Add locking around access to bv_cnt which is currently being done unlocked
PR: 206224
Reviewed by: imp
Approved by: jhb
MFC after: 1 week
Sponsored by: Panasas, Inc.
Differential Revision: https://reviews.freebsd.org/D4931
* Use standard IPv6 SAS instead of rt->rt_ifa address.
* Make address lookup work for IPv6 LLA.
* Save address into buffer provided by caller instead of using static vars.
Discussed with: rmacklem
Add support for sparse files in ext4. Also implement read-ahead, which
greatly increases the performance when transferring files from ext4.
Both features implemented by Damjan Jovanovic.
PR: 205816
MFC after: 1 week
from int to int64.
MSDN says that SMB_SET_FILE_END_OF_FILE_INFO uses signed 64-bit integer
to specify offset, but since smbfs_smb_setfsize() has used plain int,
a value was truncated in case when offset was larger than 2G.
https://msdn.microsoft.com/en-us/library/ff469975.aspx
In particular, now `truncate -s 10G` will work correctly on the mounted
SMB share.
Reported and tested by: Eugene Grosbein <eugen at grosbein dot net>
MFC after: 1 week
unmount of devfs mounts, by restarting the failed syscall.
When restarted, failing syscalls eventually either stop finding the
node and returning ENOENT, or the vnode op vectors finally transition
to the deadfs vop. The later return EIO or other error, more
appropriate for the operation.
Submitted by: bde
Tested by: pho
MFC after: 3 weeks
lower vnode. Otherwise, reference to the lower vnode from the upper
one prevents final unlink.
PR: 178238
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
close and close due to revoke(2)-like operation.
A new FLASTCLOSE flag indicates that this is last close. FREVOKE is
set for revokes, and FNONBLOCK is also set, same as is already done
for VOP_CLOSE() call from vgonel().
The flags reuse user open(2) flags which are never stored in f_flag,
to not consume bit space in the ABI visible way. Assert this with the
static check.
Requested and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
With the new VOP_GETPAGES() KPI the "count" argument counts pages already,
and doesn't need to be translated from bytes to pages.
While here make it consistent that *rbehind and *rahead are updated only
if we doesn't return error.
Pointy hat to: glebius
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
like the various d_*_t typedefs since it declared a function pointer rather
than a function. Add a new d_priv_dtor_t typedef that declares the function
and can be used as a function prototype. The previous typedef wasn't
useful outside of the cdevpriv implementation, so retire it.
The name d_priv_dtor_t was chosen to be more consistent with cdev methods
since it is commonly used in place of d_close_t even though it is not a
direct pointer in struct cdevsw.
Reviewed by: kib, imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D4340
This leak was introduced by r291527.
Since the nfscommon.ko module is rarely unloaded, this leak would not
have been much of an issue.
MFC after: 2 weeks
option that will be added to the nfsuserd daemon in a future
commit. It modifies the cache used by NFSv4 for name<-->id
translation (both username/uid and group/gid) to support this.
When "-manage-gids" is set, the server looks up each uid
for the RPC and uses the list of groups cached in the server
instead of the list of groups provided in the RPC request.
The cached group list is acquired for the cache by the nfsuserd
daemon via getgrouplist(3).
This avoids the 16 groups limit for the list in the RPC request.
Since the cache is now used for every RPC when "-manage-gids"
is enabled, the code also modifies the cache to use a separate
mutex for each hash list instead of a single global mutex.
Suggested by: jpaetzel
Tested by: jpaetzel
MFC after: 2 weeks
the name of a filesystem when setting it as the first parameter to the
getnewvnode() function. Most filesystems call getnewvnode from just one
place so can use a literal string as the first parameter. However, NFS
calls getnewvnode from two places, so we create a global constant string
that can be used by the two instances. This change also collapses two
instances of getnewvnode() in the UFS filesystem to a single call.
Reviewed by: kib
Tested by: Peter Holm
(opens, locks, etc) is retained, which I believe is correct behaviour.
However, for NFSv4.1, the server also retained a reference to the xprt
(RPC transport socket structure) for the backchannel. This caused
svcpool_destroy() to not call SVC_DESTROY() for the xprt and allowed
a socket upcall to occur after the mutexes in the svcpool were destroyed,
causing a crash.
This patch fixes the code so that the backchannel xprt structure is
dereferenced just before svcpool_destroy() is called, so the code
does do an SVC_DESTROY() on the xprt, which shuts down the socket upcall.
Tested by: g_amanakis@yahoo.com
PR: 204340
MFC after: 2 weeks
At this time I cannot see a way to fix directory caching when it
has partial blocks in the buffer cache, due to the fact that the
syscall's uio_offset won't stay the same as the lblkno * NFS_DIRBLKSIZ
offset.
Reported by: bde
MFC after: 2 weeks
the largest size of buffer cache block or the mapping of the buffer
is bogus. When a mount with rsize=4096,wsize=4096 was done, f_iosize
would be set to 4096. This resulted in corrupted directory data, since
the buffer cache block size for directories is NFS_DIRBLKSIZ (8192).
This patch fixes the code so that it always sets f_iosize to at least
NFS_DIRBLKSIZ.
Tested by: krichy@cflinux.hu
PR: 177971
MFC after: 2 weeks
is non-zero.
- Include the process address in the PROC_ASSERT_HELD() and
PROC_ASSERT_NOT_HELD() assertion messages so that the corresponding
process can be found easily when debugging.
MFC after: 1 week
file descriptor opened for complimentary access exists as well.
The implementation of the guarantee is done by counting the
generations of readers and writers opens. We return success and not
EINTR or ERESTART error, when the sleep for complimentary opening is
interrupted, but the generation was changed during the sleep.
Longer explanation: assume there are two threads, A doing open("fifo",
O_RDONLY) and B doing open("fifo", O_WRONLY), and no other threads
either trying to open the fifo, nor there are any file descriptors
referencing the fifo. Before the change, it was possible e.g. for for
thread A to return a valid file descriptor, while thread B returned
EINTR if a signal to B was delivered simultaneously with the wakeup
from A. After the change, in this situation both A::open() and
B::open() succeed and the signal is made "as if" it was noticed
slightly later. Note that the signal actual delivery is not changed,
it is done by ast on syscall return path, so signal handler is still
executed before first instruction after syscall.
See PR for the code demonstrating the issue.
PR: 203162
Reported by: Victor Stinner victor.stinner@gmail.com
Reviewed by: jilles
Tested by: bapt, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
sign on every directory exported via NFSv4 with NFSv4 ACLs enabled.
Reviewed by: rmacklem@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3502
that already has a confirmed ClientID, the nfsrv_setclient() function would
not fill in the clientidp being returned. As such, the value of ClientID
returned would be whatever garbage was on the stack.
An NFSv4.1 client would not normally do this, but it appears that it can
happen for certain Linux clients. When it happens, the client persistently
retries the ExchangeID and Create_session after Create_session fails when
it uses the bogus clientid. With this patch, the correct clientid is replied.
This problem was identified in a packet trace supplied by
Ahmed Kamal via email.
Reported by: email.ahmedkamal@googlemail.com
MFC after: 2 weeks
mappings as if MAP_SHARED was always present since in general MAP_PRIVATE
is not permitted for character devices. However, there is one exception
in that MAP_PRIVATE mappings are permitted for /dev/zero.
Only require a writable file descriptor (FWRITE) for shared, writable
mappings of character devices. vm_mmap_cdev() will reject any private
mappings for other devices.
Reviewed by: kib
Reported by: sbruno (broke qemu cross-builds), peter
Differential Revision: https://reviews.freebsd.org/D3316
BROKEN NFS SERVER OR MIDDLEWARE: Certain WAN "accelerators" attempt to cache
NFS GETATTR traffic, but actually corrupt it (e.g., responding to requests
with attributes for totally different files).
Warn very verbosely when this is detected. Linux' NFS client has a similar
warning.
Adds a sysctl/tunable (vfs.nfs.fileid_maxwarnings) to configure the quantity
of warnings; default to 10. (Zero disables; -1 is unlimited.)
Adds a failpoint to aid in validating the warning / behavior with a
non-broken server. Use something like:
sysctl 'debug.fail_point.nfscl_force_fileid_warning=10%return(1)'
Reviewed by: rmacklem
Approved by: markj (mentor)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3304
unconfirmed clientid structure for the same client on the last hash list,
this old entry would not be removed/deleted. I do not think this bug would have
caused serious problems, since the new entry would have been before the old one
on the list. This old entry would have eventually been scavenged/removed.
Detected while reading the code looking for another bug.
MFC after: 3 days
determining whether a node changed.
Other filesystems, e.g., UFS, only check on seconds, when determining
whether something changed.
This also corrects the birthtime case, where we checked tv_nsec
twice, instead of tv_sec and tv_nsec (PR).
PR: 201284
Submitted by: David Binderman
Patch suggested by: kib
Reviewed by: kib
MFC after: 2 weeks
Committed from: Essen FreeBSD Hackathon
SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
This obviates the need for a MNTK_SUSPENDABLE flag, since passthrough
filesystems like nullfs and unionfs no longer need to inherit this
information from their lower layer(s). This change also restores the
pre-r273336 behaviour of using the presence of a susp_clean VFS method to
request suspension support.
Reviewed by: kib, mjg
Differential Revision: https://reviews.freebsd.org/D2937
the kernel would generate a bogus one with a ":/<path>" suffix.
This would only occur for the case where there was no explicit
"principal" argument and the getaddrinfo() call in mount_nfs.c failed to a
return a cannonical name for the server.
This patch fixes this unusual case.
PR: 201073
Submitted by: masato@itc.naist.jp
MFC after: 2 weeks
compared to the old NFS client via email to the freebsd-fs@ mailing list.
For the new client, when multiple clients attempted to create a symbolic
link concurrently, more that one client would report success instead of
EEXIST. This was caused by code in the new client that mapped EEXIST to
OK assuming it was caused by a retried RPC request.
Since the old client did not do this, the patch defaults to the old
behaviour and permits the new behaviour to be enabled via a sysctl.
Reported by: alex.burlyga.ietf@gmail.com
Tested by: alex.burlyga.ietf@gmail.com
MFC after: 2 weeks
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
dup entry, upon detach from the parent directory. If the node is
renamed, the entry is re-attached at the different directory, and
invalud cookie value triggers assert (or corrupts directory rb tree,
it seems).
Reported by: clusteradm (gjb, antoine)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
o Provide an extensive set of assertions for input array of pages.
o Remove now duplicate assertions from different pagers.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
in the requested array, then it is responsible for disposition of previous
page and is responsible for updating the entry in the requested array.
Now consumers of KPI do not need to re-lookup the pages after call to
vm_pager_get_pages().
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
- MNTK_SUSPENDABLE is set in mnt_kern_flag, not mnt_flag.
- The lower layer of a unionfs mount is read-only, so the mount should
be suspendable iff the upper layer is suspendable.
- Remove a couple of superfluous comments.
Differential Revision: https://reviews.freebsd.org/D2714
Reviewed by: kib, mjg
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
Merge the filesystem specific part from r274914 to ext2fs.
I only did regular testing with the change but UFS and our ext2fs
are similar enough that the code should just work with the new
sendfile.
Discussed with: glebius
No appreciable change in performance was observed after increasing
the sizes of these tables and then testing with a single client.
However, there was an email that indicated high CPU overheads for
a heavily loaded NFSv4 and it is hoped that increasing the sizes
of the hash tables via these tunables might help.
The tables remain the same size by default.
Differential Revision: https://reviews.freebsd.org/D2596
MFC after: 2 weeks
limits in the code which is deep in the call stack, and owns several
critical system resources, like vnode locks. Attempt to wait while
the per-mount softupdate thread cleans up the backlog may deadlock,
because the thread might need to lock the same vnode which is owned by
the waiting thread.
Instead of synchronously waiting for the worker, perform the worker'
tickle and pause until the backlog is cleaned, at the safe point
during return from kernel to usermode. A new ast request to call
softdep_ast_cleanup() is created, the SU code now only checks the size
of queue and schedules ast.
There is no ast delivery for the kernel threads, so they are exempted
from the mechanism, except NFS daemon threads. NFS server loop
explicitely checks for the request, and informs the schedule_cleanup()
that it is capable of handling the requests by the process P2_AST_SU
flag. This is needed because nfsd may be the sole cause of the SU
workqueue overflow. But, to not cause nsfd to spawn additional
threads just because we slow down existing workers, only tickle su
threads, without waiting for the backlog cleanup.
Reviewed by: jhb, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
so that it would not return less data than requested.
Since returning less directory data than requested is not a problem
for FreeBSD and even UFS no longer returns directory structures
with d_fileno == 0, this patch stops the client from doing this.
Although entries with d_fileno == 0 should not be a problem,
the man pages no longer document that these entries should be
ignored, so there was a concern that these entries might be an
issue in the future.
Suggested by: trasz
Tested by: trasz
MFC after: 2 weeks
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
tracing. This matches the behavior of ptrace(PT_ATTACH). Also,
the procfs detach request assumes p_oppid is always set.
Reviewed by: kib
MFC after: 2 weeks
that are not an exact multiple of DIRBLKSIZ correctly. Fortunately
readdir(3) always uses an exact multiple of DIRBLKSIZ, so few applications
were affected. This patch fixes this problem by reducing the size
of the directory read to an exact multiple of DIRBLKSIZ.
Tested by: trasz
Reported by: trasz
Reviewed by: trasz
MFC after: 2 weeks
Present implementation of large sync writes is too strict and so can be
quite slow. Instead of doing that, execute large async write in chunks,
syncing each chunk separately.
It would be good to fix large sync writes too, but I leave it to somebody
with more skills in this area.
Reviewed by: rmacklem
MFC after: 1 week
largest size for a buffer in the buffer cache. This patch
defines a new constant MAXBCACHEBUF, which is the largest
size for a buffer in the buffer cache. Having a separate
constant allows MAXBCACHEBUF to be set larger than MAXBSIZE
on a per-architecture basis, so that NFS can do larger read/writes
for these architectures. It modifies sys/param.h so that BKVASIZE
can also be set on a per-architecture basis.
A couple of cases where NFS used MAXBSIZE instead of NFS_MAXBSIZE
is fixed as well.
Differential Revision: https://reviews.freebsd.org/D2330
Reviewed by: mav, kib
MFC after: 2 weeks
This is similar to r281756 so set the ptr NULL after free as a safety belt
against future changes.
Obtained from: HardenedBSD (b2e77ced9ae213d358b44d98f552d9ae4636ecac)
Submitted by: Oliver Pinter
Revewed by: rmacklem
The htree directory index is a highly desirable feature for research
purposes and was meant to improve performance in our ext2/3 driver.
Unfortunately our implementation has two problems:
- It never really delivered any performance improvement.
- It appears to corrupt the filesystem in undetermined circumstances.
Strictly speaking dir_index is not required for read/write support in
ext2/3 and our limited ext4 support still works fine without it.
Regain stability in the ext2 driver by removing it. We may need it back
(fixed) if we want to support encrypted ext4 support but thanks to the
wonders of version control we can always revert this change and bring it
back.
PR: 191895
PR: 198731
PR: 199309
MFC after: 5 days
can perform better when using a 128K read/write data size.
This patch changes NFS_MAXDATA from 64K to 128K so that
clients can use 128K for NFS mounts to allow this.
The patch also renames NFS_MAXDATA to NFS_SRVMAXIO so
that it is clear that it applies to the NFS server side
only. It also avoids a name conflict with the NFS_MAXDATA
defined in rpcsvc/nfs_prot.h, that is used for userland RPC.
Tested by: mav
Reviewed by: mav
MFC after: 2 weeks
use VOP_FSYNC() to perform the NFS server's Commit operation.
This patch adds a mnt_kern_flag called MNTK_USES_BCACHE which
is set by file systems that use the buffer cache. If this flag
is not set, the NFS server always does a VOP_FSYNC().
This should be ok for old file system modules that do not set
MNTK_USES_BCACHE, since calling VOP_FSYNC() is correct, although
it might not be optimal for file systems that use the buffer cache.
Reviewed by: kib
MFC after: 2 weeks
For VREG vnodes, return the resident page count (multiplied by PAGE_SIZE)
for the tmpfs node's anonymous VM object that stores actual file contents.
For all other vnodes, return the tmpfs_node's tn_size, which should not
be rounded to a page.
This change allows using stat(2) to identify a sparse file on tmpfs.
Reviewed by: kib
MFC after: 1 week
on reads or writes, the time marks are used to display idle time by
w(1) [1]. Instead, use vfs.devfs.dotimes as the selector of default
precision vs. using time_second. The later gives seconds precision,
which is good enough for the purpose.
Note that timestamp updates are unlocked and the updates itself, as
well as the check in devfs_timestamp, are non-atomic.
Noted by: truckman [1]
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The magic number MSDOSFS_ARGSMAGIC, which used to distinguish
"old" vs "new" msdosfs mount arguments, has not been used since
2005; it should just go away now.
Likewise, the local-to-Unicode table that changed at the same
time is unused.
Leave the space reserved in the old style mount arguments, though,
since we still support the old mount call (via the cmount entry
point).
Submitted by: Chris Torek <chris.torek@gmail.com>
MFC after: 2 weeks
Currently we update timestamps unconditionally when doing read or
write operations. This may slow things down on hardware where
reading timestamps is expensive (e.g. HPET, because of the default
vfs.timestamp_precision setting is nanosecond now) with limited
benefit.
A new sysctl variable, vfs.devfs.dotimes is added, which can be
set to non-zero value when the old behavior is desirable.
Differential Revision: https://reviews.freebsd.org/D2104
Reported by: Mike Tancsa <mike sentex net>
Reviewed by: kib
Relnotes: yes
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
- Allow to call the function with vm object lock held.
- Allow to specify reqpage that doesn't match any page in the region,
meaning freeing all pages.
o Utilize the new function in couple more places in vnode pager.
Reviewed by: alc, kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
error cases. Calling brelse() with a NULL pointer is not allowed,
so only call brelse() when the bp is non-NULL.
Reported by: Maxime Villard (reported as uninitialized variable)
Do not ever return doomed vnode from lookup. This could happen, if
not checked, since dvp is relocked in the 'looking up ourselves' case.
In the other case, since dvp is relocked, mount point might go away
while fdesc_allocvp() is called. Prevent the situation by doing
vfs_busy() before unlocking dvp. Reuse the vn_vget_ino_gen() helper.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
prevent errors from yanking devices out from under filesystems. Only
care about special vnodes on devfs, special nodes on other kinds of
filesystems do not have special properties.
Sponsored by: EMC / Isilon Storage Division
Submitted by: Conrad Meyer
MFC after: 1 week
The e2fs_gd struct was not being initialized and garbage was
being used for hinting the ext2 allocator variant.
Use malloc to clear the values and also initialize e2fs_contigdirs
during allocation to keep consistency.
While here clean up small style issues.
Reported by: Clang static analyser
MFC after: 1 week
removed. Postponing it until tmpfs_getattr() is called causes
discordant values reported for file times vs. directory times.
Reported and tested by: madpilot
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
modification and last file status change timestamps of the file".
Currently, tmpfs only modifies ctime when file was extended. Since
r277828 followed tmpfs_write(), mmaped writes also do not modify
ctime.
Fix this, by updating both ctime and mtime for writes to tmpfs files.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
to UFS, perform updates during syncer scans, which in particular means
that tmpfs now performs scan on sync. Also, this means that a mtime
update may be delayed up to 30 seconds after the write.
The vm_object' OBJ_TMPFS_DIRTY flag for tmpfs swap object is similar
to the OBJ_MIGHTBEDIRTY flag for the vnode object, it indicates that
object could have been dirtied. Adapt fast page fault handler and
vm_object_set_writeable_dirty() to handle OBJ_TMPFS_NODE same as
OBJT_VNODE.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
in r277199. Acquire the neccessary reference in delist_dev_locked()
and inform destroy_devl() about it using CDP_UNREF_DTR flag.
Fix some style nits, add asserts.
Discussed with: hselasky
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
After the ext2 variant of the "orlov allocator" was implemented,
the case for a negative or zero dirsize disappeared.
Drop the dead code and unsign dirsize given that it can't be
negative anyways.
CID: 1008669
MFC after: 1 week
"delist_dev()" function. Make sure the character device structure
doesn't go away until the end of the "destroy_dev()" function due to
concurrently running cleanup code inside "devfs_populate()".
MFC after: 1 week
Reported by: dchagin@
function. Many existing clients don't understand POLLNVAL and instead
relies on an error code from the read(), write() or ioctl() system
call. Also make sure we wakeup any client pollers before the cuse
server is closing, so they don't wait forever for an event.
There are a number of msdosfs improvements in NetBSD that may be worth
bringing over, and this reduces noise in the comparison.
Differential Revision: https://reviews.freebsd.org/D1466
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
in the NFS server; garbage collect now-unused NFSMSIZ() and M_HASCL()
macros. Also garbage collect now-unused versions in headers for the
removed previous NFS client and server.
Reviewed by: rmacklem
Sponsored by: EMC / Isilon Storage Division
use VA_UTIMES_NULL to indicate whether it should
set the time to the current tod on the server.
This had the side effect of making the NFS client
use the client's timestamp for exclusive create,
starting with FreeBSD9.2.
Unfortunately a bug in some Solaris NFS servers
causes these servers to return NFS_OK to the
Setattr RPC done during exclusive create, but not
actually set the file's mode, leaving the file's
mode == 0.
This patch restores the NFS client's behaviour to
use the server's tod for the exclusive open's
Setattr RPC, to avoid the Solaris server bug and
to restore the pre-FreeBSD9.2 NFS behaviour.
Discussed on: freebsd-fs
PR: 186293
MFC after: 3 months
exactly the same code is at the end of the nfscl_checksattr()
function that is called just before it. As such, this code
had already been executed and didn't do anything.
MFC after: 1 week
was reported via email. This was caused by a LOR between the
sleep lock used to serialize the local locking (nfsrv_locklf())
and locking the vnode. I believe this patch fixes the problem
by delaying relocking of the vnode until the sleep lock is
unlocked (nfsrv_unlocklf()). To avoid nfsvno_advlock() having the side
effect of unlocking the vnode, unlocking the vnode was moved to before
the functions that call nfsvno_advlock().
It shouldn't affect the execution of the default case where
vfs.nfsd.enable_locallocks=0.
Reported by: loic.blot@unix-experience.fr
Discussed with: kib
MFC after: 1 week
which means that the NFSCLIENT and NFSSERVER
kernel options will no longer work. This commit
only removes the kernel components. Removal of
unused code in the user utilities will be done
later. This commit does not include an addition
to UPDATING, but that will be committed in a
few minutes.
Discussed on: freebsd-fs
This assertion was added in r246213 as a guard against corrupted mbufs
arriving from drivers, the key distinguishing factor of said mbufs being
that they had a negative length. Given we're in a while loop specifically
designed to skip over zero-length mbufs, panicking on a zero-length mbuf
seems incorrect.
No objection from: kib
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Overrunning buffer pointed to by (caddr_t)&oip->i_db[0] of 48 bytes by
passing it to a function which accesses it at byte offset 59 using
argument 60UL.
The issue was inherited from an older FFS implementation and
fixed there with by merging UFS2 in r98542. We follow the
FFS fix.
Discussed with: bde
CID: 1007665
MFC after: 3 days
Since VFS does not/cannot stop writes, sync might run indefinitely, or
be a wrong thing to do at all. E. g. NFS ignores VFS_SYNC() for
forced unmounts, since non-responding server does not allow sync to
finish. On the other hand, filesystems can and do stop writes using
fs-specific facilities, and should already fully flush caches in
VFS_UNMOUNT() due to the race.
Adjust msdosfs tp sync in unmount for forced call, to accomodate the
new behaviour. Note that it is still racy, since writes are not
stopped.
Discussed with: avg, bjk, mckusick
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Threads lifetime cycle, in particular, counting of the threads in
the process, and interlocking with process mutex and thread lock.
The main reason of this is that turnstile locks are after thread
locks, so you e.g. cannot unlock blockable mutex (think process
mutex) while owning thread lock.
- Virtual and profiling itimers, since the timers activation is done
from the clock interrupt context. Replace the p_slock by p_itimmtx
and PROC_ITIMLOCK().
- Profiling code (profil(2)), for similar reason. Replace the p_slock
by p_profmtx and PROC_PROFLOCK().
- Resource usage accounting. Need for the spinlock there is subtle,
my understanding is that spinlock blocks context switching for the
current thread, which prevents td_runtime and similar fields from
changing (updates are done at the mi_switch()). Replace the p_slock
by p_statmtx and PROC_STATLOCK().
The split is done mostly for code clarity, and should not affect
scalability.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
made getmntinfo() return empty flags for smbfs filesystems when
called with MNT_WAIT. It's not visible with mount(8), since it uses
MNT_NOWAIT, but broke autounmount(8) operation.
PR: 195161
Differential Revision: https://reviews.freebsd.org/D1194
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
ext2_print_inode is not really used but it was nice to
have for initial development work. #ifdef it under a
new EXT2FS_DEBUG knob so that we don't spend time
compiling it.
MFC after: 3 days
to mount_nfs(8). They are implemented on Linux, OS X, and Solaris,
and thus can be expected to appear in automounter maps.
Reviewed by: rmacklem@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
to a power of 2. For non-power of 2 settings, intermittent
page faults have been reported. Although the bug that causes
these page faults/crashes has not been identified, it does
not appear to occur when rsize, wsize is a power of 2.
Reported by: tcberner@gmail.com
MFC after: 2 weeks
to a power of 2. For non-power of 2 settings, intermittent
page faults have been reported. Although the bug that causes
these page faults/crashes has not been identified, it does
not appear to occur when rsize, wsize is a power of 2.
Reported by: tcberner@gmail.com
MFC after: 2 weeks
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
two.
nullfs and unionfs need to request suspension if underlying filesystem(s)
use it. Utilize mnt_kern_flag for this purpose.
This is a fixup for 273271.
No strong objections from: kib
Pointy hat to: mjg
MFC after: 2 weeks
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
user nobody and/or setting group nogroup as owner of a file or directory.
Usually at the client side, if there is an username that is not in the
client's passwd database, some clients will send 'nobody@<your.dns.domain>'
in the wire and the NFSv4 server will treat it as an ERROR.
However, if you have a valid user nobody in your passwd database,
the NFSv4 server will treat it as a NFSERR_BADOWNER as its believes the
client doesn't has the username mapped.
Submitted by: Loic Blot <loic.blot@unix-experience.fr>
Reviewed by: rmacklem
Approved by: rmacklem
MFC after: 2 weeks
read/write/poll/ioctl, call standard vnode filedescriptor fop. This
restores the special handling for terminals by calling the deadfs VOP,
instead of always returning ENXIO for destroyed devices or revoked
terminals.
Since destroyed (and not revoked) device would use devfs_specops VOP
vector, make dead_read/write/poll non-static and fill VOP table with
pointers to the functions, to instead of VOP_PANIC.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
is interested in i/o state. Return POLLNVAL for invalid bits, similar
to poll_no_poll(). Note that POLLOUT must not be returned, since
POLLHUP is set.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
have wildcards. This makes it possible for autofs(4) to avoid requesting
automountd(8) action on access to nonexistent nodes - unless wildcards
are actually used.
Note that this change breaks ABI for automountd(8).
Tested by: dhw@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
survives remount in rw, also it is set for vnodes on rootfs before
noatime can be set or clock is adjusted. All conditions result in
wrong atime for accessed vnodes.
Submitted by: bde
MFC after: 1 week
This fix addresses only issues with the pynfs reports, none of these
issues are know to create problems for extant real clients.
Submitted by: Bart Hsiao <bart.hsiao@gmail.com>
Reworked by: myself
Reviewed by: rmacklem
Approved by: rmacklem
Sponsored by: QNAP Systems Inc.
made autofs mix them up: the second one wasn't visible in ls(1) output,
and trying to access it would trigger mount for the first one.
foobar host:/foobar
foo host:/foo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
struct kinfo_file.
- Move the various fill_*_info() methods out of kern_descrip.c and into the
various file type implementations.
- Rework the support for kinfo_ofile to generate a suitable kinfo_file object
for each file and then convert that to a kinfo_ofile structure rather than
keeping a second, different set of code that directly manipulates
type-specific file information.
- Remove the shm_path() and ksem_info() layering violations.
Differential Revision: https://reviews.freebsd.org/D775
Reviewed by: kib, glebius (earlier version)
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
path through the NFS clients' getpages functions.
Introduce vm_pager_free_nonreq(). This function can be used to eliminate
code that is duplicated in many getpages functions. Also, in contrast to
the code that currently appears in those getpages functions,
vm_pager_free_nonreq() avoids acquiring an exclusive object lock in one
case.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
mbuf-initialisation logic that is best left to centralised mbuf utility
code rather than scattered around the kernel.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
variable, and don't store in autofs_mount. Also rename it from 'sc'
to 'autofs_softc', since it's global and extern.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
nullfs vnode shares vnode lock with lower vnode, this allows the
reclamation of nullfs directory vnode in null_lookup(). In this
situation, VOP must return ENOENT.
More, since after the reclamation, the locks of nullfs directory vnode
and lower vnode are no longer shared, the relock of the ldvp does not
restore the correct locking state of dvp, and leaks ldvp lock.
Correct this by unlocking ldvp and locking dvp.
Use cached value of dvp->v_mount.
Reported by: bdrewery
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
In linux EXT4_LINK_MAX is now 64000. We can't really do that
since i_nlink and va_nlink are signed so setting higher values
is likely to cause trouble.
This is a system limitation so set the EXT_LINK_MAX to
what the system can handle.
MFC after: 3 days
writes to files for read-only file systems. Since there are already
checks in nandfs_setattr that return an error, this moves detection of
the error earlier.
It overflows witness.
Shorten the names of some nfs mutexes.
Reported and tested by: pho
No objections from: rmacklem, mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
forcing filesystem VOP_LINK() methods to repeat the code. In
tmpfs_link(), remove redundand check for the type of the source,
already done by VFS.
Note that NFS server already performs this check before calling
VOP_LINK().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Suspend filesystem for unmount. This prevents new tmpfs nodes from
instantiating, and also ensures that only unmount thread can destroy
nodes.
- Do not start tmpfs node deletion until all vnodes are reclaimed,
which guarantees that no thread can access tmpfs data. For this,
call vflush() in the loop, until the mnt_nvnodelistsize is non-zero.
Note that after mnt_nvnodelistsize becomes 0, insmntque() blocks
insertion of a vnode germ into the mount list of vnodes.
- Fail node allocation when the filesystem is being unmounted. This
is race-free due to the vflush() call in loop. This is mostly
cosmetic, avoiding some more work which might be done until
suspension in unmount is started.
Note that there is currently no way to prevent new vnode instantiation
from readers during the unmount. Due to this, forced unmount might
live-lock if vflush() loop cannot get to the zero vnode count due to
races with readers. The unmount would proceed after the load is
lifted.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
