Commit Graph

4297 Commits

Author SHA1 Message Date
Andrey A. Chernov
f9641ac41e Implement ANSI E[39m and E[49m to set fg and bg to initial (not to default!)
values. E[x is bad because set them to default values and should be used only
in reset sequence.
2000-06-05 22:16:11 +00:00
Bill Paul
b6a1416d3a Don't bother checking the link state in dcphy_status() if the interface
isn't up.
2000-06-05 19:37:15 +00:00
Greg Lehey
f68de48880 parity ops: Correctly recognize the end of the plex. Previously we
were running off the end and generating worrying but harmless messages
about parity errors that wouldn't go away.
2000-06-05 03:01:07 +00:00
Duncan Barclay
5c0bff264f Cosmetic and capture a register dump _before_ I've downloaded values to
the card.
2000-06-04 21:14:57 +00:00
Duncan Barclay
77d868ca7a As part of the IFF_RUNNING stuff, we've added an extra flag so callers
can request that runq routines should check IFF_RUNNING before executing.
2000-06-04 21:14:26 +00:00
Duncan Barclay
8544bea23f Main changes are resurection of mutlicast code (jgibbs moved the stuff I
needed to add into ether_input) and finally sorting IFF_RUNNING through
whole driver.

As part of the IFF_RUNNING stuff, we've added an extra flag so callers
can request that runq routines should check IFF_RUNNING before executing.

Remove BPF taps as this is now done by ether_input.

Resurrect multicast code, moving the multicast list stuff to the runq
routine.

Dump ray_promisc_user as all flag changes are now handled by ray_init, and
add a couple of checks to ray_promisc.

In uppparams_user, allow changes before the card is running (need to
fix some breakage with _download here later). In addition, don't
assume that the current n/w parameters are valid - they are only valid
in the runq.

Fix a nasty flag bug - runq_add cleared all the flags on the last command!

Remove the hacks for setting the memory flags - problems were down
to buggy versions of pccardd. For some reason pccardd only dtrt with
the "right" debug_level.
2000-06-04 17:51:36 +00:00
Greg Lehey
b441812ca5 parityrebuild: write the parity block back to the correct subdisk.
HEADS UP: This fixes a serious data corruption bug when using the
userland command 'rebuildparity'.
2000-06-02 04:05:40 +00:00
Greg Lehey
cad166c211 Remove an incorrect comment, adjust white space. 2000-06-02 04:05:05 +00:00
Greg Lehey
fbbcd2e09c Add 'dumpconfig' keyword. 2000-06-02 04:04:31 +00:00
Greg Lehey
762166daca Remove a redundant statement. 2000-06-02 04:03:57 +00:00
Greg Lehey
c9180b28e7 open_drive: Recognize "wd" device type. This is going away, but it's
not gone yet.

format_config: print correct text when a volume has a preferred plex.
This is still broken, but not quite as badly.

Reported-by: Phil Regnauld <regnauld@ftf.net>

Change a rather silly comment.
2000-06-02 04:03:13 +00:00
Greg Lehey
d8c8f72dd9 give_sd_to_plex: Initialize sd->plexno correctly. Previously this was
only being done at plex creation time, and an attach would leave the
value uninitialized.
2000-06-02 04:02:15 +00:00
Bill Paul
7bc6fe296d Darn it... left if_aue.c out of the last commit. (Fix watchdog timeout
handling, turn of interrupt pipe stuff.)
2000-06-01 23:18:01 +00:00
Bill Paul
a2693d6d71 Handle watchdog timeouts better. We can't really call the foo_init()
routines from foo_watchdog() because foo_watchdog() is called at
interrupt context, and that's a no-no due to the way the USB stack
is currently set up.

What we do now is call the TX end of frame handler manually to clear
the completed transmission, then check the send queue and send off
any frames that are pending.

Also turned off the interrupt pipe stuff in if_aue, since it appears
to tickle a bug in the USB stack that I haven't found yet.
2000-06-01 23:16:42 +00:00
Poul-Henning Kamp
855e8bb9ad ed_ioctl() can be called from ifpromisc() after the card has been removed,
don't panic on a NULL pointer in that case.
2000-06-01 21:55:49 +00:00
Peter Wemm
3e0f102e57 With this evil hack the DS1 driver works on our Intel desktop
motherboards that use YMF740's.  It has a strange subvendor and subdevice
ID and requires a disturbingly long delay after the ac97 codec init.
Cameron hasn't had this driver tested on another 740 yet, so we don't know
if this is a quirk of all 740's, or if its just something about the codec
that Intel used.
2000-06-01 03:58:27 +00:00
Cameron Grant
17dbf67736 if a device has no play or no record channels, set its simplex flag. 2000-06-01 01:32:30 +00:00
Cameron Grant
e05327ee1b if we get bad values for playctrlsize, the firmware may not have initialised
yet so retry.
2000-06-01 01:29:05 +00:00
Cameron Grant
2176a9588a add a bit more diagnostic info for the bus_dmamap_load failure case 2000-05-31 19:04:12 +00:00
Bill Paul
318b02fdb9 Rework the support for the internal autonegotiation on the 21143 and
workalike chips (Macronix 98713A/98715 and PNIC II). Timing is somewhat
critical: you need to bring the link as soon as possible after NWAY
is done, and the old one second polling interval was too long. Now
we poll every 10th of a second until NWAY completes (at which point
we return to the 1 second interval again to keep an eye on the link
state).

I tested all the other cards I had on hand to make sure I didn't bust
any of them and they seem to work (including the MII-based 21143 card).
This should fix some autoneg problems with DE500-BA cards and the
built-in 10/100 ethernet on some alpha systems.

(Now before anyone asks why I never noticed this before, the old code
worked just find with the Intel swich I used for testing back in NY.
Apparently not all switches are as picky about the timing.)
2000-05-31 05:40:53 +00:00
Cameron Grant
bd68ce8be9 yamaha ds1/ds1e pci sound driver - work in progress, mixer and playback only.
tested on ymf724f only.

conf/files entry is commented out, enable it manually to test this code and
let me know results.
2000-05-31 03:21:36 +00:00
Warner Losh
c373152ae6 Add support for the modem side of the 56k combo card.
Submitted by:	Duncan Barclay <dmlb@ragnet.demon.co.uk>
2000-05-30 05:42:57 +00:00
Guido van Rooij
bcc031b104 Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.
2000-05-29 19:58:10 +00:00
Doug Rabson
1536418a84 Brucify the pmap_enter_temporary() changes. 2000-05-29 19:21:01 +00:00
Andrey A. Chernov
b2f64c0141 Fix the TAB not cause scrolling when entered at the end of the last line.
It may cause misterious chars appearse in the middle of the scrolled lines.

The bug trigger: enter
grep P_32 /usr/include/*.h
command and see misterious "db.\" filename.
2000-05-29 18:35:13 +00:00
Jun Kuriyama
81c0587fa1 Add more ESS1869 PnP Sound Card PnPid.
Submitted by:	MIHIRA Yoshiro
PR:		kern/17349
2000-05-29 07:43:51 +00:00
Warner Losh
6a2b5130e3 Add ACTIONTECH #define for plug and play. Also add PnP support to NEWCARD
for this card.

Submitted by: Kazuya Kodama <kodama@rd.nacsis.ac.jp>
2000-05-29 02:44:33 +00:00
Duncan Barclay
66d7d8c631 Remove unused ioctl locking 2000-05-28 23:23:24 +00:00
Duncan Barclay
203e551839 Made RAY_COM_DUMP a real debug called RAY_DCOM
unsed ioctl locking
2000-05-28 23:11:47 +00:00
Duncan Barclay
9385b6d6d7 A bit of a messy monster.
Simple stuff
------------

	Split _download up so that the MIB settings are in their own functions.

	Made "tx completed but status is ..." a recoverable error

	Cut down verbosity of "unloaded" messages

	Moved ccs_free and com_runq from intr_ccs to ecf_done and runq_done
	to avoid embarasing mistakes and waits.

	Merged runq_add and runq_arr into one and called it runq_add

	Made RAY_COM_DUMP a real debug called RAY_DCOM

	Consistnet debugging around tsleeps.

	Use bus_activate_resource for attr/cm mapping, and set the flags
	correctly in the allocation routines (needs more hacks to
	sys/pccard/pcic.c)

	com_malloc is now seperated from the comq initialization. This was
	done whilst trying to set automatic variables for the comqs.

Harder Stuff
------------

	As part of the IFF_RUNNING fixes, remove the panic in runq if we are
	not running.

	Change, again, runq_add. This time we don't do any cleaning up
	if there were errors. This is so that callers get the chance
	to re-try (not that I ever see it being used).

	In runq_add, only sleep when there is something to sleep on!

	ioctl locking routines, stolen from awi.c but not used


Hardest Stuff
-------------

	Dealing with serialing ioctls correctly means that we must QUEUE
	changes to IFF_RUNNING and check it in the QUEUED commands, not
	in the user commands. Whilst simple to state, it took a few
	hours of head scratching to get it right. The realisation was that
	I only have to guarantee that sub-commands from a single process
	are serialised and "atomic", and that they check the status of the
	interface flags when invoked and not when they are queued.

	Another way of looking at it, is that the driver's state is stored
	in the runq and the IFF_RUNNING flag. These must be changed together.

	What this means practically, is that IFF_RUNNING is set after
	we have started/joined/associated with a network. And it is
	cleared by ray_stop via the runq so that unfinsished commands are
	not distrupted.

	I still have to fix up promisc, upp/repparams and mcast.

	Oh yeah, stop is essentially a noop in that it only
	changes IFF_RUNNING
2000-05-28 23:10:12 +00:00
Gerard Roudier
94d057fdf4 - Make the NVRAM debug code compile and work.
- Get rid of a fiew uselessly `long' variables
  and casts to `long'.
- Estimate the PCI clock for all chips, except
  C1010 for now (we should do that for each PCI BUS)
- Refine a couple of C1010 errata work-arounds.
- For now, make sure AIP generation is disabled
  for the C1010-66.
2000-05-28 17:49:18 +00:00
Peter Wemm
2ce54ad34d Oops, nearly forgot to commit this one. Use correct register names, or
this will not compile without COMPAT_OLDPCI.
2000-05-28 16:38:28 +00:00
Peter Wemm
30d1c11e3a Encapsulate the old PCI compatability support and APIs completely under
"options COMPAT_OLDPCI".  This option already existed, but now also tidies
up the declarations in #include <pci/pci*.h>.  It is amazing how much stuff
was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
Peter Wemm
86b0a953e2 Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/ 2000-05-28 16:13:43 +00:00
Peter Wemm
94278c74bb Use the correct name for the PCI command register (PCIR_COMMAND). Don't
use constant that used to be a variable in our (very) old pci code.
2000-05-28 16:06:56 +00:00
Peter Wemm
c48cc9ce1e Use the correct register names. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/ 2000-05-28 16:02:05 +00:00
Peter Wemm
3796d32b9c Warn that this as an oldpci device.. 2000-05-28 15:59:52 +00:00
Peter Wemm
403b9111fb Use correct register values. This one was in aic7xxx and advansys too. 2000-05-28 15:50:40 +00:00
Doug Rabson
31891bc2bd Add a new pmap entry point, pmap_enter_temporary() to be used during
dumps to create temporary page mappings. This replaces the use of CADDR1
which is fairly x86 specific.

Reviewed by: dillon
2000-05-28 15:49:55 +00:00
Peter Wemm
717f014e45 Use the correct register names. s/PCI_MAP_REG_START/PCIR_MAPS/ 2000-05-28 15:48:48 +00:00
Peter Wemm
9e5c01ffe6 Use the correct register names, not the FreeBSD 2.2 compatability ones. 2000-05-28 15:47:00 +00:00
Peter Wemm
4cbef178df Use the correct name for a mapping register, not the old FreeBSD 2.x
compatability name.
2000-05-28 15:15:14 +00:00
Peter Wemm
6a4c2576dc Mass update of isa drivers using compatability shims to use
COMPAT_ISA_DRIVER() so that we can get rid of the evil isa_compat.h table.
2000-05-28 13:40:48 +00:00
Andrey A. Chernov
2073104f87 Manipulate with AltGR Led (really CapsLock Led) only in K_XLATE mode, because
all other modes not set ALKED flag and it means that CapsLock always turned
off for them.
Real bug example is X11 which never turn on CapsLock with Russian keyboard.

PR:		18651
Submitted by:	"Mike E. Matsnev" <mike@po.cs.msu.su>
2000-05-28 12:43:24 +00:00
Søren Schmidt
724a60faf8 Cosmetics: dont say Unknown but Generic chipset in probe.. 2000-05-28 07:51:23 +00:00
Søren Schmidt
5158543d6a Fix alignment problem on the alpha reported by several parties. 2000-05-28 07:50:19 +00:00
David E. O'Brien
5415a4bd71 Use /sys/sys/*.h over /usr/include/sys.
No repsonce from:	Maintainer
2000-05-27 21:35:47 +00:00
Cameron Grant
94e3845ccd fix the return value of the SOUND_PCM_WRITE_CHANNELS ioctl
re-enable old pcm ioctls
2000-05-27 14:40:17 +00:00
Cameron Grant
d28089a10d move various fields from pcm_channel to snd_dbuf
improve chn_read code- don't stop/restart on overrun, just dump data

more error checking on ioctls
2000-05-26 21:55:13 +00:00
Cameron Grant
04553e63a5 if we have a codec init routine, fail the attach if init fails 2000-05-26 21:42:50 +00:00