These can be used in place of the CTRn() macros which require n to match
the number of optional arguments.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34852
French national organization for standardization as "NF Z71‐300"
PR: 160227
Approved by: emaste
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D34886
Replace the old snd_bwnd field which was kept for compatibility with the
t_flags2 field from the tcpcb. This exposes in siftr logs interesting
things such as ECN, PLPMTUD, Accurate ECN and if first bytes are
complete.
Reviewed by: rscheff (transport), chengc_netapp.com, debdrup (manpages)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #73
Differential Revision: https://reviews.freebsd.org/D34672
It supports only the obsolete SMBv1 protocol, is known to be buggy, and
likely has security vulnerabilities. It will either be updated or
removed in the future, but for now at least describe the current state
in the man page.
PR: 263043
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Add three hooks to the livedump process: before, after, and for each
block of dumped data. This allows, for example, quiescing the system
before the dump begins or protecting data of interest to ensure its
consistency in the final output.
Reviewed by: markj, kib (previous version)
Reviewed by: debdrup (manpages)
Reviewed by: Pau Amma <pauamma@gundo.com> (manpages)
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34067
This dumper can instantiate and write the dump's contents to a
file-backed vnode.
Unlike existing disk or network dumpers, the vnode dumper should not be
invoked during a system panic, and therefore is not added to the global
dumper_configs list. Instead, the vnode dumper is constructed ad-hoc
when a live dump is requested using the new ioctl on /dev/mem. This is
similar in spirit to a kgdb session against the live system via
/dev/mem.
As described briefly in the mem(4) man page, live dumps are not
guaranteed to result in a usuable output file, but offer some debugging
value where forcefully panicing a system to dump its memory is not
desirable/feasible.
A future change to savecore(8) will add an option to save a live dump.
Reviewed by: markj, Pau Amma <pauamma@gundo.com> (manpages)
Discussed with: kib
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D33813
Add the missing .El which fixes the indentation of the memory range
definitions and operation. Add subsection headings to further clarify
this section. Do the same for the RETURN VALUES section, and mention
explicitly that MEM_EXTRACT_PADDR always returns zero.
Reviewed by: markj, 0mp, Pau Amma <pauamma@gundo.com>
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34574
When the unicode locales files where split off the non unicode locales
be_BY.ISO8859-5 and ca_IT.ISO8859-15 where non installed one due to
a typo, the other one was just missing its entry in the Makefile.
It was only notice a year later, by some postgres developpers as it was
breaking some of their tests.
Reported by: tmunro
Remove the trailing backslash from the last list item. This is a NOP and
never bothered anything because the next line was a blank line. Remove
it for correctness sake.
MFC after: 3 days
Note that a console typewriter device /dev/tty
and asynchronous communication interfaces /dev/tty[0-5]
first appeared in Version 1 AT&T UNIX.
Obtained from: OpenBSD
MFC after: 1 week
Been some time since 364fe18b8c when the URL was first in this file.
Update from svnweb to cgit for the URL listed at the end of this file.
In addition, update all URLs to HTTPS. Replace two URLs with links to
archive.org as the original URLs are no longer valid.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34730
Add man pages for rtw88 and rtw88fw. Install a copy of the firmware
license file and hook up the driver and firmware modules to the build.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Relnotes: yes
Historically 32-bit Linuxulator under amd64 emulated the real i386
behavior. Since 3d8dd983 the old i386 Linux world can't be used under
amd64 Linuxulator as it don't know anything about amd64 machine (which
is returned now by newuname() syscall). So, add a knob to allow to swith
the behavior and use i386 Linux binaries on amd64.
Set knob to the new behavior as I think this is common to the modern
Linux distros.
Reviewed by: Pau Amma (doc), emaste
Differential revision: https://reviews.freebsd.org/D34708
MFC after: 2 weeks
The man page said dynamic allocation was required, but struct stack
can be allocated in any way, including on the stack. Make this clear,
and explain how to initialize the struct.
While I'm here, stack_save does not require any lock.
Reviewed by: markj, Pau Amma <pauamma_gundo.com>
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34461
ISA sound cards (and ISA itself) are long obsolete. NYCBUG dmesgd has
no entries for any of these devices after 2005.
Add deprecation notices to device attach routines and man pages for:
snd_ad1816 Analog Devices AD1816 SoundPort
snd_ess Ensoniq ESS
snd_gusc Gravis UltraSound
snd_mss Microsoft Sound System
snd_sbc Creative Sound Blaster
Reviewed by: cy, mav
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34604
These drivers are broken and have been scheduled for removal since 2012.
They will finally be removed before FreeBSD 14.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
There's too many broken hardware out there that wrongly has the
ACPI_FADT_NO_VGA bit set. Ignore it unless running as a virtualized
guest, as then the expectation would be that the hypervisor does
provide correct ACPI tables.
Reviewed by: emaste, 0mp, eugen
MFC: 3 days
Sponsored by: Citrix Systems R&D
PR: 230172
Differential revision: https://reviews.freebsd.org/D34392
/usr/freebsd-dist is used used by various programs as the location for
FreeBSD distribution files. In-tree programs following this convention
are bsdinstall(8) and release(7).
Reviewed by: Pau Amma <pauamma@gundo.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34552
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
FreeBSD 14.0 is going to ship with a new implementation of the mixer(8)
command. Unfortunately, in order to support new features like mute, the
command-line interface of the new implementation is not backwards
compatible.
Update all the remaining documentation and scripts in the src tree
to use the new syntax.
While here, document in usbhidaction.1 that the mute functionality is
now supported.
Reviewed by: christos, debdrup, hselasky
Approved by: hselasky (src)
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
Differential Revision: https://reviews.freebsd.org/D34545
The security/520-pfdenied script only reports blocked packets from the
main ruleset or any blocklistd(8) anchor.
Add an option to periodic.conf(5) to make it possible to specify
additional anchors to report.
PR: 262446
Reviewed by: kp
In order to support various types of data stored in device
tree properties or ACPI _DSD packages, create a new enum so
the caller can specify the expected type of a property they
want to read, according to the binding. The bus logic will use
that information to process the underlying data.
For example in DT all integer properties are stored in BE format.
In order to get constant results across different platforms we
need to convert its endianness to match the host.
Another example are ACPI_TYPE_INTEGER properties stored
as uint64_t. Before this patch the ACPI logic would refuse
to read them if the provided buffer was smaller than 8 bytes.
Now this can be handled by using DEVICE_PROP_UINT32 type.
Modify the existing consumers of this API to reflect the changes
and update the man pages accordingly.
Reviewed by: mw
Obtained from: Semihalf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33457
