From UEFI specification 2.8, page 434:
"It should also be noted that certain input devices may not be able to produce
shift or toggle state information, and in those cases the high order bit in
the respective Toggle and Shift state fields should not be active."
But we still need to check for ScanCode and UnicodeChar.
PR: 242660
Reported by: Trond Endrestol
MFC after: 1 week
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Just as disks can have nested partitions, the same happens with cd devices,
so we need to detect device paths and make sure we will not mix the handles.
To address this:
we fetch handle array and create linked list of block devices.
we walk the list and detect parent devices and set children pd_parent.
for {fd, cd, hd}, we walk device list and pick up our devices and store to
corresponding list. We make sure we store parent device first.
For sorting we use 3 steps: We check for floppy, we check for cd and then
everything else must be hd.
In general, it seems the floppy devices have no parent.
CD can have both parents and children (multiple boot entries, partitions
from the hybrid disk image).
Tested by: cross+freebsd@distal.com on Cisco UCS systems, C200 series (C220M5, C240M4).
Also on MBP with UEFI 1.10
Reported by: Chriss Ross
MFC after: 1w
Differential Revision: https://reviews.freebsd.org/D22553
RB_MULTIPLE without RB_SERIAL set is valid, and means 'Video first, then serial'
to the kernel (so kernel messages go to both, but /etc/rc uses video console
(this should be fixed, btw, but another day)). Check for RB_MULTIPLE as well as
RB_SERIAL where we want to to serial things. This means we'll use the old code
for emulation in these situations, which is likely best since we're outputing to
both and the old code is ligher weight allowing both to keep up w/o weird
scrolling things.
With a very large kernel or module the staging area may be too small to
hold it. When this is the case try to allocate more space before failing
in the efi copyin/copyout/readin functions.
Reviewed by: imp, tsoome
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22569
In the EFI implementation in U-Boot no ConOut efi variable is created,
this cause loader to fallback to TERM_EMU implementation which is very
very very slow (and uses the ConOut device in the system table anyway).
The UEFI spec aren't clear as if this variable needs to exists or not.
Reviewed by: imp, kevans
UEFI 1.10 on macs does not seem to provide devpath to name translation,
provide our own (limited) version, so we can get information about commmon
devices.
MFC after: 1 week
The macos does create Vendor Media devices on top of APFS container
(like partition table inside the partition), so we need to collect such
devices into respective device tree.
MFC after: 1 week
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
In case of efi console having serial backend (video + serial or only serial),
we need to stick with old emulator till we can draw console.
Eventually we would need to get console terminal emulator to be removed
from serial console because the serial link already has the terminal.
However, we need to implement comconsole on all efi platforms first, then
we need the ability to draw console, so we do not have to use SimpleTextOutput
protocol (which will write both on video and serial in case of multiplexed
ComOut).
Differential Revision: https://reviews.freebsd.org/D22161
PATH_BOOTABLE_TOKEN can be set to a non-standard
path that identifies a device as bootable.
Reviewed by: kevans, bcran
Differential Revision: https://reviews.freebsd.org/D22062
PATH_BOOTABLE_TOKEN can be set to a non-standard
path that identifies a device as bootable.
Reviewed by: kevans, bcran
Differential Revision: https://reviews.freebsd.org/D22062
Since local UEFI console is implemented on top of framebuffer,
we need to avoid redrawing the whole screen ourselves, but let
Simple Text Mode to do the scroll for us.
Add settable variables to control teken default color attributes.
The supported colors are 0-7 or basic color names:
black, red, green, brown, blue, magenta, cyan, white.
The current implementation does add some duplication which will be addressed
later.
UEFI specification 2.7A, EFI_BLOCK_IO_PROTOCOL, page 566.
The ioalign property does define the alignment of data buffer.
If the alignment is required and our buffer is not aligned, or if
the data buffer is not multiple of Blocksize, we need to use bounce buffer
to perform the block IO. This is much like with BIOS version, except
there the INT13 needs buffer to be located in low memory.
Additionally, we need to handle disk writes properly.
Replace mini cons25 emulator with teken, this does enable us proper console
terminal for loader and will make it possible to implement different
back end callbacks to draw to screen.
At this time we still only "draw" in text mode.
The cd handles should be collected as list of partitions. Some systems also
provide base name for block device (like PciRoot(0x0)/Pci(0x5,0x0)), we need
to be careful about those.
To make out life a bit easier, we prepare not just an array of handles, but we
allocate pdinfo struct for each handle and devicepath, then we can simplify
our work to sort the devices.
Differential Revision: https://reviews.freebsd.org/D21187
Reduce the size of the EFI_STAGING area we allocate on arm to 32. On arm SBC
such as the NanoPi-NEOLTS the staging area allocation will fail on the 256MB
model with a staging size of 64.
Reviewed by: bcran, manu
Approved by: bz (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21016
We should support removing vdev from boot pool. Update loader zfs reader
to support com.delphix:removing.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18901
The chain command can be used to chain load another binary.
If veriexec is enabled we should verify it first.
Note that on EFI systems the verification was already done
through firmware, assuming that Secure Boot was enabled there.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
MFC after: 1 week
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D20952
The HandleProtocol() is deprecated interface and we should use OpenProtocol()
instead. Moreover, in some firmware implementation(s), the HandleProtocol()
does return device path using static storage, so we can not keep the value
returned there. With same firmware, the OpenProtocol() does return data we
do not need to clone.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D21162
Summary:
efi loader does not work with static network parameters. It always uses
BOOTP/DHCP and also uses RARP as a fallback. Problems with DHCP servers can
cause the loader to fail to populate network parameters.
Submitted by: Siddharth Tuli <siddharthtuli_gmail.com>
Reviewed by: imp
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D20811
To avoid failures when the large 18MB nvidia.ko module is being loaded,
increase EFI_STAGING_SIZE from 64MB to 100MB on x64 systems.
Leave the other platforms at 64MB.
The code in efihttp.c was assuming that dv_open wouldn't be called if
dv_init failed. But the dv_init return value is currently ignored.
Add a new variable, `efihttp_init_done` and only proceed in dv_open if
it's true. This fixes the loader on systems without efi http support.
Add support for an HTTP "network filesystem" using the UEFI's HTTP
stack.
This also supports HTTPS, but TianoCore EDK2 implementations currently
crash while fetching loader files.
Only IPv4 is supported at the moment. IPv6 support is planned for a
follow-up changeset.
Note that we include some headers from the TianoCore EDK II project in
stand/efi/include/Protocol verbatim, including links to the license instead
of including the full text because that's their preferred way of
communicating it, despite not being normal FreeBSD project practice.
Submitted by: scottph
Reviewed by: imp, bcran
Differential Revision: https://reviews.freebsd.org/D20643
