- Add FDT probe code.
- Do i2c transfers with exclusive bus ownership.
- Use config_intrhook_oneshot() to defer chip setup because some i2c
busses can't do transfers without interrupts.
- Add a detach() routine.
- Add to module build.
This driver supports only basic timekeeping functionality. It completely
replaces the ds133x driver. It can also replace the ds1374 driver, but that
will take a few other changes in MIPS code and config, and will be committed
separately. It does NOT replace the existing ds1307 driver, which provides
access to some of the extended features on the 1307 chip, such as controlling
the square wave output signal. If both ds1307 and ds13rtc drivers are
present, the ds1307 driver will outbid and win control of the device.
This driver can be configured with FDT data, or by using hints on non-FDT
systems. In addition to the standard hints for i2c devices, it requires
a "chiptype" string of the form "dallas,ds13xx" where 'xx' is the chip id
(i.e., the same format as FDT compat strings).
and sc_irq_length to the softc to handle the base number of IRQs available,
make gicv3_get_nirqs return the number of available interrupt IDs, and
limit which CPUs we send interrupts to based on the numa domain.
The last point is only strictly needed on a dual socket ThunderX where we
are unable to send MSI/MSI-X interrupts between sockets.
Sponsored by: DARPA, AFRL
it automatically after it runs.
The config_intrhook mechanism allows a driver to stall the boot process
until device(s) required for booting are available, by not allowing system
inits to proceed until all intrhook functions have been unregistered.
Virtually all existing code simply unregisters from within the hook function
when it gets called.
This new function makes that common usage more convenient. Instead of
allocating and filling in a struct, passing it to a function that might (in
theory) fail, and checking the return code, now a driver can simply call
this cannot-fail routine, passing just the intrhook function and its arg.
Differential Revision: https://reviews.freebsd.org/D11963
the g_journal level needs to check whether it is holding a newer
copy of the block than that which exists on the disk. If so, it
needs to return its copy. If not, it should pass the request down
to the disk to fulfill. It currently considers six queues:
0) delayed queue,
1) unsent (current queue),
2) in-flight to the journal (flush queue),
3) active journal (active queue),
4) inactive journal (inactive queue), and
5) inflight to the disk (copy queue).
Checking on two of these queues is unnecessary:
0) The delayed requests should not be used for reads because they
have not yet been entered into the journal, so their value should
reflect the disk contents, not the future contents that are not
yet committed.
2) Because all the bio's in the flush queue are also found on the
active queue, there is no need to inspect the flush queue for
reads since they will be found when searching the active queue.
Submitted by: Dr. Andreas Longwitz <longwitz@incore.de>
Discussed with: kib
MFC after: 1 week
another parameter that identifies a starting point in the memory address
block. Radix is a power of two, blk is a multiple of radix, and the
starting point is in the range [blk, blk+radix), so that blk can always be
computed from the other two. This change drops the blk parameter from the
meta functions and computes it instead. (On amd64, for example, this
change reduces subr_blist.o's text size by 7%.)
It also makes the radix parameters unsigned to address concerns that the
calculation of '-radix' might overflow without the -fwrapv option. (See
https://reviews.freebsd.org/D11819.)
Submitted by: Doug Moore <dougm@rice.edu>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11964
On i386 with CPUID but without SSE2, set lfence_works to LMB_NONE
instead of looping.
Reported and tested by: Andre Albsmeier <andre@fbsd.e4m.org>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
time. Remove it from here. As far as I could tell, nothing in ports
use it (either __ARM_ARCH or __ARM_ARCH_6__ is used in all the
apatches). We do have a define for _ARM_ARCH_6, but it's mostly unused
(and will remain, since it isn't in this file).
The reachover Kyuafiles were never added, and thus the tests were installed
as standalone tests, and not integrated into the full suite.
MFC after: 1 week
MFC with: r305626, 305629, r307863, r322447, r322448, r322449
of freefall.freebsd.org to unbreak the DNS tests
The address allocations for freefall.freebsd.org have changed in the past 4 years.
Use a more stable set of hardcoded addresses for now to make the tests succeed
reliably.
The hostname should be resolved dynamically instead of hardcoding the addresses in
the future. This is just a bandaid.
MFC after: 1 week
Some of the testcases try to manipulate sysctls that require root privileges,
e.g., "kern.sync_on_panic". Make root-privileges a hard requirement so the
tests don't raise false positives due to privilege issues when calling
sysctlbyname(3) on writable sysctls.
MFC after: 1 week
- Flushing stdout prevents the buffer from being printed twice, fixing
issues with stdout printing out the testplan, etc, twice.
- Don't print out raw source/line numbers; hide them behind comments.
MFC after: 1 week
to being called through the newbus DEVICE_SHUTDOWN() path. This ensures that
the NVME controller gets shut down before the device and bus disappear
and prevents data corruption on shutdown on at least Samsung EVO 960 SSDs.
PR: kern/211852
Reviewed by: imp
MFC after: 2 weeks
Note: Mouse's bthidd.conf record should contain vendor and device IDs
to make proper device detection. If it does not contain IDs,
regenerate record with "Query" command of recent bthidcontrol(8).
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Extend bthidd.conf format to store vendor and product IDs of remote
Bluetooth HID devices to make possible implementation of device
specific quirks inside bthidd(8).
Add support for querying of this information from device's SDP records
with bthidcontrol(8) "Query" command.
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Previously, debug exceptions were only enabled on the boot CPU if
DDB was enabled in the dbg_monitor_init() function. APs also called
this function, but since mp_machdep.c doesn't include opt_ddb.h, the
APs ended up calling an empty stub defined in <machine/debug_monitor.h>
instead of the real function. Also, if DDB was not enabled in the kernel,
the boot CPU would not enable debug exceptions.
Fix this by adding a new dbg_init() function that always clears the OS
lock to enable debug exceptions which the boot CPU and the APs call.
This function also calls dbg_monitor_init() to enable hardware breakpoints
from DDB on all CPUs if DDB is enabled. Eventually base support for
hardware breakpoints/watchpoints will need to move out of the DDB-only
debug_monitor.c for use by userland debuggers.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D12001
Only fetch the VFP state from the CPU if the thread whose registers are
being requested is the current thread. If a stopped thread's registers
are being fetched by a debugger, the saved state in the PCB is already
valid.
Reviewed by: andrew
MFC after: 1 week
This excess / was introduced in r280129, and fixed in r295230, but got
re-introduced while merging another branch in r298107.
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D11995
S_IRUSR is defined in sys/stat.h
PR: 209229
Submitted by: <mt AT markoturk DOT info>
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D12007
generic driver with minimal feature support for a large number of chips.
More featureful per-chip drivers might exist (especially out-of-tree) and
those should win the bidding even if they use BUS_PROBE_DEFAULT.
Consolidate all the regular expressions to convert from MACHINE_ARCH
to MACHINE_CPUARCH into a variable and use that variable in preference
to the almost identical copies in the tree (which should have been
identical).
Differential Revision: https://reviews.freebsd.org/D11986
abort_handler_s() currently simply calls abort(), though the standard
specifies more: "Writes an implementation-defined message to stderr
which must include the string pointed to by msg and calls abort()."
memset_s() is missing error condition "n > smax", and does not invoke
the constraint handler after filling the buffer: "following errors are
detected at runtime and call the currently installed constraint
handler function after storing ch in every location of the destination
range [dest, dest+destsz) if dest and destsz are themselves valid",
one of the errors is "n > smax" itself.
Submitted by: Yuri Pankov <yuripv@gmx.com>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11991
the current state to determine whether to generate a link-state change
notification. This fixes a bug introduced in r321063 that caused the
driver to sometimes skip these notifications.
Reported by: Jason Eggleston @ LLNW
MFC after: 3 days
Sponsored by: Chelsio Communications
LDBL_MAX is broken on i386:
https://lists.freebsd.org/pipermail/freebsd-numerics/2012-September/000288.html
Gcc has produced +Infinity for LDBL_MAX on i386 and amd64 with -m32
for some time, and newer versions of gcc are now warning that the
"floating constant exceeds range of 'long double'". Avoid this by
referring to half the value of LDBL_MAX instead.
Reviewed by: bde
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Added in r238189, ARM_MANY_BOARD adds support for multiple ARM boards in
a single kernel. Include it for LINT builds to avoid duplicate symbol
errors when linking with lld.
Sponsored by: The FreeBSD Foundation
The encrypted kernel dump code writes data in blocks of this size. A buffer
size of 4096 allows encrypted dumps to work with 4Kn drives.
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11870
svnversion metadata to the runtime and kernel packages.
Instead of traversing src/sys, as is done by newvers.sh for uname(1),
a full tree walk is done to prevent userland and/or modifications
from not being reflected in a modified tree (M).
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
removes the only reference to atrtc_set() from outside of atrtc.c, so make
it static.
The xen timer driver registers as a realtime clock with 1us resolution. In
the past that resulted in only the xen timer's clock_settime() getting
called, so it would call atrtc_set() to set the hardware clock as well. As
of r32090, the clock_settime() method of all registered realtime clocks gets
called, so the xen driver no longer needs to chain-call the lower-resolution
driver.
Thanks to royger@ for talking me through the xen stuff, and for testing.
o Density code 0x5 is also known as QIC-11, and should have a footnote
reference.
o Add notes on QIC tape drives from the bug report. These may help anyone
trying to use a QIC drive.
o Take out a "more more" instance found by igor.
o Bump the man page date.
The PR is 14 years old, so it's past time to retire it.
PR: doc/53596
Submitted by: tedm@toybox.placo.com
Reviewed by: bcr
Sponsored by: Spectra Logic
