Commit Graph

1032 Commits

Author SHA1 Message Date
John Baldwin
9a94c9c5c3 - Remove the inthand2_t type and use the equivalent driver_intr_t type from
newbus for referencing device interrupt handlers.
- Move the 'struct intrec' type which describes interrupt sources into
  sys/interrupt.h instead of making it just be a x86 structure.
- Don't create 'ithd' and 'intrec' typedefs, instead, just use 'struct ithd'
  and 'struct intrec'
- Move the code to translate new-bus interrupt flags into an interrupt thread
  priority out of the x86 nexus code and into a MI ithread_priority()
  function in sys/kern/kern_intr.c.
- Remove now-uneeded x86-specific headers from sys/dev/ata/ata-all.c and
  sys/pci/pci_compat.c.
2000-09-13 18:33:25 +00:00
John Baldwin
a0e1678488 Add a nasty hack to get remote kernel gdb working from ddb. ddb would
complain before that a suitable gdb port had not been setup because gdbdev
was NULL.  This abuses the fact that the gdb port is hard-coded to the
address normally assigned to sio1 and thus hard-codes in sio1 as the gdb
port.  Yuck.
2000-09-11 04:33:36 +00:00
John Baldwin
9c25701692 Back out my previous commit as well as some SMPng changes to revert the
siosetwater() function to its previous behavior of always disabling
interrupts and obtaining the com_lock before returning.

Requested by:	bde (in principle)
2000-09-08 08:50:25 +00:00
Greg Lehey
e45e88e8aa siointr1: Schedule soft interrupt when needed. This fixes the "no
interrupt" problem people had seen with SMPng.

Approved by:       jasone
Tested by:         bp
2000-09-08 06:58:58 +00:00
John Baldwin
60ee19d500 Fix a problem where we would recursively try to get the com lock within
comparam when calling siosetwater().

Noticed by:	bp
2000-09-08 00:35:46 +00:00
Jason Evans
0384fff8c5 Major update to the way synchronization is done in the kernel. Highlights
include:

* Mutual exclusion is used instead of spl*().  See mutex(9).  (Note: The
  alpha port is still in transition and currently uses both.)

* Per-CPU idle processes.

* Interrupts are run in their own separate kernel threads and can be
  preempted (i386 only).

Partially contributed by:	BSDi (BSD/OS)
Submissions by (at least):	cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Sheldon Hearn
bade5944c9 Add ZTIA001 - Zoom Internal V90 Faxmodem.
PR:		21028
Submitted by:	Glenn Johnson <glennpj@charter.net>
2000-09-05 09:42:47 +00:00
Sheldon Hearn
1eb283fdc2 Add Boca K56Flex PnP modem.
PR:		21000
Submitted by:	Andrew Sparrow <spadger@best.com>
2000-09-04 13:50:37 +00:00
Poul-Henning Kamp
db90128160 Avoid the modules madness I inadvertently introduced by making the
cloning infrastructure standard in kern_conf.  Modules are now
the same with or without devfs support.

If you need to detect if devfs is present, in modules or elsewhere,
check the integer variable "devfs_present".

This happily removes an ugly hack from kern/vfs_conf.c.

This forces a rename of the eventhandler and the standard clone
helper function.

Include <sys/eventhandler.h> in <sys/conf.h>: it's a helper #include
like <sys/queue.h>

Remove all #includes of opt_devfs.h they no longer matter.
2000-09-02 19:17:34 +00:00
Doug Rabson
21c3015a24 * Completely rewrite the alpha busspace to hide the implementation from
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
  which call busspace.
* Rework pci config accesses to route through the pcib device instead of
  calling a MD function directly.

With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Poul-Henning Kamp
62ddc84e08 Call destroy_dev() when sio devices go away. 2000-08-27 14:46:13 +00:00
Kazutaka YOKOTA
01819900ae Add spltty()/splx() in the watchdog timer routine. 2000-08-24 08:49:44 +00:00
Poul-Henning Kamp
3f54a085a6 Remove all traces of Julians DEVFS (incl from kern/subr_diskslice.c)
Remove old DEVFS support fields from dev_t.

  Make uid, gid & mode members of dev_t and set them in make_dev().

  Use correct uid, gid & mode in make_dev in disk minilayer.

  Add support for registering alias names for a dev_t using the
  new function make_dev_alias().  These will show up as symlinks
  in DEVFS.

  Use makedev() rather than make_dev() for MFSs magic devices to prevent
  DEVFS from noticing this abuse.

  Add a field for DEVFS inode number in dev_t.

  Add new DEVFS in fs/devfs.

  Add devfs cloning to:
        disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
        md(4), tun(4), bpf(4), fd(4)

  If DEVFS add -d flag to /sbin/inits args to make it mount devfs.

  Add commented out DEVFS to GENERIC
2000-08-20 21:34:39 +00:00
Peter Wemm
d7db4e569d Add another USR modem.
PR: 20621
Submitted by: Masanori Taira <mtaira@logicaleffect.com>
2000-08-15 21:03:28 +00:00
Nick Hibma
02211bae3b Avoid a '"fd" is usurping ...' message.
PR:		20348
Submitted by:	Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
2000-08-09 12:45:04 +00:00
Poul-Henning Kamp
0825a8a33f Allow use of TSC even if APM is compiled in but disabled. 2000-07-30 21:05:22 +00:00
Peter Wemm
58c9d62373 Fix a warning re: a potentially unused pccard helper function 2000-07-28 23:00:00 +00:00
Kazutaka YOKOTA
fc581b6bf6 Fix GENERIC_MOUSE_ENTRY.
Submitted by: Graham Wheeler <gram@cequrux.com> and gibbs
2000-07-28 03:48:46 +00:00
Kazutaka YOKOTA
7ce6464adc This is yet another attempt to fix "psmintr out of sync.." problems.
- Properly protect the watchdog timer routine.
- Relocate the sync check statement so that we don't see too many
  error messages.
2000-07-22 04:08:12 +00:00
Doug Rabson
ac7ba92669 Add support for the PC87303 chipset (found on Miata alphas) and add
support for relocating the port address if the isa hints specify a
different address from the address the chipset currently has.

Submitted by: Andrew M. Miklic <miklic@ibm.net>
2000-07-20 09:28:07 +00:00
Doug Rabson
6a5be8627c Add smc37c935 chipset support and clean up the code which tries to
allocate a short port range in some alpha configurations.

Submitted by: "Andrew M. Miklic" <miklic@udlkern.fc.hp.com>,
	      Mark Abene <phiber@radicalmedia.com>
2000-07-18 09:01:09 +00:00
John Baldwin
2b2b44c983 Don't assume that any ISA device that fails to probe is a PnP device,
instead, use the bus_print_child_* functions to display the error message.
Also, since this is more of a warning than an error, hide it behind
bootverbose.

Similarly, if isa_assign_resources() fails to allocate resources to a
device, use bus_print_child_header() instead of device_printf(), and
display the resources that could not be allocated if bootverbose is true.

Approved by:	msmith
Help from:	mdodd
2000-07-12 00:42:08 +00:00
Seigo Tanimura
fb0ef52838 Finally merge newmidi.
(I had been busy for my own research activity until the last weekend)

Supported devices:

SB Midi Port			(sbc + midi)
SB OPL3				(sbc + midi)
16550 UART			(midi, needs a trick in your hint)
CS461x Midi Port		(csa + midi)

OSS-compatible sequencer	(seq)

Supported playing software:

playmidi			(We definitely need more)

Notes:

/dev/midistat now reports installed midi drivers. /dev/sndstat reports
only pcm drivers. We need the new name(pcmstat?).

EMU8000(SB AWE) does not sound yet but does get probed so that the OPL3
synth on an AWE card works.

TODO:

MSS/PCI bridge drivers
Midi-tty interface to support general serial devices
Modules
2000-07-11 11:49:33 +00:00
Poul-Henning Kamp
77978ab8bc Previous commit changing SYSCTL_HANDLER_ARGS violated KNF.
Pointed out by:	bde
2000-07-04 11:25:35 +00:00
Poul-Henning Kamp
82d9ae4e32 Style police catches up with rev 1.26 of src/sys/sys/sysctl.h:
Sanitize SYSCTL_HANDLER_ARGS so that simplistic tools can grog our
sources:

        -sysctl_vm_zone SYSCTL_HANDLER_ARGS
        +sysctl_vm_zone (SYSCTL_HANDLER_ARGS)
2000-07-03 09:35:31 +00:00
Peter Wemm
c20ac811f3 Add device_identify methods so that we do not need the
hint.sc.0.at=isa and hint.vga.0.at=isa  hints in order for these to
probe/attach.
2000-06-28 22:53:35 +00:00
Doug Rabson
76ea0c0c8f Only print the diagnostic about extended I/O ports if bootverbose is true. 2000-06-25 09:20:56 +00:00
Doug Rabson
7cb314ad2a Don't record an irq mask if its empty - it confuses the resource allocator. 2000-06-25 09:19:59 +00:00
Doug Rabson
328d36e934 Replace the unknown driver with a nomatch method in the isa driver.
This allows ISA PnP drivers to be dynamically loaded after the kernel
has booted.
2000-06-25 09:19:02 +00:00
Mike Smith
2a50a6d730 Add PnP probe methods to some common AT hardware drivers. In each case,
the PnP probe is merely a stub as we make assumptions about some of this
hardware before we have probed it.

Since these devices (with the exception of the speaker) are 'standard',
suppress output in the !bootverbose case to clean up the probe messages
somewhat.
2000-06-23 07:44:33 +00:00
Peter Wemm
81e3fd99fc This is a temporary bandaid to get vidconsole working again without
options USERCONFIG being present.  Due to the lack of early boot hints
neither sio or sc would succeed the console probe.  If USERCONFIG was
active, there was a second cninit() after userconfig had run and that
happened to make the console selection work.  If you left out USERCONFIG,
you would end up with no console at all. :-(

This needs a proper fix, especially when sc looses the "at isa" hint.
But for now, this works.
2000-06-15 10:01:12 +00:00
Paul Saab
26b6ea69c3 Add option ALT_BREAK_TO_DEBUGGER.
Implement the Solaris way to break into DDB over a serial console
instead of sending a break.  Sending the character sequence
CR ~ ^b will break the kernel into DDB (if DDB is enabled).

Reviewed by:	peter
2000-06-14 06:41:33 +00:00
Bruce Evans
5f582114dd Add SWI_TQ_MASK to all interrupt masks except SWI_CLOCK_MASK. Use a
new macro SWI_LOW_MASK to give the mask for low priority SWIs instead
of hard-coding this mask as SWI_CLOCK_MASK.

Reviewed by:	dfr
2000-05-31 13:32:28 +00:00
Seigo Tanimura
26605df75f Add SUP1670 - Supra 336i V+ Intl. Since we update the PnP IDs
more frequently than the core part of the sio driver, it might
be good to move the PnP IDs to sio_isapnp.h or something like
that.

PR:		i386/18828
Submitted by:	J.P. King <jpk28@cam.ac.uk>
2000-05-26 11:41:08 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Seigo Tanimura
07a1e11832 Add RSS0262 - 5614Jx3[G] V90+K56Flex Modem.
PR:		kern/18168
Submitted by:	Tony Voet <voet@engineer.com>
2000-05-19 10:02:15 +00:00
Seigo Tanimura
026957712e Add ACH2012 - 5634BTS 56K Video Ready Modem.
PR:		kern/17351
Submitted by:	Eric D. Futch <efutch@nyct.net>
2000-05-19 03:41:22 +00:00
Seigo Tanimura
ca39cee745 Add a couple of new PnP IDs.
o OZO800f - Zoom 2812 (56k Modem)
PR:		kern/18603
Submitted by:	Matt Loschert <loschert@servint.com>

o DAV0336 - DAVICOM 336PNP MODEM
PR:		kern/18608
Submitted by:	Martijn Plak <martijn@be3.com>
2000-05-18 02:06:24 +00:00
Doug Rabson
5c885c3f83 Port ppc driver to alpha.
Submitted by: Andrew M. Miklic <miklic@ibm.net>
2000-05-14 13:47:57 +00:00
Yoshihiro Takahashi
bb7d754339 Use bus_space stuff except where it needs high performance.
Reviewed by:	bde
2000-05-12 12:37:28 +00:00
Yoshihiro Takahashi
d1c418891e Supported PC-98. 2000-05-11 11:09:50 +00:00
Poul-Henning Kamp
1fdb6e6c69 Step down a level and issue format requests with a struct bio instead
of a struct buf.
2000-05-06 07:01:47 +00:00
Poul-Henning Kamp
9626b608de Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
Seigo Tanimura
af2dfb5b69 Add the logical ID of FUJITSU Modem 33600 PNP/I2.
PR:		kern/18257
Submitted by:	Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
2000-05-02 05:54:11 +00:00
Bruce Evans
3aae7b16d2 Fixed the type of some ivar access functions. Ivars have type uintptr_t,
not u_long.  On i386's with 64-bit longs, returning u_longs indirectly
in (more than) the space reserved for uintptr_t's tended to corrupt the
previous frame pointer in the stack frame, so it was not easy to debug.
The type mismatches are hidden by the bogus cast in DEVMETHOD().
2000-04-30 10:01:56 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Garrett Wollman
7a15d61951 Enable PnP attachment for parallel port controllers.
PR:		17495
2000-04-22 15:08:50 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00