Commit Graph

12224 Commits

Author SHA1 Message Date
Warner Losh
fd492ee0e6 Make the lower range of the memory area 0x80000000 again. Also
introduce hw.{pci,acpi}.host_mem_start tunable to change this.

MFC: ASAP
2004-10-11 21:10:23 +00:00
Nate Lawson
8909901fdd Add acpi attachments for ISA sound drivers. This is needed so they'll
probe and attach when ACPI is enabled.

Submitted by:	takawata (sbc fix)
MFC after:	1 day
2004-10-11 19:52:31 +00:00
Nate Lawson
a0885d3f14 Notify the user when the battery is critically low. In the future, we
may want to shut down here but the chance of BIOS vendors getting this
wrong is high.  They're only supposed to announce this when all batteries
hit their critical level but past experience indicates we should be
conservative about this for now.
2004-10-11 06:18:07 +00:00
Nate Lawson
18ececa0b8 If bus mastering control is not available (PM2_BLK), don't just disable
C3.  Instead, flush caches before entering C3.  This may be slower but
provides good power savings.
2004-10-11 06:06:42 +00:00
Nate Lawson
31ad3b8802 Move the code for halting the CPU (acpi_cpu_c1) into machdep files.
This removes the last MD portion of acpi_cpu.c.

MFC after:	2 weeks
2004-10-11 05:39:15 +00:00
Warner Losh
905454c86c Fix conflicts I didn't fix before I committed my busspace changes.
Noticed by: ru@ (and likely tinderbox, I haven't checked)
2004-10-11 00:58:24 +00:00
Peter Edwards
8fe457d687 Fix off-by-one error in fd_native_types that results in a panic on boot
for machines with 2.88M floppies.

Reviewed By: phk
2004-10-10 23:39:59 +00:00
Søren Schmidt
b913aa0b7f Dont sleep with lock held. 2004-10-10 13:24:39 +00:00
Warner Losh
ac00fac23a Convert to newbus. (chances are we could now move this to dev/pbio
since I believe it is now MI, but that hasn't been done yet).

Reviewed by: dds
2004-10-10 03:26:20 +00:00
Robert Watson
a28ce935d9 Modify entropy harvesting locking strategy:
- Trade off granularity to reduce overhead, since the current model
  doesn't appear to reduce contention substantially: move to a single
  harvest mutex protecting harvesting queues, rather than one mutex
  per source plus a mutex for the free list.

- Reduce mutex operations in a harvesting event to 2 from 4, and
  maintain lockless read to avoid mutex operations if the queue is
  full.

- When reaping harvested entries from the queue, move all entries from
  the queue at once, and when done with them, insert them all into a
  thread-local queue for processing; then insert them all into the
  empty fifo at once.  This reduces O(4n) mutex operations to O(2)
  mutex operations per wakeup.

In the future, we may want to look at re-introducing granularity,
although perhaps at the granularity of the source rather than the
source class; both the new and old strategies would cause contention
between different instances of the same source (i.e., multiple
network interfaces).

Reviewed by:	markm
2004-10-09 22:04:13 +00:00
Søren Schmidt
8353d82bfd Add support for the ICH6 in legacy mode.
The AHCI part is not supported yet, but is in the works.

5.3 RC1 candidate
2004-10-09 16:27:13 +00:00
David E. O'Brien
3b33d41dc2 style(9) 2004-10-09 08:31:21 +00:00
Takanori Watanabe
42d69dd63e Don't use matchlvl attach arg. It seems to be not initialized
in FreeBSD probe mechanism.
2004-10-09 07:48:31 +00:00
Pyun YongHyeon
e60fc88fa6 Port NetBSD auxio driver. The driver was modified to use led(4) and can
be used to announce various system activity.
The auxio device provides auxiliary I/O functions and is found on various
SBus/EBus UltraSPARC models. At present, only front panel LED is
controlled by this driver.

Approved by:    jake (mentor)
Reviewed by:    joerg
Tested by:      joerg
2004-10-09 07:31:03 +00:00
Scott Long
2f93f011ec Don't count RNBC (internal buffer full) towards the RX error count since it's
not really an error.

Submitted by: Gerrit Nagelhout
2004-10-09 07:27:03 +00:00
Nate Lawson
4f8c4e4d53 Update a quirk for the ASUS P5A to disable the timer. It appears to work fine
with acpi but the timer runs twice as fast.  Note that the main problem
(system doesn't work properly with acpi disabled) should be fixed separately.

Changes:
* Add a quirk to disable the timer
* Merge the P5A and P5A-B quirks since they appear to be based on the
  same ASL.

PR:		i386/72450
Tested by:	Kevin Oberman <oberman es.net>
MFC after:	3 days
2004-10-08 17:56:47 +00:00
Max Laier
22d0ab2ef8 Fix sis, bfe and ndis in the same way dc was fixed:
Do not tell the hardware to send when there were no packets enqueued.

Found and reviewed by:	green
MFC after:		1 days
2004-10-08 16:14:42 +00:00
Poul-Henning Kamp
e3240372a7 Use generic tty processing code instead of local copy.
New device names are {tty,cua}G$(adapter)$(port)[.lock,.init]
2004-10-08 06:45:10 +00:00
Bruce M Simpson
736e35999e Style. Use ETHER_IS_MULTICAST() appropriately instead of masking off the bit.
Reviewed by:	jmallett
2004-10-07 20:56:29 +00:00
Søren Schmidt
6c35773729 Move the PC98 specific geometry "gunk" to geom_pc98.c where it belongs.
This also adds support for bigger disks on the controller I have access to,
and maybe others if I understood the adhoc methods used on those.

Those with more PC98 bigdrive controllers it is hereby invited to add/fix
support for those in geom_pc98.c and not using #ifdef PC98 all over the place.
2004-10-07 17:37:09 +00:00
Warner Losh
bacb482d94 Port pbio to HEAD.
OK'd by: dds
2004-10-07 16:21:03 +00:00
Søren Schmidt
e59142714c Add SHARP to the pool of drives that doesn not need byteswapping of
the model etc fields from identify.
2004-10-07 11:43:25 +00:00
Poul-Henning Kamp
e7e1338d36 Use generic ttycode instead of local copy. 2004-10-07 06:19:11 +00:00
Poul-Henning Kamp
3a5f9a2bd2 Use generic tty code instead of local copies. 2004-10-06 20:01:49 +00:00
Søren Schmidt
6192895db8 Fix the PC98 lockups on boot.
The interchannel locking for PC98 needed to be updated to match the
rest of the locking in ATA.
2004-10-06 19:46:08 +00:00
Warner Losh
5cee9db399 For older systems with ACPI which don't have a pci <-> pci bridge,
allocate unallocated memory resources from the top 32MB of the address
space rather than the top 2GB.  While the latter works on some
chipsets, it fails badly on others.  32MB is more conservative and
matches what cheap harware from this era is hardwired to pass.
2004-10-06 07:26:52 +00:00
Nate Lawson
67e87637df When the user overrides the DSDT, replace any SSDTs with a simple no-op
table.  acpidump(8) concatenates the body of the DSDT and SSDTs so an
edited ASL will contain all the necessary information.  We can't use a
completely empty table since ACPI-CA reports this as a problem.

MFC after:	3 days
2004-10-05 20:41:44 +00:00
Poul-Henning Kamp
e742b4f879 Use generic tty code instead of local copy.
Also divorce this driver from the sio driver.
2004-10-05 07:42:19 +00:00
Warner Losh
534e7194f8 Yet another case of resources:
+        * 9:   0x3f0-0x3f3,0x3f4-0x3f5,0x3f7

This requires only one change to support.  Rather than keying on the
size of the resource being 2, instead key off the end & 7 being 3.
This covers the same cases that the size of 2 would catch, but also
covers the new above case.

In addition, I think it is clearer to use the end in preference to the
size and start for case #8 as well.  Turns two tests into one, and
catches no other cases.

Make minor commentary changes to deal with new case #9.

# This change is specifically minimal to allow easy MFC.  A more
# extensive change will go into current once I've had a chance to test
# it on a lot of hardware...
2004-10-05 07:18:11 +00:00
Eric Anholt
161cb1a5c6 Add PCI ID for VIA K8T800Pro chipset. Tested with agptest and X with DRI
enabled, but not 3D.
2004-10-05 04:40:32 +00:00
Scott Long
8aebfc9c7e Use a taskqueue rather than an swi to handle deferred notifications. 2004-10-05 04:03:00 +00:00
Poul-Henning Kamp
0d0d73e427 Use tty layer generic code instead of local copy.
Device names {cua,tty}R%r[.init,.lock] clashes with pty(4) driver
and allows for only 32 ports.  This should probably be revisited.
2004-10-04 09:38:53 +00:00
Stefan Farfeleder
c8c529b86f The macro for the function specifier inline is spelled '__inline'. 2004-10-03 16:12:29 +00:00
Stefan Farfeleder
b3fc3d57e5 Use the correct type for iop_attach(). 2004-10-03 16:06:46 +00:00
MIHIRA Sanpei Yoshiro
e1135559d2 Add device ID for atuwi USB wlan driver,
(Atmel at76c503a http://vitsch.net/bsd/atuwi)
	o AINCOMM AWU2000B
	o ATMEL WL1130USB

PR:		kern/72195
Submitted by:	Daan Vreeken [PA4DAN] <Danovitsch@Vitsch.net>
MFC after:	1 week
2004-10-03 09:30:09 +00:00
Brian Feldman
96ee6195ef * Use two cdevsw's for ugen(4): one for control endpoints, and one for
data endpoints.  The control endpoint doesn't need read/write/poll
  operations, and more importantly, the thread counts should be
  separate so that the control endpoint can properly reference itself
  while deleting and recreating the data endpoints.
* Add some macros that handle referencing/releasing devices, and use them
  for sleeping/woken-up and open/close operations as apppropriate.
* Use d_purge for FreeBSD, and a loop testing the open status for all
  the endpoints for NetBSD and OpenBSD, so that when the device is
  detached, the right thing always happens.
2004-10-02 22:49:54 +00:00
Brian Feldman
df3d6ec928 * When toggling short transfers on a bulk transfer endpoint, cancel and
restart the current waiting transfer.  If this isn't done, the device's
  next transfer (that we would like to do a short read on) is going to
  return an error -- for short transfer.
* For bulk transfer endpoints, restore the maximum transfer length each
  time a transfer is done, or the first short transfer will make all the
  rest that size or smaller.
* Remove impossibilities (malloc(M_WAITOK) == NULL, &var == NULL).
2004-10-02 22:33:26 +00:00
Poul-Henning Kamp
80e6a01a9a Add #ifdef _KERNEL which allows sicontrol(8) to include this file
from userland to get the debugging definitions.
2004-10-02 18:49:29 +00:00
Poul-Henning Kamp
aefadae38e Use generic device/tty adaptation code.
New device names are "{tty|cua}A$(card)$(port)[.init|.lock]"

Put a portname in the port structure if SI_DEBUG is defined to avoid
need to inspect minor number to construct name..

Constify some strings.

Remove duplicated DBG_ #defines.
2004-10-02 16:56:08 +00:00
Poul-Henning Kamp
d5bd33eeac Add support for CTS modemsignal as well.
RI does not seem to be supported.
2004-10-02 12:47:30 +00:00
Maxime Henrion
8c7ff1f331 Read the MAC address in the EEPROM in the correct byte order. This
is a no-op on little endian architectures, but fixes getting the MAC
address for some dc(4) cards on big endian architectures.

This is a RELENG_5 candidate.

Tested by:	gallatin (powerpc), marius (sparc64)
First version of the patch written by:	gallatin
2004-10-01 15:23:31 +00:00
Søren Schmidt
844acbc7a3 Always set half'n'half mode on ICH* chips. 2004-10-01 09:06:22 +00:00
Søren Schmidt
49686bbcaf Fix the serverworks modesetting code, of mask offset was wrong. 2004-10-01 09:04:53 +00:00
Brian Feldman
cbaf877f7d Add ALTQ support for dc(4), based upon a mostly-working patch from mlaier. 2004-10-01 07:04:09 +00:00
Brian Feldman
3d57a2e58e Conditionalize IFF_NEEDSGIANT, like everything else here, on IS_MPSAFE.
The driver doesn't look any less safe without Giant than with, and works
with IS_MPSAFE set to 1 here, so others should probably test it as such.
2004-10-01 07:01:38 +00:00
Søren Schmidt
8f0fb9584e Resurrect dump that broke with the last update. 2004-09-30 20:54:59 +00:00
Peter Wemm
12bdf8d107 Remove extra */
Submitted by: Manfred Antar <null@pozo.com>
2004-09-30 02:13:42 +00:00
Philip Paeps
34ed91b45b Introduce a tunable to disable support for Synaptics touchpads. A number of
people have reported problems (stickyness, aiming difficulty) which is proving
difficult to fix, so this will default to disable until sometime after 5.3R.

To enable Synaptics support, set the 'hw.psm.synaptics_support=1' tunable.

MT5 candidate.

Approved by:	njl
2004-09-29 23:49:57 +00:00
Jacques Vidrine
e618ea0cdb Disallow negative coordinates and sizes in the syscons CONS_SCRSHOT
ioctl.

Reported by:	Christer Oberg <christer.oberg@deprotect.com>
2004-09-29 21:36:07 +00:00
John Baldwin
30b490009b Only fall back to probing the floppy drives via hints if there is a failure
in the actual _FDE parsing.  If the failure occurs earlier such as in
fdc_attach() then don't try to probe any drives.

MFC after:	3 days
Reviewed by:	njl
Tested by:	Christian Laursen xi at borderworlds dot dk
2004-09-29 19:08:34 +00:00