1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel
thread current user thread is running on. Add tm_dflags into
kse_thr_mailbox, the flags is written by debugger, it tells
UTS and kernel what should be done when the process is being
debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER.
TMDF_SSTEP is used to tell kernel to turn on single stepping,
or turn off if it is not set.
TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall
whenever possible, to UTS, it means do not run the user thread
until debugger clears it, this behaviour is necessary because
gdb wants to resume only one thread when the thread's pc is
at a breakpoint, and thread needs to go forward, in order to
avoid other threads sneak pass the breakpoints, it needs to remove
breakpoint, only wants one thread to go. Also, add km_lwp to
kse_mailbox, the lwp id is copied to kse_thr_mailbox at context
switch time when process is not being debugged, so when process
is attached, debugger can map kernel thread to user thread.
2. Add p_xthread to proc strcuture and td_xsig to thread structure.
p_xthread is used by a thread when it wants to report event
to debugger, every thread can set the pointer, especially, when
it is used in ptracestop, it is the last thread reporting event
will win the race. Every thread has a td_xsig to exchange signal
with debugger, thread uses TDF_XSIG flag to indicate it is reporting
signal to debugger, if the flag is not cleared, thread will keep
retrying until it is cleared by debugger, p_xthread may be
used by debugger to indicate CURRENT thread. The p_xstat is still
in proc structure to keep wait() to work, in future, we may
just use td_xsig.
3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend
a thread. When process stops, debugger can set the flag for
thread, thread will check the flag in thread_suspend_check,
enters a loop, unless it is cleared by debugger, process is
detached or process is existing. The flag is also checked in
ptracestop, so debugger can temporarily suspend a thread even
if the thread wants to exchange signal.
4. Current, in ptrace, we always resume all threads, but if a thread
has already a TDF_DBSUSPEND flag set by debugger, it won't run.
Encouraged by: marcel, julian, deischen
tracing process to obtain information about the LWP that caused the
traced process to stop. Debuggers can use this information to select
the thread currently running on the LWP as the current thread.
The request has been made compatible with NetBSD for as much as
possible. This implementation differs from NetBSD in the following
ways:
1. The data argument is allowed to be smaller than the size of the
ptrace_lwpinfo structure known to the kernel, but not 0. This
is opposite to what NetBSD allows. The reason for this is that
we can extend the structure without affecting older binaries.
2. On NetBSD the tracing process is to set the pl_lwpid field to
the Id of the LWP it wants information of. We don't do that.
Our ptrace interface allows passing the LWP Id instead of the
PID. The tracing process is to set the PID to the LWP Id it
wants information of.
3. When the PID is actually the PID of the tracing process, this
request returns the information about the LWP that caused the
process to stop. This was the whole purpose of the request in
the first place.
When the traced process has exited, this request will return the
LWP Id 0, indicating that the process state is not the result of
an event specific to a LWP.
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling choosethread() to pick
a thread to choose to.
- Make sched_switch() aware of idle threads and know to do
TD_SET_CAN_RUN() instead of sticking them on the run queue rather than
requiring all callers of mi_switch() to know to do this if they can be
called from an idlethread.
- Move constants for arguments to mi_switch() and thread_single() out of
the middle of the function prototypes and up above into their own
section.
a LOR against sleepq. Fix the comment, and fix ptracestop() to pick up
sched_lock after stop() rather than before.
Reported by: Scott Sipe <cscotts@mindspring.com>
Reviewed by: rwatson, jhb
- Push Giant down a bit in coredump() and call coredump() with the proc
lock already held rather than unlocking it only to turn around and
relock it.
Requested by: peter
sleep queue interface:
- Sleep queues attempt to merge some of the benefits of both sleep queues
and condition variables. Having sleep qeueus in a hash table avoids
having to allocate a queue head for each wait channel. Thus, struct cv
has shrunk down to just a single char * pointer now. However, the
hash table does not hold threads directly, but queue heads. This means
that once you have located a queue in the hash bucket, you no longer have
to walk the rest of the hash chain looking for threads. Instead, you have
a list of all the threads sleeping on that wait channel.
- Outside of the sleepq code and the sleep/cv code the kernel no longer
differentiates between cv's and sleep/wakeup. For example, calls to
abortsleep() and cv_abort() are replaced with a call to sleepq_abort().
Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and
cv_waitq_remove() have been replaced with calls to sleepq_remove().
- The sched_sleep() function no longer accepts a priority argument as
sleep's no longer inherently bump the priority. Instead, this is soley
a propery of msleep() which explicitly calls sched_prio() before
blocking.
- The TDF_ONSLEEPQ flag has been dropped as it was never used. The
associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been
dropped and replaced with a single explicit clearing of td_wchan.
TD_SET_ONSLEEPQ() would really have only made sense if it had taken
the wait channel and message as arguments anyway. Now that that only
happens in one place, a macro would be overkill.
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
a maximum dump size of 0, return a size-related error, rather
than returning success. Otherwise, waitpid() will incorrectly
return a status indicating that a core dump was created. Note
that the specific error doesn't actually matter, since it's lost.
MFC after: 2 weeks
PR: 60367
Submitted by: Valentin Nechayev <netch@netch.kiev.ua>
holding the mutex. Because the sigacts pointer can't change while
the process is "live" (proc locking (x)), we know our pointer is still
valid.
In communication with: truckman
Reviewed by: jhb
is useless for threaded programs, multiple threads can not share same
stack.
The alternative signal stack is private for thread, no lock is needed,
the orignal P_ALTSTACK is now moved into td_pflags and renamed to
TDP_ALTSTACK.
For single thread or Linux clone() based threaded program, there is no
semantic changed, because those programs only have one kernel thread
in every process.
Reviewed by: deischen, dfr
if we do acquire an advisory lock, great! We'll release it later.
However, if we fail to acquire a lock, we perform the coredump
anyway. This problem became particularly visible with NFS after
the introduction of rpc.lockd: if the lock manager isn't running,
then locking calls will fail, aborting the core dump (resulting in
a zero-byte dump file).
Reported by: Yogeshwar Shenoy <ynshenoy@alumni.cs.ucsb.edu>
psignal()/tdsignal(). The test was historically in psignal(). It was
changed into a KASSERT, and then later moved to tdsignal() when the
latter was introduced.
Reviewed by: iedowse, jhb
When a signal is being delivered to process, first find a sigwait
thread to deliver, POSIX's argument is speed of delivering signal
to sigwait thread is faster than other ways. A signal in its wait
set will cause sigwait to return the signal number, a signal not
in its wait set but in not blocked by the thread also causes sigwait
to return, but sigwait returns EINTR, sigwait is oneshot operation,
only one signal can be delivered to its wait set, when a signal is
delivered to the sigwait thread, the thread's sigwait state is canceled.
be delivered to that thread, regardless of whether it
has it masked or not.
Previously, if the targeted thread had the signal masked,
it would be put on the processes' siglist. If
another thread has the signal umasked or unmasks it before
the target, then the thread it was intended for would never
receive it.
This patch attempts to solve the problem by requiring callers
of tdsignal() to say whether the signal is for the thread or
for the process. If it is for the process, then normal processing
occurs and any thread that has it unmasked can receive it.
But if it is destined for a specific thread, it is put on
that thread's pending list regardless of whether it is currently
masked or not.
The new behaviour still needs more work, though. If the signal
is reposted for some reason it is always posted back to the
thread that handled it because the information regarding the
target of the signal has been lost by then.
Reviewed by: jdp, jeff, bde (style)
or unblock a thread in kernel, and allow UTS to specify whether syscall
should be restarted.
o Add ability for UTS to monitor signal comes in and removed from process,
the flag PS_SIGEVENT is used to indicate the events.
o Add a KMF_WAITSIGEVENT for KSE mailbox flag, UTS call kse_release with
this flag set to wait for above signal event.
o For SA based thread, kernel masks all signal in its signal mask, let
UTS to use kse_thr_interrupt interrupt a thread, and install a signal
frame in userland for the thread.
o Add a tm_syncsig in thread mailbox, when a hardware trap occurs,
it is used to deliver synchronous signal to userland, and upcall
is schedule, so UTS can process the synchronous signal for the thread.
Reviewed by: julian (mentor)
POSIX says siginfo pointer parameter can be NULL and if the
function success, it should return signal number but not zero.
The waitset it past should be negatived before it can be
used as thread signal mask.
threads in the process have already masked the signal, so job control
is delayed. But later a thread unmasking the STOP signal should enable
job control, so in issignal(), scanning all threads in process to see
if we can direct suspend some of them, not just suspend current thread.
schedules an upcall. Signal delivering to a bound thread is same as
non-threaded process. This is intended to be used by libpthread to
implement PTHREAD_SCOPE_SYSTEM thread.
2. Simplify kse_release() a bit, remove sleep loop.
curthread. Unlike td_flags, this field does not need any locking.
- Replace the td_inktr and td_inktrace variables with equivalent private
thread flags.
- Move TDF_OLDMASK over to the private flags field so it no longer requires
sched_lock.
PT_DETACH ptrace(2) requests from functioning as advertised in the
manual page. As described in kern/35175, the PT_DETACH request will,
under certain circumstances, pass an unwanted signal on to the traced
process upan detaching from it. The PT_CONTINUE request will
sometimes fail if you make it pass a signal that has "properties" that
differ from the properties of the signal that origionally caused the
traced process to be stopped. Since PT_KILL is nothing than
PT_CONTINUE with SIGKILL, it is broken too. In the PT_KILL case, this
leads to an unkillable process.
PR: 44011
Submitted by: Mark Kettenis <kettenis@chello.nl>
Approved by: re(jhb)
- Move struct sigacts out of the u-area and malloc() it using the
M_SUBPROC malloc bucket.
- Add a small sigacts_*() API for managing sigacts structures: sigacts_alloc(),
sigacts_free(), sigacts_copy(), sigacts_share(), and sigacts_shared().
- Remove the p_sigignore, p_sigacts, and p_sigcatch macros.
- Add a mutex to struct sigacts that protects all the members of the struct.
- Add sigacts locking.
- Remove Giant from nosys(), kill(), killpg(), and kern_sigaction() now
that sigacts is locked.
- Several in-kernel functions such as psignal(), tdsignal(), trapsignal(),
and thread_stopped() are now MP safe.
Reviewed by: arch@
Approved by: re (rwatson)
do all the various sigstack dances, unlock the proc lock, and finally do
the copyout. This more closely resembles the behavior of
kern_sigaltstack() and closes a small race.
- Remove Giant from osigstack as it is no longer needed.
lock assertion to it.
- SIGPENDING() no longer needs sched_lock, so only grab sched_lock to set
the TDF_NEEDSIGCHK and TDF_ASTPENDING flags in signotify().
- Add a proc lock assertion to tdsigwakeup().
- Since we always set TDF_OLDMASK while holding the proc lock, the proc
lock is sufficient protection to check its state in postsig() and we only
need sched_lock when clearing the actual flag.
kern_sigtimedwait() which is capable of supporting all of their semantics.
- These should be POSIX compliant but more careful review is needed before
we announce this.
a follow on commit to kern_sig.c
- signotify() now operates on a thread since unmasked pending signals are
stored in the thread.
- PS_NEEDSIGCHK moves to TDF_NEEDSIGCHK.
- Change all consumers to pass in a thread.
Right now this does not cause any functional changes but it will be important
later when signals can be delivered to specific threads.
add a signal to a mailbox's pending set.
- Add a new function, thread_signal_upcall(), this causes the current thread
to upcall so that we can deliver pending signals.
Reviewed by: mini
I was in two minds as to where to put them in the first case..
I should have listenned to the other mind.
Submitted by: parts by davidxu@
Reviewed by: jeff@ mini@
freebsd4_sigaction() and osigaction() instead of around the whole
body of those functions. They now no longer hold Giant around calls
to copyin() and copyout(), and it is slightly more obvious what
Giant is protecting.
I'm not convinced there is anything major wrong with the patch but
them's the rules..
I am using my "David's mentor" hat to revert this as he's
offline for a while.
data structure called kse_upcall to manage UPCALL. All KSE binding
and loaning code are gone.
A thread owns an upcall can collect all completed syscall contexts in
its ksegrp, turn itself into UPCALL mode, and takes those contexts back
to userland. Any thread without upcall structure has to export their
contexts and exit at user boundary.
Any thread running in user mode owns an upcall structure, when it enters
kernel, if the kse mailbox's current thread pointer is not NULL, then
when the thread is blocked in kernel, a new UPCALL thread is created and
the upcall structure is transfered to the new UPCALL thread. if the kse
mailbox's current thread pointer is NULL, then when a thread is blocked
in kernel, no UPCALL thread will be created.
Each upcall always has an owner thread. Userland can remove an upcall by
calling kse_exit, when all upcalls in ksegrp are removed, the group is
atomatically shutdown. An upcall owner thread also exits when process is
in exiting state. when an owner thread exits, the upcall it owns is also
removed.
KSE is a pure scheduler entity. it represents a virtual cpu. when a thread
is running, it always has a KSE associated with it. scheduler is free to
assign a KSE to thread according thread priority, if thread priority is changed,
KSE can be moved from one thread to another.
When a ksegrp is created, there is always N KSEs created in the group. the
N is the number of physical cpu in the current system. This makes it is
possible that even an userland UTS is single CPU safe, threads in kernel still
can execute on different cpu in parallel. Userland calls kse_create to add more
upcall structures into ksegrp to increase concurrent in userland itself, kernel
is not restricted by number of upcalls userland provides.
The code hasn't been tested under SMP by author due to lack of hardware.
Reviewed by: julian
(show thread {address})
Remove the IDLE kse state and replace it with a change in
the way threads sahre KSEs. Every KSE now has a thread, which is
considered its "owner" however a KSE may also be lent to other
threads in the same group to allow completion of in-kernel work.
n this case the owner remains the same and the KSE will revert to the
owner when the other work has been completed.
All creations of upcalls etc. is now done from
kse_reassign() which in turn is called from mi_switch or
thread_exit(). This means that special code can be removed from
msleep() and cv_wait().
kse_release() does not leave a KSE with no thread any more but
converts the existing thread into teh KSE's owner, and sets it up
for doing an upcall. It is just inhibitted from being scheduled until
there is some reason to do an upcall.
Remove all trace of the kse_idle queue since it is no-longer needed.
"Idle" KSEs are now on the loanable queue.
handling clean and functional as 5.x evolves. This allows some of the
nasty bandaids in the 5.x codepaths to be unwound.
Encapsulate 4.x signal handling under COMPAT_FREEBSD4 (there is an
anti-foot-shooting measure in place, 5.x folks need this for a while) and
finish encapsulating the older stuff under COMPAT_43. Since the ancient
stuff is required on alpha (longjmp(3) passes a 'struct osigcontext *'
to the current sigreturn(2), instead of the 'ucontext_t *' that sigreturn
is supposed to take), add a compile time check to prevent foot shooting
there too. Add uniform COMPAT_43 stubs for ia64/sparc64/powerpc.
Tested on: i386, alpha, ia64. Compiled on sparc64 (a few days ago).
Approved by: re
I've added a structure, kernel-private, to represent a pending or in-delivery
signal, called `ksiginfo'. It is roughly analogous to the basic information
that is exported by the POSIX interface 'siginfo_t', but more basic. I've
added functions to allocate these structures, and further to wrap all signal
operations using them.
Once the operations are wrapped, I've added a TailQ (see queue(3)) of these
structures to 'struct proc', and all pending signals are in that TailQ. When
a signal is being delivered, it is dequeued from the list. Once I finish
the spreading of ksiginfo throughout the tree, the dequeued structure will be
delivered to the process in question, whereas currently and normally, the
signal number is what is used.
gets signals operating based on a TailQ, and is good enough to run X11,
GNOME, and do job control. There are some intricate parts which could be
more refined to match the sigset_t versions, but those require further
evaluation of directions in which our signal system can expand and contract
to fit our needs.
After this has been in the tree for a while, I will make in kernel API
changes, most notably to trapsignal(9) and sendsig(9), to use ksiginfo
more robustly, such that we can actually pass information with our
(queued) signals to the userland. That will also result in using a
struct ksiginfo pointer, rather than a signal number, in a lot of
kern_sig.c, to refer to an individual pending signal queue member, but
right now there is no defined behaviour for such.
CODAFS is unfinished in this regard because the logic is unclear in
some places.
Sponsored by: New Gold Technology
Reviewed by: bde, tjr, jake [an older version, logic similar]
- Use ucontext_t's to store KSE thread state.
- Synthesize state for the UTS upon each upcall, rather than
saving and copying a trapframe.
- Deliver signals to KSE-aware processes via upcall.
- Rename kse mailbox structure fields to be more BSD-like.
- Store the UTS's stack in struct proc in a stack_t.
Reviewed by: bde, deischen, julian
Approved by: -arch
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
s/SNGL/SINGLE/
s/SNGLE/SINGLE/
Fix abbreviation for P_STOPPED_* etc flags, in original code they were
inconsistent and difficult to distinguish between them.
Approved by: julian (mentor)
PCATCH means 'if we get a signal, interrupt me!" and tsleep returns
either EINTR or ERESTART depending on the circumstances. ERESTART is
"special" because it causes the system call to fail, but right as it
returns back to userland it tells the trap handler to move %eip back a
bit so that userland will immediately re-run the syscall.
This is a syscall restart. It only works for things like read() etc where
nothing has changed yet. Note that *userland* is tricked into restarting
the syscall by the kernel. The kernel doesn't actually do the restart. It
is deadly for things like select, poll, nanosleep etc where it might cause
the elapsed time to be reset and start again from scratch. So those
syscalls do this to prevent userland rerunning the syscall:
if (error == ERESTART) error = EINTR;
Fake "signals" like SIGTSTP from ^Z etc do not normally invoke userland
signal handlers. But, in -current, the PCATCH *is* being triggered and
tsleep is returning ERESTART, and the syscall is aborted even though no
userland signal handler was run.
That is the fault here. We're triggering the PCATCH in cases that we
shouldn't. ie: it is being triggered on *any* signal processing, rather
than the case where the signal is posted to userland.
--- Peter
The work of psignal() is a patchwork of special case required by the process
debugging and job-control facilities...
--- Kirk McKusick
"The design and impelementation of the 4.4BSD Operating system"
Page 105
in STABLE source, when psignal is posting a STOP signal to sleeping
process and the signal action of the process is SIG_DFL, system will
directly change the process state from SSLEEP to SSTOP, and when
SIGCONT is posted to the stopped process, if it finds that the process
is still on sleep queue, the process state will be restored to SSLEEP,
and won't wakeup the process.
this commit mimics the behaviour in STABLE source tree.
Reviewed by: Jon Mini, Tim Robbins, Peter Wemm
Approved by: julian@freebsd.org (mentor)
a kernel-internal kern_*() version and a wrapper that is called via
the syscall vector table. For paths and structure pointers, the
internal version either takes a uio_seg parameter or requires the
caller to copyin() the data to kernel memory as appropiate. This
will permit emulation layers to use these syscalls without having
to copy out translated arguments to the stack gap.
Discussed on: -arch
Review/suggestions: bde, jhb, peter, marcel
We need to rethink a bit of this and it doesn't matter if
we break the KSE test program for now as long
as non-KSE programs act as expected.
Submitted by: David Xu <bsddiy@yahoo.com>
(this guy's just asking to get hit with a commit bit..)
I'm not sure what happenned to the original setting of the P_CONTINUED
flag. it appears to have been lost in the paper shuffling...
Submitted by: David Xu <bsddiy@yahoo.com>
Make idle process state more consistant.
Add an assert on thread state.
Clean up idleproc/mi_switch() interaction.
Use a local instead of referencing curthread 7 times in a row
(I've been told curthread can be expensive on some architectures)
Remove some commented out code.
Add a little commented out code (completion coming soon)
Reviewed by: jhb@freebsd.org
The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)
Reviewed by: Almost everyone who counts
(at various times, peter, jhb, matt, alfred, mini, bernd,
and a cast of thousands)
NOTE: this is still Beta code, and contains lots of debugging stuff.
expect slight instability in signals..
(P_CONTINUED) is set when a stopped process receives a SIGCONT and
cleared after it has notified a parent process that has requested
notification via waitpid(2) with WCONTINUED specified in its options
operand. The status value can be checked with the new WIFCONTINUED()
macro.
Reviewed by: jake
pointer instead of a proc pointer and require the process pointed to
by the second argument to be locked. We now use the thread ucred reference
for the credential checks in p_can*() as a result. p_canfoo() should now
no longer need Giant.
inter-process signalling ceased to preserve and return that value,
instead always returning EPERM. This meant that it was possible
to "probe" the pid space for processes that were not otherwise
visible. This change reverts that reversion.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
.) don't use MAXPATHLEN + 1, fix logic to compensate.
.) style(9) function parameters.
.) fix line wrapping.
.) remove duplicated error and string handling code.
.) don't NUL terminate already NUL terminated string.
.) all string length variables changed from int to size_t.
.) constify variables.
.) catch when corename would be truncated.
.) cast pid_t and uid_t args for format string.
.) add parens around return arguments.
Help and suggestions from: bde
killed by SIGSYS for unimlemented syscalls is bad enough.
Obtained from: Lite2 branch
The Lite2 branch has some other interesting unmerged (?) bits in this
file. They are well hidden among cosmetic regressions.
locks the process.
- Defer other blocking operations such as vrele()'s until after we
release locks.
- execsigs() now requires the proc lock to be held when it is called
rather than locking the process internally.
Turn the sigio sx into a mutex.
Sigio lock is really only needed to protect interrupts from dereferencing
the sigio pointer in an object when the sigio itself is being destroyed.
In order to do this in the most unintrusive manner change pgsigio's
sigio * argument into a **, that way we can lock internally to the
function.
SIGCHLD handler is SIG_IGN. This is a reimplementation of the
problematic revision 1.131 of kern_exit.c. To avoid accessing process
UPAGES, we set a new procsig flag when the SIGCHLD handler is SIG_IGN
and use that instead.
we can use td_ucred.
- In killpg1(), the proc lock is sufficient to check if p_stat is SZOMB
or not. We don't need sched_lock.
- Close some races in psignal(). In psignal() there is a big switch
statement based on p_stat. All the different cases are assuming that
the process (or thread) isn't going to change state out from under it.
To ensure this is true, just lock sched_lock for the entire switch. We
practically held it the entire time already anyways. This also
simplifies the locking somewhat and actually results in fewer lock
operations.
- Allow signotify() to be called with the sched_lock held since psignal()
now does that.
- Use td_ucred in a couple of places.
they aren't in the usual path of execution for syscalls and traps.
The main complication for this is that we have to set flags to control
ast() everywhere that changes the signal mask.
Avoid locking in userret() in most of the remaining cases.
Submitted by: luoqi (first part only, long ago, reorganized by me)
Reminded by: dillon
inline function sigsetmasked() and a new macro SIGPENDING(). CURSIG()
will soon be moved out of the normal path of execution for syscalls and
traps. Then its efficiency will be less important but the new interfaces
will be useful for checking for unmasked pending signals in more places.
Submitted by: luoqi (long ago, in a slightly different form)
Assert that sched_lock is not held in CURSIG().
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
New locks are:
- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session members.
Please refer to sys/proc.h for the coverage of these locks.
Changes on the pgrp/session interface:
- pgfind() needs the pgrpsess_lock held.
- The caller of enterpgrp() is responsible to allocate a new pgrp and
session.
- Call enterthispgrp() in order to enter an existing pgrp.
- pgsignal() requires a pgrp lock held.
Reviewed by: jhb, alfred
Tested on: cvsup.jp.FreeBSD.org
(which is a quad-CPU machine running -current)
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
macro. As a result, mandatory signal delivery policies will be
applied consistently across the kernel.
- Note that this subtly changes the protection semantics, and we should
watch out for any resulting breakage. Previously, delivery of SIGIO
in this circumstance was limited to situations where the subject was
privileged, or where one of the subject's (ruid, euid) matched one
of the object's (ruid, euid). In the new scenario, subject (ruid, euid)
are matched against the object's (ruid, svuid), and the object uid's
must be a subset of the subject uid's. Likewise, jail now affects
delivery, and special handling for P_SUGID of the object is present.
This change can always be reversed or tweaked if it proves to disrupt
application behavior substantially.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
mutex releases to not require flags for the cases when preemption is
not allowed:
The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe. Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer. This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs. Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called. (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)
I've tested the changes to the interrupt code on i386 and alpha. I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine. PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken. Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.
Reviewed by: peter
Tested on: i386, alpha
by one - see _SIG_IDX(). Revert part of my mis-correction in kern_sig.c
(but signal 0 still has to be allowed) and fix _SIG_VALID() (it was
rejecting ignal 128).
argument of 0. You cannot return EINVAL for signal 0. This broke
(in 5 minutes of testing) at least ssh-agent and screen.
However, there was a bug in the original code. Signal 128 is not
valid.
Pointy-hat to: des, jhb
confused. Since sa_sigaction and sa_handler alias each other in a
union, the bug was completely harmless. This had been fixed as part
of the SIGCHLD changes in revision 1.125, but it was reverted when
they were backed out in revision 1.126.
transcription during the (pcred,ucred) merge; this was not used for
the kill() system call, so does not affect direct explicit process
signalling.
Pointed out by: fenner
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
me (addition of vn_rdwr_inchunks). The problem Yahoo is solving is that
if you have large process images core dumping, or you have a large number of
forked processes all core dumping at the same time, the original coredump code
would leave the vnode locked throughout. This can cause the directory vnode
to get locked up, which can cause the parent directory vnode to get locked
up, and so on all the way to the root node, locking the entire machine up
for extremely long periods of time.
This patch solves the problem in two ways. First it uses an advisory
non-blocking lock to abort multiple processes trying to core to the same
file. Second (my contribution) it chunks up the writes and uses bwillwrite()
to avoid holding the vnode locked while blocking in the buffer cache.
Submitted by: ps
Reviewed by: dillon
MFC after: 2 weeks
Instead introduce the [M] prefix to existing keywords. e.g.
MSTD is the MP SAFE version of STD. This is prepatory for a
massive Giant lock pushdown. The old MPSAFE keyword made
syscalls.master too messy.
Begin comments MP-Safe procedures with the comment:
/*
* MPSAFE
*/
This comments means that the procedure may be called without
Giant held (The procedure itself may still need to obtain
Giant temporarily to do its thing).
sv_prepsyscall() is now MP SAFE and assumed to be MP SAFE
sv_transtrap() is now MP SAFE and assumed to be MP SAFE
ktrsyscall() and ktrsysret() are now MP SAFE (Giant Pushdown)
trapsignal() is now MP SAFE (Giant Pushdown)
Places which used to do the if (mtx_owned(&Giant)) mtx_unlock(&Giant)
test in syscall[2]() in */*/trap.c now do not. Instead they
explicitly unlock Giant if they previously obtained it, and then
assert that it is no longer held to catch broken system calls.
Rebuild syscall tables.
This paniced my one of my machines one time too many :-( and there is
no sign of a solution in the pipeline. The deltas are still easily
available in cvs. The problem is that if the parent has been swapped
out, the child process cannot grope around in the parent's UPAGES to
see the sigact[] array or it will fault. This probably is a showstopper
for this implementation anyway.
an unexpected user-visible side effect with the sigaction flags. Also cleanup
a minor union issue.
Submitted by: Rudolf Cejka <cejkar@dcse.fee.vutbr.cz>
MFC addendum: MFC will be combined w/ original commit
MFC after: 3 days
rather than grabbing it and releasing it themselves. This allows callers
of these functions to get the lock to close race conditions.
- Grab Giant around ktrace in postsig.
- Count the switches performed on SIGSTOP's as involuntary context switches
in the resource usage stats.
Reported by: tegge (signal race), bde (missing csw stats)
real uid, saved uid, real gid, and saved gid to ucred, as well as the
pcred->pc_uidinfo, which was associated with the real uid, only rename
it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
original macro that pointed.
p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
we figure out locking and optimizations; generally speaking, this
means moving to a structure like this:
newcred = crdup(oldcred);
...
p->p_ucred = newcred;
crfree(oldcred);
It's not race-free, but better than nothing. There are also races
in sys_process.c, all inter-process authorization, fork, exec, and
exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
allocation.
o Clean up ktrcanset() to take into account changes, and move to using
suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
calls to better document current behavior. In a couple of places,
current behavior is a little questionable and we need to check
POSIX.1 to make sure it's "right". More commenting work still
remains to be done.
o Update credential management calls, such as crfree(), to take into
account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
change_euid()
change_egid()
change_ruid()
change_rgid()
change_svuid()
change_svgid()
In each case, the call now acts on a credential not a process, and as
such no longer requires more complicated process locking/etc. They
now assume the caller will do any necessary allocation of an
exclusive credential reference. Each is commented to document its
reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
processes and pcreds. Note that this authorization, as well as
CANSIGIO(), needs to be updated to use the p_cansignal() and
p_cansched() centralized authorization routines, as they currently
do not take into account some desirable restrictions that are handled
by the centralized routines, as well as being inconsistent with other
similar authorization instances.
o Update libkvm to take these changes into account.
Obtained from: TrustedBSD Project
Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
- Require the proc lock be held for killproc() to allow for the vmdaemon to
kill a process when memory is exhausted while holding the lock of the
process to kill.
process on fork(2).
It is the supposed behavior stated in the manpage of sigaction(2), and
Solaris, NetBSD and FreeBSD 3-STABLE correctly do so.
The previous fix against libc_r/uthread/uthread_fork.c fixed the
problem only for the programs linked with libc_r, so back it out and
fix fork(2) itself to help those not linked with libc_r as well.
PR: kern/26705
Submitted by: KUROSAWA Takahiro <fwkg7679@mb.infoweb.ne.jp>
Tested by: knu, GOTOU Yuuzou <gotoyuzo@notwork.org>,
and some other people
Not objected by: hackers
MFC in: 3 days
been made machine independent and various other adjustments have been made
to support Alpha SMP.
- It splits the per-process portions of hardclock() and statclock() off
into hardclock_process() and statclock_process() respectively. hardclock()
and statclock() call the *_process() functions for the current process so
that UP systems will run as before. For SMP systems, it is simply necessary
to ensure that all other processors execute the *_process() functions when the
main clock functions are triggered on one CPU by an interrupt. For the alpha
4100, clock interrupts are delievered in a staggered broadcast fashion, so
we simply call hardclock/statclock on the boot CPU and call the *_process()
functions on the secondaries. For x86, we call statclock and hardclock as
usual and then call forward_hardclock/statclock in the MD code to send an IPI
to cause the AP's to execute forwared_hardclock/statclock which then call the
*_process() functions.
- forward_signal() and forward_roundrobin() have been reworked to be MI and to
involve less hackery. Now the cpu doing the forward sets any flags, etc. and
sends a very simple IPI_AST to the other cpu(s). AST IPIs now just basically
return so that they can execute ast() and don't bother with setting the
astpending or needresched flags themselves. This also removes the loop in
forward_signal() as sched_lock closes the race condition that the loop worked
around.
- need_resched(), resched_wanted() and clear_resched() have been changed to take
a process to act on rather than assuming curproc so that they can be used to
implement forward_roundrobin() as described above.
- Various other SMP variables have been moved to a MI subr_smp.c and a new
header sys/smp.h declares MI SMP variables and API's. The IPI API's from
machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h.
- The globaldata_register() and globaldata_find() functions as well as the
SLIST of globaldata structures has become MI and moved into subr_smp.c.
Also, the globaldata list is only available if SMP support is compiled in.
Reviewed by: jake, peter
Looked over by: eivind
from signal authorization checking.
o p_cansignal() takes three arguments: subject process, object process,
and signal number, unlike p_cankill(), which only took into account
the processes and not the signal number, improving the abstraction
such that CANSIGNAL() from kern_sig.c can now also be eliminated;
previously CANSIGNAL() special-cased the handling of SIGCONT based
on process session. privused is now deprecated.
o The new p_cansignal() further limits the set of signals that may
be delivered to processes with P_SUGID set, and restructures the
access control check to allow it to be extended more easily.
o These changes take into account work done by the OpenBSD Project,
as well as by Robert Watson and Thomas Moestl on the TrustedBSD
Project.
Obtained from: TrustedBSD Project
avoid silly lock contention on sched_lock since in 2 out of the 3 places
that we call stop(), we get sched_lock right after calling it and we were
locking sched_lock inside of stop() anyways.
SIGCHLD to our parent process. Otherwise, we could block while obtaining
the process lock for our parent process and switch out while we were
in SSTOP. Even worse, when we try to resume from the mutex being blocked
on our p_stat will be SRUN, not SSTOP.
- Fix a comment above stop() to indicate that it requires that the proc lock
be held, not a proctree lock.
Reported by: markm
Sleuthing by: jake
Giant. The only exception is the CANSIGNAL() macro. Unlocking the proc
lock around sendsig() in trapsignal() is also questionable. Note that
the functions sigexit(), psignal(), and issignal() must be called with
the proc lock of the process in question held. postsig() and
trapsignal() should not be called with the proc lock held, but they
also do not require Giant anymore either.
- Remove spl's that are now no longer needed as they are fully replaced.
is sent to a process, psignal() needs to schedule an AST for the
process if the process is runnable, not just if it is current, so that
pending signals get checked for on the next return of the process to
user mode. This wasn't practical until recently because the AST flag
was per-cpu so setting it for a non-current process would usually just
cause a bogus AST for the current process.
For non-current processes looping in user mode, it took accidental
(?) magic to deliver signals at all. Signals were usually delivered
late as a side effect of rescheduling (need_resched() sets astpending,
etc.). In pre-SMPng, delivery was delayed by at most 1 quantum (the
need_resched() call in roundrobin() is certain to occur within 1
quantum for looping processes). In -current, things are complicated
by normal interrupt handlers being threads. Missing handling of the
complications makes roundrobin() a bogus no-op, but preemptive
scheduling sort of works anyway due to even larger bogons elsewhere.
- All processes go into the same array of queues, with different
scheduling classes using different portions of the array. This
allows user processes to have their priorities propogated up into
interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
32. We used to have 4 separate arrays of 32 queues each, so this
may not be optimal. The new run queue code was written with this
in mind; changing the number of run queues only requires changing
constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter. This
is intended to be used to create per-cpu run queues. Implement
wrappers for compatibility with the old interface which pass in
the global run queue structure.
- Group the priority level, user priority, native priority (before
propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
This was used to detect when a process' priority had lowered and
it should yield. We now effectively yield on every interrupt.
- Activate propogate_priority(). It should now have the desired
effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
idle loop. It interfered with propogate_priority() because
the idle process needed to do a non-blocking acquire of Giant
and then other processes would try to propogate their priority
onto it. The idle process should not do anything except idle.
vm_page_zero_idle() will return in the form of an idle priority
kernel thread which is woken up at apprioriate times by the vm
system.
- Update struct kinfo_proc to the new priority interface. Deliberately
change its size by adjusting the spare fields. It remained the same
size, but the layout has changed, so userland processes that use it
would parse the data incorrectly. The size constraint should really
be changed to an arbitrary version number. Also add a debug.sizeof
sysctl node for struct kinfo_proc.
attributes. This is needed for AST's to be properly posted in a preemptive
kernel. They are backed by two new flags in p_sflag: PS_ASTPENDING and
PS_NEEDRESCHED. They are still accesssed by their old macros:
aston(), astoff(), etc. For completeness, an astpending() macro has been
added to check for a pending AST, and clear_resched() has been added to
clear need_resched().
- Rename syscall2() on the x86 back to syscall() to be consistent with
other architectures.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
out: label in psignal() did not grab sched_lock before trying to release
it. Also, the previous version had several cases where it grabbed
sched_lock before jumping to out: unneccessarily, so rework this a bit.
The runfast: and out: labels must be called with sched_lock released, and
the run: label must be called with it held. Appropriate mtx_assert()'s
have been added that should catch any bugs that may still be in this
code.
Noticed by: bde
of explicit calls to lockmgr. Also provides macros for the flags
pased to specify shared, exclusive or release which map to the
lockmgr flags. This is so that the use of lockmgr can be easily
replaced with optimized reader-writer locks.
- Add some locking that I missed the first time.
process is on the alternate stack or not. For compatibility
with sigstack(2) state is being updated if such is needed.
We now determine whether the process is on the alternate
stack by looking at its stack pointer. This allows a process
to siglongjmp from a signal handler on the alternate stack
to the place of the sigsetjmp on the normal stack. When
maintaining state, this would have invalidated the state
information and causing a subsequent signal to be delivered
on the normal stack instead of the alternate stack.
PR: 22286
may block on a mutex while on the sleep queue without corrupting
it.
- Move dropping of Giant to after the acquire of sched_lock.
Tested by: John Hay <jhay@icomtek.csir.co.za>
jhb
acquire Giant as needed in functions that call mi_switch(). The releases
need to be done outside of the sched_lock to avoid potential deadlocks
from trying to acquire Giant while interrupts are disabled.
Submitted by: witness
syscall compare against a variable sv_minsigstksz in struct
sysentvec as to properly take the size of the machine- and
ABI dependent struct sigframe into account.
The SVR4 and iBCS2 modules continue to have a minsigstksz of
8192 to preserve behavior. The real values (if different) are
not known at this time. Other ABI modules use the real
values.
The native MINSIGSTKSZ is now defined as follows:
Arch MINSIGSTKSZ
---- -----------
alpha 4096
i386 2048
ia64 12288
Reviewed by: mjacob
Suggested by: bde
the 128-bit sigset_t changes by moving conditionally (rarely) executed
code to the beginning where it is always executed, and since this code
now involves 3 128-bit operations, the pessimization was relatively
large. This change speeds up lmbench's pipe latency benchmark by
3.5%.
Fixed style bugs in CURSIG().
very bloated, first with 128-bit sigset_t's, then with locking in the
SMP case, then with locking in all cases. The space bloat was probably
also time bloat, partly because the fast path through CURSIG() was
pessimized by the sigset_t changes. This change speeds up lmbench's
pipe-based latency benchmark by 4% on a Celeron. <sys/signalvar.h>
had become very polluted to support the bloat.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
int p_can(p1, p2, operation, privused)
which allows specification of subject process, object process,
inter-process operation, and an optional call-by-reference privused
flag, allowing the caller to determine if privilege was required
for the call to succeed. This allows jail, kern.ps_showallprocs and
regular credential-based interaction checks to occur in one block of
code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL,
and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a
series of static function checks in kern_prot, which should not
be invoked directly.
o Commented out capabilities entries are included for some checks.
o Update most inter-process authorization to make use of p_can() instead
of manual checks, PRISON_CHECK(), P_TRESPASS(), and
kern.ps_showallprocs.
o Modify suser{,_xxx} to use const arguments, as it no longer modifies
process flags due to the disabling of ASU.
o Modify some checks/errors in procfs so that ENOENT is returned instead
of ESRCH, further improving concealment of processes that should not
be visible to other processes. Also introduce new access checks to
improve hiding of processes for procfs_lookup(), procfs_getattr(),
procfs_readdir(). Correct a bug reported by bp concerning not
handling the CREATE case in procfs_lookup(). Remove volatile flag in
procfs that caused apparently spurious qualifier warnigns (approved by
bde).
o Add comment noting that ktrace() has not been updated, as its access
control checks are different from ptrace(), whereas they should
probably be the same. Further discussion should happen on this topic.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
defined. This boils down to conditionally compile the
old signal syscalls.
We might want to extend the types in syscalls.master to
make these syscalls conditionally on something more
appropriate than COMPAT_43.
the gating of system calls that cause modifications to the underlying
filesystem. The gating can be enabled by any filesystem that needs
to consistently suspend operations by adding the vop_stdgetwritemount
to their set of vnops. Once gating is enabled, the function
vfs_write_suspend stops all new write operations to a filesystem,
allows any filesystem modifying system calls already in progress
to complete, then sync's the filesystem to disk and returns. The
function vfs_write_resume allows the suspended write operations to
begin again. Gating is not added by default for all filesystems as
for SMP systems it adds two extra locks to such critical kernel
paths as the write system call. Thus, gating should only be added
as needed.
Details on the use and current status of snapshots in FFS can be
found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness
is not included here. Unless and until you create a snapshot file,
these changes should have no effect on your system (famous last words).
after the acquisition of any advisory locks. This fix corrects a case
in which a process tries to open a file with a non-blocking exclusive
lock. Even if it fails to get the lock it would still truncate the
file even though its open failed. With this change, the truncation
is done only after the lock is successfully acquired.
Obtained from: BSD/OS
syscall path inward. A system call may select whether it needs the MP
lock or not (the default being that it does need it).
A great deal of conditional SMP code for various deadended experiments
has been removed. 'cil' and 'cml' have been removed entirely, and the
locking around the cpl has been removed. The conditional
separately-locked fast-interrupt code has been removed, meaning that
interrupts must hold the CPL now (but they pretty much had to anyway).
Another reason for doing this is that the original separate-lock for
interrupts just doesn't apply to the interrupt thread mechanism being
contemplated.
Modifications to the cpl may now ONLY occur while holding the MP
lock. For example, if an otherwise MP safe syscall needs to mess with
the cpl, it must hold the MP lock for the duration and must (as usual)
save/restore the cpl in a nested fashion.
This is precursor work for the real meat coming later: avoiding having
to hold the MP lock for common syscalls and I/O's and interrupt threads.
It is expected that the spl mechanisms and new interrupt threading
mechanisms will be able to run in tandem, allowing a slow piecemeal
transition to occur.
This patch should result in a moderate performance improvement due to
the considerable amount of code that has been removed from the critical
path, especially the simplification of the spl*() calls. The real
performance gains will come later.
Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
p_trespass(struct proc *p1, struct proc *p2)
which returns zero or an errno depending on the legality of p1 trespassing
on p2.
Replace kern_sig.c:CANSIGNAL() with call to p_trespass() and one
extra signal related check.
Replace procfs.h:CHECKIO() macros with calls to p_trespass().
Only show command lines to process which can trespass on the target
process.
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
structures for list operations. This patch makes all list operations
in sys/kern use the queue(3) macros, rather than directly accessing the
*Q_{HEAD,ENTRY} structures.
This batch of changes compile to the same object files.
Reviewed by: phk
Submitted by: Jake Burkholder <jake@checker.org>
PR: 14914
can provide the correct context to each signal handler.
Fix broken sigsuspend(): don't use p_oldsigmask as a flag, use SAS_OLDMASK
as we did before the linuxthreads support merge (submitted by bde).
Move ps_sigstk from to p_sigacts to the main proc structure since signal
stack should not be shared among threads.
Move SAS_OLDMASK and SAS_ALTSTACK flags from sigacts::ps_flags to proc::p_flag.
Move PS_NOCLDSTOP and PS_NOCLDWAIT flags from proc::p_flag to procsig::ps_flag.
Reviewed by: marcel, jdp, bde
-----------------------------
The core of the signalling code has been rewritten to operate
on the new sigset_t. No methodological changes have been made.
Most references to a sigset_t object are through macros (see
signalvar.h) to create a level of abstraction and to provide
a basis for further improvements.
The NSIG constant has not been changed to reflect the maximum
number of signals possible. The reason is that it breaks
programs (especially shells) which assume that all signals
have a non-null name in sys_signame. See src/bin/sh/trap.c
for an example. Instead _SIG_MAXSIG has been introduced to
hold the maximum signal possible with the new sigset_t.
struct sigprop has been moved from signalvar.h to kern_sig.c
because a) it is only used there, and b) access must be done
though function sigprop(). The latter because the table doesn't
holds properties for all signals, but only for the first NSIG
signals.
signal.h has been reorganized to make reading easier and to
add the new and/or modified structures. The "old" structures
are moved to signalvar.h to prevent namespace polution.
Especially the coda filesystem suffers from the change, because
it contained lines like (p->p_sigmask == SIGIO), which is easy
to do for integral types, but not for compound types.
NOTE: kdump (and port linux_kdump) must be recompiled.
Thanks to Garrett Wollman and Daniel Eischen for pressing the
importance of changing sigreturn as well.
than a review, this was a nice puzzle.
This is supposed to be binary and source compatible with older
applications that access the old FreeBSD-style three arguments to a
signal handler.
Except those applications that access hidden signal handler arguments
bejond the documented third one. If you have applications that do,
please let me know so that we take the opportunity to provide the
functionality they need in a documented manner.
Also except application that use 'struct sigframe' directly. You need
to recompile gdb and doscmd. `make world` is recommended.
Example program that demonstrates how SA_SIGINFO and old-style FreeBSD
handlers (with their three args) may be used in the same process is at
http://www3.cons.org/tmp/fbsd-siginfo.c
Programs that use the old FreeBSD-style three arguments are easy to
change to SA_SIGINFO (although they don't need to, since the old style
will still work):
Old args to signal handler:
void handler_sn(int sig, int code, struct sigcontext *scp)
New args:
void handler_si(int sig, siginfo_t *si, void *third)
where:
old:code == new:second->si_code
old:scp == &(new:si->si_scp) /* Passed by value! */
The latter is also pointed to by new:third, but accessing via
si->si_scp is preferred because it is type-save.
FreeBSD implementation notes:
- This is just the framework to make the interface POSIX compatible.
For now, no additional functionality is provided. This is supposed
to happen now, starting with floating point values.
- We don't use 'sigcontext_t.si_value' for now (POSIX meant it for
realtime-related values).
- Documentation will be updated when new functionality is added and
the exact arguments passed are determined. The comments in
sys/signal.h are meant to be useful.
Reviewed by: BDE
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
This takes the conditionals out of the code that has been tested by
various people for a while.
ps and friends (libkvm) will need a recompile as some proc structure
changes are made.
Submitted by: "Richard Seaman, Jr." <dick@tar.com>
Submitted by: "Richard Seaman, Jr." <lists@tar.com>
Obtained from: linux :-)
Code to allow Linux Threads to run under FreeBSD.
By default not enabled
This code is dependent on the conditional
COMPAT_LINUX_THREADS (suggested by Garret)
This is not yet a 'real' option but will be within some number of hours.
by bde, a few other tweaks to get the patch to apply cleanly again and
some improvements to the comments.
This change closes some fairly minor security holes associated with
F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN
had on tty devices. For more details, see the description on the PR.
Because this patch increases the size of the proc and pgrp structures,
it is necessary to re-install the includes and recompile libkvm,
the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w.
PR: kern/7899
Reviewed by: bde, elvind
object format of the executable being dumped. This is the first
step toward producing ELF core dumps in the proper format. I will
commit the code to generate the ELF core dumps Real Soon Now. In
the meantime, ELF executables won't dump core at all. That is
probably no less useful than dumping a.out-style core dumps as they
have done until now.
Submitted by: Alex <garbanzo@hooked.net> (with very minor changes by me)
respectively. Most of the longs should probably have been
u_longs, but this changes is just to prevent warnings about
casts between pointers and integers of different sizes, not
to fix poorly chosen types.
you can specify the corefile name by using:
sysctl -w kern.corefile="format"
where format is a pathname (relative or absolute -- default is "%N.core"),
with "%N" (process name), "%P" (process ID), and "%U" (user ID) formats.
Reviewed by: Mike Smith, with strong requests by Julian :)
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
the signal handling latency for cpu-bound processes that performs very
few system calls.
The IPI for forcing an additional software trap is no longer dependent upon
BETTER_CLOCK being defined.
