asks that each buffer be (2048 * 256) bytes long. I suspect that alignment
isn't a real requirement since busdma only recently started honoring it. The
size is also bogus. Fix both of these and stop busdma from trying to
exhaust the system memory pool with bounce pages.
Submitted by: Kevin Oberman
MFC After: 7 days
- Fix a bug in the same condition where we forgot to drop the ACPI pcib
lock. This fixes hangs after the pcib0 attach on some machines.
Tested by: sos (2)
SIGPIPE signal for the duration of the sento-family syscalls. Use it to
replace previously added hack in Linux layer based on temporarily setting
SO_NOSIGPIPE flag.
Suggested by: alfred
Add support for passing in a mutex. If NULL is passed a global
subr_unit mutex is used.
Add alloc_unrl() which expects the mutex to be held.
Allocating a unit will never sleep as it does not need to allocate
memory.
Cut possible range in half so we can use -1 to mean "out of number".
Collapse first and last runs into the head by means of counters.
This saves memory in the common case(s).
ever working correctly: the code was linking the QHs together but
then immediately overwriting the "next" pointers. Oops. Also
initialise qh_endphub, since the EHCI spec says that we should
always set the pipe multiplier field to something sensible.
This appears to make basic split transactions work, so enable split
transactions for control, bulk and interrupt pipes (split isochronous
transfers are not yet implemented). It should now be possible to
use USB1 devices even when they are connected through a USB2 hub.
seem to be necessary anymore, and it prevents tasting a valid drive
when booting with geom_vinum already loaded, since SCSI disks set their
sectorsize not until first opening them.
from an mbuf into the fxp_encap() function, as done in other drivers.
- Don't waste time calling bus_dmamap_load_mbuf() if we know the mbuf
chain is too long to fit in a TX descriptor, call m_defrag() first.
- Convert fxp(4) to use bus_dmamap_load_mbuf_sg().
for the duration of the send() call. Such approach may be less than ideal
in threading environment, when several threads share the same socket and it
might happen that several of them are calling linux_send() at the same time
with and without SO_NOSIGPIPE set.
However, such race condition is very unlikely in practice, therefore this
change provides practical improvement compared to the previous behaviour.
PR: kern/76426
Submitted by: Steven Hartland <killing@multiplay.co.uk>
MFC after: 3 days
at some point result in a status event being triggered (it should
be a link down event: the Microsoft driver design guide says you
should generate one when the NIC is initialized). Some drivers
generate the event during MiniportInitialize(), such that by the
time MiniportInitialize() completes, the NIC is ready to go. But
some drivers, in particular the ones for Atheros wireless NICs,
don't generate the event until after a device interrupt occurs
at some point after MiniportInitialize() has completed.
The gotcha is that you have to wait until the link status event
occurs one way or the other before you try to fiddle with any
settings (ssid, channel, etc...). For the drivers that set the
event sycnhronously this isn't a problem, but for the others
we have to pause after calling ndis_init_nic() and wait for the event
to arrive before continuing. Failing to wait can cause big trouble:
on my SMP system, calling ndis_setstate_80211() after ndis_init_nic()
completes, but _before_ the link event arrives, will lock up or
reset the system.
What we do now is check to see if a link event arrived while
ndis_init_nic() was running, and if it didn't we msleep() until
it does.
Along the way, I discovered a few other problems:
- Defered procedure calls run at PASSIVE_LEVEL, not DISPATCH_LEVEL.
ntoskrnl_run_dpc() has been fixed accordingly. (I read the documentation
wrong.)
- Similarly, the NDIS interrupt handler, which is essentially a
DPC, also doesn't need to run at DISPATCH_LEVEL. ndis_intrtask()
has been fixed accordingly.
- MiniportQueryInformation() and MiniportSetInformation() run at
DISPATCH_LEVEL, and each request must complete before another
can be submitted. ndis_get_info() and ndis_set_info() have been
fixed accordingly.
- Turned the sleep lock that guards the NDIS thread job list into
a spin lock. We never do anything with this lock held except manage
the job list (no other locks are held), so it's safe to do this,
and it's possible that ndis_sched() and ndis_unsched() can be
called from DISPATCH_LEVEL, so using a sleep lock here is
semantically incorrect. Also updated subr_witness.c to add the
lock to the order list.
- "options" is followed by the characters \040\011, not \011\011.
Correct both my own sins and those of others.
- Comment blocks start and end with an empty line ^#$.
- Remove non-standard comments added in my last commit.
Requested by: njl
Correctness confirmed by: bde
since there are often significant holes in the memory map due to the
kernel, loader and OFW data structures not being included: Maxmem is
the highest available, so can be misleading.
them all, otherwise the driver will be useless and will only confuse user
as manual page says nothing about the need to enable one of those frame
types explicitly in the kernel config.
PR: kern/47152
Submitted by: Andriy Gapon <avg@icyb.net.ua>
MFC after: 3 days
as we can't rely on a trap happening, as it is done normally.
While I'm there, uncomment the call to cpu_dcache_wbinv_range() in
pmap_kenter_internal, as we don't call cpu_dcache_wbinv_all() there anymore.
asynchronously by different threads. Thus, declare as volatile the
reference count that is accessed through m_ext's pointer, ref_cnt.
Revert the previous change, revision 1.144, that casts as volatile a
single dereference of ref_cnt.
Reviewed by: bmilekic, dwhite
Problem reported by: kris
MFC after: 3 days
for a signal, because kernel stack is swappable, this causes page fault
in kernel under heavy swapping case. Fix this bug by eliminating unneeded
code.
Change fhc(4) to use IRQ numbers instead of RIDs for allocating the
IRQs of children. This works similar to e.g. sbus(4), i.e. add the
IRQ resources as fully specified to the resource lists of the children,
allocate them like normal. When establishing the interrupt search the
interrupt maps of the children for a matching INO to determine which
map we need to write the fully specified interrupt number to and to
enable the mapping (before the RID was used to indicate which interrupt
map to use).
- dev/puc/puc.c:
Revert rev. 1.38, with the above change fhc(4) no longer needs special
treatment for allocating IRQs.
Thanks to: joerg for providing access to an E3500
modulating the STPCLK# pin based on the duty cycle. Since p4tcc uses the
same mechanism (but internal to the CPU), we triggered a hang on some
systems at low frequencies when both were in use. Now, disable
acpi_throttle when p4tcc is also present.
Tested by: Kevin Oberman
- Use FBSDID.
- Remove unused macro.
- Use auto-generated typedefs for the prototypes of the bus and device
interface functions.
- Terminate the output of device_printf(9) with a newline char.
- Honour the return values of malloc(), OF_getprop(), etc.
- Use __func__ instead of hardcoded function names.
- Print the physical slot number and the board model on attach.
MFC after: 1 month
- Use FBSDID.
- Remove an unused include.
- Use auto-generated typedefs for the prototypes of the device interface
functions.
- Terminate the output of device_printf(9) with a newline char.
- Honour the return value of malloc(3).
MFC after: 1 month
with no associated data. Also revert previous changes that allocate off
of the stack instead of using malloc, as it's not needed. Many thanks to
LSI for investigating and fixing these problems.
Submitted by: rajeshpr @ lsil . com
panic with the NDISulator if you did "ifconfig ndis0 10.0.0.1/24,"
whereas "ifconfig ndis0 10.0.0.1/24 up" worked fine. The double fault
was caused by the ifconfig thread running out of kernel stack space.
(This was partly due to the NDIsulator using a couple of big buffers on
the stack, but even after fixing that the double fault persisted.)
It turns out that ndis_init() is called in both cases, but in the first
case the code path passes through ieee80211_ioctl(), and it turns out
ieee80211_ioctl() consumes a whopping 2400 bytes of stack space.
Apparently, gcc -O2 causes the ieee80211_ioctl_get80211() routine to
be inlined into ieee80211_ioctl(), and for some reason which I do not
fully understand, this causes ieee80211_ioctl() to consume an extra 2K
of stack space.
To prevent this overly agressive optimization, ieee80211_ioctl_get80211()
is now declared with __attribute__ ((noinline)). With this change,
ieee80211_ioctl() now only reserves about 200 bytes of stack instead of 2400.
create kernel threads and call rfork(2) with RFTHREAD flag set in this case,
which puts parent and child into the same threading group. As a result
all threads that belong to the same program end up in the same threading
group.
This is similar to what linuxthreads port does, though in this case we don't
have a luxury of having access to the source code and there is no definite
way to differentiate linux_clone() called for threading purposes from other
uses, so that we have to resort to heuristics.
Allow SIGTHR to be delivered between all processes in the same threading
group previously it has been blocked for s[ug]id processes.
This also should improve locking of the same file descriptor from different
threads in programs running under linux compat layer.
PR: kern/72922
Reported by: Andriy Gapon <avg@icyb.net.ua>
Idea suggested by: rwatson
precision when IP packet may travel through internet for several seconds.
Also uptime measured in milliseconds overflows every 48+ days.
But we have to do same to keep compatibility with Cisco and flow-tools.
Make a macro MILLIUPTIME, which does overflowable multiplication to 1000.
Requested by: Sergey Ryabin, Oleg Bulyzhin
MFC after: 1 week
both consuming 1K of stack space. This is unfriendly. Allocate the buffers
off the heap instead. It's a little slower, but these aren't performance
critical routines.
Also, add a spinlock to NdisAllocatePacketPool(), NdisAllocatePacket(),
NdisFreePacketPool() and NdisFreePacket(). The pool is maintained as a
linked list. I don't know for a fact that it can be corrupted, but why
take chances.
a libalias application (e.g. natd, ppp, etc.) to crash. Note: Skinny support
is not enabled in natd or ppp by default.
Approved by: secteam (nectar)
MFC after: 1 day
Secuiryt: This fixes a remote DoS exploit
call vector which was added in rev. 1.52. This change was done way before
sparc64 switched to a 64-bit time_t so all binaries are expected to have
been recompiled by now.
aid for ABI breakages caused by system call changes. These changes were
done way before sparc64 switched to a 64-bit time_t so all binaries are
expected to have been recompiled by now.
a vlan interface attached to a fxp(4) card when it has not been
initialized yet. We now set the links from our internel TX descriptor
structure to the TX command blocks at attach time rather than at init
time. While I'm here, slightly improve the style in fxp_attach().
PR: kern/78112
Reported by: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> and others
Tested by: flz, Gavin Atkinson <gavin.atkinson@ury.york.ac.uk>
MFC after: 1 week
place.
This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.
By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild. Extension to other compilers is supposed
to be possible, of course.
Submitted by: netchild
Reviewed by: various developers on arch@, some time ago
We need to be able to test for the (possible) non-existence of the
FPSWA code.
PR: ia64/77591
Submitted by: Christian Kandeler (christian dot kandeler at hob dot de)
MFC after: 1 day
set the interrupt handler to be INTR_MPSAFE now that xpt_done() can be
called without Giant. Giant is still on the top half of the driver and
the timeout handlers.
timer case:
- Remove the virtual fooclock interrupt counters as they have served their
purpose.
- Adjust the dividers for the different clock such that profhz is now a
multiple of stathz as in the non-lapic case, and the timer now runs at
hz * 2 rather than hz * 3. With the new divisors, the default clock
rates are:
kern.clockrate: { hz = 1000, tick = 1000, profhz = 666, stathz = 133 }
sleeping, so in do_tdsignal, we no longer need to test td_waitset.
now td_waitset is only used to give a thread higher priority when
delivering signal to multithreads process.
This also fixes a bug:
when a thread in sigwait states was suspended and later resumed
by SIGCONT, it can no longer receive signals belong to waitset.
with shared IRQs in case the bus code, MD interrupt code, etc. permits.
Together with sys/sparc64/sparc64/intr_machdep.c rev. 1.21 this fixes
an endless loop in uart_intr() when using the second NS16550 on the ISA
bus of sparc64 machines.
- Destroy the hardware mutex on detach and in case attaching fails.
Approved by: marcel
for this are the on-board SCCs and UARTs that use a shared IRQ. [1]
- Rework the interrupt counting code to account for shared interrupts. [1]
- In case ithread_add_handler() failed in inthand_add() just return with
the error code instead of setting up a non-fast handler regardless or
setting up a non-fast handler instead of a fast handler. I can't think
of a situation where the former behaviour would do the right thing.
Reviewed by: marcel [1]
Based on: sys/i386/i386/intr_machdep.c [1]
- Use FBSDID.
- Use uintXX_t instead of u_intXX_t.
- Be consistent with white-space.
- Mark some globals as static.
- Add a missing prototype.
- Remove a unused variable.
- etc.
Failure to do this will result in following ata_pio_read() calls walking
off the end of the read buffer.
This resolves the "memory modified after free" panics common with Thinkpads
and CD/DVD drives.
Submitted by: Nate Lawson <nate AT root.org>
idle the 'mask' variable could be set to 0, resulting in the timeout loop
running for the full 31 seconds.
Handling this case eliminates long hangs on resume on some systems.
Submitted by: Nate Lawson <nate AT root.org>
and the X1034A (quad HME; QFE) cards the X1033A (single HME) don't have a
PCI-PCI-bridge so we can't rely on the PCI slot number being useable as
index for the network address to read from the VPD on the latter. Use
the end tag to determine whether it is a QFE VPD with 4 NAs and only use
the slot number as index in this case.
- Remove a useless check.
Prodded by: joerg
Additional testing by: joerg
MFC after: 1 day
malloc(sizeof(device_object), ...) by mistake. Correct this, and
rename "dobj" to "drv" to make it a bit clearer what this variable
is supposed to be.
Spotted by: Mikore Li at Sun dot comnospamplzkthx
attached to a parent interface we use its mutex to lock the softc. This
means that in several places like carp_ioctl() we lock softc conditionaly.
This should be redesigned.
To avoid LORs when MII announces us a link state change, we schedule
a quick callout and call carp_carpdev_state_locked() from it.
Initialize callouts using NET_CALLOUT_MPSAFE.
Sponsored by: Rambler
Reviewed by: mlaier
- In carp_send_ad_all() walk through list of all carp interfaces
instead of walking through list of all interfaces.
Sponsored by: Rambler
Reviewed by: mlaier
its return value and free resources if function returns error. Plug
several memory leaks with this change.
Submitted by: archie
Found by: Coverity Prevent analysis tool
o usb_subr.c, add delta 1.119:
Move usb_get_string() and make it public.
o usbdi.c, bring on par with 1.106, this includes:
- Make an iterator abstraction for looping through all descriptors.
- Whine about not being able to figure out default language if we are debugging.
- Move usb_get_string() and make it public.
o usbdi.h, bring on par with 1.64, this includes:
- Make an iterator abstraction for looping through all descriptors.
- Move usb_get_string() and make it public.
o usbdi_util.c, bring on par with 1.42, this includes:
- Add usbd_get_protocol().
- Use NULL instead of 0.
- Fix (mostly harmless) typo.
- Move utility routine from uirda.c to usbdi_util.c.
o usbdi_util.h, bring on par with 1.31, this includes:
- Add usbd_get_protocol().
- Move utility routine from uirda.c to usbdi_util.c.
MFC after: 3 days
is particularly useful when VESA is available (either `options VESA'
or load the vesa module), as BIOSes in some notebooks may correctly
save and restore LCD panel settings using VESA in cases where calling
the video BIOS POST is not effective. On some systems it may also
be necessary to set the hw.acpi.reset_video sysctl to 0.
Also save the DAC state, increase the maximum save state size from
4k to 8k, and refuse to save the VESA state if the BIOS reports it
is larger than the maximum size we can handle.
It doesn't appear that anything currently uses this code, but it
turns out to be capable of restoring some notebook displays to a
working state after a suspend-resume cycle.
if either INVARIANTS or INVARIANT_SUPPORT is defined so that kernel modules
that want to use mtx_assert() only need to define INVARIANTS.
MFC after: 1 week
