Update iwlwifi 22000 firmware to -73 and rebuilds for 9000/9260.
Update the driver to accept the newer version.
Firmware was obtained from linux-firmware at
150864a4d73e8c448eb1e2c68e65f07635fe1a66.
Sponsored by: The FreeBSD Foundation
MFC after: 23 days
QAT in-tree driver ported from out-of-tree release available
from 01.org.
The driver exposes complete cryptography and data compression
API in the kernel and integrates with Open Crypto Framework.
Details of supported operations, devices and usage can be found
in man and on 01.org.
Patch co-authored by: Krzysztof Zdziarski <krzysztofx.zdziarski@intel.com>
Patch co-authored by: Michal Jaraczewski <michalx.jaraczewski@intel.com>
Patch co-authored by: Michal Gulbicki <michalx.gulbicki@intel.com>
Patch co-authored by: Julian Grajkowski <julianx.grajkowski@intel.com>
Patch co-authored by: Piotr Kasierski <piotrx.kasierski@intel.com>
Patch co-authored by: Adam Czupryna <adamx.czupryna@intel.com>
Patch co-authored by: Konrad Zelazny <konradx.zelazny@intel.com>
Patch co-authored by: Katarzyna Rucinska <katarzynax.kargol@intel.com>
Patch co-authored by: Lukasz Kolodzinski <lukaszx.kolodzinski@intel.com>
Patch co-authored by: Zbigniew Jedlinski <zbigniewx.jedlinski@intel.com>
Reviewed by: markj, jhb (OCF integration)
Reviewed by: debdrup, pauamma (docs)
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34632
A replacement QAT driver will be imported, but this replacement does not
support Atom C2xxx hardware. So, the existing driver will be kept
around to provide opencrypto offload support for those chipsets.
Reviewed by: pauamma, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35817
With clang 15, the following -Werror warning is produced:
sys/contrib/openzfs/module/zfs/zfs_fm.c:256:6: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int cnt = 0;
^
The 'cnt' variable does not seem to be used for anything, but since this
is contributed code, suppress the warning instead.
MFC after: 3 days
Clang 15 is more strict about function definitions not matching
declarations, and zlib has a lot of these, but since it is contributed
code (and in K&R style to boot), suppress those warnings instead.
MFC after: 3 days
Generally, access to the kernel debugger is considered to be unsafe from
a security perspective since it presents an unrestricted interface to
inspect or modify the system state, including sensitive data such as
signing keys.
However, having some access to debugger functionality on production
systems may be useful in determining the cause of a panic or hang.
Therefore, it is desirable to have an optional policy which allows
limited use of ddb(4) while disabling the functionality which could
reveal system secrets.
This loadable MAC module allows for the use of some ddb(4) commands
while preventing the execution of others. The commands have been broadly
grouped into three categories:
- Those which are 'safe' and will not emit sensitive data (e.g. trace).
Generally, these commands are deterministic and don't accept
arguments.
- Those which are definitively unsafe (e.g. examine <addr>, search
<addr> <value>)
- Commands which may be safe to execute depending on the arguments
provided (e.g. show thread <addr>).
Safe commands have been flagged as such with the DB_CMD_MEMSAFE flag.
Commands requiring extra validation can provide a function to do so.
For example, 'show thread <addr>' can be used as long as addr can be
checked against the system's list of process structures.
The policy also prevents debugger backends other than ddb(4) from
executing, for example gdb(4).
Reviewed by: markj, pauamma_gundo.com (manpages)
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35371
When ice is built as a module, it can't be loaded due to unresolved
symbol. Ensuring in Makefile that the ice_rdma.c is built fixes the
problem.
Signed-off-by: Bartosz Sobczak <bartosz.sobczak@intel.com>
Signed-off-by: Eric Joyner <erj@freebsd.org>
Reviewed by: erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D35687
Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
After some discussion, for now, simply revert the change to split
the driver up into if_rtw88_core.ko and if_rtw88_pci.ko as we do
not have an if_rtw88.ko anymore. We do have code trying to
auto-load modules, e.g. ifconfig, based on if_xxx.ko.
We could, based on Makefile magic or further code, generate a
if_rtw88.ko module with proper dependencies and keep this but for
simplicity stay with the one slightly larger module for now.
Should code appear to do this "properly" we can revisit this once
USB support has landed.
Slightly update the module Makefile to keep the separation of files
between core and pci bits visible and maintainable for the future.
This reverts commit 0f7b9777f8f39fbc230b3e1de2f844d9f839adea.
OpenVPN Data Channel Offload (DCO) moves OpenVPN data plane processing
(i.e. tunneling and cryptography) into the kernel, rather than using tap
devices.
This avoids significant copying and context switching overhead between
kernel and user space and improves OpenVPN throughput.
In my test setup throughput improved from around 660Mbit/s to around
2Gbit/s.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34340
Add support of ARM CMN-600 controller, PMU access functions only.
Add support of PMU counters of ARM CMN-600 controller.
Reviewed by: mhorne
Sponsored By: ARM
Differential Revision: https://reviews.freebsd.org/D32321
Remove -mgeneral-regs-only when building the arm64 blake3 code. It
uses simd instructions so will use non-general purpose registers.
Sponsored by: The FreeBSD Foundation
Along with the snd_sb8 and snd_sb16 drivers. They supported ISA
Creative Sound Blaster and compatible sound cards.
Note that isa/sb.h is not removed, as it is still used by some PCI
sound card drivers.
ISA sound card drivers are deprecated as discussed on the current[1] and
stable[2] mailing lists. Deprecation notices were added in e39ec8933be4
and MFCd to stable branches.
Driver removals are being committed individually so that specific
drivers can be restored if necessary (either in FreeBSD or by downstream
projects).
[1] https://lists.freebsd.org/archives/freebsd-current/2022-March/001680.html
[2] https://lists.freebsd.org/archives/freebsd-stable/2022-March/000585.html
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
They are not loadable otherwise.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35369
Split the driver up into two modules (if_rtw88_pci.ko and rtw88_core.ko).
This is in preparation for the hopefully eventually upcoming USB support
using the same driver core.
Note: this changes the module name to load to if_rtw88_pci.ko instead of
if_rtw88.ko. If using devmatch(8) everything should stay the same as
the driver name (used for net.wlan.devices) stays rtw88. If using
kld_list in rc.conf or loader.conf you will need to adjust the name.
Update man page for this.
MFC after: 3 days
Notable upstream pull request merges:
#12321 Fix inflated quiesce time caused by lwb_tx during zil_commit()
#13244 zstd early abort
#13360 Verify BPs as part of spa_load_verify_cb()
#13452 More speculative prefetcher improvements
#13466 Expose zpool guids through kstats
#13476 Refactor Log Size Limit
#13484 FreeBSD: libspl: Add locking around statfs globals
#13498 Cancel in-progress rebuilds when we finish removal
#13499 zed: Take no action on scrub/resilver checksum errors
#13513 Remove wrong assertion in log spacemap
Obtained from: OpenZFS
OpenZFS commit: b9d98453f9387c413f91d1d9cdb0cba8e04dbd95
This module depends on the presence of both INET and INET6 options in
order to compile.
Reviewed by: erj
Fixes: cdcd52d41e24 ("irdma: Add RDMA driver for Intel(R) Ethernet...")
Differential Revision: https://reviews.freebsd.org/D35343
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access to shared resources.
This interface already existed in the standalone out-of-tree
1.34.2 driver; this commit adds and enables it in the in-kernel
driver.
Note:
Adds hack to module Makefile to compile interface/.m files
These are required for the RDMA client interface, but they don't
build as-is like the normal .c files. The source directory doesn't
seem to be included by default, so add lines that specifically
add them as libraries so that ice_rdma.h can be found and the
interface files will compile.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30889
Notable upstream pull request merges:
#10662 zvol_wait: Ignore locked zvols
#12789 Improve log spacemap load time
#12812 Improved zpool status output, list all affected datasets
#13277 FreeBSD: Use NDFREE_PNBUF if available
#13302 Make zfs_max_recordsize default to 16M
#13311 Fix error handling in FreeBSD's get/putpages VOPs
#13345 FreeBSD: Fix translation from ABD to physical pages
#13373 zfs: holds: dequadratify
#13375 Corrected edge case in uncompressed ARC->L2ARC handling
#13388 Improve mg_aliquot math
#13405 Reduce dbuf_find() lock contention
#13406 FreeBSD: use zero_region instead of allocating a dedicated page
Obtained from: OpenZFS
OpenZFS commit: c0cf6ed6792e545fd614c2a88cb53756db7e03f8
Update to the latest iwlwifi firmware based on
linux-firmware at b19cbdca78ab2adfd210c91be15a22568e8b8cae
(tag: 20220509)
and update firmware module Makefiles accordingly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import code update from iwlwifi-next
at e89600ebeeb14d18c0b062837a84196f72542830.
This amongst other things removes the deprecated BCAST_FILTERING option,
which we had disabled before due to firmware issues.
Also prepares us for the next firmware update.
The "enable_ini" module option has become an integer with a
sysctl proc equivalent handler. Disable the module parameter changing
for the moment until we'll have working LinuxKPI support or implement
it as SYSCTL_PROC in FreeBSD directly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
To avoid annoyng messages from glibc-2.35 test suite add the simple
implementation of rseq syscall which is do nothing for now.
I plan to implement it if and when the API stabilizes.
MFC after: 2 weeks
Firmware version 9.9.11 added support for hw_scan and is reportedly
causing more problems than 9.9.10 does. Until we get a chance to
test this out downgrade the firmware in order to help people testing
more.
Sponsored by: The FreeBSD Foundation
PR: 248235
MFC after: 2 days
X-MFC: just to get the reminder with the original commit
X-MFC with: 73d4ebea3567f18db549638c3d897b6d6758faa4
FSE_createCTable raises the warning because we stub out malloc() to
NULL in the kernel, so the passed in size is unused.
ZSTD_seqDecompressedSize has a variable whose value is only used in
assertions.
NB: These files are missing corresponding entries in sys/conf/files.
