usable for newer CPUs. The new value allows 2 x quad core configuration
dumps to fit within the initial buffer without reallocations.
Approved by: gnn (mentor) (older version)
Pointed out by: rdivacky
dump of detected ULE CPU topology. This dump can be used to check the
topology detection and for general system information.
An example of CPU topology dump is:
kern.sched.topology_spec: <groups>
<group level="1" cache-level="0">
<cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
<flags></flags>
<children>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf">0, 1, 2, 3</cpu>
<flags></flags>
</group>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf0">4, 5, 6, 7</cpu>
<flags></flags>
</group>
</children>
</group>
</groups>
Reviewed by: jeff
Approved by: gnn (mentor)
sched_tick() to prevent multiple increments for one tick. This pushes
the value out of range and breaks priority calculation.
Reviewed by: kib
Found by: pho/nokia
Sponsored by: Nokia
MFC after: 3 days
from idle over the next tick.
- Add a new MD routine, cpu_wake_idle() to wakeup idle threads who are
suspended in cpu specific states. This function can fail and cause the
scheduler to fall back to another mechanism (ipi).
- Implement support for mwait in cpu_idle() on i386/amd64 machines that
support it. mwait is a higher performance way to synchronize cpus
as compared to hlt & ipis.
- Allow selecting the idle routine by name via sysctl machdep.idle. This
replaces machdep.cpu_idle_hlt. Only idle routines supported by the
current machine are permitted.
Sponsored by: Nokia
two ticks by counting the number of switches and the load when
sched_clock() is called.
- If the busy metric exceeds a threshold allow the idle thread to spin
waiting for new work for a brief period to avoid using IPIs. This
reduces the cost on the sender and receiver as well as reducing wakeup
latency considerably when it works.
Sponsored by: Nokia
variables and sysctl nodes.
- In reset walk the children of kern_sched_stats and reset the counters
via the oid_arg1 pointer. This allows us to add arbitrary counters to
the tree and still reset them properly.
- Define a set of switch types to be passed with flags to mi_switch().
These types are named SWT_*. These types correspond to SCHED_STATS
counters and are automatically handled in this way.
- Make the new SWT_ types more specific than the older switch stats.
There are now stats for idle switches, remote idle wakeups, remote
preemption ithreads idling, etc.
- Add switch statistics for ULE's pickcpu algorithm. These stats include
how much migration there is, how often affinity was successful, how
often threads were migrated to the local cpu on wakeup, etc.
Sponsored by: Nokia
o Implement IPI_PREEMPT,
o Set td_lock for the thread being switched out,
o For ULE & SMP, loop while td_lock points to blocked_lock for
the thread being switched in,
o Enable ULE by default in GENERIC and SKI,
fixed pri boost with '1' or any priority less than the current thread's
priority with a value greater than two. Default the boost to
PRI_MIN_TIMESHARE to prevent regular user-space threads from starving
threads in the kernel. This prevents these user-threads from also
being scheduled as if they are high fixed-priority kernel threads.
- Restore the setting of lowpri in tdq_choose(). It has to be either here
or in sched_switch(). I accidentally removed it from both places.
Tested by: kris
do this either. Simply check P_NOLOAD. It'd be nice if this was
in a thread flag so we didn't have an extra cache miss every time we
add and remove a thread from the run-queue.
rqindex back in struct thread.
- Compile kern_switch.c independently again and stop #include'ing it from
schedulers.
- Remove the ts_thread backpointers and convert most code to go from
struct thread to struct td_sched.
- Cleanup the ts_flags #define garbage that was causing us to sometimes
do things that expanded to td->td_sched->ts_thread->td_flags in 4BSD.
- Export the kern.sched sysctl node in sysctl.h
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential. Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
sched_sleep(). This removes extra thread_lock() acquisition and
allows the scheduler to decide what to do with the static boost.
- Change the priority arguments to cv_* to match sleepq/msleep/etc.
where 0 means no priority change. Catch -1 in cv_broadcastpri() and
convert it to 0 for now.
- Set a flag when sleeping in a way that is compatible with swapping
since direct priority comparisons are meaningless now.
- Add a sysctl to ule, kern.sched.static_boost, that defaults to on which
controls the boost behavior. Turning it off gives better performance
in some workloads but needs more investigation.
- While we're modifying sleepq, change signal and broadcast to both
return with the lock held as the lock was held on enter.
Reviewed by: jhb, peter
tdq_runq_add to select the runq rather than hoping we set it properly
when we adjusted the priority. This involves the same number of
branches as before so should perform identically without the extra
fragility.
Tested by: bz
Reviewed by: bz
- Only calculate timeshare priorities once per tick or when a thread is woken
from sleeping.
- Keep the ts_runq pointer valid after all priority changes.
- Call tdq_runq_add() directly from sched_switch() without passing in via
tdq_add(). We don't need to adjust loads or runqs anymore.
- Sort tdq and ts_sched according to utilization to improve cache behavior.
Sponsored by: Nokia
- Normalize the preemption/ipi setting code by introducing sched_shouldpreempt()
so the logical is identical and not repeated between tdq_notify() and
sched_setpreempt().
- In tdq_notify() don't set NEEDRESCHED as we may not actually own the thread lock
this could have caused us to lose td_flags settings.
- Garbage collect some tunables that are no longer relevant.
- When searching for affinity search backwards in the tree from the last
cpu we ran on while the thread still has affinity for the group. This
can take advantage of knowledge of shared L2 or L3 caches among a
group of cores.
- When searching for the least loaded cpu find the least loaded cpu via
the least loaded path through the tree. This load balances system bus
links, individual cache levels, and hyper-threaded/SMT cores.
- Make the periodic balancer recursively balance the highest and lowest
loaded cpu across each link.
Add support for cpusets:
- Convert the cpuset to a simple native cpumask_t while the kernel still
only supports cpumask.
- Pass the derived cpumask down through the cpu_search functions to
restrict the result cpus.
- Make the various steal functions resilient to failure since all threads
can not run on all cpus any longer.
General improvements:
- Precisely track the lowest priority thread on every runq with
tdq_setlowpri(). Before it was more advisory but this ended up having
pathological behaviors.
- Remove many #ifdef SMP conditions to simplify the code.
- Get rid of the old cumbersome tdq_group. This is more naturally
expressed via the cpu_group tree.
Sponsored by: Nokia
Testing by: kris
tree structure that encodes the level of cache sharing and other
properties.
- Provide several convenience functions for creating one and two level
cpu trees as well as a default flat topology. The system now always
has some topology.
- On i386 and amd64 create a seperate level in the hierarchy for HTT
and multi-core cpus. This will allow the scheduler to intelligently
load balance non-uniform cores. Presently we don't detect what level
of the cache hierarchy is shared at each level in the topology.
- Add a mechanism for testing common topologies that have more information
than the MD code is able to provide via the kern.smp.topology tunable.
This should be considered a debugging tool only and not a stable api.
Sponsored by: Nokia
a run-queue. If the priority is numerically raised only change lowpri
if we're certain it will be correct. Some slop is allowed however
previously we could erroneously raise lowpri for an idle cpu that a
thread had recently run on which lead to errors in load balancing
decisions.
lowest priority on the queue for the current cpu vs curthread's
priority. In the case that curthread is waking up many threads of a
lower priority as would happen with a turnstile_broadcast() or wakeup()
of many threads this prevents them from all ending up on the current cpu.
- In sched_add() make the relationship between a scheduled ithread and
the current cpu advisory rather than strict. Only give the ithread
affinity for the current cpu if it's actually being scheduled from
a hardware interrupt. This prevents it from migrating when it simply
blocks on a lock.
Sponsored by: Nokia
the ABI when enabled. There is no longer an embedded lock_profile_object
in each lock. Instead a list of lock_profile_objects is kept per-thread
for each lock it may own. The cnt_hold statistic is now always 0 to
facilitate this.
- Support shared locking by tracking individual lock instances and
statistics in the per-thread per-instance lock_profile_object.
- Make the lock profiling hash table a per-cpu singly linked list with a
per-cpu static lock_prof allocator. This removes the need for an array
of spinlocks and reduces cache contention between cores.
- Use a seperate hash for spinlocks and other locks so that only a
critical_enter() is required and not a spinlock_enter() to modify the
per-cpu tables.
- Count time spent spinning in the lock statistics.
- Remove the LOCK_PROFILE_SHARED option as it is always supported now.
- Specifically drop and release the scheduler locks in both schedulers
since we track owners now.
In collaboration with: Kip Macy
Sponsored by: Nokia
opposed to what process. Since threads by default have teh name of the
process unless over-written with more useful information, just print the
thread name instead.
kern/sched_ule.c - Add __powerpc__ to the list of supported architectures
powerpc/conf/GENERIC - Swap SCHED_4BSD with SCHED_ULE
powerpc/powerpc/genassym.c - Export TD_LOCK field of thread struct
powerpc/powerpc/swtch.S - Handle new 3rd parameter to cpu_switch() by
updating the old thread's lock. Note: uniprocessor-only, will require
modification for MP support.
powerpc/powerpc/vm_machdep.c - Set 3rd param of cpu_switch to mutex of
old thread's lock, making the call a no-op.
Reviewed by: marcel, jeffr (slightly older version)
fixes a bug on UP machines with SMP kernels where the idle thread
constantly switches after trying to steal work from the local cpu.
- Make the idle stealing code more robust against self selection.
- Prefer to steal from the cpu with the highest load that has at least one
transferable thread. Before we selected the cpu with the highest
transferable count which excludes bound threads.
Collaborated with: csjp
Approved by: re
to simply switch rather than lowering priority and switching. This allows
threads of equal priority to run but not lesser priority.
Discussed with: davidxu
Reported by: NIIMI Satoshi <sa2c@sa2c.net>
Approved by: re
after the switch leads to a race where the outgoing thread still owns
the local queue lock while another cpu may switch it in. This race
is only possible on machines where cpu_switch can take significantly
longer on different cpus which in practice means HTT machines with
unfair thread scheduling algorithms.
Found by: kris (of course)
Approved by: re
starvation caused by unbalanced interrupt loads.
- Change the rebalancer to work on stathz ticks but retain randomization.
- Simplify locking in tdq_idled() to use the tdq_lock_pair() rather than
complex sequences of locks to avoid deadlock.
Reported by: kris
Approved by: re
value for kern.sched.preempt_thresh appropriately. It can still by
adjusted at runtime. ULE will still use IPI_PREEMPT in certain
migration situations.
- Assert that we're not trying to compile ULE on an unsupported
architecture. To date, I believe only i386 and amd64 have implemented
the third cpu switch argument required.
Approved by: re
- Improve load long-term load balancer by always IPIing exactly once.
Previously the delay after rebalancing could cause problems with
uneven workloads.
- Allow nice to have a linear effect on the interactivity score. This
allows negatively niced programs to stay interactive longer. It may be
useful with very expensive Xorg servers under high loads. In general
it should not be necessary to alter the nice level to improve interactive
response. We may also want to consider never allowing positively niced
processes to become interactive at all.
- Initialize ccpu to 0 rather than 0.0. The decimal point was leftover
from when the code was copied from 4bsd. ccpu is 0 in ULE because ULE
only exports weighted cpu values.
Reported by: Steve Kargl (Load balancing problem)
Approved by: re
changes the units from seconds to the value of 'ticks' when swapped
in/out. ULE does not have a periodic timer that scans all threads in
the system and as such maintaining a per-second counter is difficult.
- Change computations requiring the unit in seconds to subtract ticks
and divide by hz. This does make the wraparound condition hz times
more frequent but this is still in the range of several months to
years and the adverse effects are minimal.
Approved by: re
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
on 2cpu machines by reducing it to 1 by default. This improves loaded
operation on 8cpu machines by increasing it to 3 where the extra idle
time is not as critical.
Approved by: re
tdq_group structure. Hyper-threaded cores won't really benefit from
seperate locks anyway.
- Seperate out the migration case from sched_switch to simplify the main
switch code. We only migrate here if called via sched_bind().
- When preempted place the preempted thread back in the same queue at
the head.
- Improve the cpu group and topology infrastructure.
Tested by: many on current@
Approved by: re
machines.
- Leave the long-term load balancer running by default once per second.
- Enable stealing load from the idle thread only when the remote processor
has more than two transferable tasks. Setting this to one further
improves buildworld. Setting it higher improves mysql.
- Remove the bogus pick_zero option. I had not intended to commit this.
- Entirely disallow migration for threads with SRQ_YIELDING set. This
balances out the extra migration allowed for with the load balancers.
It also makes pick_pri perform better as I had anticipated.
Tested by: Dmitry Morozovsky <marck@rinet.ru>
Approved by: re
properly. We have to temporarily unlock the TDQ lock so we can lock
the thread and add it to the run queue. This is used only for KSE.
- When we add a thread from the tdq_move() via sched_balance() we need to
ipi the target if it's sitting in the idle thread or it'll never run.
Reported by: Rene Landan
Approved by: re