The existing version depends on register_t and uintptr_t, which are only
available when including headers such as <sys/types.h>. As this macro is
used by <sys/socket.h>, for example, it should be written in such a way
that it doesn't depend on those types.
In r227474, this header file was changed to define SIG_ATOMIC_{MIN,MAX}
in terms of LONG_{MIN,MAX}. Unlike all of the definitions in this header
file, LONG_{MIN,MAX} is provided by <limits.h>. Remove the dependency on
<limits.h> by using __LONG_{MIN,MAX} instead and including
<machine/_limits.h>.
This change is needed to make SIG_ATOMIC_{MIN,MAX} work without
including any other header files.
This header uses __INT_MIN and __INT_MAX, which is provided by
<machine/_limits.h>. This is needed to make <stdint.h>'s WCHAR_MIN and
WCHAR_MAX work without including other headers as well.
switching between LAPIC modes is not supported, and there is no need
to wait for IPI ack in x2APIC mode. So the calibrated delay is only
needed for !x2APIC.
This saves around a second of boot time on the real hardware for
x2APIC.
Sponsored by: The FreeBSD Foundation
Add implementations of bus_map/unmap_resource to the x86 nexus driver.
Change bus_activate/deactivate_resource to honor RF_UNMAPPED and to
use bus_map/unmap_resource to create/destroy the implicit mapping when
RF_UNMAPPED is not set.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
if specific CPU features are not present.
Some simulation environments, e.g. gem5, have been found to require more
TLB management from the kernel in certain setups. It is currently unclear why.
Turning on the workaround_erratum383 seems to help and make problems (panics)
go away.
Given this is a fairly uncommon environment so far, allowing the workaround
to be manually enabled from loader in order to make debugging and comparing
traces easier, but also to allow gem5 run FreeBSD in X86 timing mode, seems
to be the least intrusive option for now until the issue if fully understood.
Sponsored by: DARPA/AFRL
Reviewed by: kib, alc (earlier)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6206
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Compared to the r298933, this version uses 'struct _cpuset' in
<sys/bus.h> instead of 'cpuset_t' to avoid requiring <sys/param.h>
(<sys/_cpuset.h> still requires <sys/param.h> for MAXCPU even though
<sys/_bitset.h> does not after recent changes).
Instead of panicking when parsing an invalid ACPI SRAT table,
just ignore it, effectively disabling NUMA.
https://lists.freebsd.org/pipermail/freebsd-current/2016-May/060984.html
Reported and tested by: Bill O'Hanlon (bill.ohanlon at gmail.com)
Reviewed by: jhb
MFC after: 1 week
Relnotes: If dmesg shows "SRAT: Duplicate local APIC ID",
try updating your BIOS to fix NUMA support.
Sponsored by: Dell Inc.
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Reviewed by: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5519
This is going to be used by the Xen clock on Dom0 in order to set the RTC of
the host. The current logic in atrtc_settime is moved to atrtc_set and the
unused device_t parameter is removed from the atrtc_set function call so it
can be safely used by other callers.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, jhb
Differential revision: https://reviews.freebsd.org/D6067
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
If we reached MAXMEMDOM, we would previously try to insert an additional
element and only detect overflow after causing (probably trivial) memory
overflow. Instead, detect the ndomain > MAXMEMDOM case before we write past
the end.
Reported by: Coverity
CID: 1354783
Sponsored by: EMC / Isilon Storage Division
which queued invalidation completion interrupt is requested with
regard to the queued invalidation requests. In other words, setting
the value of the knob to N requests completion interrupt after N items
are processed. Existing behaviour is restored by setting
hw.dmar.batch_coalesce=1.
The knob significantly decreases the DMAR qi interrupt rate at the
cost of slightly longer DMAR map entries recycling.
Sponsored by: The FreeBSD Foundation
initially configured in the TSC deadline mode, eventtimer subsystem
can be switched to periodic, and then DCR register is loaded with
unitialized value.
Reset the LAPIC eventtimer frequency and min/max periods when changing
between deadline and counted periodic modes.
Reported and tested by: Vladimir Zakharov <zakharov.vv@gmail.com>
Sponsored by: The FreeBSD Foundation
Revert r292255 because it can create bounced regions without contiguous
page offsets, which is needed for USB devices.
Another solution would be to force bouncing the full buffer always (even
when only one page requires bouncing), but this seems overly complicated and
unnecessary, and it will probably involve using more bounce pages than the
current code.
Reported by: phk
system. This uses the hints mechnanism. This mostly works today
because when there's no static hints (the default), this value can be
fetched from the hint. When there is a static hints file, the hint
passed from the boot loader to the kernel is ignored, but for the BIOS
case we're able to find it anyway. However, with UEFI, the fallback
doesn't work, so we get a panic instead.
Switch to acpi.rsdp and use TUNABLE_ULONG_FETCH instead. Continue to
generate the old values to allow for transitions. In addition, fall
back to the old method if the new method isn't present.
Add comments about all this.
Differential Revision: https://reviews.freebsd.org/D5866
Some BIOSes disable AMD Topology extension on AMD Family 15h notebook
processors. We re-enable the extension, so that we can properly discover
core and cache topology. Linux seems to do the same.
Reported by: Johannes Dieterich <dieterich.joh@gmail.com>
Reviewed by: jhb, kib
Tested by: Johannes Dieterich <dieterich.joh@gmail.com>
(earlier version)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D5883
VM_NUMA_ALLOC is used to enable use of domain-aware memory allocation in
the virtual memory system. DEVICE_NUMA is used to enable affinity
reporting for devices such as bus_get_domain().
MAXMEMDOM must still be set to a value greater than for any NUMA support
to be effective. Note that 'cpuset -gd' always works if MAXMEMDOM is
enabled and the system supports NUMA.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5782
It is needed by the hypervisor FreeBSD guest to allocate/free private
interrupt vectors.
Reviewed by: kib, jhb, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5849
Previously, the code determined a topology of processing units
(hardware threads, cores, packages) and then deduced a cache topology
using certain assumptions. The new code builds a topology that
includes both processing units and caches using the information
provided by the hardware.
At the moment, the discovered full topology is used only to creeate
a scheduling topology for SCHED_ULE.
There is no KPI for other kernel uses.
Summary:
- based on APIC ID derivation rules for Intel and AMD CPUs
- can handle non-uniform topologies
- requires homogeneous APIC ID assignment (same bit widths for ID
components)
- topology for dual-node AMD CPUs may not be optimal
- topology for latest AMD CPU models may not be optimal as the code is
several years old
- supports only thread/package/core/cache nodes
Todo:
- AMD dual-node processors
- latest AMD processors
- NUMA nodes
- checking for homogeneity of the APIC ID assignment across packages
- more flexible cache placement within topology
- expose topology to userland, e.g., via sysctl nodes
Long term todo:
- KPI for CPU sharing and affinity with respect to various resources
(e.g., two logical processors may share the same FPU, etc)
Reviewed by: mav
Tested by: mav
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D2728
Simplify and unify placeholder type definitions.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D5771
- fix UP build [1]
- do not obliterate initial reading of rdtsc by the loop counter [2]
- restore the meaning of the argument -1 to native_lapic_ipi_wait()
as wait until LAPIC acknowledge without timeout
- correct formula for calculating loop iteration count for 1us, it was
inverted, and ensure that even on unlikely slow CPUs at least one
check for ack is performed.
Reported by: Michael Butler <imb@protected-networks.net> [1], rpokala[2],
jhb[3]
Tested by: Michael Butler
Pointy hat to: kib
Sponsored by: The FreeBSD Foundation
and avoid a delay while waiting for IPI delivery acknowledgement in
xAPIC mode. This makes the loop exit immediately after the delivery
bit in APIC_ICR register is set, instead of waiting for some
microseconds.
We only need to ensure that some amount of time is allowed for the
LAPIC to react to the command, and we need that the wait time is
finite and reasonable. For that reasons, it is irrelevant if the CPU
frequency or throttling decrease the speed and make the loop,
calibrated for full CPU speed at boot time, execute somewhat slower.
Discussed with: bde, jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
deadline mode the divide configuration is not used and
lapic_timer_divisor is not set.
Reported by: dhw, mav
Tested by: mav
Sponsored by: The FreeBSD Foundation
LAPIC timer iinterrupt when TSC reaches the value written to the
IA32_TSC_DEADLINE MSR. To arm or reset the timer in deadline mode, a
single non-serializing MSR write is enough. This is an advance from
the one-shot mode of LAPIC, where timer operated with the FSB
frequency and required two (serialized in case of xAPIC) writes to the
APIC registers.
The LVT_TIMER register value is cached to avoid unneeded writes in the
deadline mode. Unused arguments to specify period (which is passed in
struct lapic as la_timer_period) and interrupt enable (which is always
enabled) are removed from lapic_timer_{oneshot,periodic,deadline}
functions. Instead, special lapic_timer_oneshot_nointr() function for
interrupt-less one-shot calibration is added.
Reviewed by: mav (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D5738
This moves the enabling of interrupts slightly earlier (the old location
was still before devices were enumerated and probed) and does it in the
interrupt code (rather than in the device configuration code). This
also avoids tripping over an assertion on the first TLB shootdown with
earlier AP startup.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D5710
An IPI cannot be sent via the local APIC if a previous IPI is still
being delivered. Attempts to send an IPI will wait for a pending IPI
to clear. Prior to r278325 these checks used a spin loop with a
hardcoded maximum count which broke AP startup on some systems.
However, r278325 also enforced a minimum latency of 5 microseconds if an
IPI was still pending which resulted in a measurable performance hit.
This change reduces that minimum latency to 1 microsecond.
Tested by: stas
MFC after: 3 days
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
Summary:
The idea behind this is '~0ul' is well-defined, and casting to uintmax_t, on a
32-bit platform, will leave the upper 32 bits as 0. The maximum range of a
resource is 0xFFF.... (all bits of the full type set). By dropping the 'ul'
suffix, C type promotion rules apply, and the sign extension of ~0 on 32 bit
platforms gets it to a type-independent 'unsigned max'.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5255
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
acpi_GetInteger() execution. Intel DMAR interrupt remapping code
needs to know UID of the HPET to properly route the FSB interrupts
from the HPET, even when interrupt remapping is disabled, and the code
is executed under some non-sleepable mutexes.
Cache HPET UIDs in the device softc at the attach time and provide
lock-less method to get UID, use the method from the dmar hpet
handling code instead of calling GetInteger().
Reported and tested by: Larry Rosenman <ler@lerctr.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
ucontext_t available. Our code even has XXX comment about this.
Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.
Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.
Apparently mips _types.h pollutes global namespace with f_register_t
type definition. This commit does not try to fix the issue.
PR: 207079
Reported and tested by: Ting-Wei Lan <lantw44@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
This is first step to move the generic part of HV code into kernel instead
of module, so that it is possible to use hypercall to implement some other
paravirtualization code in the kernel.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: royger, delphij, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D3072
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
While here, move the common bits of <machine/cputypes.h> to
<x86/cputypes.h> as well.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D4670
"The availability of CLWB instruction is indicated by the presence of
the CPUID feature flag CLWB (bit 24 of the EBX register)."
CLWB is similar to CLFLUSHOPT, except that it is not required to discard
cacheline contents.
"On processors that supports PCOMMIT, PCOMMIT is enumerated through
CPUID (CPUID.7.0.EBX[22]) only when the feature is enabled by BIOS."
PCOMMIT is used to cause store-to-memory operations to become persistent
(protected from power failure).
Sponsored by: EMC / Isilon Storage Division
Current code doesn't try to make use of the full page when bouncing because
the size is only expanded to be a multiple of the alignment. Instead try to
always create segments of PAGE_SIZE when using bounce pages.
This allows us to remove the specific casing done for
BUS_DMA_KEEP_PG_OFFSET, since the requirement is to make sure the offsets
into contiguous segments are aligned, and now this is done by default.
Sponsored by: Citrix Systems R&D
Reviewed by: hps, kib
Differential revision: https://reviews.freebsd.org/D4119
new headers x86/include x86_var.h and x86_smp.h.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4358
suppression but the version of the IOAPIC reported is 0x11 and neither
IOAPIC EOIR nor the Linux trick of temporal reprogramming of the pin
to edge-trigger mode to issue EOI work.
Disable eoi suppression if KVM is detected. The mode can still be
forced with the tunable.
Reported and tested by: Roman Mamontov <mr.xanto@gmail.com>
Sponsored by: The FreeBSD Foundation
the PG_G global pte flag, pmap_invalidate_all() fails to flush global
TLB entries [*]. This is because TLB shootdown handler for such
configs reloads CR3, and on i386 pmap_invalidate_all() does the same
for the initiating CPU. Note that current code does not issue total
invalidation requests for the kernel_pmap.
Rename amd64 function invltlb_globpcid() to invltlb_glob(), it is not
specific for PCID for quite some time, and implement the same
functionality for i386. Use the function instead of invltlb() in
shootdown handlers and in i386 pmap_invalidate_all(), but only for the
kernel pmap (which maps pages with the PG_G attribute set), which
takes care of PG_G TLB entries on flush.
To detect the affected pmap in i386 TLB shootdown handler, pmap should
be passed to the smp_masked_invltlb() function, which makes amd64 and
i386 TLB shootdown code almost identical. Merge the code under x86/.
Noted by: jhb [*]
Reviewed by: cem, jhb, pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4346
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
the map has been created via bounce_bus_dmamem_alloc(). In that case
bus_dmamap_unload(9) typically isn't called during normal operation
but still should be during detach, cleanup from failed attach etc.
Submitted by: yongari
MFC after: 3 days
map has been created via bounce_bus_dmamem_alloc(). Even for coherent
DMA - which bus_dmamem_alloc(9) typically is used for -, calling of
bus_dmamap_sync(9) isn't optional.
PR: 188899 (non-original problem)
MFC after: 3 days
Current Xen resume code clears all pending bitmap IPIs on resume, which is
not correct. Instead re-inject bitmap IPI vectors on resume to all CPUs in
order to acknowledge any pending bitmap IPIs.
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
All event channels are torn down when performing a migration on Xen, make
sure all handlers are also removed and the event channel structure is
properly disposed so it can be reused.
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
This is needed so interrupt handlers can be removed while the PIC is
resuming, it was previously not possible due to intr_resume holding the
intr_table_lock and intr_remove_handler recursing on it.
Sponsored by: Citrix Systems R&D
Reviewed by: kib (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4114
The implementation of bus_dmamap_load_ma_triv currently calls
_bus_dmamap_load_phys on each page that is part of the passed in buffer.
Since each page is treated as an individual buffer, the resulting behaviour
is different from the behaviour of _bus_dmamap_load_buffer. This breaks
certain drivers, like Xen blkfront.
If an unmapped buffer of size 4096 that starts at offset 13 into the first
page is passed to the current _bus_dmamap_load_ma implementation (so the ma
array contains two pages), the result is that two segments are created, one
with a size of 4083 and the other with size 13 (because two independant
calls to _bus_dmamap_load_phys are performed, one for each physical page).
If the same is done with a mapped buffer and calling _bus_dmamap_load_buffer
the result is that only one segment is created, with a size of 4096.
This patch relegates the usage of bus_dmamap_load_ma_triv in x86 bounce
buffer code to drivers requesting BUS_DMA_KEEP_PG_OFFSET and implements
_bus_dmamap_load_ma so that it's behaviour is the same as the mapped version
(_bus_dmamap_load_buffer). This patch only modifies the x86 bounce buffer
code, other arches are left untouched.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, jah (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D888
variable during mp_start() which is too late. Move this to mp_setmaxid()
where other architectures set it and move x86 assertions to MI code.
Reviewed by: kib (x86 part)
Fix two issues with the current event channel code, first ENABLED_SETSIZE is
not correctly defined and then using a BITSET to store the per-cpu masks is
not portable to other arches, since on arm32 the event channel arrays shared
with the hypervisor are of type uint64_t and not long. Partially restore the
previous code but switch the bit operations to use the recently introduced
xen_{set/clear/test}_bit versions.
Reviewed by: Julien Grall <julien.grall@citrix.com>
Sponsored by: Citrix Systems R&D
Differential Revision: https://reviews.freebsd.org/D4080
This will enable the elimination of a workaround in the USB driver that
artifically allocates buffers twice as big as they need to be (which
actually saves memory for very small buffers on the buggy platforms).
When deciding how to allocate a dma buffer, armv4, armv6, mips, and
x86/iommu all correctly check for the tag alignment <= maxsize as enabling
simple uma/malloc based allocation. Powerpc, sparc64, x86/bounce, and
arm64/bounce were all checking for alignment < maxsize; on those platforms
when alignment was equal to the max size it would fall back to page-based
allocators even for very small buffers.
This change makes all platforms use the <= check. It should be noted that
on all platforms other than arm[v6] and mips, this check is relying on
undocumented behavior in malloc(9) that if you allocate a block of a given
size it will be aligned to the next larger power-of-2 boundary. There is
nothing in the malloc(9) man page that makes that explicit promise (but the
busdma code has been relying on this behavior all along so I guess it works).
Arm and mips code uses the allocator in kern/subr_busdma_buffalloc.c, which
does explicitly implement this promise about size and alignment. Other
platforms probably should switch to the aligned allocator.
The new load_ma implementation can cause dereferences when used with
certain drivers, back it out until the reason is found:
Fatal trap 12: page fault while in kernel mode
cpuid = 11; apic id = 03
fault virtual address = 0x30
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff808a2d22
stack pointer = 0x28:0xfffffe07cc737710
frame pointer = 0x28:0xfffffe07cc737790
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 13 (g_down)
trap number = 12
panic: page fault
cpuid = 11
KDB: stack backtrace:
#0 0xffffffff80641647 at kdb_backtrace+0x67
#1 0xffffffff80606762 at vpanic+0x182
#2 0xffffffff806067e3 at panic+0x43
#3 0xffffffff8084eef1 at trap_fatal+0x351
#4 0xffffffff8084f0e4 at trap_pfault+0x1e4
#5 0xffffffff8084e82f at trap+0x4bf
#6 0xffffffff80830d57 at calltrap+0x8
#7 0xffffffff8063beab at _bus_dmamap_load_ccb+0x1fb
#8 0xffffffff8063bc51 at bus_dmamap_load_ccb+0x91
#9 0xffffffff8042dcad at ata_dmaload+0x11d
#10 0xffffffff8042df7e at ata_begin_transaction+0x7e
#11 0xffffffff8042c18e at ataaction+0x9ce
#12 0xffffffff802a220f at xpt_run_devq+0x5bf
#13 0xffffffff802a17ad at xpt_action_default+0x94d
#14 0xffffffff802c0024 at adastart+0x8b4
#15 0xffffffff802a2e93 at xpt_run_allocq+0x193
#16 0xffffffff802c0735 at adastrategy+0xf5
#17 0xffffffff80554206 at g_disk_start+0x426
Uptime: 2m29s
The implementation of bus_dmamap_load_ma_triv currently calls
_bus_dmamap_load_phys on each page that is part of the passed in buffer.
Since each page is treated as an individual buffer, the resulting behaviour
is different from the behaviour of _bus_dmamap_load_buffer. This breaks
certain drivers, like Xen blkfront.
If an unmapped buffer of size 4096 that starts at offset 13 into the first
page is passed to the current _bus_dmamap_load_ma implementation (so the ma
array contains two pages), the result is that two segments are created, one
with a size of 4083 and the other with size 13 (because two independant
calls to _bus_dmamap_load_phys are performed, one for each physical page).
If the same is done with a mapped buffer and calling _bus_dmamap_load_buffer
the result is that only one segment is created, with a size of 4096.
This patch relegates the usage of bus_dmamap_load_ma_triv in x86 bounce
buffer code to drivers requesting BUS_DMA_KEEP_PG_OFFSET and implements
_bus_dmamap_load_ma so that it's behaviour is the same as the mapped version
(_bus_dmamap_load_buffer). This patch only modifies the x86 bounce buffer
code, other arches are left untouched.
Reviewed by: kib, jah
Differential Revision: https://reviews.freebsd.org/D888
Sponsored by: Citrix Systems R&D
xen/hypervisor.h:
- Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain,
is_running_on_xen
- Remove unused define CONFIG_X86_PAE
- Remove unused variable xen_start_info: note that it's used inpcifront
which is not built at all
- Remove forward declaration of HYPERVISOR_crash
xen/xen-os.h:
- Remove unused define CONFIG_X86_PAE
- Drop unused helpers: test_and_clear_bit, clear_bit,
force_evtchn_callback
- Implement a generic version (based on ofed/include/linux/bitops.h) of
set_bit and test_bit and prefix them by xen_ to avoid any use by other
code than Xen. Note that It would be worth to investigate a generic
implementation in FreeBSD.
- Replace barrier() by __compiler_membar()
- Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop
= pause
xen/xen_intr.h:
- Move the prototype of xen_intr_handle_upcall in it: Use by all the
platform
x86/xen/xen_intr.c:
- Use BITSET* for the enabledbits: Avoid to use custom helpers
- test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit
- Don't export the variable xen_intr_pcpu
dev/xen/blkback/blkback.c:
- Fix the string format when XBB_DEBUG is enabled: host_addr is typed
uint64_t
dev/xen/balloon/balloon.c:
- Remove set but not used variable
- Use the correct type for frame_list: xen_pfn_t represents the frame
number on any architecture
dev/xen/control/control.c:
- Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback
means the driver can handle this device. If by any chance xenstore is the
first driver, every new device with the driver is unset will use
xenstore.
dev/xen/grant-table/grant_table.c:
- Remove unused cmpxchg
- Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't
contain anything required for the code on x86
dev/xen/netfront/netfront.c:
- Use the correct type for rx_pfn_array: xen_pfn_t represents the frame
number on any architecture
dev/xen/netback/netback.c:
- Use the correct type for gmfn: xen_pfn_t represents the frame number on
any architecture
dev/xen/xenstore/xenstore.c:
- Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback
means the driver can handle this device. If by any chance xenstore is the
first driver, every new device with the driver is unset will use xenstore.
Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore
arch-specific code. Although, a new series will add some helpers that differ
between x86 and ARM64, so I've kept the headers for now.
Submitted by: Julien Grall <julien.grall@citrix.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D3921
Sponsored by: Citrix Systems R&D
amd64 and i386 platform code contain very similar xen/xen-os.h
The only differences are:
- Functions/variables/types which were unused in i386/xen/xen-os.h:
* xen_xchg
* __xchg_dummy
* __xg
* __xchg
* atomic_t
* atomic_inc
* rdtscll
The functions/variables/types unused in xen-os.h can be dropped and there
is no more differences betwen amd64 and i386.
The new header is placed in x86/include/xen and each platform will have
dummy headers include x86/xen/*.h. This is to be able to include
machine/xen/*.h in the PV drivers.
Submitted by: Julien Grall <julien.grall@citrix.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D3880
Sponsored by: Citrix Systems R&D
When the system has more than a single PCI domain, the bus numbers
are not unique, thus they cannot be used for "pci" device numbering.
Change bus numbers to -1 (i.e. to-be-determined automatically)
wherever the code did not care about domains.
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3406
that was recently added for Lenovo laptops.
This is a prime candidate for conversion into a table and also
checking other fields like "product".
Tested:
* ASUS UX31E
running thread.
It is currently implemented only on amd64 and i386; on these
architectures, it is implemented by raising an NMI on the CPU on which
the target thread is currently running. Unlike stack_save_td(), it may
fail, for example if the thread is running in user mode.
This change also modifies the kern.proc.kstack sysctl to use this function,
so that stacks of running threads are shown in the output of "procstat -kk".
This is handy for debugging threads that are stuck in a busy loop.
Reviewed by: bdrewery, jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3256
since on amd64 the first argument to a function is generally not on the
stack.
Revert an old DTrace bug fix to some code that assumed that
sizeof(struct amd64_frame) == 16.
Reviewed by: jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3255
Add a check to preload_search_info to make sure mod is set. Most of the
callers of preload_search_info don't check that the mod parameter is
set, which can cause page faults. While at it, remove some now unnecessary
checks before calling preload_search_info.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D3440
Introduce two new loader tunnables that can be used to disable PV disks and
PV nics at boot time. They default to 0 and should be set to 1 (or any
number different than 0) in order to disable the PV devices:
hw.xen.disable_pv_disks=1
hw.xen.disable_pv_nics=1
In /boot/loader.conf will disable both PV disks and nics.
Sponsored by: Citrix Systems R&D
Tested by: Karl Pielorz <kpielorz_lst@tdx.co.uk>
MFC after: 1 week
believe that the bug only affects mobile CPUs, at least I did not see
other reports, but it is impossible to detect it in madt_setup_local().
While there, reduce duplication in the information strings printed
when x2APIC is auto-disabled, and do not print the line when user
manually override the setting.
Tested and reviewed by: royger (previous version)
Sponsored by: The FreeBSD Foundation
