For libssp.so, rebuild stack_protector.c with FORTIFY_SOURCE stubs that just
abort built into it.
For libssp_nonshared.a, steal stack_protector_compat.c from
^/lib/libc/secure and massage it to maintain that __stack_chk_fail_local
is a hidden symbol.
libssp is now built unconditionally regardless of {WITH,WITHOUT}_SSP in the
build environment, and the gcclibs version has been disconnected from the
build in favor of this one.
PR: 242950 (exp-run)
Reviewed by: kib, emaste, pfg, Oliver Pinter (earlier version)
Also discussed with: kan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22943
The freebsd-binutils and freebsd-gcc* packages install toolchain
makefiles to /usr/share/toolchains rather than LOCALBASE.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D22985
TARGET=arm now defaults to TARGET_ARCH=armv7
TARGET_ARCH=arm is no longer valid.
Bump __FreeBSD_version to 1300073
Tested with make universe. Any stale LINT-V5 config files remaining in the tree
will fail the universe build. However, LINT-V5 was removed in r355119.
This retirement has been planned since last summer. The armv5 port is fragile:
it works OK for some peeople, and fails badly for others. There's a number of
subtle bugs in busdma, pmap and other MD parts of thee system that present
themselves under load or in unusual circumstances (like fsck after a
crash). stable/8, branched 10 years ago, was the last reliable release. Since
the support burden is larger then the benefit, the consensus view is armv5
should be removed from the tree.
Discussed with: arm@ mailing list and arm developer community.
The warning was added in r289728 (over four years ago) and at that time
NO_CLEAN was already the correct spelling for over a decade.
Make NOCLEAN an error as the next step to removing these backward
compatibility shims.
This is due to LLD_REVISION_STRING being renamed to LLD_REVISION in
r351442 and the value being moved to another location in r351965.
`make test-system-linker` can be used to see the values being used here.
Reported by: ler
flua is bootstrapped as part of the build for those on older
versions/revisions that don't yet have flua installed. Once upgraded past
r354833, "make sysent" will again naturally work as expected.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D21894
MK_CLANG_IS_CC controls installing links for GCC, not just clang. Set
MK_CLANG_IS_CC to the value of MK_CLANG_BOOTSTRAP. This will leave it
as "no" if no bootstrap compiler is being built or GCC 4.2.1 is being
used as the bootstrap compiler, and "yes" if clang is being used as
the bootstrap compiler.
Submitted by: bdrewery (kind of, he suggested this on IRC while I was
testing the original patch)
Reviewed by: kevans, imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22350
This ensures that a bootstrap clang compiler is always installed as cc
in WORLDTMP. If it is only installed as 'clang' then /usr/bin/cc is
used during the build instead of the bootstrap compiler.
Reviewed by: imp
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22332
Previously we checked for only BINUTILS_BOOTSTRAP as a broken option
and suggested installing the binutils package. This was originally done
for arm64 where we used the in-tree Clang with external binutils package.
Add a case to the warning to suggest instead the full xtoolchain package
if we have no in-tree compiler either.
Differential Revision: https://reviews.freebsd.org/D21851
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Reviewed by: imp, kib
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
Add lib/libzstd to _elftoolchain_libs
tools/build/Makefile needs to create the install dir for libzstd
Since this would make the line too long, rework to use a list
in one per line format (easier to add in future)
and dispense with the .for loop
Reviewed by: emaste bapt
Differential Revision: https://reviews.freebsd.org/D220134
opensolaris_atomic.S is now only used on i386 with opensolaris_atomic.c
used on other platforms. After r353381 it doesn't exist on those
platforms so the stale dependency would result in a build error.
r353408 addressed this issue for cddl/lib/libzpool, but it persisted
with the opensolaris and zfs modules.
This should change nothing for kernel configurations at the standard
locations in the source tree. However, if KERNCONFDIR is used to
specify a custom location for a kernel configuration file (e.g., out of
tree), then both the custom location and the standard location, in this
order, will be used as include paths for config(8). This will allow the
kernel configuration to include files from both locations.
Reviewed by: bdrewery
MFC after: 16 days
Differential Revision: https://reviews.freebsd.org/D22057
opensolaris_atomic.S is now only used on i386 with opensolaris_atomic.c
used on other platforms. After r353381 it doesn't exist on those
platforms so the stale dependency would result in a build error.
WITHOUT_LOCAL_MODULES can be set to disable LOCAL_MODULES for native
builds. WITH_LOCAL_MODULES can be set to leave it enabled for cross
builds.
This does not use a knob in kern.opts.mk because the options framework
does not currently support options whose default varies on the build
type. I discussed a few options there with Warner (e.g. maybe having
a tri-state where the default value is "auto" and having Makefile.inc1
apply logic when MK_LOCAL_MODULES is set to "auto"), but Warner ok'd
this approach for now until a better solution is implemented.
Requested by: many
Reviewed by: imp (in person at EuroBSDCon)
Differential Revision: https://reviews.freebsd.org/D21608
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
Note that old pkg will failed to build after this. A recent ports tree (one
providing pkg 1.12+) is required to build. Older already built pkg, should
continue working as expected
PR: 238797
Exp run by: antoine
Reviewed by: cem
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20752
Currently APLHA packages are treated as CURRENT or STABLE versions,
resulting in e.g. 13.0.s20190615125609. This version number is indeed
different from the next version number but ALPHA2 would be nicer IMO.
For the BETA, PRERELEASE and RC phases the packages are versioned the
same as for releases, so 11.3-BETA1 is 11.3 and so is 11.3-RC1, meaning
that pkg cannot easiliy upgrade from the former the next. This happened
on my Raspberry Pi which runs pkgbase.
Submitted by: rene
Approved by: manu
Event: Berlin hackathon 2019
Differential Revision: https://reviews.freebsd.org/D20651
the followup stopgap change, because I don't think it's a correct. I still
need to figure out where to stick it in. In cannot be in Makefile.inc1
and it cannot be in etc/Makefile from the looks of it to avoid
chicken-and-egg problem.
install -> ${INSTALL}
mtree -> ${MTREE_CMD}
services_mkdb -> ${SERVICES_MKDB_CMD}
cap_mkdb -> ${CAP_MKDB_CMD}
pwd_mkdb -> ${PWD_MKDB_CMD}
kldxref -> ${KLDXREF_CMD}
If you do custom FreeBSD builds you may want to override those
in some cases.
Sponsored by: Sippy Software, Inc.
