
MFC after: 1 month
- Trailing tab/space cleanup
- Remove spurious spaces between or before tabs
This change avoids touching files that Andre likely has in his working
set for PFIL hooks changes for IPFW/DUMMYNET.
Approved by: re (scottl)
Submitted by: Xin LI <delphij@frontfree.net>
This enables pf to track dynamic address changes on interfaces (dailup) with
the "on (<ifname>)"-syntax. This also brings hooks in anticipation of
tracking cloned interfaces, which will be in future versions of pf.
Approved by: bms(mentor)
calling ioctl(SIOC[AS]IFADDR).
This allows the following:
ifconfig xx0 inet 1.2.3.1 netmask 0xffffff00
ifconfig xx0 inet 1.2.3.17 netmask 0xfffffff0 alias
ifconfig xx0 inet 1.2.3.25 netmask 0xfffffff8 alias
ifconfig xx0 inet 1.2.3.26 netmask 0xffffffff alias
but would (given the above) reject this:
ifconfig xx0 inet 1.2.3.27 netmask 0xfffffff8 alias
due to the conflicting netmasks. I would assert that it's wrong
to mask the EEXIST returned from rtinit() as in the above scenario, the
deletion of the 1.2.3.25 address will leave the 1.2.3.27 address
as unroutable as it was in the first place.
Offered for review on: -arch, -net
Discussed with: stephen macmanus <stephenm@bayarea.net>
MFC after: 3 weeks
This change allows bootp to work with more than one interface, at the
expense of some rather ``wrong'' looking code. I plan to MFC this in
place of luigi's recent #ifdef BOOTP stuff that was committed to this
file in -stable, as that's slightly more wrong that this is.
Offered for review on: -arch, -net
MFC after: 2 weeks
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
interface address, blow the address away again before returning the
error.
In in_ifinit(), if we get an error from rtinit() and we've also got
a destination address, return the error rather than masking EEXISTS.
Failing to create a host route when configuring an interface should
be treated as an error.
ifconfig, which expects the address returned by the SIOCGIFNETMASK ioctl
to have a valid sa_family. Similar changes may be necessary for IPv6.
While we're here, get rid of an unnecessary temp variable.
MFC after: 2 weeks
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
A route generated from an RTF_CLONING route had the RTF_WASCLONED flag
set but did not have a reference to the parent route, as documented in
the rtentry(9) manpage. This prevented such routes from being deleted
when their parent route is deleted.
Now, for example, if you delete an IP address from a network interface,
all ARP entries that were cloned from this interface route are flushed.
This also has an impact on netstat(1) output. Previously, dynamically
created ARP cache entries (RTF_STATIC flag is unset) were displayed as
part of the routing table display (-r). Now, they are only printed if
the -a option is given.
netinet/in.c, netinet/in_rmx.c:
When address is removed from an interface, also delete all routes that
point to this interface and address. Previously, for example, if you
changed the address on an interface, outgoing IP datagrams might still
use the old address. The only solution was to delete and re-add some
routes. (The problem is easily observed with the route(8) command.)
Note, that if the socket was already bound to the local address before
this address is removed, new datagrams generated from this socket will
still be sent from the old address.
PR: kern/20785, kern/21914
Reviewed by: wollman (the idea)
<sys/proc.h> to <sys/systm.h>.
Correctly document the #includes needed in the manpage.
Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
is very likely to become consensus as recent ietf/ipng mailing list
discussion. Also recent KAME repository and other KAME patched BSDs
also applied it.
s/__ss_family/ss_family/
s/__ss_len/ss_len/
Makeworld is confirmed, and no application should be affected by this change
yet.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
