to run Solaris executables (or executables from any other ELF system)
directly off the CD-ROM without having to waste megabytes of disk
by copying them to another filesystem just to brand them.
give the same behaviour produced before today. If sysadmin sets it
to a valid ELF brand, ELF image activator will attempt to run unbranded
ELF exectutables as if they were branded with that value.
Suggested by: Dima Ruban <dima@best.net>
process to sneak in and write to or close the pipe. The read code
enters a 'piperd' state after doing the lock operation without
checking to see if the state changed, which can cause the process
to wait forever.
The code has also been documented more.
completes, change if() to KASSERT(). This is not a bug, we are
simplify clarifying and optimizing the code.
In if/else in vfs_object_create(), the failure of both conditionals
will lead to a NULL object. Exit gracefully if this case occurs.
( this case does not normally occur, but needed to be handled ).
Obtained from: Eivind Eklund <eivind@FreeBSD.org>
Since paging is in progress, page scan in vm_page_qcollapse() must be
protected at atleast splbio() to prevent pages from being ripped out from
under the scan.
Add freebsd.fr, for FreeBSD specific forth source. Add $ and %, to
replace the lost @ and - functionality of include. $ has the opposite
behavior of @ though, since the default behavior was inverted.
Change include() so it will be able to load files with forth code,
instead of just builtins. Remove #@- from the include section of the
help file, since they don't work in the new version of include, unless
BOOT_FORTH is not defined.
Change bf_run() so it will return the result returned by ficlExec(). Also,
make bf_run() push "interpret" to be executed by ficlExec(), since ficlExec()
doesn't do it by itself. (Things worked previously because nothing
recursed through ficlExec() by the way of bf_run()).
Change/extend comments on builtin behavior.
Search for "interpret" at the end of bf_init(), so /boot/boot.4th can
provide it's own version.
Remove dead code.
error cases, but the replacement should be doing everything they
did, except what did shouldn't be doing, and might do a little more
they ought to be doing.
structures" but since tty structs aren't malloced it is actually
mainly for tty-level (clist) buffers. It was slightly misused
here for com structs, and the previous commit completely misused
it for device buffers.
Fixed some bugs in nearby pccard code:
- memory leak when pccards go away (broken in previous commit).
- bogus bzeroing of the com struct before freeing it.
- style bugs.
the input speed, so that it can work at speeds larger than 115200
bps without being flow controlled. The buffer is twice as large
as before at 115200 bps and half as large as before at low speeds
Use a single interrupt-level buffer instead of ping-pong buffers
because the simplifications provided by ping-pong buffers became
complications.
This change is over-engineered. Statically configured buffering
was simpler and faster, and increasing the buffer size to support
1.5Mbps would cost about 1 US cent's worth of RAM per port, but I
was interested in the buffer switching mechanism.
not to vmThrow errors. This is not what the comments say it does, and
it doesn't work when there is no ficlExec environment (like it's only
use in sys/boot/common/interp_forth.c).
PR: bin/9772
allocated was not big enough, but it ended up to being used where it
was supposed to be used. The person who did that ought to be shot, but
since I'm a good person, I'll forgive myself...
PR: bin/9743
panic during boot on machines with >=2GB of RAM. Also changed some
incorrect printf conversion specifiers from %d to %u (signed to unsigned).
This fixes bugs when printing the amount of memory on machines with >=2GB
of RAM.
The vm_map_insert()/vm_object_coalesce() optimization has been extended
to include OBJT_SWAP objects as well as OBJT_DEFAULT objects. This is
possible because it costs nothing to extend an OBJT_SWAP object with
the new swapper. We can't do this with the old swapper. The old swapper
used a linear array that would have had to have been reallocated, costing
time as well as a potential low-memory deadlock.
/dev/urandom takes about 38 seconds on a P5/133. It is useful
to be able to kill such reads almost immediately. Processes
doing such reads are now scheduled so their denial of service
is no worse than that of processes looping in user mode.
code when examining their fix, which caused my code (in rev 1.52) to:
- panic("soaccept: !NOFDREF")
- fatal trap 12, with tracebacks going thru soclose and soaccept
Drivers should be updated if they get flagged by this message.
(The reason this is important is because we do not have a way
to catch this mistake for interfaces added after ifinit() runs.)
in vm_map_simplify_entry. Basically, once you've verified that
the objects in the adjacent vm_map_entry's are the same, either
NULL or the same vm_object, there's no point in checking that the
objects have the same behavior.
Obtained from: Alan Cox <alc@cs.rice.edu>
Increase the overall length of the delay by 10.
Without this a 3C509 card on my MediaGX crash box can't be reliably
read. With this it is solid.
I've left a delay multiplier in instead of just changing the base
delay because I'm surprised I had to increase it so much and expect
there may be another problem.
Checked by: "Richard Seaman, Jr." <dick@tar.com>
Fix the following problem:
As the code stands now, growing any stack, and not just the process's
main stack, modifies vm->vm_ssize. This is inconsistent with the code
earlier in the same procedure.
can be hung.
Add a tunable delay at the beginning of the SHUTDOWN_FINAL at_shutdown
queue, allowing time to settle before we launch into the list of things
that are expected to turn the system off.
Fix a bug in at_shutdown_pri() where the second insertion always put
the item in second position in the queue.
Reviewed by: "D. Rock" <rock@cs.uni-sb.de>
Change microseq offsets. Previously, offsets of the program counter where
added to the index of the current microinstruction. Make them rely on the
index of the next executed microinstruction.
Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
Using suser() means that the p_acflag will (can) be set, to show that
a process used super-powers during execution. It also makes it easier
to restrict roots we don't trust later on.
Reviewed by: bde
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).
Roll internal release tags.
cycle to get rid of the old 1.31 firmware. *@!$&^@&$!&^&^!!!!!
But anyway comment it out and use new SBus 7.55 firmware. We get fast posting
with this as well as 32 luns and target mode support.
(not that this is used yet in FreeBSD, but it's ready for FreeBSD-sparc
whenever it happens....)
to break existing software) acting as a pointer to emulator-specific
state data that some emulators may (or may not) need to maintain about
a socket.
Used by the svr4 module as a place for maintaining STREAMS emulation state.
Discussed with: Mike Smith, Garrett Wollman back in Sept 98
v_caddr_t with extreme prejudice. Here the bogons were originally
the same as for c_caddr_t (half-baked K&R support), but rev.1.95
changed one wrong cast and one harmless cast to 2 wrong casts,
and rev.1.96 only fixed the originally wrong cast.
is not implied by -Wall as claimed by gcc.1. Adding it causes a
measly 7193 new warnings for LINT, mostly for "unused parameter" and
"comparison between signed and unsigned".
terminating c_caddr_t with extreme prejudice. Here we depended
on the "opaque" type c_caddr_t being precisely `const char *'
to do unportable pointer arithmetic.
c_caddr_t with extreme prejudice. Here the original casts to
caddr_t were to support K&R compilers (or missing prototypes),
but the relevant source files require an ANSI compiler.
problem and solution is outlined in the comments, but basically
we needed a way to allow the SYSINIT mechanism to handle const void *
arguments and function pointers as well as non-const arguments and
function pointers while still maintaining the compiler's ability to
issue warnings if you try to use a bad combination.
c_caddr_t with extreme prejudice. Here the point of the original
cast to caddr_t was to break the warning about the const mismatch
between write(2)'s `const void *buf' and `struct uio's `char
*iov_base' (previous bitrot gave a gratuitous dependency on caddr_t
being char *). Compiling with -Wcast-qual made the cast a full
no-op.
This change has no effect on the warning for discarding `const'
on assignment to iov_base. The warning should not be fixed by
splitting `struct iovec' into a non-const version for read()
and a const version for write(), since correct const poisoning
would affect all pointers to i/o addresses. Const'ness should
probably be forgotten by not declaring it in syscalls.master.
c_caddr_t with extreme prejudice. Here we want to convert from
`const char *' to `const char *'. Casting through c_caddr_t is
not the way to do this. The original cast to caddr_t was apparently
to break warnings about const mismatches in other versions of BSD
(in 4.4BSDLite2, the conversion is from `const char *path' to
plain caddr_t).
Add C_DECLARE_MODULE - same as DECLARE_MODULE but uses C_SYSINIT
instead of SYSINIT.
The C_ items are going to be used for items passing const data to
sysinit.
the interrupt which will be given to the PCIC. If the value supplied is
illegal or not available, interrupts will be turned off and polled mode
used instead.
apparently in accordance with style(9).
Complained-about-by: bde
vinumopen: Change check for root user to a call to suser(9)
vinumclose: Remove check for root user.
Nitpicked-by: phk
Auto Detection Mode. This leaves MSP3400C owners still unsupported.
Thanks to Gerd Knorr <kraxel@cs.tu-berlin.de> for providing some early
assistance and sample code in the linux bttv driver.
Nicolas Souchu <nsouch@freebsd.org> ported the msp_read/write/reset
functions to smbus/iicbus.
METEOR_INPUT_DEV2 now selects a composite camera on the SVIDEO port.
For true SVIDEO, use METEOR_INPUT_DEV_SVIDEO.
If you get a monochrome image from the SVIDEO port, you have
seleted the wrong input type.
Tested by: Johan Larsson<gozer@ludd.luth.se>
version and a const void * version. Currently the const void * version
simply calls the void * version ( i.e. no 'fix' is in place ).
A solution needs to be found for the C_SYSINIT ( etc...) family of
macros that allows const void * without generating a warning, but
does not allow non-const void *.
Sun implemented iBCS2 compatibility on Solaris >= 2.6: The emulator
runs in user-mode, patching the LDT so that client programs making
syscalls through the old iBCS2 call gate get handled by the emulator
process. Unemulated syscalls therefore need their own call-gate that
bypasses the emulator. Sun chose LDT entry 4 to implement this, which
is what we've been using as LUDATA_SEL, so we need to change LUDATA_SEL
if we want to run Solaris executables.
Discussed with: Mike Smith
keyboard.
- Translate some keycode for the 84 keyboard so that the 84 keyboard
and the 101 keyboard become more compatible in terms of keycodes.
- Updated the built-in keymaps so that it is in line with the recent
changes in share/syscons/keymaps.
- Added some comment on the Pause/Break key on the 101 keyboard.
vinum_scandisk: check not only drive error, but also drive state,
before accessing the drive.
drivecmp: Remove warning messages by Backing out overly constant
declarations in revision 1.9.
