the kern.polling.enable sysctl, remove the sysctl. It has been deprecated
since FreeBSD 6 in favour of per-ifnet polling flags.
Reviewed by: luigi
Approved by: re (kib)
things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
loader, because it uses a reserved suffix (_type). Fix
this by removing the "_" and renaming the tunable to
hw.mxge.rss_hashtype. The old (rss_hash_type) tunable is
still fetched, in case people load the driver via scripts.
When both are present in the kernel environment,
the new value (hw.mxge.rss_hashtype) overrides the old
value.
Approved by: re (kib)
Driver supports Serial ATA and ATAPI devices, Port Multipliers
(including FIS-based switching), hardware command queues (31 command
per port) and Native Command Queuing. This is probably the second on
popularity, after AHCI, type of SATA2 controllers, that benefits from
using CAM, because of hardware command queuing support.
Approved by: re (kib)
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
The default (64K) is too pessimistic for "new comm" hardware.
Also, this is bad because multiple controllers get limited by
the global tunable.
Reviewed by: scottl
Approved by: re (kensmith)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin <freebsdusb at bindone.de>
Approved by: re (kib)
MFC after: 2 weeks
via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2)
calls treat the data field of the argument struct passed as a mask
and set/clear bits of the MSR register according to the mask value.
- Allow user to perform atomic bitwise AND and OR operaions on MSR registers
via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been
added. The first one applies bitwise AND operaion between the current
contents of the MSR register and the mask, and the second performs bitwise
OR. The argument can be optionally prefixed with "~" inversion operator.
This allows one to mimic the "clear bit" behavior by using the command
like this:
cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR
Inversion operator support in all modes (assignment, OR, AND).
Approved by: re (kib)
MFC after: 1 month
- Document different semantics for ACPI_WMI_PROVIDES_GUID_STRING_METHOD
acpi_wmi.c:
- Modify acpi_wmi_provides_guid_string_method to return absolut number of
instances known for the given GUID.
acpi_hp.c:
- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin, freebsdusb at bindone.de
Approved by: re (kib)
MFC after: 2 weeks
based on the information at The Unix Historical Society web page
(http://www.tuhs.org/Unix_History). Where multiple sources differ,
retain all data. Prefer 2.79BSD to 2.7.9BSD, since the former is from
/LABEL form the actual release. Use the /LABEL date as in the TUHS
tables (the curious can read http://minnie.tuhs.org/Unix_History/2bsd
for all the conflicting date confusion if they want).
Approved by: re@
insisting on privileged port access.
Include /var/yp/Makefile.local if it exists and suggest using
it to override /var/yp/Makefile behaviour.
Approved by: re (kib)
MFC after: 3 weeks
Import if_epair(4), a virtual cross-over Ethernet-like interface pair.
Note these files are 1:1 from p4 and not yet connected to the build
not knowing about the new netisr interface.
Sponsored by: The FreeBSD Foundation
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
* Driver for ACPI HP extra functionations, which required
ACPI WMI driver.
Submitted by: Michael <freebsdusb at bindone.de>
Approved by: re
MFC after: 2 weeks
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
we were not able to change c_fmt without breaking these utilities. Since
ache fixed all known issues 8 years ago, now we make ko_KR more usable.
Better late than never...
queue was drained. It will never fire for a directly dispatched packet.
You will most likely never want to use this for any ordinary netisr usage
and you will never blame netisr in case you try to use it and it does
not work as expected.
Reviewed by: rwatson
in /etc/termcap:
VT100 spec indicates that passthrough printing can be enabled
by sending ESC[5i and disabled by sending ESC[4i These entries
should be listed as po and pf in /etc/termcap, but are absent.
See http://www.vt100.net/docs/vt102-ug/chapter5.html#S5.5.2.23
PR: conf/71549
Submitted by: Andrew Webster <andrew@pubnix.net>
MFC after: 1 week
Although the PR contains also the definitions of the Wyse 60, they
are not copied into it since there are already definition for them
in the termcap file since 1997.
Also, the PR didn't use the :tc=xxx: feature, so I've imploded them.
PR: conf/81882
Submitted by: Meister des Chaos <meister@netz00.com>
MFC after: 1 week
The termcap database does not have an entry for rxvt-unicode.
This means that programs that need an entry such as vi fail
to work when connecting via ssh using this terminal emulator.
The added data is not the same as the PR submitted by Richard, it
uses the :tc=xxx: option to inherit everything from rxvt-mono.
PR: conf/117323
Submitted by: Richard Bradshaw <richard.bradshaw@blueyonder.co.uk>
MFC after: 1 week
There is a minor typo in the cons25l7 (':' instead of '|') entry
in src/etc/termcap.small that causes syscons to complain about
bogus characters in /etc/termcap.db.
PR: conf/132777
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr>
MFC after: 1 week
and ja_JP.SJIS locale
The iswprint() function does not return non-zero if used for
some wide-character that it code was 0x824f-0x8258 on ja_JP.SJIS
and 0xa3b0-0xa3b9 on ja_JP.eucJP locale. But those are right
Japanese wide-character code.
PR: conf/124511
Submitted by: Michihiro NAKAJIMA <ggcueroad@gmail.com>
MFC after: 1 week
addition: danish syscons keymap with accents
There are two danish keymap files shipping with FreeBSD:
danish.iso.kbd and danish.cp865.kbd. None of these support
accents by use of dead keys, which isn't crucial to Danes but
often used. This is a new keymap, danish.iso.acc.kbd, that's
based on danish.iso.kbd with the accent part taken from
german.iso.acc.kbd.
pl_PL.dvorak keymap for syscons.
Polish dvorak keymap by Robert Sebastian Gerus (17:05 01-07-2006
CEST) <arachnist@gmail.com>. Based on pl_PL.ISO-8859-2 and
us.dvorak keymaps.
British English Dvorak keymap for syscons.
Attached is a Dvorak keymap for British English, with a
pound-sterling symbol on on Shift-3 and some other characters
in different places to the US Dvorak keymap. I've based the
layout on the X.org GB keymap, Dvorak variant.
PR: conf/72978, kern/99692, conf/117257
Submitted by: Kim Norgaard <jasen@jasen.dk>, Robert Sebastian Gerus <arachnist@gmail.com>, "Benjamin A'Lee" <bma@subvert.org.uk>
MFC after: 1 week
French translations for keyboards keymaps descriptions with
some corrections on existing translations in the
/usr/share/syscons/keymaps/INDEX.keymaps
PR: conf/71767
Submitted by: Henri Michelon <hmichelon@e-cml.org>
MFC after: 1 week
Without this patch /usr/share/locale/hr_HR.ISO8859-2/LC_COLLATE
is a link to the ../la_LN.ISO8859-2/LC_COLLATE. It means
that there is no support for Croatian locale.
PR: conf/120113
Submitted by: Simun Mikecin <numisemis@yahoo.com>
MFC after: 1 week
Catalan language is not only spoken in Spain (ca_ES), but also
in Andorra, France and Italy. In Andorra it is the official
language.
(see http://en.wikipedia.org/wiki/Catalan_language#Geographic_distribution)
Add a bunch of symlinks to between ca_ES and ca_AD, ca_FR and ca_IT.
PR: conf/92541
Submitted by: <rmh@io.debian.net>
MFC after: 1 week
With the de_CH (swiss german) locale, numbers should look like this:
numbers: 1'234.45
monetary values: Fr. 1'234.45
Previously, the thousands separator was missing for numbers, and
"." for monetary values, and "," was incorrectly used as decimal
point.
PR: conf/75502
Submitted by: Benjamin Lutz <benlutz@datacomm.ch>
MFC after: 1 week
probe. The current device order is unchanged. This commit just adds the
infrastructure and ABI changes so that it is easier to merge later changes
into 8.x.
- Driver attachments now have an associated pass level. Attachments are
not allowed to probe or attach to drivers until the system-wide pass level
is >= the attachment's pass level. By default driver attachments use the
"last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during
an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which
accepts the pass level as an additional parameter.
- A new method BUS_NEW_PASS has been added to the bus interface. This
method is invoked when the system-wide pass level is changed to kick off
a rescan of the device tree so that drivers that have just been made
"eligible" can probe and attach.
- The bus_generic_new_pass() function provides a default implementation of
BUS_NEW_PASS(). It first allows drivers that were just made eligible for
this pass to identify new child devices. Then it propogates the rescan to
child devices that already have an attached driver by invoking their
BUS_NEW_PASS() method. It also reprobes devices without a driver.
- BUS_PROBE_NOMATCH() is only invoked for devices that do not have
an attached driver after being scanned during the final pass.
- The bus_set_pass() function is used during boot to raise the pass level.
Currently it is only called once during root_bus_configure() to raise
the pass level to BUS_PASS_DEFAULT. This has the effect of probing all
devices in a single pass identical to previous behavior.
Reviewed by: imp
Approved by: re (kib)
From the submitter:
DIN 5008 (German norm for text processing) defines the old date
format (%d.%m.%Y) to be obsolete and to be used only, if unambigous.
In international communications the new format (%Y-%m-%d) is now
required and FreeBSD should respect this.
References:
- DIN 5008
- EN 28 601
- ISO 8601
Thanks to Oliver Lietz for bringing this to my attention.
PR: conf/72076
Submitted by: Peter Wullinger <some-mail-drop@gmx.net>
MFC after: 1 week
version field sent via gif(4)+if_bridge(4). The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
with reversed version field, if enabled. If disabled, the gif
accepts the correct packets only. This flag is enabled by
default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field
intentionally, if enabled. If disabled, the gif sends the correct
packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older
FreeBSD releases. If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.
Reviewed by: thompsa and rwatson
Spotted by: Shunsuke SHINOMIYA
PR: kern/125003
MFC after: 2 weeks
the number of days between backups. All it says is frequency, with no
units given. It likely should say "the interval in days between backups"
instead, but not today.
In Portuguese, the names of the days of the week are not capitalized.
Also there is always a dash before "feira" in the names of the days.
For example: "segunda-feira" and not "segunda feira" (which has a
completely different meaning).
x_fmt is not correct either. The date separator should not be a dot
but a slash. Example: 31/12/2005 if far more used in Portugal than
31.12.2005.
References:
- a Portuguese online dictionary http://priberam.pt/dlpo/dlpo.aspx
- http://answers.com/days_of_the_week (there are translations to
various languages, including Portuguese, at the bottom of the
page)
- http://en.wikipedia.org/wiki/Week-day_names (there are translations
to various languages, including Portuguese, at the bottom of the
page)
- a Portuguese style guide
http://www.publico.clix.pt/nos/livro_estilo/16d-palavras.html
("datas" section)
PR: conf/58595
Submitted by: Chris Stenton <jacs@gnome.co.uk>
MFC after: 1 week
Each list describes a logical memory object that is backed by one or more
physical address ranges. To minimize locking, the sglist objects
themselves are immutable once they are shared.
These objects may be used in the future to facilitate I/O requests using
physically-addressed buffers. For the immediate future I plan to use them
to implement a new type of VM object and pager.
Reviewed by: jeff, scottl
MFC after: 1 month
We will look at renaming stuff for 9.0, but it's far from certain that we
will do it this way.
- Sort sysctl's alphabetically. I'll add a bunch of new sysctl's once
ariff's next mega-patch goes in, and having everything sorted makes my
job easier.
