Platforms may either silently handle unaligned accesses or return an
error. Atomicity is not guaranteed in this case, however.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31282
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
This reapplies 3a522ba1bc with a fix for
the static assertion failure on i386.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
When not specifying the man page section the man page is set to 'LOCAL'
in the header of the page.
PR: 257145
Reviewed by: gbe
MFC after: 1 month (when the driver is MFC'ed)
This controller supports 2.5G/1G/100MB/10MB speeds, and allows
tx/rx checksum offload, TSO, LRO, and multi-queue operation.
The driver was derived from code contributed by Intel, and modified
by Netgate to fit into the iflib framework.
Thanks to Mike Karels for testing and feedback on the driver.
Reviewed by: bcr (manpages), kbowling, scottl, erj
MFC after: 1 month
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30668
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
Support loading a default pf ruleset in case of invalid pf.conf.
If no pf rules are loaded pf will pass/allow all traffic, assuming the
kernel is compiled without PF_DEFAULT_TO_DROP, as is the case in
GENERIC.
In other words: if there's a typo in the main pf_rules we would allow
all traffic. The new default rules minimise the impact of this.
If $pf_program (i.e. pfctl) fails to set $pf_fules and
$pf_fallback_rules_enable is YES we will load $pf_fallback_rules_file if
set, or $pf_fallback_rules.
$pf_fallback_rules can include multiple rules, for example to permit
traffic on a management interface.
$pf_fallback_rules_enable defaults to "NO", preserving historic behaviour.
man page changes by ceri@.
PR: 256410
Reviewed by: donner, kp
Sponsored by: semaphor.dk
Differential Revision: https://reviews.freebsd.org/D30791
Make it work, but change the interface to be safe for non-root users. In
particular, right now interface only works for the tables which can be
minimally parsed by kernel to determine the table size. Then, userspace can
query the table size, after that it provides a buffer of needed size
and kernel copies out just table to userspace.
Main advantage is that user no longer need to be able to read /dev/mem,
the disadvantage is the need to have minimal parsers aware of the table
types. Right now the parsers are implemented for ESRT and PROP tables.
Future extension of the present interface might be a return of only
the table physical address, in case kernel does not have suitable
parser yet. Then, a privileged user could read the table from /dev/mem.
This extension, which logically equivalent to the old (non-worked)
EFIIOC_GET_TABLE variant, is not implemented until needed.
Submitted by: Pavel Balaev <pavel.balaev@3mdeb.com>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30104
Refine mistakes from adaptaton of NetBSD's hardclock man page to
FreeBSD:
o clarify what usermode means
o clarify how often hardclock is called
o remove Xr callout(9) since that's done elsewhere
Reviewed by: mav@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30982
Update the stathz description to reflect reality. profhz is the only
thing we should deprecate. Add some implementation notes that describe
the optimizations made to date.
Discusssed with: emaste
Reviewed by: kib (prior), jhb (prior), gbe
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30815
Building and installing architecture-specific man pages only raises a number of
problems:
* The https://www.freebsd.org/cgi/man.cgi is incomplete. As an
example, it does not show results for pae(4). The reason for this is
that the cgi interface runs on FreeBSD amd64.
* In FreeBSD amd64 some manual pages have broken X-refs. See hptrr(4)
for an example.
* Also, we have broken links in our Release Notes. This is a
consequence of the first point. See
https://www.freebsd.org/releases/13.0R/hardware/#proc-i386.
Make MAN_ARCH default to 'all' so we build all the man pages for all the
architectures. The difference in disk space is negligible. Also link
architecture-specific man pages to their own section while keeping their own
namespace.
PR: 212290
Reported by: mj@bsdops.com
Approved by: ceri@, wosch@
MFC after: 4 weeks
Some TCP stacks negotiate TS support, but do not send TS at all
or not for keep-alive segments. Since this includes modern widely
deployed stacks, tolerate the violation of RFC 7323 per default.
Reviewed by: rgrimes, rrs, rscheff
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D30740
Sponsored by: Netflix, Inc.
Bring the obsolete man page up to date:
* update diagnostic error messages
* add documentation of loader tunables
* document netmap support
* add a driver history section
* update the contact information
Submitted by: Artur Rojek <ar@semihalf.com>
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
Stop confusing people, retire COMPAT_LINUX and COMPAT_LINUX32 kernel
build options. Since we have 32 and 64 bit Linux emulators, we can't build both
emulators together into the kernel. I don't think it matters, Linux emulation
depends on loadable modules (via rc).
Cut LINPROCFS and LINSYSFS for consistency.
PR: 215061
Reviewed by: bcr (manpages), trasz
Differential Revision: https://reviews.freebsd.org/D30751
MFC after: 2 weeks
Document aspects of system time keeping. Hz is the nominal rate that we
interrupt the system and is known and the 'tick' period of 1 / hz.
hardclock is the routine that does various bits of timekeeping. stathz
and profhz are documented as historical relics that are deprecated
and replaced by hwpmc.4 and others.
Reviewed by: phk@, mav@ and gnn@ (previous version)
Obtained from: hardclock.9 from NetBSD (with FreeBSD adjustments)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30802
Accept the old rc.conf variable if the new one is not present for
compatability.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D30806
Codify our standard practice with $FreeBSD$
o New code only needs it if it might land in stable/12
o Old code should retain it until stable/12 is unsupported
o We'll do a bulk remove in the future: don't do it proactively.
o Give advice about how to tag files derived from other files
in the tree.
Reviewed by: bcr, allanjude,ceri
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30789
Qualcomm makes the GOBI devices, and gobi_loader port supports all the
Qualcomm GOBI 1000 and 2000 devices with the MDM1000 and MDM2000
chipsets. And likely the 3000 as well, though that's not been tested
on FreeBSD.
Submitted by: zarychtam@plan-b.pwste.edu.pl
Sponsored by: Netflix
The gobi_loader port has been committed. Add a reference to it instead
of the upstream project since the port has changes needed to run on
FreeBSD that aren't yet part of upstream.
Sponsored by: Netflix
Document that the u3g driver supports the Panasonic CF-F9 GOBI. Note
that gobi_loader is needed and give URL for that. There is a separate
review for during a related version into a port at D22938, but it seems
stalled. I'll update the docs when it arrives in ports.
Sponsored by: Netflix
In the CVS days this used be a wrapper around either CVS or CVSup and
used to support updating src, doc, and ports checkouts. With the move
to subversion this only supported updating src and was itself a
wrapper around 'svn update'. With Git, users are probably better off
using appropriate Git commands directly to update without needing an
explicit make target as a wrapper.
Reviewed by: bcr, imp, emaste
Differential Revision: https://reviews.freebsd.org/D30736
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30679
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
