- Reformat the entire man page
- Create a proper synopsis section
- Use itemized-lists to describe each flag, rather than paragraphs
- Cross-reference common flags to a 'general flags' sub-section with short
inline description of the flag
- Label 'general flags' sub-section
- Apply additional fixes suggested by wblock, brueffer, and bdrewery
- Update .Dd that got undone previously
- Change the order of the .Op Fl to be alphabetical
- Add the -i | -I interface flags to the description of 'interface
display mode'
- Fix missing parameters in man page
- Fix missing parameters in usage()
- Sync man page and usage()
MFC Note: stable/9 and stable/10 do not have -R, will need to be removed
when merged
CR: D58
Reviewed by: brueffer, bcr
Approved by: wblock (mentor)
MFC after: 7 days
Sponsored by: ScaleEngine Inc.
The directory hierarchy is created by an mtree file (BSD.usr.dist,
in the case of calendar(1)). An explicit "mkdir -p" in a program's
Makefile is redundant, and can mask a missing mtree entry.
This is not really a good test as the behaviour for /c is unspecified.
For the record, ksh93 returns:
$ printf "abc\n\cdef"
abc
ef$
Discussed with: Garret D'Amore (Illumos)
displays after a pause, use the difference in runtime divided by the
length of the pause as the percentage of CPU used instead of the value
calculated by the kernel. In addition, when determing if a process or
thread is idle or not, treat any process or thread that has used any
runtime or performed any context switches during the interval as busy.
Note that the percent CPU is calculated as a double and stored in an
array to avoid recalculating the value multiple times in the comparison
method used to sort processes in the CPU display.
Tested by: Jamie Landeg-Jones <jamie@dyslexicfish.net>
Reviewed by: emaste (earlier version)
MFC after: 1 week
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
problem with broken in-tree builds (which are used far more
pervasively than I'd known outside the tree). However, weird results
may now happen if at any point in the tree above you there happens to
be a directory that has subdirectory of share/mk, as unpredictable
results will follow. This was considered the lessor of the two evils,
at least for now. In the future this will be removed again when the
underlying issues are resolved.
- Increase WID_IF_DEFAULT() from 6 to 8 (the default for AF_INET6) because
we have interfaces with longer names than 6 chars like epairN{a,b}.
- Style fixes.
This is intended to help in diagnostics and debugging of NIC and stack
flowid support.
Eventually this will grow another column (RSS CPU ID) but
that currently isn't cached in the inpcb.
There's also no clean flowtype -> flowtype identifier string. This is
the mbuf M_HASHTYPE_* values for RSS.
Here's some example output:
adrian@adrian-hackbox:~/work/freebsd/head/src % netstat -Rn | more
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address flowid ftype
tcp4 0 0 10.11.1.65.22 10.11.1.64.12409 29041942 2
udp4 0 0 127.0.0.1.123 *.* 00000000 0
udp6 0 0 fe80::1%lo0.123 *.* 00000000 0
udp6 0 0 ::1.123 *.* 00000000 0
udp4 0 0 10.11.1.65.123 *.* 00000000 0
Tested:
* amd64 system w/ igb NIC; local driver changes to expose RSS flowid in if_igb.
flag to procstat.
- Add an -H flag to request information about threads rather than processes
when dumping statistics. Currently it is only used for -r to display
resource usage for individual threads instead of the entire process.
Reviewed by: kib (older version without -H)
MFC after: 1 month
Add support for different output formats:
1. The output file that was previously written is now called the raw format.
2. Add the vmdk output format to create VMDK images.
When the format is not given, the raw output format is assumed.
in SUBDIRS having tests added to it, which fails. Work around this by
checking to make sure tests exists before adding it to subdirs and
work to get the generated file fixed so we can rename Makefile.inc to
something else so it isn't automatically included by subdirs...
This first step is mostly to prevent the code from rotting even further
and to ensure these do not get wiped when fmake's code is removed from
the tree.
These tests are currently being skipped because they detect the underlying
make is not fmake and thus disable themselves -- and the reason is that
some of the tests fail, possibly due to legitimate bugs. Enabling them to
run against bmake will come separately.
Lastly, it would be ideal if these tests were fed upstream but they are
not ready for that yet. In the interim, just put them under usr.bin/bmake/
while we sort things out. The existence of a different unit-tests directory
within here makes me feel less guilty about this.
Change confirmed working with a clean amd64 build.
If a numeric argument is missing, zero should be assumed, for signed as well
as unsigned conversions.
This fixes the 'zero' regression tests.
r265592 erroneously reverted r244407.
The "bltin/bltin.h" wrappers do not support exit() and attempting
to call it will exit sh completely.
Note that errx() is acceptable but will always return with status 2.
Reported by: jilles (and the testing framework)
Fix by: jilles
Pointyhat: pfg
and MK_LLDB=no, so set those explicitly (now that we can do
that). Simplify tests for these variables as well, since we know they
will always be defined regardless of the phase of the build.
install it as fmake. This defaults to no. This should be viewed as the
first step towards evental migration of this historic code to ports
and removal from the tree.
If e_shnum or e_shstrndx are at least SHN_LORESERVE (0xff00) then an
escape value is used to indicate that the actual value is found in one
of section 0's fields.
Sponsored by: DARPA, AFRL
This actually completes r264743 so that width and precision
specifiers work properly with %n$. These keeps consistency
with ksh93 and zsh.
Requested by: jilles
Obtained from: Garrett D'Amore (Illumos)
MFC after: 4 days
sector granularity for both offset and length. Have all schemes
use mkimg_write() instead of mkimg_seek() followed by write(2).
Now that schemes don't use lseek(2) nor write(2) directly, it's
easier to support output formats other than raw disks.
instead of from /usr/share/mk.
I'm not sure that this will let buildworld complete on a system with
no installed src.opts.mk (make buildworld is still running), but the
tinderbox builds are all failing earlyon without this patch.
build world, so it is the only make we build or install. fmake is
still in the tree, but disconnected, and upgrades from older systems
that still have bmake has not been removed, but its state has not been
tested (it should work given how minimal the work to upgrade to bmake
is).
same events that tcpstat's tcps_rcvmemdrop counter counts.
- Rename tcps_rcvmemdrop to tcps_rcvreassfull and improve its
description in netstat(1) output.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
netstat has two options for printing multicast tables:
sysctl (the default one for live systems) and kvm-based one (for cores).
It looks like kvm-based one hasn't been working since it's been introduced
in r190012 due to absence of mfctablesize kernel symbol.
Check for all ipv4-multicast symbols being correctly resolved was introduced
in r259638 regardless of 'live' value leading to "No IPv4 MROUTING" error
message.
Reported by: Olivier Cochard-Labbé
MFC after: 1 week
- Introduce a separate usage() function.
- Don't use argv[0]. Directly name the application, as we do elsewhere.
- Don't prepend the application name.
- Don't print two newlines.
Add a new %n$ option to change the order of the parameters as
done in the ksh93 builtin printf (among others).
For example:
%printf '%2$1d %1$s\n' one 2 three 4
2 one
4 three
The feature was written by Garret D'Amore under a
BSD license for Nexenta/illumos.
Reference:
http://garrett.damore.org/2010/10/new-implementation-of-printf.html
PR: bin/152934
Obtained from: Illumos
MFC after: 2 weeks
For 10 years, the "DIALUP <tty>, <user>" message has required having a
hostname (-h) instead of not having a hostname; therefore, it is never
logged. Given that dialup is obsolete and this has not been fixed, remove
the log message.
Note that LOGALL, which is defined by default, logs a message for all
logins, including dialup logins.
For increased compatibility with GNU units: support a -v option which
produces more verbose output when spitting out the answer.
GNU -v does additional work in the version, information, and check output which
we do not (yet?) replicate.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
As per POSIX, the -exec ... {} + primary always returns true, but a non-zero
exit status causes find to return a non-zero exit status itself. GNU does
the same, and also for -execdir ... {} +.
It does not make much sense to return false from the primary only when the
child process happens to be run.
The behaviour for -exec/-execdir ... ; remains unchanged: the primary
returns true or false depending on the exit status, and find's exit status
is unaffected.
The units program is likely little used. It is even less likely that a script
will want the units program to print out its version number by passing -v.
GNU units uses -V for version and -v for verbosity.
Increase compatibility between these two versions (written by the same author)
by switching our flag as well.
Take this opportunity to remove bogus information about the version number and
just call it 'FreeBSD units'.
Discussed with: cperciva, rwatson
fts_read() leaves errno unchanged on EOF and sets it on error, so set errno
to 0 before calling it. Also, don't trust finish_execplus() to leave errno
unchanged.
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
This is useful for debugging compat modules.
Sponsored by: EMC / Isilon Storage Division
Obtained from: Isilon OneFS (based on work by Jeff Hughes)
MFC after: 2 weeks
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
well over 8 years...
roll the clock forward 16 years since there have been other changes
deserving of a bump, but never happened..
Submitted by: feld
Obtained from: 1 week
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
- Retire long time unused (basically always unused) sys__umtx_lock()
and sys__umtx_unlock() syscalls
- struct umtx and their supporting definitions
- UMUTEX_ERROR_CHECK flag
- Retire UMTX_OP_LOCK/UMTX_OP_UNLOCK from _umtx_op() syscall
__FreeBSD_version is not bumped yet because it is expected that further
breakages to the umtx interface will follow up in the next days.
However there will be a final bump when necessary.
Sponsored by: EMC / Isilon storage division
Reviewed by: jhb
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
copied to userspace. Failing to do this would result in entries at the bottom
of the ktrdump output to be more recent than entries at the top.
With this change the timestamps are monotonically decreasing going from the
top to the bottom of the ktrdump output.
KTR buffer.
This happens when 'i' tries to wrap around from 0 to 'entries - 1'. Since 'i'
is a signed integer the modulo operation actually returns a negative number.
Fix this by computing the next index to use "by hand" instead of relying
on the modulo operator.
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.
Discussed with: melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
In certain situations when creating an authorized_key file on a Linux machine
restorecon(1) may need to be called. Therefore, attempt to run it if it exists.
MFC After: 1 week
Idea from: https://bugzilla.redhat.com/show_bug.cgi?id=739989
To help avoid confusion: when attempting to send a key file check to see if a
file of the same name exists with a '.pub' suffix and send that instead. This
mimics the behavior of other ssh-copy-id scripts.
Add -v passthrough.
Reported by: dweimer <dweimer@dweimer.net>
Reported by: feld
MFC After: 1 week
Highlights include (upstream revs in parens):
- Improvements to the remote GDB protocol client
(r196610, r197579, r197857, r200072, and others)
- Bug fixes for big-endian targets
(r196808)
- Initial support for libdispatch (GCD) queues in the debuggee
(r197190)
- Add "step-avoid-libraries" setting
(r199943)
- IO subsystem improvements (including initial work on a curses gui)
(r200263)
- Support hardware watchpoints on FreeBSD
(r201706)
- Improved unwinding through hand-written assembly functions
(r201839)
- Handle DW_TAG_unspecified_parameters for variadic functions
(r202061)
- Fix Ctrl+C interrupting a running inferior process
(r202086, r202154)
- Various bug fixes for memory leaks, LLDB segfaults, the C++ demangler,
ELF core files, DWARF debug info, and others.
Sponsored by: DARPA, AFRL
is no iSER support in ctld and/or kernel; should the user make that mistake,
the output from "iscsictl -L" is enough to determine what the problem is.
Sponsored by: The FreeBSD Foundation
items), so it is more obvious that we aren't going to indirect through
a NULL pointer.
PR: 144723
Submitted by: Garrett Cooper <yaneurabeya at gmail.com>
Obtained from: NetBSD r1.19
MFC after: 2 weeks
Highlights:
* Security fix for apache server plugin that we don't build or use
* sqlite performance improvements.
* bug fixes for edge cases and some other less common operations.
This commit largely restores the lldb source to the upstream r196259
snapshot with the addition of threaded inferior support and a few bug
fixes.
Specific upstream lldb revisions restored include:
SVN git
181387 779e6ac
181703 7bef4e2
182099 b31044e
182650 f2dcf35
182683 0d91b80
183862 15c1774
183929 99447a6
184177 0b2934b
184948 4dc3761
184954 007e7bc
186990 eebd175
Sponsored by: DARPA, AFRL
When the user supplies an invalid number of days provide a useful error message
instead of segfaulting.
PR: bin/186697
Reported by: kaltheat <kaltheat@gmail.com>
Submitted by: oliver <oliver@beefrankly.org> (older version)
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
- Note that kernel options are required
- Shift parameters around in SYNOPSIS to make it more clear that there are
different modes
- For all literal symbols such as 'process' or 'loginclass' or 'wallclock',
etc, make them into bold symbols with .Sy
- For each subject:subject-id:etc: use .Em to underline to make it more clear
they relate to the rule syntax
- Document how devd(8) support works
- Move RSS warning to BUGS and replace RSS with 'memoryuse' since 'RSS' is not
defined in the manpage
- Add more examples around listing existing rules
- Make rule syntax into a list to improve readability
- Add a list of subjects and their corresponding subject-id same as
RESOURCES/ACTIONS have lists
- Note that rctl(8) takes affect on all current and future processes
- Note that amount can take human numbers
- Add reference to login.conf(5) in few places login class is mentioned
Reviewed by: trasz
Approved by: bapt (mentor)
MFC after: 1 week
patch supplied by Allan Jude <freebsd@allanjude.com>. Add xref to
pam_passwdqc(8), where that testing is now done.
PR: docs/184482
Submitted by: Ryan Gerstenkorn <ryan_gerstenkorn@fastmail.fm>
Reviewed by: jilles, eadler
MFC after: 3 days
insert flow entry. During the route lookup the critical section is
exited. It may happen, that after route lookup we will be executed
on an other CPU that already has such flowentry. Before this change
we simply freed the flowentry and returned to ip_output() with
failure.
Actually there is nothing wrong with using previously allocated
flow entry, updating it properly. Thus, make flowentry_insert()
return the new either old fle, and make use of it.
Count reuses as "collisions" and real inserts as "inserts".
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Some of the collisions that are occuring are due to flowtable lookups
that succeed but have an invalid lle - typically because the L2 adjacency
lookup hasn't completed. This would lead to a follow-up insert which
would then fail (ie, collision) and the code would fall through to doing
a slow-path L2/L3 lookup in the netinet/netinet6 code.
This patch simply aborts storing a new flowtable entry if the lle isn't
yet valid.
Whilst I'm here, add a new pcpu counter for the item so the number of
failures can be tracked separately from generic "collisions."
Reviewed by: glebius
MFC after: 10 days
Sponsored by: Netflix, Inc.
- ip_output() and ip_output6() simply call flowtable_lookup(),
passing mbuf and address family. That's the only code under
#ifdef FLOWTABLE in the protocols code now.
o Revamp statistics gathering and export.
- Remove hand made pcpu stats, and utilize counter(9).
- Snapshot of statistics is available via 'netstat -rs'.
- All sysctls are moved into net.flowtable namespace, since
spreading them over net.inet isn't correct.
o Properly separate at compile time INET and INET6 parts.
o General cleanup.
- Remove chain of multiple flowtables. We simply have one for
IPv4 and one for IPv6.
- Flowtables are allocated in flowtable.c, symbols are static.
- With proper argument to SYSINIT() we no longer need flowtable_ready.
- Hash salt doesn't need to be per-VNET.
- Removed rudimentary debugging, which use quite useless in dtrace era.
The runtime behavior of flowtable shouldn't be changed by this commit.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
report the actual number of RPCs issued, not the theoretical number
that would be issued if all caching was disabled.
Reviewed by: rmacklem
MFC after: 2 weeks
commit c1acf022c533c5ae27e0cd556977eafe3f5959eb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Jan 17 21:46:44 2014 +0000
Add an option WITHOUT_NCURSESW to suppress building and linking to
libncursesw. While wide character support it useful we'd like to
only need one ncurses library on embedded systems.
MFC after: 4 weeks
Sponsored by: DARPA, AFRL
propagate the buffer size to libc, which uses a 1 kB buffer by default,
negating any hypothetical benefit of increasing fetch(1)'s buffer size.
MFC after: 3 days
This avoids leaving stale entries in utmpx after the connection is closed on
an open login session. It also allows a clean way (SIGTERM) to forcibly
terminate a user's terminal session.
This does not affect the situation for "hung" processes after the connection
is closed. The foreground process group receives SIGHUP and the tty becomes
inaccessible.
Also replace all use of the obsolete signal() function with sigaction() (not
only the part where it is actually required: SIGHUP and SIGTERM must mask
the other as well when caught).
PR: misc/183495
Reviewed by: ed
killall confusing killall -INT with killall -I (interactive
confirmation) which resulted in the wrong signal (TERM)
being delivered to the process(s).
Discussed with: delphij
MFC after: 2 weeks
Do this by generating misc_helpers explicitly, without using the
ATF_TESTS_SH functionality.
While this script is technically an atf-sh test program, it is not intended
to be run as a test and therefore it mustn't end up in the Kyuafile. Using
ATF_TESTS_SH means that misc_helpers ended up registered in the Kyuafile
and then failed to run as a test.
The alternative would be to supply an explicit Kyuafile from this directory
that lists the known test files, but doing it the way described above will
be easier to maintain.
MFC after: 3 days
These files are required to get packages in ports to build against atf and
also to get a couple of currently-failing tests to pass.
I'm following the approach already used by the libusb pkg-config files
installed by the system regarding the location and the install rules.
MFC after: 5 days
