- Removed pf_remove_src_node().
- Introduce pf_unlink_src_node() and pf_unlink_src_node_locked().
These function do not proceed with freeing of a node, just disconnect
it from storage.
- New function pf_free_src_nodes() works on a list of previously
disconnected nodes and frees them.
- Utilize new API in pf_purge_expired_src_nodes().
In collaboration with: Kajetan Staszkiewicz <kajetan.staszkiewicz innogames.de>
Sponsored by: InnoGames GmbH
Sponsored by: Nginx, Inc.
Original log:
Make sure pd2 has a pointer to the icmp header in the payload; fixes
panic seen with some some icmp types in icmp error message payloads.
Obtained from: OpenBSD
Stricter state checking for ICMP and ICMPv6 packets: include the ICMP type
in one port of the state key, using the type to determine which
side should be the id, and which should be the type. Also:
- Handle ICMP6 messages which are typically sent to multicast
addresses but recieve unicast replies, by doing fallthrough lookups
against the correct multicast address. - Clear up some mistaken
assumptions in the PF code:
- Not all ICMP packets have an icmp_id, so simulate
one based on other data if we can, otherwise set it to 0.
- Don't modify the icmp id field in NAT unless it's echo
- Use the full range of possible id's when NATing icmp6 echoy
Difference with OpenBSD version:
- C99ify the new code
- WITHOUT_INET6 safe
Reviewed by: glebius
Obtained from: OpenBSD
in net, to avoid compatibility breakage for no sake.
The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.
Discussed with: bz
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Before this change state creating sequence was:
1) lock wire key hash
2) link state's wire key
3) unlock wire key hash
4) lock stack key hash
5) link state's stack key
6) unlock stack key hash
7) lock ID hash
8) link into ID hash
9) unlock ID hash
What could happen here is that other thread finds the state via key
hash lookup after 6), locks ID hash and does some processing of the
state. When the thread creating state unblocks, it finds the state
it was inserting already non-virgin.
Now we perform proper interlocking between key hash locks and ID hash
lock:
1) lock wire & stack hashes
2) link state's keys
3) lock ID hash
4) unlock wire & stack hashes
5) link into ID hash
6) unlock ID hash
To achieve that, the following hacking was performed in pf_state_key_attach():
- Key hash mutex is marked with MTX_DUPOK.
- To avoid deadlock on 2 key hash mutexes, we lock them in order determined
by their address value.
- pf_state_key_attach() had a magic to reuse a > FIN_WAIT_2 state. It unlinked
the conflicting state synchronously. In theory this could require locking
a third key hash, which we can't do now.
Now we do not remove the state immediately, instead we leave this task to
the purge thread. To avoid conflicts in a short period before state is
purged, we push to the very end of the TAILQ.
- On success, before dropping key hash locks, pf_state_key_attach() locks
ID hash and returns.
Tested by: Ian FREISLICH <ianf clue.co.za>
- Add my copyright to files I've touched a lot this year.
- Add dash in front of all copyright notices according to style(9).
- Move $OpenBSD$ down below copyright notices.
- Remove extra line between cdefs.h and __FBSDID.
id hash. If a state has been disconnected from id hash, its rule pointers
can no longer be dereferenced, and referenced memory can't be modified.
Thus, move rule statistics from pf_free_rule() to pf_unlink_rule() and
update them prior to releasing id hash slot lock.
Reported by: Ian FREISLICH <ianf cloudseed.co.za>
from pfsync:
- Call into pfsync_delete_state() holding the state lock.
- Set the state timeout to PFTM_UNLINKED after state has been moved
to the PFSYNC_S_DEL queue in pfsync.
Reported by: Ian FREISLICH <ianf cloudseed.co.za>
on checksums directly from mbuf flags. This simplifies code.
o Clear CSUM_IP from the mbuf in ip_fragment() if we did checksums in
hardware. Some driver may not announce CSUM_IP in theur if_hwassist,
although try to do checksums if CSUM_IP set on mbuf. Example is em(4).
o While here, consistently use CSUM_IP instead of its alias CSUM_DELAY_IP.
After this change CSUM_DELAY_IP vanishes from the stack.
Submitted by: Sebastian Kuzminsky <seb lineratesystems.com>
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.
After this change a packet processed by the stack isn't
modified at all[2] except for TTL.
After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.
[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.
[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.
Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
host byte order, was sometimes called with net byte order. Since we are
moving towards net byte order throughout the stack, the function was
converted to expect net byte order, and its consumers fixed appropriately:
- ip_output(), ipfilter(4) not changed, since already call
in_delayed_cksum() with header in net byte order.
- divert(4), ng_nat(4), ipfw_nat(4) now don't need to swap byte order
there and back.
- mrouting code and IPv6 ipsec now need to switch byte order there and
back, but I hope, this is temporary solution.
- In ipsec(4) shifted switch to net byte order prior to in_delayed_cksum().
- pf_route() catches up on r241245 changes to ip_output().
pf_purge_expired_states().
Now pf purging daemon stores the current hash table index on stack
in pf_purge_thread(), and supplies it to next iteration of
pf_purge_expired_states(). The latter returns new index back.
The important change is that whenever pf_purge_expired_states() wraps
around the array it returns immediately. This makes our knowledge about
status of states expiry run more consistent. Prior to this change it
could happen that n-th run stopped on i-th entry, and returned (1) as
full run complete, then next (n+1) full run stopped on j-th entry, where
j < i, and that broke the mark-and-sweep algorythm that saves references
rules. A referenced rule was freed, and this later lead to a crash.
we are actually editing table, which means editing rules,
thus we need writer access to 'em.
Fix this by offloading the update of table to the same taskqueue,
we already use for flushing. Since taskqueues major task is now
overloading, and flushing is optional, do mechanical rename
s/flush/overload/ in the code related to the taskqueue.
Since overloading tasks do unsafe referencing of rules, provide
a bandaid in pf_purge_unlinked_rules(). If the latter sees any
queued tasks, then it skips purging for this run.
In table code:
- Assert any lock in pfr_lookup_addr().
- Assert writer lock in pfr_route_kentry().
1) Ruleset parser uses a global variable for anchor stack.
2) When processing a wildcard anchor, matching anchors are marked.
To fix the first one:
o Allocate anchor processing stack on stack. To make this allocation
as small as possible, following measures taken:
- Maximum stack size reduced from 64 to 32.
- The struct pf_anchor_stackframe trimmed by one pointer - parent.
We can always obtain the parent via the rule pointer.
- When pf_test_rule() calls pf_get_translation(), the former lends
its stack to the latter, to avoid recursive allocation 32 entries.
The second one appeared more tricky. The code, that marks anchors was
added in OpenBSD rev. 1.516 of pf.c. According to commit log, the idea
is to enable the "quick" keyword on an anchor rule. The feature isn't
documented anywhere. The most obscure part of the 1.516 was that code
examines the "match" mark on a just processed child, which couldn't be
put here by current frame. Since this wasn't documented even in the
commit message and functionality of this is not clear to me, I decided
to drop this examination for now. The rest of 1.516 is redone in a
thread safe manner - the mark isn't put on the anchor itself, but on
current stack frame. To avoid growing stack frame, we utilize LSB
from the rule pointer, relying on kernel malloc(9) returning pointer
aligned addresses.
Discussed with: dhartmei
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
