this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
SMTX in utils such as ps and top. The KI_CTTY flag was assigned to
kinfo_proc->ki_kiflag rather than or'd into the flag, thus clobbering
any flags set earlier, including KI_MTXBLOCK.
Prodding by: peter
- Restore inferior() to being iterative rather than recursive.
- Assert that the proctree_lock is held in inferior() and change the one
caller to get a shared lock of it. This also ensures that we hold the
lock after performing the check so the check can't be made invalid out
from under us after the check but before we act on it.
Requested by: bde
a single kern.security.seeotheruids_permitted, describes as:
"Unprivileged processes may see subjects/objects with different real uid"
NOTE: kern.ps_showallprocs exists in -STABLE, and therefore there is
an API change. kern.ipc.showallsockets does not.
- Check kern.security.seeotheruids_permitted in cr_cansee().
- Replace visibility calls to socheckuid() with cr_cansee() (retain
the change to socheckuid() in ipfw, where it is used for rule-matching).
- Remove prison_unpcb() and make use of cr_cansee() against the UNIX
domain socket credential instead of comparing root vnodes for the
UDS and the process. This allows multiple jails to share the same
chroot() and not see each others UNIX domain sockets.
- Remove unused socheckproc().
Now that cr_cansee() is used universally for socket visibility, a variety
of policies are more consistently enforced, including uid-based
restrictions and jail-based restrictions. This also better-supports
the introduction of additional MAC models.
Reviewed by: ps, billf
Obtained from: TrustedBSD Project
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
unnecessary breakage.
While here, use explicit sizes for the string fields so that we dont
have unintentional changes again in the future when key tunables change.
This still is not quite right, but a june userland is happy with
a -current kernel with these tweaks.
The p_can(...) construct was a premature (and, it turns out,
awkward) abstraction. The individual calls to p_canxxx() better
reflect differences between the inter-process authorization checks,
such as differing checks based on the type of signal. This has
a side effect of improving code readability.
o Replace direct credential authorization checks in ktrace() with
invocation of p_candebug(), while maintaining the special case
check of KTR_ROOT. This allows ktrace() to "play more nicely"
with new mandatory access control schemes, as well as making its
authorization checks consistent with other "debugging class"
checks.
o Eliminate "privused" construct for p_can*() calls which allowed the
caller to determine if privilege was required for successful
evaluation of the access control check. This primitive is currently
unused, and as such, serves only to complicate the API.
Approved by: ({procfs,linprocfs} changes) des
Obtained from: TrustedBSD Project
lock. We now use temporary variables to save the process argument pointer
and just update the pointer while holding the lock. We then perform the
free on the cached pointer after releasing the lock.
real uid, saved uid, real gid, and saved gid to ucred, as well as the
pcred->pc_uidinfo, which was associated with the real uid, only rename
it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
original macro that pointed.
p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
we figure out locking and optimizations; generally speaking, this
means moving to a structure like this:
newcred = crdup(oldcred);
...
p->p_ucred = newcred;
crfree(oldcred);
It's not race-free, but better than nothing. There are also races
in sys_process.c, all inter-process authorization, fork, exec, and
exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
allocation.
o Clean up ktrcanset() to take into account changes, and move to using
suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
calls to better document current behavior. In a couple of places,
current behavior is a little questionable and we need to check
POSIX.1 to make sure it's "right". More commenting work still
remains to be done.
o Update credential management calls, such as crfree(), to take into
account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
change_euid()
change_egid()
change_ruid()
change_rgid()
change_svuid()
change_svgid()
In each case, the call now acts on a credential not a process, and as
such no longer requires more complicated process locking/etc. They
now assume the caller will do any necessary allocation of an
exclusive credential reference. Each is commented to document its
reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
processes and pcreds. Note that this authorization, as well as
CANSIGIO(), needs to be updated to use the p_cansignal() and
p_cansched() centralized authorization routines, as they currently
do not take into account some desirable restrictions that are handled
by the centralized routines, as well as being inconsistent with other
similar authorization instances.
o Update libkvm to take these changes into account.
Obtained from: TrustedBSD Project
Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
process we're looking for. (I don't think this can currently
happen, but it depends how the function is called).
PR: 25932
Submitted by: David Xu <davidx@viasoft.com.cn>
in the hopes that they will actually *read* the comment above
it and *follow* the instructions so as to cause all the rest
of us less a lot less grief.
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
- All processes go into the same array of queues, with different
scheduling classes using different portions of the array. This
allows user processes to have their priorities propogated up into
interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
32. We used to have 4 separate arrays of 32 queues each, so this
may not be optimal. The new run queue code was written with this
in mind; changing the number of run queues only requires changing
constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter. This
is intended to be used to create per-cpu run queues. Implement
wrappers for compatibility with the old interface which pass in
the global run queue structure.
- Group the priority level, user priority, native priority (before
propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
This was used to detect when a process' priority had lowered and
it should yield. We now effectively yield on every interrupt.
- Activate propogate_priority(). It should now have the desired
effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
idle loop. It interfered with propogate_priority() because
the idle process needed to do a non-blocking acquire of Giant
and then other processes would try to propogate their priority
onto it. The idle process should not do anything except idle.
vm_page_zero_idle() will return in the form of an idle priority
kernel thread which is woken up at apprioriate times by the vm
system.
- Update struct kinfo_proc to the new priority interface. Deliberately
change its size by adjusting the spare fields. It remained the same
size, but the layout has changed, so userland processes that use it
would parse the data incorrectly. The size constraint should really
be changed to an arbitrary version number. Also add a debug.sizeof
sysctl node for struct kinfo_proc.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
while we are copying it to the kinfo_proc structure.
- Test against p_stat to see if we are blocked on a mutex.
- Terminate ki_mtxname with a null char rather than ki_wmesg.
of explicit calls to lockmgr. Also provides macros for the flags
pased to specify shared, exclusive or release which map to the
lockmgr flags. This is so that the use of lockmgr can be easily
replaced with optimized reader-writer locks.
- Add some locking that I missed the first time.
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
chgsbsize(), which are called rather frequently and may be called from an
interrupt context in the case of chgsbsize(). Instead, do the hash table
lookup and maintenance when credentials are changed, which is a lot less
frequent. Add pointers to the uidinfo structures to the ucred and pcred
structures for fast access. Pass a pointer to the credential to chgproccnt()
and chgsbsize() instead of passing the uid. Add a reference count to the
uidinfo structure and use it to decide when to free the structure rather
than freeing the structure when the resource consumption drops to zero.
Move the resource tracking code from kern_proc.c to kern_resource.c. Move
some duplicate code sequences in kern_prot.c to separate helper functions.
Change KASSERTs in this code to unconditional tests and calls to panic().
int p_can(p1, p2, operation, privused)
which allows specification of subject process, object process,
inter-process operation, and an optional call-by-reference privused
flag, allowing the caller to determine if privilege was required
for the call to succeed. This allows jail, kern.ps_showallprocs and
regular credential-based interaction checks to occur in one block of
code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL,
and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a
series of static function checks in kern_prot, which should not
be invoked directly.
o Commented out capabilities entries are included for some checks.
o Update most inter-process authorization to make use of p_can() instead
of manual checks, PRISON_CHECK(), P_TRESPASS(), and
kern.ps_showallprocs.
o Modify suser{,_xxx} to use const arguments, as it no longer modifies
process flags due to the disabling of ASU.
o Modify some checks/errors in procfs so that ENOENT is returned instead
of ESRCH, further improving concealment of processes that should not
be visible to other processes. Also introduce new access checks to
improve hiding of processes for procfs_lookup(), procfs_getattr(),
procfs_readdir(). Correct a bug reported by bp concerning not
handling the CREATE case in procfs_lookup(). Remove volatile flag in
procfs that caused apparently spurious qualifier warnigns (approved by
bde).
o Add comment noting that ktrace() has not been updated, as its access
control checks are different from ptrace(), whereas they should
probably be the same. Further discussion should happen on this topic.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
the chgsbsize() call to use a "subject" pointer (&sb.sb_hiwat) and
a u_long target to set it to. The whole thing is splnet().
This fixes a problem that jdp has been able to provoke.
1) while allocating a uidinfo struct malloc is called with M_WAITOK,
it's possible that while asleep another process by the same user
could have woken up earlier and inserted an entry into the uid
hash table. Having redundant entries causes inconsistancies that
we can't handle.
fix: do a non-waiting malloc, and if that fails then do a blocking
malloc, after waking up check that no one else has inserted an entry
for us already.
2) Because many checks for sbsize were done as "test then set" in a non
atomic manner it was possible to exceed the limits put up via races.
fix: instead of querying the count then setting, we just attempt to
set the count and leave it up to the function to return success or
failure.
3) The uidinfo code was inlining and repeating, lookups and insertions
and deletions needed to be in their own functions for clarity.
Reviewed by: green
