Remove the KAME introduced PULLDOWN_TESTs which did not even
have a compile-time option in sys/conf to turn them on for a
custom kernel build. They made the code a lot harder to read
or more complicated in a few cases.
Convert the IP6_EXTHDR_CHECK() calls into FreeBSD looking code.
Rather than throwing the packet away if it would not fit the
KAME mbuf expectations, convert the macros to m_pullup() calls.
Do not do any extra manual conditional checks upfront as to
whether the m_len would suffice (*), simply let m_pullup() do
its work (incl. an early check).
Remove extra m_pullup() calls where earlier in the function or
the only caller has already done the pullup.
Discussed with: rwatson (*)
Reviewed by: ae
MFC after: 8 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22334
In ip6_[direct_]input() we are looping over the extension headers
to deal with the next header. We pass a pointer to an mbuf pointer
to the handling functions. In certain cases the mbuf can be updated
there and we need to pass the new one back. That missing in
dest6_input() and route6_input(). In tcp6_input() we should also
update it before we call tcp_input().
In addition to that mark the mbuf NULL all the times when we return
that we are done with handling the packet and no next header should
be checked (IPPROTO_DONE). This will eventually allow us to assert
proper behaviour and catch the above kind of errors more easily,
expecting *mp to always be set.
This change is extracted from a larger patch and not an exhaustive
change across the entire stack yet.
PR: 240135
Reported by: prabhakar.lakhera gmail.com
MFC after: 3 weeks
Sponsored by: Netflix
In preparation for another change factor out various variable cleanups.
These mainly include:
(1) do not assign values to variables during declaration: this makes
the code more readable and does allow for better grouping of
variable declarations,
(2) do not assign values to variables before need; e.g., if a variable
is only used in the 2nd half of a function and we have multiple
return paths before that, then do not set it before it is needed, and
(3) try to avoid assigning the same value multiple times.
MFC after: 3 weeks
Sponsored by: Netflix
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
Finish what was started a few years ago and harmonize IPv6 and IPv4
kernel names. We are down to very few places now that it is feasible
to do the change for everything remaining with causing too much disturbance.
Remove "aliases" for IPv6 names which confusingly could indicate
that we are talking about a different data structure or field or
have two fields, one for each address family.
Try to follow common conventions used in FreeBSD.
* Rename sin6p to sin6 as that is how it is spelt in most places.
* Remove "aliases" (#defines) for:
- in6pcb which really is an inpcb and nothing separate
- sotoin6pcb which is sotoinpcb (as per above)
- in6p_sp which is inp_sp
- in6p_flowinfo which is inp_flow
* Try to use ia6 for in6_addr rather than in6p.
* With all these gone also rename the in6p variables to inp as
that is what we call it in most of the network stack including
parts of netinet6.
The reasons behind this cleanup are that we try to further
unify netinet and netinet6 code where possible and that people
will less ignore one or the other protocol family when doing
code changes as they may not have spotted places due to different
names for the same thing.
No functional changes.
Discussed with: tuexen (SCTP changes)
MFC after: 3 months
Sponsored by: Netflix
in RFC 4620, ICMPv6 Node Information Queries. A vnet jail with an
IPv6 address sent a hostname of the host environment, not the
jail, even if another hostname was set to the jail.
This change can be tested by the following commands:
# ifconfig epair0 create
# jail -c -n j1 vnet host.hostname=vnetjail path=/ persist
# ifconfig epair0b vnet j1
# ifconfig epair0a inet6 -ifdisabled auto_linklocal up
# jexec j1 ifconfig epair0b inet6 -ifdisabled auto_linklocal up
# ping6 -w ff02::1%epair0a
Differential Revision: https://reviews.freebsd.org/D20207
MFC after: 1 week
- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
not freed. This can happen since the list traversal and locking
was converted to epoch(9). If the inp is marked "freed", skip it.
This prevents a NULL pointer deref panic in ip6_savecontrol_v4()
trying to access the socket hanging off the inp, which was gone
by the time we got there.
Reported by: andrew
Tested by: andrew
Approved by: re (gjb)
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
considered as originated by our host packet. And thus rcvif should be
NULL, since it is used by ipfw(4) to determine that packet was originated
from this host. Some of icmp6_reflect() consumers reuse mbuf and m_pkthdr
without resetting rcvif pointer. To avoid this always reset m_pkthdr.rcvif
pointer to NULL in icmp6_reflect(). Also remove such line and comment
describing this from icmp6_error(), since it does not longer matters.
PR: 227674
Reported by: eugen
MFC after: 1 week
icmp6_redirect_input() validates that a redirect packet came from the
current gateway for the respective destination. To do this, it compares
the source address, which has an embedded scope zone id, to the next-hop
address, which does not. If the address is link-local, which should be
the case, the comparison fails and the redirect is ignored.
Insert the scope zone id into the next-hop address so the comparison
is accurate.
Unsurprisingly, this fixes 35 UNH IPv6 conformance test cases.
Submitted by: Farrell Woods <Farrell_Woods@Dell.com> (initial revision)
Reviewed by: ae melifaro dab
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14254
that had the IPv6 fragmentation header:
o Neighbor Solicitation
o Neighbor Advertisement
o Router Solicitation
o Router Advertisement
o Redirect
Introduce M_FRAGMENTED mbuf flag, and set it after IPv6 fragment reassembly
is completed. Then check the presence of this flag in correspondig ND6
handling routines.
PR: 224247
MFC after: 2 weeks
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
in the icmp6_input() function.
When processing an ICMP6_ECHO_REQUEST, if IP6_EXTHDR_GET fails, it will
set nicmp6 and n to NULL. Therefore, we should condition our modification
to nicmp6 on n being not NULL.
And, when processing an ICMP6_WRUREQUEST in the (mode != FQDN) case, if
m_dup_pkthdr() fails, the code will set n to NULL. However, the very next
line dereferences n. Therefore, when m_dup_pkthdr() fails, we should
discontinue further processing and follow the same path as when m_gethdr()
fails.
Reported by: clang static analyzer
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10941
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
handling. Ensure that:
* Protocol unreachable errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Communication prohibited errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Hop Limited exceeded errors are handled by indicating EHOSTUNREACH
to the TCP user for both IPv4 and IPv6.
For IPv6 the TCP connected was dropped but errno wasn't set.
Reviewed by: gallatin, rrs
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: 7904
In icmp6_reflect() use original source address of erroneous packet as
destination address for source selection algorithm when original
destination address is not one of our own.
Reported by: Mark Kamichoff <prox at prolixium com>
Tested by: Mark Kamichoff <prox at prolixium com>
MFC after: 1 week
- Re-write tcp_ctlinput6() to closely mimic the IPv4 tcp_ctlinput()
- Now that tcp_ctlinput6() updates t_maxseg, we can allow ip6_output()
to send TCP packets without looking at the tcp host cache for every
single transmit.
- Make the icmp6 code mimic the IPv4 code & avoid returning
PRC_HOSTDEAD because it is so expensive.
Without these changes in place, every TCP6 pmtu discovery or host
unreachable ICMP resulted in a call to in6_pcbnotify() which walks the
tcbinfo table with the write lock held. Because the tcbinfo table is
shared between IPv4 and IPv6, this causes huge scalabilty issues on
servers with lots of (~100K) TCP connections, to the point where even
a small percent of IPv6 traffic had a disproportionate impact on
overall throughput.
Reviewed by: bz, rrs, ae (all earlier versions), lstewart (in Netflix's tree)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D7272
in6_selectsrc() has 2 class of users: socket-based one (raw/udp/pcb/etc) and
socket-less (ND code). The main reason for that change is inability to
specify non-default FIB for callers w/o socket since (internally) inpcb
is used to determine fib.
As as result, add 2 wrappers for in6_selectsrc() (making in6_selectsrc()
static):
1) in6_selectsrc_socket() for the former class. Embed scope_ambiguous check
along with returning hop limit when needed.
2) in6_selectsrc_addr() for the latter case. Add 'fibnum' argument and
pass IPv6 address w/ explicitly specified scope as separate argument.
Reviewed by: ae (previous version)
in6_selectif().
The main task of in6_selectsrc() is to return IPv6 SAS (along with
output interface used for scope checks). No data-path code uses
route argument for caching. The only users are icmp6 (reflect code),
ND6 ns/na generation code. All this fucntions are control-plane, so
there is no reason to try to 'optimize' something by passing cached
route into to ip6_output(). Given that, simplify code by eliminating
in6_selectsrc() 'struct route_in6' argument. Since in6_selectif() is
used only by in6_selectsrc(), eliminate its 'struct route_in6' argument,
too. While here, reshape rte-related code inside in6_selectif() to
free lookup result immediately after saving all the needed fields.
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
ip_dooptions(), icmp6_redirect_input(), in6_lltable_rtcheck(),
in6p_lookup_mcast_ifp() and in6_selecthlim() use new routing api.
Eliminate now-unused ip_rtaddr().
Fix lookup key fib6_lookup_nh_basic() which was lost diring merge.
Make fib6_lookup_nh_basic() and fib6_lookup_nh_extended() always
return IPv6 destination address with embedded scope. Currently
rw_gateway has it scope embedded, do the same for non-gatewayed
destinations.
Sponsored by: Yandex LLC
On receipt of a redirect message, install an interface route for the
redirected destination. On removal of the corresponding Neighbor Cache
entry, remove the interface route.
This requires changes in rtredirect_fib() to cope with an AF_LINK
address for the gateway and with the absence of RTF_GATEWAY.
This fixes the "Redirected On-Link" test cases in the Tahi IPv6 Ready Logo
Phase 2 test suite.
Unrelated to the above, fix a recursion on the radix node head lock
triggered by the Tahi Redirected to Alternate Router test cases.
When I first wrote this patch in October 2012, all Section 2
(Neighbor Discovery) test cases passed on 10-CURRENT, 9-STABLE,
and 8-STABLE. cem@ recently rebased the 10.x patch onto head and reported
that it passes Tahi. (Thanks!)
These other test cases also passed in 2012:
* the RTF_MODIFIED case, with IPv4 and IPv6 (using a
RTF_HOST|RTF_GATEWAY route for the destination)
* the redirected-to-self case, with IPv4 and IPv6
* a valid IPv4 redirect
All testing in 2012 was done with WITNESS and INVARIANTS.
Tested by: EMC / Isilon Storage Division via Conrad Meyer (cem) in 2015,
Mark Kelley <mark_kelley@dell.com> in 2012,
TC Telkamp <terence_telkamp@dell.com> in 2012
PR: 152791
Reviewed by: melifaro (current rev), bz (earlier rev)
Approved by: kib (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D3602
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
It isn't safe to keep unreferenced ifaddrs. Use in6ifa_ifwithaddr() to
determine ifaddr corresponding to destination address. Since currently
we keep addresses with embedded scope zone, in6ifa_ifwithaddr is called
with zero zoneid and marked with XXX.
Also remove route and lle lookups from ip6_input. Use in6ifa_ifwithaddr()
instead.
Sponsored by: Yandex LLC
data in an mbuf, use M_WRITABLE() instead of a direct test of M_EXT;
the latter both unnecessarily exposes mbuf-allocator internals in the
protocol stack and is also insufficient to catch all cases of
non-writability.
(NB: m_pullup() does not actually guarantee that a writable mbuf is
returned, so further refinement of all of these code paths continues to
be required.)
Reviewed by: bz
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D900
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
PF_INET6 in kernel. This fixes various malfunction when the wall time
clock is changed. Bump __FreeBSD_version to 1000041.
- Use clock_gettime(CLOCK_MONOTONIC_FAST) in userland utilities.
MFC after: 1 month
- Do not calculate constant length values at run time,
CTASSERT() their sanity.
- Remove superfluous cleaning of mbuf fields after allocation.
- Replace compat macros with function calls.
Sponsored by: Nginx, Inc.
