To support INTRNG with ACPI we need to set a non-zero cross reference value
for the interrupt controller. The GICv3 driver already had this value set,
however it was missed in the GICv2 driver. Fix this by setting xref to the
correct value.
Approved by: re (gjb)
This patch adds the very initial support for HTM that might come at FreeBSD
version 12.1. This basic support defines a new kABI, so, we do not need to change
it later during 12.1 time frame, when the full implementation will come.
Reviewed by: jhibbits
Approved by: re(marius), jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D16889
Testing m->queue != PQ_NONE is not sufficient; see the commit log
message for r338276. As of r332974 vm_page_dequeue() handles
already-dequeued pages, so just replace vm_page_remque() calls with
vm_page_dequeue() calls.
Reviewed by: kib
Tested by: pho
Approved by: re (marius)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17025
adding the missing include files and changing a the type of cpuid which
would otherwise cause a false comparison with NETISR_CPUID_NONE.
Reviewed by: rrs
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16891
Otherwise the "depends_on provider" guard in sctp.d does not work as
intended.
Reported by: mjg
Reviewed by: tuexen
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17057
Somehow this was working even after PTI in, at least on amd64, and got
broken by something only very recently.
Reviewed by: araujo
Approved by: re (gjb)
The receive side scaling stride parameter is a value which define the interval
between active receive side queues. The traffic for the inactive queues is
redirected to the nearest active queue by use of modulus. The default value
of this parameter is one, which means all receive side queues are used.
The point of this feature is to redirect more traffic to fewer receive side
queues in order to take more advantage of sorted large receive offload,
sorted LRO. The sorted LRO works better when more packets are accumulated
per service interval.
MFC after: 3 days
Approved by: re (marius)
Sponsored by: Mellanox Technologies
In r337943 ifnet's if_pcp was set to the PCP value in use
instead of IFNET_PCP_NONE.
Current ibcore code assumes that if_pcp is IFNET_PCP_NONE with
VLAN interfaces so it can identify prio-tagged traffic.
Fix that by explicitly verifying that that the if_type is IFT_ETHER
and not IFT_L2VLAN.
MFC after: 3 days
Approved by: re (Marius), hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
Inspecting the PRM no more than 0x3F data segments, DS, of size 16 bytes is
allowed.
Worst case scenario summary of DS usage:
Header is fixed: 2 DS
Maximum inlining: 98 => (98 - 2) / 16 = 6 DS
Remainder: 0x3F - 2 - 6 = 55 DS (mbuf frags)
Previously a value of 56 DS was used and this would work in the
normal case because not all inline data area was used up.
MFC after: 3 days
Approved by: re (marius)
Sponsored by: Mellanox Technologies
Also remove some related and unused subroutines. They have long been
replaced by variants that handle multiple coalesced events with a single
call.
No functional change intended.
Reviewed by: cem, kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17029
MIPS64 does not store the 'r_info' field of a relocation table entry as
a 64-bit value consisting of a 32-bit symbol index in the high 32 bits
and a 32-bit type in the low 32 bits as on other architectures. Instead,
the 64-bit 'r_info' field is really a 32-bit symbol index followed by four
individual byte type fields. For big-endian MIPS64, treating this as a
64-bit integer happens to be compatible with the layout expected by other
architectures (symbol index in upper 32-bits of resulting "native" 64-bit
integer). However, for little-endian MIPS64 the parsed 64-bit integer
contains the symbol index in the low 32 bits and the 4 individual byte
type fields in the upper 32-bits (but as if the upper 32-bits were
byte-swapped).
To cope, add two helper routines in gelf_getrel.c to translate between the
correct native 'r_info' value and the value obtained after the normal
byte-swap translation. Use these routines in gelf_getrel(), gelf_getrela(),
gelf_update_rel(), and gelf_update_rela(). This fixes 'readelf -r' on
little-endian MIPS64 objects which was previously decoding incorrect
relocations as well as 'objcopy: invalid symbox index' warnings from
objcopy when extracting debug symbols from kernel modules.
Even with this fixed, objcopy was still crashing when trying to extract
debug symbols from little-endian MIPS64 modules. The workaround in
gelf_*rel*() depends on the current ELF object having a valid ELF header
so that the 'e_machine' field can be compared against EM_MIPS. objcopy
was parsing the relocation entries to possibly rewrite the 'r_info' fields
in the update_relocs() function before writing the initial ELF header to
the destination object file. Move the initial write of the ELF header
earlier before copy_contents() so that update_relocs() uses the correct
symbol index values.
Note that this change should really go upstream. The binutils readelf
source has a similar hack for MIPS64EL though I implemented this version
from scratch using the MIPS64 ABI PDF as a reference.
Discussed with: jkoshy
Reviewed by: emaste, imp
Approved by: re (gjb, kib)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15734
We will have last_block < blocks if the block count is divisible
by BLIST_BMAP_RADIX, but a terminator node is still needed if the
tree isn't balanced. In this case we were overruning the blist
array by 16 bytes during initialization.
While here, add a check for the invalid blocks == 0 case.
PR: 231116
Reviewed by: alc, kib (previous version), Doug Moore <dougm@rice.edu>
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17020
No functional change intended.
Reviewed by: bz, Johannes Lundberg <johalun0@gmail.com>
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17030
fast forwarding path, as it already works for IPv6 and for both of them
on old slow path.
PR: 231143
Reviewed by: ae
Approved by: re (gjb)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17039
This is done by setting SUM (permit Supervisor User Memory access)
bit in sstatus register.
The functions we allow access for are routines in assembly that
explicitly handle crossing the user kernel boundary.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
Also this fixes the eflags.ac leak from copyin_smap() when the copied
data length is multiple of eight bytes.
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Non-PTI mode does not switch kcr3, which means that kcr3 is almost
always stale. This is important for the NMI handler, which reloads
%cr3 with PCPU(kcr3) if the value is different from PMAP_NO_CR3.
The end result is that curpmap in NMI handler does not match the page
table loaded into hardware. The manifestation was copyin(9) looping
forever when a usermode access page fault cannot be resolved by
vm_fault() updating a different page table.
Reported by: mmacy
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Approved by: re (gjb)
r337289 has a side effect of reducing usb frame 0 buffer size down to
touch report size. That broke some devices e.g. "Raydium Touch System"
which are capable of generating non-touch frames of bigger length.
Fix it with enlarging frame 0 buffer up to internal wmt(4) buffer size.
Reported by: Roberto Fernandez Cueto <roberfern@gmail.com>
Tested by: Roberto Fernandez Cueto <roberfern@gmail.com>
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16772
to clear L2 and L3 route caches.
Also mark one function argument as __unused.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17007
macro rather than hand crafted code.
No functional changes.
Reviewed by: karels
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17006
inp_route6 for IPv6 code after r301217.
This was most likely a c&p error from the legacy IP code, which
did not matter as it is a union and both structures have the same
layout at the beginning.
No functional changes.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17005
use the already existing one. No functional changes.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17004
This was disabled recently due to lack of support in KDB disassembler
and DTrace FBT provider. Support for 'C'-extension to both of these was
added, so we can now enable 'C'-extension.
This reduces size of the kernel important for low-end embedded devices,
and saves cache footprint for high perfomance machines.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
/etc/security/audit_event to provide a list of audit event-number <->
name mappings. However, this occurs too late for anonymous tracing.
With this change, adding 'audit_event_load="YES"' to /boot/loader.conf
will cause the boot loader to preload the file, and then the kernel
audit code will parse it to register an initial set of audit event-number
<-> name mappings. Those mappings can later be updated by auditd(8) if
the configuration file changes.
Reviewed by: gnn, asomers, markj, allanjude
Discussed with: jhb
Approved by: re (kib)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16589
This appeared to be required to have EFI RT support and EFI RTC
enabled by default, because there are too many reports of faulting
calls on many different machines. The knob is added to leave the
exceptions unhandled to allow to debug the actual bugs.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
handling.
This is split into a separate commit from the main change to make it
easier to handle possible revert after upcoming KBI freeze.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
Print error message in verbose mode when CLOCK_SETTIME() clock_if.m
method failed. For EFIRT RTC clock, add error code for the failure of
CLOCK_GETTIME() report.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
trap_pfault() KPTI violation check.
EFI RT may set curpmap to NULL for the duration of the call for some
machines (PCID but no INVPCID). Since apparently EFI RT code must be
ready for exceptions from the calls, avoid dereferencing curpmap until
we know that this call does not come from usermode.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
that can be coalesced. To be clear, fragmentation of phys_avail[] is not
the cause. This fragmentation of vm_phys_segs[] arises from the "special"
calls to vm_phys_add_seg(), in other words, not those that derive directly
from phys_avail[], but those that we create for the initial kernel page
table pages and now for the kernel and modules loaded at boot time. Since
we sometimes iterate over the physical memory segments, coalescing these
segments at initialization time is a worthwhile change.
Reviewed by: kib, markj
Approved by: re (rgrimes)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16976
for the "ctld hanging on reload" problem observed in same cases under
high load. I'm not 100% sure it's _the_ fix, as the issue is rather hard
to reproduce, but it was tested as part of a larger path and the problem
disappeared. It certainly shouldn't break anything.
Now, technically, it shouldn't be needed. Quoting mav@, "After
ct->ct_online == 0 there should be no new sessions attached to the target.
And if you see some problems abbout it, it may either mean that there are
some races where single cfiscsi_session_terminate(cs) call may be lost,
or as a guess while this thread was sleeping target was reenabbled and
redisabled again". Should such race be discovered and properly fixed
in the future, than this and the followup two commits can be backed out.
PR: 220175
Reported by: Eugene M. Zheganin <emz at norma.perm.ru>
Tested by: Eugene M. Zheganin <emz at norma.perm.ru>
Discussed with: mav
Approved by: re (gjb)
MFC after: 2 weeks
Sponsored by: playkey.net
play the MIDI files through /dev/sequencer device with tools like
playmidi. The audio output will go through the external MIDI device
such like wavetable synthesis card.
Reviewed by: matk (a long time ago), kib
Approved by: re (kib)
Tested with: Terratec SiXPack 5.1+ + Yamaha DB50XG
MFC after: 4 weeks
This fixes an upstream regression introduced in r331404, causing overly
aggressive reclamation of the ARC when under pressure.
Diagnosed by: Paul <devgs@ukr.net>
Approved by: re (gjb)
MFC after: 3 days
cycle. The i386 build failure appears to be transient, and
now becoming more difficult to reliably reproduce to identify
the cause. I will continue to investigate this, however.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
The PCIOCLISTVPD ioctl on /dev/pci is used to fetch a list of VPD
key-value pairs for a specific PCI function. It is used by
'pciconf -l -V'. The list is stored in a userland-supplied buffer as
an array of variable-length structures where the key and data length
are stored in a fixed-size header followed by the variable-length
value as a byte array. To facilitate walking this array in userland,
<sys/pciio.h> provides a PVE_NEXT() helper macro to return a pointer
to the next array element by reading the the length out of the current
header and using it to compute the address of the next header.
To simplify the implementation, the ioctl handler was also using
PVE_NEXT() when on the user address of the user buffer to compute the
user address of the next array element. However, the PVE_NEXT() macro
when used with a user address was reading the value's length by
indirecting the user pointer. The value was ready after the current
record had been copied out to the user buffer, so it appeared to work
on architectures where user addresses are directly dereferencable from
the kernel (all but powerpc and i386 after the 4:4 split). The recent
enablement of SMAP on amd64 caught this violation however. To fix,
add a variant of PVE_NEXT() for use in the ioctl handler that takes an
explicit value length.
Reported by: Jeffrey Pieper @ Intel
Reviewed by: kib
Approved by: re (gjb)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16800
r337776 started hashing the fragments into buckets for faster lookup.
The hashkey is larger than intended. This results in random stack data being
included in the hashed data, which in turn means that fragments of the same
packet might end up in different buckets, causing the reassembly to fail.
Set the correct size for hashkey.
PR: 231045
Approved by: re (kib)
MFC after: 3 days
