Currently implemented are most things related to states and interfaces, todo
are address tables and altq. I've tried to keep this roughly in sync with a
project implementing this for net-snmpd.
Reviewed by: harti, dhartmei
MFC after: 1 month
This allows us to:
- perform scatter gather operations without using temporary files,
- create non-linear pipelines, and
- implement file views using symbolic links.
File view idea by: Vassilios Karakoidas
Portalfs pointer by: John Ioannidis
MFC after: 1 month
cojunction with -C and is used by /etc/rc.d/newsyslog.
I forgot that this was in my perforce tree and not my running system and
thus committed a non-working newsyslog script.
Reported by: des
Pointy hat: brooks
with EBUSY and a cdrom is not mounted at /cdrom, sysinstall fails to
treat it as an error and thinks that the disk mounted ok. However, it
doesn't find a cdrom.inf file so it complains. Later when it tries to
unmount the disk due to a mediaClose() umount(2) returns an error, and it
never clears its internal mounted flag. The fix here is to properly
handle EBUSY as an error if there isn't a CD already mounted at /cdrom.
- Add a new CDROMInitQuiet variable that can be used to shut up the dialog
box about the mount(2) system call failing when trying to mount a CD-ROM.
This is used by the feature described below.
- When using a fixit CD, first try to see if we can mount the disc in the
drive now and use it as a fixit CD. If not, then prompt the user to
insert the disc and try again. If we do succeed on the first "silent"
probe then we don't ask the user to eject the disk after leaving fixit
mode.
- Add a simple file existence test to make sure that the disc that we mount
really is a livefs disc.
- Explicitly switch back to ttyv0 when using the standard console after
the fixit shell dies. Previously this behavior worked accidentally
because all the fixit modes popped up a dialog box which contained a
hidden switch to ttyv0.
MFC after: 1 day
While version 4 entries are architecture-independent, we
also store old (version 3) entries in native byte order.
Also, the hash itself is created in a native byte order.
With this change, pwd_mkdb(8) can be used to cross-build
*pwd.db files for another architecture.
Tested on: i386, amd64, alpha, sparc64
with moderate IO going on, system usage can hover around 65-77% even
though it would benefit from higher performance. Typically, only truly
idle systems pass the 90% mark so only demote then.
Also, add conditional code to allow different invokations for objcopy
depending on whether we're compiled on an i386 arch or amd64 arch, so
that we can produce x86-64 object files on amd64.
Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx)
deserves a big thanks for submitting initial patches to make it
work. I have mangled his contributions appropriately.
The main gotcha with Windows/x86-64 is that Microsoft uses a different
calling convention than everyone else. The standard ABI requires using
6 registers for argument passing, with other arguments on the stack.
Microsoft uses only 4 registers, and requires the caller to leave room
on the stack for the register arguments incase the callee needs to
spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall
and _fastcall, all routines on Windows/x86-64 uses the same convention.
This unfortunately means that all the functions we export to the
driver require an intermediate translation wrapper. Similarly, we have
to wrap all calls back into the driver binary itself.
The original patches provided macros to wrap every single routine at
compile time, providing a secondary jump table with a customized
wrapper for each exported routine. I decided to use a different approach:
the call wrapper for each function is created from a template at
runtime, and the routine to jump to is patched into the wrapper as
it is created. The subr_pe module has been modified to patch in the
wrapped function instead of the original. (On x86, the wrapping
routine is a no-op.)
There are some minor API differences that had to be accounted for:
- KeAcquireSpinLock() is a real function on amd64, not a macro wrapper
around KfAcquireSpinLock()
- NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole
NDIS_BUFFER API a bit to accomodate this.
Bugs fixed along the way:
- IoAllocateMdl() always returned NULL
- kern_windrv.c:windrv_unload() wasn't releasing private driver object
extensions correctly (found thanks to memguard)
This has only been tested with the driver for the Broadcom 802.11g
chipset, which was the only Windows/x86-64 driver I could find.
properly initialized, that happens when lpc is called from a tty.
Without this change, it's possible to get SIGSEGV simply doing:
echo "..:" | lpc
Reported by: Wojciech A. Koszek <dunstan at freebsd czest pl>
PR: 77462 (patch rewritten by myself)
MFC After: 1 week
entry having stepping value of zero can cause crontab to hang there,
and if the main crontab is being changed in this way, then cron(8)
will keep spining.
Obtained from: OpenBSD [src/usr.sbin/cron/entry.c,v 1.17]
PR: 68683 (my own, but forgot to commit it...)
MFC After: 1 week
o Use SYSCTL_IN() macro instead of direct call of copyin(9).
Submitted by: ume
o Move sysctl_drop() implementation to sys/netinet/tcp_subr.c where
most of tcp sysctls live.
o There are net.inet[6].tcp[6].getcred sysctls already, no needs in
a separate struct tcp_ident_mapping.
Suggested by: ume
nodes from (N + 1) to 1, where N is the number of
nodes in the system.
- Implement "ls -l" which runs the "show" command for
each node.
In collaboration with: glebius
behaviour of chflags within a jail. If set to 0 (the default), then a
jailed root user is treated as an unprivileged user; if set to 1, then
a jailed root user is treated the same as an unjailed root user.
This is necessary to allow "make installworld" to work inside a jail,
since it attempts to manipulate the system immutable flag on certain
files.
Discussed with: csjp, rwatson
MFC after: 2 weeks
Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can
simulate driver stacking.
In Windows, each loaded driver image is attached to a DRIVER_OBJECT
structure. Windows uses the registry to match up a given vendor/device
ID combination with a corresponding DRIVER_OBJECT. When a driver image
is first loaded, its DriverEntry() routine is invoked, which sets up
the AddDevice() function pointer in the DRIVER_OBJECT and creates
a dispatch table (based on IRP major codes). When a Windows bus driver
detects a new device, it creates a Physical Device Object (PDO) for
it. This is a DEVICE_OBJECT structure, with semantics analagous to
that of a device_t in FreeBSD. The Windows PNP manager will invoke
the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT
and the PDO.
The AddDevice() function then creates a new DRIVER_OBJECT structure of
its own. This is known as the Functional Device Object (FDO) and
corresponds roughly to a private softc instance. The driver uses
IoAttachDeviceToDeviceStack() to add this device object to the
driver stack for this PDO. Subsequent drivers (called filter drivers
in Windows-speak) can be loaded which add themselves to the stack.
When someone issues an IRP to a device, it travel along the stack
passing through several possible filter drivers until it reaches
the functional driver (which actually knows how to talk to the hardware)
at which point it will be completed. This is how Windows achieves
driver layering.
Project Evil now simulates most of this. if_ndis now has a modevent
handler which will use MOD_LOAD and MOD_UNLOAD events to drive the
creation and destruction of DRIVER_OBJECTs. (The load event also
does the relocation/dynalinking of the image.) We don't have a registry,
so the DRIVER_OBJECTS are stored in a linked list for now. Eventually,
the list entry will contain the vendor/device ID list extracted from
the .INF file. When ndis_probe() is called and detectes a supported
device, it will create a PDO for the device instance and attach it
to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call
our NdisAddDevice() handler to create the FDO. The NDIS miniport block
is now a device extension hung off the FDO, just as it is in Windows.
The miniport characteristics table is now an extension hung off the
DRIVER_OBJECT as well (the characteristics are the same for all devices
handled by a given driver, so they don't need to be per-instance.)
We also do an IoAttachDeviceToDeviceStack() to put the FDO on the
stack for the PDO. There are a couple of fake bus drivers created
for the PCI and pccard buses. Eventually, there will be one for USB,
which will actually accept USB IRP.s
Things should still work just as before, only now we do things in
the proper order and maintain the correct framework to support passing
IRPs between drivers.
Various changes:
- corrected the comments about IRQL handling in subr_hal.c to more
accurately reflect reality
- update ndiscvt to make the drv_data symbol in ndis_driver_data.h a
global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it.
- Obtain the softc pointer from the miniport block by referencing
the PDO rather than a private pointer of our own (nmb_ifp is no
longer used)
- implement IoAttachDeviceToDeviceStack(), IoDetachDevice(),
IoGetAttachedDevice(), IoAllocateDriverObjectExtension(),
IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(),
IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(),
IoInitializeIrp()
- fix a few mistakes in the driver_object and device_object definitions
- add a new module, kern_windrv.c, to handle the driver registration
and relocation/dynalinkign duties (which don't really belong in
kern_ndis.c).
- made ndis_block and ndis_chars in the ndis_softc stucture pointers
and modified all references to it
- fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they
work correctly with the new driver_object mechanism
- changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver()
(which is now deprecated)
- used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines
instead of kludged up alloc/free routines
- added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
utility:
The tcpdrop command drops the TCP connection specified by the
local address laddr, port lport and the foreign address faddr,
port fport.
Obtained from: OpenBSD
Reviewed by: rwatson (locking), ru (man page), -current
MFC after: 1 month
xt_rtaddr member of SVCXPRT structure. This allows to use IPv6
address stored in "struct sockaddr_storage" in "struct netbuf".
- Output the reason of getnameinfo() error.
Reviewed by: alfred
- Constify structure members that should not be changed
during process.
- Apply static where needed
- signed/unsigned madness
- Bump WARNS?= levels from 2 to 6
(this is a diff reduction for a subsequent commit against these
Makefile's)
any pending RADIUS transaction. Use this before sending RAD_STOP RADIUS
messages so that we definitely ``stop'' the session.
It was discovered that sometimes when the link timed out, we got lucky
enough to have an un-ACK'd RADIUS accounting transaction in progress,
resulting in the RAD_STOP message failing to send.
Original report found on: A russion news group
Text translated by: glebius
Tested by: Alexey Popov llp at iteranet dot com
MFC after: 7 days
measurements suggest that higher degrees of parallelism for large
numbers of clients help performance substantially.
Submitted by: Eric Anderson <anderson at centtech dot com>
- Use foo(void) instead of foo().
- Use static where applicable.
- Apply more const's when passing parameters
- signed/unsigned madness
- Avoid namespace collision by adding underscores.
- For 64-bit architectures, use %zx instead of %x
when necessary.
- When storing constants, use const instead of
variable.
- Bump WARNS?= from 2 to 6
That should fix the problem with invalid PSM returned from bthidcontrol.
Pointy hat goes to me.
PR: misc/76107
Submitted by: Hiroyuki Aizu < aizu at navi dot org >
MFC after: 1 day
fdcontrol/fdcontrol.c:
- Add const constraint to an intermediate value
which is not supposed to be changed elsewhere.
fdread/fdread.c:
- Use _devname in favor of devname to avoid name
conflicit.
- -1 is less than any positive number so in order
to get the block to function, we should get the
block a little earlier.
- Cast to remove signed when we are sure that a
return value is positive, or is compared with
an positive number (tracknumber of a floppy
disk is not likely to have UINT_MAX/2 anyway)
fdread/fdutil.c:
- Use more specific initializer
fdwrite/fdwrite.c:
- Use static on format_track since it's not
referenced in other places.
- Use const char* to represent string constant.
Bump WARNS accordingly.
This example caused me to incorrectly believe that you must use the
generic device nodes when you can in fact use either. It's often better
to use the driver specific node.
device is involved, (e.g. plugin a hub with multiple devices
already attached to it)
Submitted by: Naoyuki Tai <ntai@smartfruit.com>
PR: 43993
MFC in: 1 week
so remove argc and argv from main() argument.
At the same time, user and tt is not likely to be changed during
execution so mark them const.
This commit should guarantee nologin to pass WARNS=6.
Tested on: i386
MFC After: 1 month
parameter 2 in chmod(2), which is a mode_t (and in turn a __uint_16_t),
it's more likely that it should be defined as an unsigned variable.
This commit should make newsyslog WARNS=6 clean, but don't bump the knob
until I have a universe build.
MFC After: 1 month
for calculating the job number for a job based on the control-file name.
We might receive cf-files named by other implementations of lpr, where
the job number shown by lpq would not match the job number that other
commands expected for the same name.
This also uses a newer algorithm for determining a job number, to avoid
problems caused when a control-file is named using an IP address, instead
of the hostname.
This also moved the declaration if isowner() from lp.h to rmjob.c. When I
went to change the parameters, I noticed that rmjob.c was the only source
file which uses it.
MFC after: 2 weeks
control-file for each print job. This is partially because the previous
checks still let through some characters which would cause trouble for
other applications which try to process the resulting userid -- such as
accounting programs.
But the main reason is to handle the case where some remote host sends a
print job where the given userid is an uppercase-version of the real userid.
For that case, lpd will now check for uppercase letters in the userid. If
there are any, it will check to see if the given userid (with the uppercase
letters) is a valid one. If it is *not* valid, then lpd will change the
userid to all-lowercase right when the job is received.
MFC after: 2 weeks
than a colon, so don't allow whitespace in program names. To be
consistent with hostnames, don't allow whitespace in the program
name specifiers in syslog.conf either.
(The first change is by Markus from the PR, the second is mine.)
PR: 68691
Submitted by: Markus Oestreicher <m.oe@x-trader.de>
MFC after: 3 weeks
disk. This is main reason why sysinstall presents SCSI CDROM to
available disks in Fdisk/Label menu. In addition, adding a blank
SCSI CDROM to the menu generates floating point exception in sparc64.
Disk_Names() just extracts sysctl "kern.disks". Why GEOM treats SCSI
CDROM as a disk is beyond me and that should be investigated.
For temporary workaround, ignore SCSI CDROM device.
PR: sparc64/72962
Tested by: R. Tyler Ballance < tyler AT tamu DOT edu>
MFC after: 1 week
the file will be created with the right access, if the call to open()
does create it. Also fix the other call to umask() to turn off
"write others", just as a matter of general safety.
PR: 74418
MFC after: 4 days
sure the data file has been completely transfered before starting to
print it. This is needed because some implementations of lpr will send
the control-file for a print job before sending the matching data-files,
and that can cause problems if the receiving host is a busy print-server.
MFC after: 2 weeks
This allows LCP ECHOs to be enabled independently of LQR reports.
Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page). I'll update UPDATING to reflect this.
PR: 74821
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over the 32 bit limit, so reoganise
things to allow a bunch more options.
Go to version 3.4.1 so that any compatability problems can be identified.
units (as specified in _BIF). (noted by Bruno Ducrot)
o In looking in the standard, if the cap numbers are 0xffffffff, then acpi
is reporting unknown for that field. Report unknown numbers properly.
o Update the state to reflect charging, discharging and critical.
my patches for this information. Commit my more complete version.
This version isn't complete yet, since some details aren't handled
right just yet.
Poaching by: phk
hence bump it to 6.
Note that the last commit message was not quite accurate. While the
assumption exists in the code, it's not possible to have an
uninitialized p there because if lflag is set when username is NULL
then execution would be terminated earlier.
- Allow the upload directory to be optional. If the upload directory
field is cleared to the empty string then no directory will be created.
- Don't create a bin/ subdirectory in ftp's home dir containing ls(1) and
date(1) as ftpd(8) no longer requires it.
- Create a pwd.db file in etc/ instead of a passwd file.
- Ignore NIS compat entries in /etc/group and /etc/master.passwd when
building the anonymous files.
PR: bin/60662
Submitted by: Olafur Osvaldsson oli at isnic dot is
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
http://www.securityfocus.com/archive/1/379450
This patch is based on dillon's patch on DragonFlyBSD, which is in
turn derived from OpenBSD's src/usr.sbin/pppd/cbcp.c,v 1.6.
Obtained from: OpenBSD via DragonFlyBSD
Encouraged by: nectar
This commit does not affect the code generated, as proven by md5'ing
resulting binaries.
Bump WARNS accordingly.
Compiled on: sparc64, ia64, i386
Reviewed by: alfred (but blame me if anything goes wrong :-)
syslog(3) if we are a priveleged program (sshd, su, etc.).
- Make syslogd open an additional socket /var/run/logpriv, with 0600
permissions.
- In libc, try to use this socket.
- Do not loop forever if we are using this socket (partial backout of 1.31)
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
MFC after: 1 month
remove limit for 20 sockets.
- Add possibility to specify file mode for sockets created with '-l'.
- Check that socket name in '-l' is absolute.
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
the implementation of the following feature in revision 1.4:
- Install Makefile.yp as /var/yp/Makefile.dist and link it to
/var/yp/Makefile only if /var/yp/Makefile doesn't already exist.
Suggested by Peter Wemm.
The actual code was only symlinking when no /var/yp/Makefile.dist
existed, i.e., never.
Since we can only override the DSDT, a custom ASL dumped previously that
contained SSDTs would result in lots of multiple definition errors.
A longer-term fix involves adding the ability to override SSDTs to ACPI-CA.
MFC after: 3 days
Disable some code which magics minor numbers into card/port numbers.
I think we will have to parse this from the device name in the future,
but I need to confer with peter@ about this.
Put sicontrol back in the build.
Troublespotter: dwhite
