Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.
For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.
Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.
NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.
If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
instead of a linear array.
The multicast memberships for the inpcb structure are protected by a
non-sleepable lock, INP_WLOCK(), which needs to be dropped when
calling the underlying possibly sleeping if_ioctl() method. When using
a linear array to keep track of multicast memberships, the computed
memory location of the multicast filter may suddenly change, due to
concurrent insertion or removal of elements in the linear array. This
in turn leads to various invalid memory access issues and kernel
panics.
To avoid this problem, put all multicast memberships on a STAILQ based
list. Then the memory location of the IPv4 and IPv6 multicast filters
become fixed during their lifetime and use after free and memory leak
issues are easier to track, for example by: vmstat -m | grep multi
All list manipulation has been factored into inline functions
including some macros, to easily allow for a future hash-list
implementation, if needed.
This patch has been tested by pho@ .
Differential Revision: https://reviews.freebsd.org/D20080
Reviewed by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Perform ifp mismatch checks (to determine if a send tag is allocated
for a different ifp than the one the packet is being output on), in
ip_output() and ip6_output(). This avoids sending packets with send
tags to ifnet drivers that don't support send tags.
Since we are now checking for ifp mismatches before invoking
if_output, we can now try to allocate a new tag before invoking
if_output sending the original packet on the new tag if allocation
succeeds.
To avoid code duplication for the fragment and unfragmented cases,
add ip_output_send() and ip6_output_send() as wrappers around
if_output and nd6_output_ifp, respectively. All of the logic for
setting send tags and dealing with send tag-related errors is done
in these wrapper functions.
For pseudo interfaces that wrap other network interfaces (vlan and
lagg), wrapper send tags are now allocated so that ip*_output see
the wrapper ifp as the ifp in the send tag. The if_transmit
routines rewrite the send tags after performing an ifp mismatch
check. If an ifp mismatch is detected, the transmit routines fail
with EAGAIN.
- To provide clearer life cycle management of send tags, especially
in the presence of vlan and lagg wrapper tags, add a reference count
to send tags managed via m_snd_tag_ref() and m_snd_tag_rele().
Provide a helper function (m_snd_tag_init()) for use by drivers
supporting send tags. m_snd_tag_init() takes care of the if_ref
on the ifp meaning that code alloating send tags via if_snd_tag_alloc
no longer has to manage that manually. Similarly, m_snd_tag_rele
drops the refcount on the ifp after invoking if_snd_tag_free when
the last reference to a send tag is dropped.
This also closes use after free races if there are pending packets in
driver tx rings after the socket is closed (e.g. from tcpdrop).
In order for m_free to work reliably, add a new CSUM_SND_TAG flag in
csum_flags to indicate 'snd_tag' is set (rather than 'rcvif').
Drivers now also check this flag instead of checking snd_tag against
NULL. This avoids false positive matches when a forwarded packet
has a non-NULL rcvif that was treated as a send tag.
- cxgbe was relying on snd_tag_free being called when the inp was
detached so that it could kick the firmware to flush any pending
work on the flow. This is because the driver doesn't require ACK
messages from the firmware for every request, but instead does a
kind of manual interrupt coalescing by only setting a flag to
request a completion on a subset of requests. If all of the
in-flight requests don't have the flag when the tag is detached from
the inp, the flow might never return the credits. The current
snd_tag_free command issues a flush command to force the credits to
return. However, the credit return is what also frees the mbufs,
and since those mbufs now hold references on the tag, this meant
that snd_tag_free would never be called.
To fix, explicitly drop the mbuf's reference on the snd tag when the
mbuf is queued in the firmware work queue. This means that once the
inp's reference on the tag goes away and all in-flight mbufs have
been queued to the firmware, tag's refcount will drop to zero and
snd_tag_free will kick in and send the flush request. Note that we
need to avoid doing this in the middle of ethofld_tx(), so the
driver grabs a temporary reference on the tag around that loop to
defer the free to the end of the function in case it sends the last
mbuf to the queue after the inp has dropped its reference on the
tag.
- mlx5 preallocates send tags and was using the ifp pointer even when
the send tag wasn't in use. Explicitly use the ifp from other data
structures instead.
- Sprinkle some assertions in various places to assert that received
packets don't have a send tag, and that other places that overwrite
rcvif (e.g. 802.11 transmit) don't clobber a send tag pointer.
Reviewed by: gallatin, hselasky, rgrimes, ae
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20117
since r286195.
Do not forget results of route lookup and initialize rt and ifp pointers.
PR: 238098
Submitted by: Masse Nicolas <nicolas.masse at stormshield eu>
MFC after: 1 week
Currently rinit1() and its IPv6 counterpart
nd6_prefix_onlink_rtrequest() uses dummy null_sdl gateway address
during route insertion and change it afterwards. This behaviour
brings complications to the routing stack and the users of its
upcoming notification system.
This change fixes both rinit1() and nd6_prefix_onlink_rtrequest()
by filling in proper gateway in the beginning. It does not change any
of the userland notifications as in both cases, they happen after
the insertion and fixup process (rt_newaddrmsg_fib() and nd6_rtmsg()).
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20328
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
in RFC 4620, ICMPv6 Node Information Queries. A vnet jail with an
IPv6 address sent a hostname of the host environment, not the
jail, even if another hostname was set to the jail.
This change can be tested by the following commands:
# ifconfig epair0 create
# jail -c -n j1 vnet host.hostname=vnetjail path=/ persist
# ifconfig epair0b vnet j1
# ifconfig epair0a inet6 -ifdisabled auto_linklocal up
# jexec j1 ifconfig epair0b inet6 -ifdisabled auto_linklocal up
# ping6 -w ff02::1%epair0a
Differential Revision: https://reviews.freebsd.org/D20207
MFC after: 1 week
r333175 converted the global multicast lock to a sleepable sx lock,
so the lock order with respect to the (non-sleepable) inp lock changed.
To handle this, r333175 and r333505 added code to drop the inp lock,
but this opened races that could leave multicast group description
structures in an inconsistent state. This change fixes the problem by
simply acquiring the global lock sooner. Along the way, this fixes
some LORs and bogus error handling introduced in r333175, and commits
some related cleanup.
Reported by: syzbot+ba7c4943547e0604faca@syzkaller.appspotmail.com
Reported by: syzbot+1b803796ab94d11a46f9@syzkaller.appspotmail.com
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20070
This uses m_dup_pkthdr() to copy all of the metadata about a packet to
each of its fragments including VLAN tags, mbuf tags, etc. instead of
hand-copying a few fields.
Reviewed by: bz
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20117
Drivers can now pass up numa domain information via the
mbuf numa domain field. This information is then used
by TCP syncache_socket() to associate that information
with the inpcb. The domain information is then fed back
into transmitted mbufs in ip{6}_output(). This mechanism
is nearly identical to what is done to track RSS hash values
in the inp_flowid.
Follow on changes will use this information for lacp egress
port selection, binding TCP pacers to the appropriate NUMA
domain, etc.
Reviewed by: markj, kib, slavash, bz, scottl, jtl, tuexen
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20028
This GRE-in-UDP encapsulation allows the UDP source port field to be
used as an entropy field for load-balancing of GRE traffic in transit
networks. Also most of multiqueue network cards are able distribute
incoming UDP datagrams to different NIC queues, while very little are
able do this for GRE packets.
When an administrator enables UDP encapsulation with command
`ifconfig gre0 udpencap`, the driver creates kernel socket, that binds
to tunnel source address and after udp_set_kernel_tunneling() starts
receiving of all UDP packets destined to 4754 port. Each kernel socket
maintains list of tunnels with different destination addresses. Thus
when several tunnels use the same source address, they all handled by
single socket. The IP[V6]_BINDANY socket option is used to be able bind
socket to source address even if it is not yet available in the system.
This may happen on system boot, when gre(4) interface is created before
source address become available. The encapsulation and sending of packets
is done directly from gre(4) into ip[6]_output() without using sockets.
Reviewed by: eugen
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19921
If kern.random.initial_seeding.bypass_before_seeding is disabled, random(4)
and arc4random(9) will block indefinitely until enough entropy is available
to initially seed Fortuna.
It seems that zero flowids are perfectly valid, so avoid blocking on random
until initial seeding takes place.
Discussed with: bz (earlier revision)
Reviewed by: thj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20011
RFC 4391 specifies that the IB interface GID should be re-used as IPv6
link-local address. Since the code in in6_get_hw_ifid() ignored
IFT_INFINIBAND case, ibX interfaces ended up with the local address
borrowed from some other interface, which is non-compliant.
Use lowest eight bytes from GID for filling the link-local address,
same as Linux.
Reviewed by: bz (previous version), ae, hselasky, slavash,
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20006
fragmented packets.
When sending IPv4 and IPv6 fragmented packets and a fragment is lost,
the mbuf making up the fragment will remain in the temporary hashed
fragment list for a while. If the network interface departs before the
so-called slow timeout clears the packet, the fragment causes a panic
when the timeout kicks in due to accessing a freed network interface
structure.
Make sure that when a network device is departing, all hashed IPv4 and
IPv6 fragments belonging to it, get freed.
Backtrace:
panic()
icmp6_reflect()
hlim = ND_IFINFO(m->m_pkthdr.rcvif)->chlim;
^^^^ rcvif->if_afdata[AF_INET6] is NULL.
icmp6_error()
frag6_freef()
frag6_slowtimo()
pfslowtimo()
softclock_call_cc()
softclock()
ithread_loop()
Differential Revision: https://reviews.freebsd.org/D19622
Reviewed by: bz (network), adrian
MFC after: 1 week
Sponsored by: Mellanox Technologies
IPPROTO_IPV6 level socket option IPV6_CHECKSUM enabled and the
checksum check fails, drop the message. Without this fix, an
ICMP6 message was sent indicating a parameter problem.
Thanks to bz@ for suggesting a way to simplify this fix.
Reviewed by: bz@
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19969
is requested by the application using the IPPROTO_IPV6 level socket option
IPV6_CHECKSUM on a raw socket, ensure that the packet contains enough
bytes to contain the checksum at the specified offset.
Reported by: syzbot+6295fcc5a8aced81d599@syzkaller.appspotmail.com
Reviewed by: bz@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19968
as requested by the user via the IPPROTO_IPV6 level socket option
IPV6_CHECKSUM. The check if there are enough bytes in the packet to
store the checksum at the requested offset was wrong by 1.
Reviewed by: bz@
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19967
When using the IPPROTO_IPV6 level socket option IPV6_CHECKSUM on a raw
IPv6 socket, ensure that the value is either -1 or a non-negative even
number.
Reviewed by: bz@, thj@
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19966
Add a stat counter to track ipv6 atomic fragments. Atomic fragments can be
generated in response to invalid path MTU values, but are also a potential
attack vector and considered harmful (see RFC6946 and RFC8021).
While here add tracking of the atomic fragment counter to netstat and systat.
Reviewed by: tuexen, jtl, bz
Approved by: jtl (mentor), bz (mentor)
Event: Aberdeen hackathon 2019
Differential Revision: https://reviews.freebsd.org/D17511
When leaving a multicast group, a hole may be created in the inpcb's
source filter and group membership arrays. To remove the hole, the
succeeding array elements are copied over by one entry. The multicast
code expects that a newly allocated array element is initialized, but
the code which shifts a tail of the array was leaving stale data
in the final entry. Fix this by explicitly reinitializing the last
entry following such a copy.
Reported by: syzbot+f8c3c564ee21d650475e@syzkaller.appspotmail.com
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19872
stf(4) interfaces are not multicast-capable so they can't perform DAD.
They also did not set IFF_DRV_RUNNING when an address was assigned, so
the logic in nd6_timer() would periodically flag such an address as
tentative, resulting in interface flapping.
Fix the problem by setting IFF_DRV_RUNNING when an address is assigned,
and do some related cleanup:
- In in6if_do_dad(), remove a redundant check for !UP || !RUNNING.
There is only one caller in the tree, and it only looks at whether
the return value is non-zero.
- Have in6if_do_dad() return false if the interface is not
multicast-capable.
- Set ND6_IFF_NO_DAD when an address is assigned to an stf(4) interface
and the interface goes UP as a result. Note that this is not
sufficient to fix the problem because the new address is marked as
tentative and DAD is started before in6_ifattach() is called.
However, setting no_dad is formally correct.
- Change nd6_timer() to not flag addresses as tentative if no_dad is
set.
This is based on a patch from Viktor Dukhovni.
Reported by: Viktor Dukhovni <ietf-dane@dukhovni.org>
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19751
Update NAT64LSN implementation:
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.
# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in
Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.
Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.
Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
When we roam between networks and our link-state goes down, automatically remove
the IPv6-Only flag from the interface. Otherwise we might switch from an
IPv6-only to and IPv4-only network and the flag would stay and we would prevent
IPv4 from working.
While the actual function call to clear the flag is under EXPERIMENTAL,
the eventhandler is not as we might want to re-use it for other
functionality on link-down event (such was re-calculate default routers
for example if there is more than one).
Reviewed by: hrs
Differential Revision: https://reviews.freebsd.org/D19487
All changes are hidden behind the EXPERIMENTAL option and are not compiled
in by default.
Add ND6_IFF_IPV6_ONLY_MANUAL to be able to set the interface into no-IPv4-mode
manually without router advertisement options. This will allow developers to
test software for the appropriate behaviour even on dual-stack networks or
IPv6-Only networks without the option being set in RA messages.
Update ifconfig to allow setting and displaying the flag.
Update the checks for the filters to check for either the automatic or the manual
flag to be set. Add REVARP to the list of filtered IPv4-related protocols and add
an input filter similar to the output filter.
Add a check, when receiving the IPv6-Only RA flag to see if the receiving
interface has any IPv4 configured. If it does, ignore the IPv6-Only flag.
Add a per-VNET global sysctl, which is on by default, to not process the automatic
RA IPv6-Only flag. This way an administrator (if this is compiled in) has control
over the behaviour in case the node still relies on IPv4.
When dropping a fragment queue, account for the number of fragments in the
queue. This improves accounting between the number of fragments received and
the number of fragments dropped.
Reviewed by: jtl, bz, transport
Approved by: jtl (mentor), bz (mentor)
Differential Revision: https://review.freebsd.org/D17521
The KPI have been reviewed and cleansed of features that were planned
back 20 years ago and never implemented. The pfil(9) internals have
been made opaque to protocols with only returned types and function
declarations exposed. The KPI is made more strict, but at the same time
more extensible, as kernel uses same command structures that userland
ioctl uses.
In nutshell [KA]PI is about declaring filtering points, declaring
filters and linking and unlinking them together.
New [KA]PI makes it possible to reconfigure pfil(9) configuration:
change order of hooks, rehook filter from one filtering point to a
different one, disconnect a hook on output leaving it on input only,
prepend/append a filter to existing list of filters.
Now it possible for a single packet filter to provide multiple rulesets
that may be linked to different points. Think of per-interface ACLs in
Cisco or Juniper. None of existing packet filters yet support that,
however limited usage is already possible, e.g. default ruleset can
be moved to single interface, as soon as interface would pride their
filtering points.
Another future feature is possiblity to create pfil heads, that provide
not an mbuf pointer but just a memory pointer with length. That would
allow filtering at very early stages of a packet lifecycle, e.g. when
packet has just been received by a NIC and no mbuf was yet allocated.
Differential Revision: https://reviews.freebsd.org/D18951
connectivity.
Looking at past changes in this area like r337866, some refcounting
bugs have been introduced, one by one. For example like calling
in6m_disconnect() and in6m_rele_locked() in mld_v1_process_group_timer()
where previously no disconnect nor refcount decrement was done.
Calling in6m_disconnect() when it shouldn't causes IPv6 solitation to no
longer work, because all the multicast addresses receiving the solitation
messages are now deleted from the network interface.
This patch reverts some recent changes while improving the MLD
refcounting and concurrency model after the MLD code was converted
to using EPOCH(9).
List changes:
- All CK_STAILQ_FOREACH() macros are now properly enclosed into
EPOCH(9) sections. This simplifies assertion of locking inside
in6m_ifmultiaddr_get_inm().
- Corrected bad use of in6m_disconnect() leading to loss of IPv6
connectivity for MLD v1.
- Factored out checks for valid inm structure into
in6m_ifmultiaddr_get_inm().
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
because the destructor will access the if_ioctl() callback in the ifnet
pointer which is about to be freed. This prevents use-after-free.
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
After the afdata read lock was converted to epoch(9), readers could
observe a linked LLE and block on the LLE while a thread was
unlinking the LLE. The writer would then release the lock and schedule
the LLE for deferred free, allowing readers to continue and potentially
schedule the LLE timer. By the point the timer fires, the structure is
freed, typically resulting in a crash in the callout subsystem.
Fix the problem by modifying the lookup path to check for the LLE_LINKED
flag upon acquiring the LLE lock. If it's not set, the lookup fails.
PR: 234296
Reviewed by: bz
Tested by: sbruno, Victor <chernov_victor@list.ru>,
Mike Andrews <mandrews@bit0.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18906
The loopback interface can only receive packets with a single scope ID,
namely the scope ID of the loopback interface itself. To mitigate this
packets which use the scope ID are appearing as received by the real
network interface, see "origifp" in the patch. The current code would
drop packets which are designated for loopback which use a link-local
scope ID in the destination address or source address, because they
won't match the lo0's scope ID. To fix this restore the network
interface pointer from the scope ID in the destination address for
the problematic cases. See comments added in patch for a more detailed
description.
This issue was introduced with route caching (ae@).
Reviewed by: bz (network)
Differential Revision: https://reviews.freebsd.org/D18769
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
Memory beyond that limit was previously unused, wasting roughly 1MB per
8GB of RAM. Also retire INP_PCBLBGROUP_PORTHASH, which was identical to
INP_PCBPORTHASH.
Reviewed by: glebius
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17803
Various network protocol sysctl handlers were not zero-filling their
output buffers and thus would export uninitialized stack memory to
userland. Fix a number of such handlers.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: tuexen
MFC after: 3 days
Security: kernel memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18301
Now an interface name can be specified for nptv6 instance instead of
ext_prefix. The module will track if_addr_ext events and when suitable
IPv6 address will be added to specified interface, it will be configured
as external prefix. When address disappears instance becomes unusable,
i.e. it doesn't match any packets.
Reviewed by: 0mp (manpages)
Tested by: Dries Michiels <driesm dot michiels gmail com>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17765
If another thread immediately removes the link-local address
added by in6_update_ifa(), in6ifa_ifpforlinklocal() can return NULL,
so the following assertion (or dereference) is wrong.
Remove the assertion, and handle NULL somewhat better than panicking.
This matches all of the other callers of in6_update_ifa().
PR: 219250
Reviewed by: bz, dab (both an earlier version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17898
