Module) and FBM (Fibre Buffer Modules). Also remember to clear the
semaphore registers. Tell the RISC processor to not halt on FPM
parity errors.
Throw out the ISP_CFG_NOINIT silliness and instead go to the use of
adapter 'roles' to see whether one completes initialization or not
(mostly for Fibre Channel). The ultimate intent, btw, of all of this
is to have a warm standby adapter for failover reasons. Because
we do roles now, setting of Target Capable Class 3 service parameters
in the ICB for the 2x00 cards reflects from role. Also, in isp_start,
if we're not supporting an initiator role, we bounce outgoing commands
with a Selection Timeout error. Also clean out the TOGGLE_TMODE
goop for FC- there is no toggling of target mode like there is
for parallel SCSI cards.
Do more cleanup with respect to using target ids 0..125 in F-port
topologies. Also keep track of things which *were* fabric devices
so that when you rescan the fabric you can notify the outer layers
when fabric devices go away.
Only force a LOGOUT for fabric devices if they're still logged in
(i.e., you cat their Port Database entry. Clean up the Get All Next
scanning.
Finally, use a new tag in the softc to store the opcode for the
last mailbox command used so we can report which opcode timed
out.
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
broken the handling of uncompressed VJ packets. The attached diff should
hopefully fix that.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: Sergio de Souza Prallon <prallon@tmp.com.br>
varargs function, which lead to one of the arguments was left out. This resulted
in failure when inwoking mtree, warning message "mtree returned a non-zero
status - continuing" and probably is the reason for zillion mtree errors on
bento.
non-advertised option (F = "FreeBSD only"), and leave the A key with
standard partitioning. It seems people still want a runtime backdoo
to get to dangerously dedicated mode.
at people. This has been sitting in my tree for a few months now. I
have spoken with quite a few folks about this and the support for doing
this was pretty strong. I dont remember names though, so I cannot share
the blame :-(. Note that this does not *remove* DD mode, it just stops
waving it at new users. You can still set it via config files etc, and
the bootblocks and kernel still support it. You can still use disklabel
to make true DD disks.
time I tinkered around here. Since INTREN is called from the interrupt
critical path now, it should not be too expensive. In this case, we
look at the bits being changed to decide which 8 bit IO port to write to
rather than unconditionally writing to both. I could probably have gone
further and only done the write if the bits actually changed, but that
seemed overkill for the usual case in interrupt threads.
[an outb is rather expensive when it has to cross the ISA bus]
exactly the same functionality via a sysctl, making this feature
a run-time option.
The default is 1(ON), which means that /dev/random device will
NOT block at startup.
setting kern.random.sys.seeded to 0(OFF) will cause /dev/random
to block until the next reseed, at which stage the sysctl
will be changed back to 1(ON).
While I'm here, clean up the sysctls, and make them dynamic.
Reviewed by: des
Tested on Alpha by: obrien
Zsh users can add the following to their .zshrc for sysctl completion:
function listsysctls {
case $1 in
*.*) set -A reply $(sysctl -AN ${1%.*}) ;;
*) set -A reply $(sysctl -AN) ;;
esac
}
compctl -K listsysctls sysctl
While I'm here, brucify the getopt() switch.
This makes "mkdir /nonexistant/foo" complain that /nonexistant
doesn't exist rather than /nonexistant/foo which doesn't make much
sense.
Submitted (in a different form) by: W.H.Scholten <whs@xs4all.nl>
implement memory fences for the 486+. The 386 still uses versions w/o
memory fences as all operations on the 386 are not program ordered.
The 386 versions are not MP safe.
it at boot time closer to the way we want it to be in the final version.
* Move the default directory to /var/db/entropy
* Run the entropy saving cron job every 11 minutes. This seems
to be a better default, although still bikeshed material.
* Feed /dev/random some cheesy "entropy" from various commands
and files before the disks are mounted. This gives /dev/random
a better chance of running without blocking early.
* Move the reseeding with previously stored entropy to the point
immediately after the disks are mounted.
* Make the harvesting script a little safer in regards to the
possibility of accidentally overwriting something other
than a regular file.
not yet been caught), don't save the config with a null drive
name (which causes the drive to be renamed "plex" on the next
start), put in the text "*invalid*" instead.
This is damage control, not a fix.
Experienced by: peter
Break some long format strings so that they fit in style(9)-sized
lines.
Remove some "outdentation".
