to choose the best one.
The old 9x13 cursor was was sort of correct for CGA 640x200 text mode,
but distorted for all other modes. This mode is still available on
all systems with VGA, but stopped being useful in ~1985. It has very
unsquare pixels with an aspect ratio of 240:100 on 4:3 monitors. On
16:9 monitors, the unsquareness in this mode is reduced to only 180:100
iff the monitor stretches the pixels to the full screen.
Newer modes and systems have smaller distortions, but with many more
variations. Square pixels first became common with VGA 640x480 mode
on 4:3 monitors. However, standard VGA text mode also has 9-bit wide
characters and only 25 lines, so it has 720x400 pixels. This has
unsquare pixels with an aspect ratio of 135:100 on 4:3 monitors. On
16:9 monitors, it gives almost-square pixels with an aspect ration of
101:100 iff the monitor stretches, but in modes that were square on
4:3 monitors square similar monitor stretching breaks the squareness.
Guess the physical aspect ratio using heuristics. The old version of
X that I use is further from doing this using info from PnP monitors
that is unavailable in syscons (X doesn't understand if the monitor
is doing stretching and doesn't even understand how its its own mode
changes affect the pixel size). Monitors with aspect ratio control
should be configured to _not_ stretch 4:3 modes to 16:9. Otherwise,
use the machdep.vga_aspect_scale sysctl to compensate. Only 1 of my
4 monitors/laptops requires this. It always stretches to 16:9.
The mouse data has new aspect ratio fields for selecting the best
cursor and a new name field for display in debugging messages.
Selecting the mouse cursor is now a slow operation so it is not done
for every drawing of the cursor. To avoid a new initialization method,
it is done whenever the text cursor is set or changed. Also remove
dead code in settings of text cursors.
Use larger mouse cursors (sometimes the full 10x16 one) for 8x8 fonts
in cases where this works better (mostly in graphics mode).
To mostly fix distortion of mouse cursors by non-square pixels, I
needed 8 variants of the same cursor shape for large fonts and
another 7 variants for small fonts. Some variants are shared,
leaving only 13 variants in 26 glyphs altogether. Keep these in
the BDF source file cursor.bdf. cursor.bdf has another 5 unused
experimental cursors in 10 glyphs. cursor.awk is a simple awk
script for converting this and similar bdf files into C declarations
for copying into scvgarndr.c. syscons doesn't use any of this yet.
programmed for infinite IN token retry after NAK, the SAF1761
hardware, however, does not retry the IN-token. This problem is
described in the SAF1761 errata, section 18.1.1.
While at it:
- Add some minor chip specific initialization for RTEMS.
- Add debug print for status registers in the interrupt filter.
Submitted by: Christian Mauderer <christian.mauderer@embedded-brains.de>
MFC after: 1 week
similar to "if (ticks > localvar+interval) {localvar=ticks; ...}" where
localvar is initialized to zero. Ticks is initialized to a negative value
since r278230, and that leads to these if statements never being true.
Remove any chipset specific usage of Rx descriptor structure / bits
from common code to prevent misuse of fields that may differ
between various chipsets.
Checked with: RTL8821AU in STA mode.
gcc produces a "variably modified X at file scope" warning for
structures that use these size definitions.
PR: 211540
Reviewed by: markj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential revision: https://reviews.freebsd.org/D11416
This addresses a deadlock during boot when EARLY_AP_STARTUP is configured:
a taskqueue thread may call pause() with an ACPI mutex held, and thread0
may block on this mutex before configuring the eventtimer. In this case
the taskqueue thread will sleep forever waiting for its callout to fire.
PR: 220277
Submitted by: jhb
MFC after: 3 days
Includes:
- Support for X550EM devices.
- Support for Bypass adapters.
- Flow Director code moved to separate files
- SR-IOV code moved to separate files
- Netmap code moved to separate files
Differential Revision: https://reviews.freebsd.org/D11232
Submitted by: Jeb Cramer <cramerj@intel.com>
Reviewed by: erj@
Tested by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Sponsored by: Intel Corporation
Collapse should be more effective than defragmentation.
Added missing declaration of ena_check_and_collapse_mbuf().
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
TSO settings were not reflecting real HW capabilities.
DMA tags were created with wrong window - high address was the same as
low, so excluding window was not working.
Capabilities of TX dma transaction were not set properly - TSO max size
had been increased and size of one segment had been adjusted.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
RX lock is no longer required. There can only be one RX cleanup task
running at a time, RX cleanup cannot be executed if interface is not
yet initialized and ena_down() will not free any RX resources if any io
interrupt is being handled - RX cleanup task is only called from an
interrupt handler.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
If drbr_advance() is not called before doing cleanup and packet is
already enqueued for sending (tx_info is holding pointer to mbuf), then
mbuf is cleaned both in drbr_flush() and in cleanup routine, when all
mbufs hold by tx_buffer_info are being released.
This causes panic, because mbuf is released twice.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
If driver left MSI-x handlling routine because interface was put down,
it is not unmasking IRQs, so any requesting interrupt will be awaiting
for unmasking.
On ena_up() routine all interrupts are being unmasked and any awaiting
interrupt will be handled right away.
If handler was executed before driver state was set as running, handling
routine is being ended immediately, leaving IO irqs for given queue
masked.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
It is required to hold lock that is associated with buffer ring before
flushing drbr.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Lack of this lock was causing crash if down was called in
parallel with the initialization routine.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
the commit message; as actually implemented, the intent is to retry
up to 2 ms for controllers to enable bus power.
Noticed by: ian@, rgrimes@
Additional note: Among others, the problem addressed by r320577 is
the APL32 ("Storage Controllers May Not Be Power Gated") erratum.
Hopefully, along with r318282, r320577 works around the remaining
problems seen with Intel Apollo Lake eMMC and SDXC controllers.
iflib - reset fl-ifl_fragidx to 0 on iflib_fl_bufs_free(). This caused the
panic in em/igb when adding it to a bridge device.
iflib - Handle out of order packet delivery from hardware in support of LRO
Out of order updates to rxd's is fixed in r315217. However, it is not
completely fixed. While refilling the buffers, iflib is not considering
the out of order descriptors. Hence, it is refilling sequentially.
"idx" variable in _iflib_fl_refill routine is incremented sequentially.
By doing refilling sequentially, it will override the SGEs that
are *IN USE* by other connections. Fix is to maintain a bitmap of
rx descriptors and differentiate the used one with unused one and
refill only at the unused indices. This patch also fixes a
few bugs in bnxt, related to the same feature.
Submitted by: bhargava.marreddy@broadcom.com
Reviewed by: venkatkumar.duvvuru@broadcom.com shurd
Differential Revision: https://reviews.freebsd.org/D10681
Instead of using GID_FT SNS request to get list of registered FCP ports,
use GID_PT to get list of all Nx_Ports, and then use GFF_ID and/or GFT_ID
requests to find whether they are FCP and target capable.
The problem with old approach is that GID_FT does not report ports without
FC-4 type registered. In particular it was impossible to boot OS from
FreeBSD FC target using QLogic FC BIOS, since one does not register FC-4
type even on new cards and so ignored by old code as incompatible.
As a side bonus this allows initiator to skip pointless logins to other
initiators by fetching that information from SNS instead.
In case some switches do not implement GFF_ID/GFT_ID correctly, add sysctls
to disable that functionality. I handled broken GFF_ID of my Brocade 200E,
but there may be other switches with different bugs.
Linux also uses GID_PT, but GFF_ID is disabled by default there, and GFT_ID
is not supported.
Sponsored by: iXsystems, Inc.
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
gcc produces a "variably modified X at file scope" warning for
structures that use these size definitions. I think the definitions are
actually fine but can be rephrased with the __CONST_RING_SIZE macro more
cleanly anyway.
Reviewed by: markj, royger
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential revision: https://reviews.freebsd.org/D11417
For ATIOs it is pointless to report isp_loopid to CAM, since in other
places it operates with port database record IDs, not with loop IDs.
For INOTs target_id/target_lun seems were never set, so wildcard INOTs
probably were not working correctly when LUN IDs were important.
which is able to manipulate the clock and data lines directly.
When an i2c bus is hung by a slave device stuck in the middle of a
transaction that didn't complete properly, this function manipulates the
clock and data lines in a sequence known to reliably reset slave devices.
The most common cause of a hung i2c bus is a system reboot in the middle of
an i2c transfer (so it doesnt' happen often, but now there is a way other
than power cycling to recover from it).
nostop option is set, if a start was issued.
The nostop option doesn't mean "never issue a stop" it means "only issue
a stop after the last in a series of transfers". If the transfer ends
due to error, then that was the last transfer in the series, and a stop
is required.
Before this change, any error during a transfer when nostop is set would
effectively hang the bus, because sc->started would never get cleared,
and that caused all future calls to iicbus_start() to return an error
because it looked like the bus was already active. (Unrelated errors in
handling the nostop option, to be addressed separately, could lead to
this bus hang condition even on busses that don't set the nostop option.)
the "effective MSS" for the connection. The chip expects it this way.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
Add io_mapping_init_wc() and add a third (unused) parameter to
io_mapping_map_wc().
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11286
On some windows hosts TEST_UNIT_READY command will return
SRB_STATUS_ERROR and sense data "NOT READY asc:3a,1 (Medium
not present - tray closed)", this occurs periodically, and
not hurt anything else. So, we prefer to ignore this kind
of errors.
PR: 219973
Submitted by: Hongjiang Zhang <hongzhan microsoft com>
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11271
being overwritten, they are set only bits (cleared by hardware).
Disable the Acknowledge of the controller slave address. The slave mode is
not supported.
Make sure the interrupt flag bit is being cleared as recommended, add a
delay() _after_ clear the interrupt bit.
Sponsored by: Rubicon Communications, LLC (Netgate)
Clang 4.0 accepts the smc instruction with or without specifying
.arch_extension sec, but Clang 5.0 produces an error without it.
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
