where they've disabled all the wireless devices/framework.
This is just a build workaround. If you're actively using wireless,
you must still define AH_SUPPORT_AR5416 as I'm not sure what else
will break!
The real solution is to make the module build depend if AH_SUPPORT_AR5416
is defined, as well as make the 11n code in if_ath_tx.c and if_ath_tx_ht.c
completely optional (maybe depend upon ATH_SUPPORT_11N.)
revision 1.170
date: 2011/10/30 23:04:38; author: mikeb; state: Exp; lines: +6 -7
Allow setting big MTU values on the pfsync interface but not larger
than the syncdev MTU. Prompted by the discussion with and tested
by Maxim Bourmistrov; ok dlg, mpf
Consistently use sc_ifp->if_mtu in the MTU check throughout the
module. This backs out r228813.
This was preventing the ath driver from being loaded at runtime.
It worked fine when compiled statically into the kernel but not when
kldload'ed after the system booted.
The root cause was that PCIR_INTLINE (register 60) was being
overwritten by zeros when register 62 was being written to.
A subsequent read of this register would return 0, and thus
the rest of the PCI glue assumed an IRQ resource had already
been allocated. This caused the device to fail to attach at
runtime as the device itself didn't contain any IRQ resources.
TODO: go back over the ar71xx and ar724x PCI config read/write
code and ensure it's correct.
value used in sys/ofed/include/linux/netdevice.h), so there will be no
buffer overruns in the rest of the inline functions in this file.
Reviewed by: kmacy
MFC after: 1 week
The wrong structure happened to work since the only argument used was
the vnode which is in the same place in both VOP_SETATTR() and the two
extattr VOPs.
MFC after: 3 days
consequence sbuf_len() will return -1 for buffers which had the error
status set prior to sbuf_finish() call. This causes a problem in
pfs_read() which purposely uses a fixed size sbuf to discard bytes which
are not needed to fulfill the read request.
Work around the problem by using the full buffer length when
sbuf_finish() indicates an overflow. An overflowed sbuf with fixed size
is always full.
PR: kern/163076
Approved by: des
MFC after: 2 weeks
than or equal to rcv_adv and fix tcp_twstart() to handle this case by
assuming the last window was zero rather than a negative value.
The code in tcp_input() already safely handled this case. It can happen
due to delayed ACKs along with a remote sender that sends data beyond
the window we previously advertised. If we have room in our socket buffer
for the extra data beyond the advertised window, we will accept it.
However, if the ACK for that segment is delayed, then we will not
effectively fixup rcv_adv to account for that extra data until the
next segment arrives and forces out an ACK. When that next segment
arrives, rcv_nxt will be beyond rcv_adv.
Tested by: pjd
MFC after: 1 week
interface address lists that distinguish read locks from write locks.
To preserve the KPI, the previous operations are mapped to the write
lock macros. The lock is still kept as a mutex for now.
Reviewed by: bz
MFC after: 2 weeks
functions instead of using the IF_ADDR_LOCK directly. The wrapper
functions are the supported interface for device drivers.
Reviewed by: bz, philip
MFC after: 1 week
rings, copy the whole VLAN tag, not just the VLAN ID. This fixes a
problem in which VLAN priority information was dropped when using
offloaded VLAN processing with these drivers.
Discussed with: jfv, rrs
Sponsored by: ADARA Networks, Inc.
MFC after: 3 days
the code is doing, we recognise the legitimacy of its goal, but we're not
quite sure it's going about it the right way. More pondering is clearly
required.
Sponsored by: ADARA Networks, Inc.
Discussed with: bz
MFC after: 3 days
Already introducing this allows us to be forward compatible with C11
compilers. By implementing <tgmath.h> on top of this interface, it
becomes trivial to support both our existing GCC and newer compilers.
opt_ah.h file if KERNBUILDDIR isn't defined.
For now, AH_SUPPORT_AR5416 is required, so I'll just fix any
configuration file in /usr/src which is missing this option.
Pointy hat when things do break to: adrian
