101 Commits

Author SHA1 Message Date
Mateusz Guzik
586ee69f09 fs: clean up empty lines in .c and .h files 2020-09-01 21:18:40 +00:00
Rick Macklem
808306dd0f Delete the unused "use_ext" argument to nfscl_reqstart().
This is a partial revert of r363210, since the "use_ext" argument added
by that commit is not actually useful.

This patch should not result in any semantics change.
2020-08-18 01:41:12 +00:00
Rick Macklem
02511d2112 Add an argument to newnfs_connect() that indicates use TLS for the connection.
For NFSv4.0, the server creates a server->client TCP connection for callbacks.
If the client mount on the server is using TLS, enable TLS for this callback
TCP connection.
TLS connections from clients will not be supported until the kernel RPC
changes are committed.

Since this changes the internal ABI between the NFS kernel modules that
will require a version bump, delete newnfs_trimtrailing(), which is no
longer used.

Since LCL_TLSCB is not yet set, these changes should not have any semantic
affect at this time.
2020-08-11 00:26:45 +00:00
Rick Macklem
cb889ce631 Add optional support for ext_pgs mbufs to the NFS server's read, readlink
and getxattr operations.

This patch optionally enables generation of read, readlink and getxattr replies
in ext_pgs mbufs.  Since neither of ND_EXTPG or ND_TLS are currently ever set,
there is no change in semantics at this time.
It also corrects the message in a couple of panic()s that should never occur.

This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.

Use of ext_pgs mbufs will not be enabled until the kernel RPC is updated
to handle TLS.
2020-07-31 23:35:49 +00:00
Rick Macklem
18a48314ba Add support for ext_pgs mbufs to nfsrv_adj().
This patch uses a slightly different algorithm for nfsrv_adj()
since ext_pgs mbuf lists are not permitted to have m_len == 0 mbufs.
As such, the code now frees mbufs after the adjustment in the list instead
of setting their m_len field to 0.
Since mbuf(s) may be trimmed off the tail of the list, the function now
returns a pointer to the last mbuf in the list.  This saves the caller
from needing to use m_last() to find the last mbuf.
It also implies that it might return a nul list, which required a check for
that in nfsrvd_readlink().

This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.

Use of ext_pgs mbufs will not be enabled until the kernel RPC is updated
to handle TLS.
2020-07-26 02:42:09 +00:00
Rick Macklem
cfaafa7908 Add support for ext_pgs mbufs to nfsm_uiombuflist() and nfsm_split().
This patch uses a slightly different algorithm for nfsm_uiombuflist() for
the non-ext_pgs case, where a variable called "mcp" is maintained, pointing to
the current location that mbuf data can be filled into. This avoids use of
mtod(mp, char *) + mp->m_len to calculate the location, since this does
not work for ext_pgs mbufs and I think it makes the algorithm more readable.
This change should not result in semantic changes for the non-ext_pgs case.
The patch also deletes come unneeded code.

It also adds support for anonymous page ext_pgs mbufs to nfsm_split().

This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
At this time for this case, use of ext_pgs mbufs cannot be enabled, since
ktls_encrypt() replaces the unencrypted data with encrypted data in place.

Until such time as this can be enabled, there should be no semantic change.
Also, note that this code is only used by the NFS client for a mirrored pNFS
server.
2020-07-24 23:17:09 +00:00
Rick Macklem
34fc29e0c9 Add support for ext_pgs mbufs to nfsm_strtom().
Also, add a new function nfsm_add_ext_pgs() which will either add a page
or add a new ext_pgs mbuf with a page to the mbuf list. Used by nfsm_strtom().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.

Since ND_EXTPG is never set yet, there is no semantic change at this time.
2020-07-05 21:55:16 +00:00
Rick Macklem
4476c1def0 Add a boolean argument to nfscl_reqstart() to indicate that ext_pgs mbufs
should be used.

For KERN_TLS (and possibly some other future network interface) the mbuf
list passed into sosend() must be ext_pgs mbufs. The krpc could simply
copy all the mbuf data into ext_pgs mbufs before calling sosend(), but
that would be inefficient for large RPC messages.
This patch adds an argument to nfscl_reqstart() to indicate that it should
fill the RPC message into ext_pgs mbufs.
It also adds fields to "struct nfsrv_descript" needed for building NFS RPC
messages in ext_pgs mbufs, along with new flags for this.

Since the argument is always "false", this commit should not result in any
semantic change. However, this commit prepares the code
for future commits that will add support for building of NFS RPC messages
in ext_pgs mbufs.
2020-06-26 03:11:54 +00:00
Rick Macklem
3d7650f04c Add a function nfsm_set() to initialize "struct nfsrv_descript" for building
mbuf lists.

This function is currently trivial, but will that will change when
support for building NFS messages in ext_pgs mbufs is added.
Adding support for ext_pgs mbufs is needed for KERN_TLS, which will
be used to implement nfs-over-tls.
2020-05-18 00:07:45 +00:00
Rick Macklem
04d6c514b0 Delete unused function newnfs_trimleading.
The NFS function called newnfs_trimleading() has not been used by the
code in long time. To give you a clue, it still had a K&R style function
declaration.
Delete it, since it is just cruft, as a part of the NFS mbuf handling
cleanup in preparation for adding ext_pgs mbuf support.
The ext_pgs mbuf support for the build/send side is needed by
nfs-over-tls.
2020-05-06 00:44:03 +00:00
Rick Macklem
3973ef1dfc Revert r360514, to avoid unnecessary churn of the sources.
r360514 prepared the NFS code for changes to handle ext_pgs mbufs on
the receive side. However, at this time, KERN_TLS does not pass
ext_pgs mbufs up through soreceive(). As such, as this time, only
the send/build side of the NFS mbuf code needs to handle ext_pgs mbufs.
Revert r360514 since the rather extensive changes required for receive
side ext_pgs mbufs are not yet needed.
This avoids unnecessary churn of the sources.
2020-05-05 00:58:03 +00:00
Rick Macklem
0c9cd5cacd Factor some code out of nfsm_dissct() into separate functions.
Factoring some of the code in nfsm_dissct() out into separate functions
allows these functions to be used elsewhere in the NFS mbuf handling code.
Other uses of these functions will be done in future commits.
It also makes it easier to add support for ext_pgs mbufs, which is needed
for nfs-over-tls under development in base/projects/nfs-over-tls.

Although the algorithm in nfsm_dissct() is somewhat re-written by this
patch, the semantics of nfsm_dissct() should not have changed.
2020-05-01 00:36:14 +00:00
Rick Macklem
897d7d45ba Make the NFSv4.n client's recovery from NFSERR_BADSESSION RFC5661 conformant.
RFC5661 specifies that a client's recovery upon receipt of NFSERR_BADSESSION
should first consist of a CreateSession operation using the extant ClientID.
If that fails, then a full recovery beginning with the ExchangeID operation
is to be done.
Without this patch, the FreeBSD client did not attempt the CreateSession
operation with the extant ClientID and went directly to a full recovery
beginning with ExchangeID. I have had this patch several years, but since
no extant NFSv4.n server required the CreateSession with extant ClientID,
I have never committed it.
I an committing it now, since I suspect some future NFSv4.n server will
require this and it should not negatively impact recovery for extant NFSv4.n
servers, since they should all return NFSERR_STATECLIENTID for this first
CreateSession.

The patched client has been tested for recovery against both the FreeBSD
and Linux NFSv4.n servers and no problems have been observed.

MFC after:	1 month
2020-04-22 21:00:14 +00:00
Rick Macklem
ae070589d3 Replace all instances of the typedef mbuf_t with "struct mbuf *".
The typedef mbuf_t was used for the Mac OS/X port of the code long ago.
Since this port is no longer used and the use of mbuf_t obscures what
the code does (and is not consistent with style(9)), it is no longer needed.
This patch replaces all instances of mbuf_t with "struct mbuf *", so that
it is no longer used.

This patch should not result in any semantic change.
2020-04-17 21:17:51 +00:00
Rick Macklem
76fd19b0a2 Fix noisy NFSv4 server printf.
Peter reported that his dmesg was getting cluttered with
nfsrv_cache_session: no session
messages when he rebooted his NFS server and they did not seem useful.
He was correct, in that these messages are "normal" and expected when
NFSv4.1 or NFSv4.2 are mounted and the server is rebooted.
This patch silences the printf() during the grace period after a reboot.
It also adds the client IP address to the printf(), so that the message
is more useful if/when it occurs. If this happens outside of the
server's grace period, it does indicate something is not working correctly.
Instead of adding yet another nd_XXX argument, the arguments for
nfsrv_cache_session() were simplified to take a "struct nfsrv_descript *".

Reported by:	pen@lysator.liu.se
MFC after:	2 weeks
2020-04-06 23:21:39 +00:00
Rick Macklem
c057a37818 Add support for NFSv4.2 to the NFS client and server.
This patch adds support for NFSv4.2 (RFC-7862) and Extended Attributes
(RFC-8276) to the NFS client and server.
NFSv4.2 is comprised of several optional features that can be supported
in addition to NFSv4.1. This patch adds the following optional features:
   - posix_fadvise(POSIX_FADV_WILLNEED/POSIX_FADV_DONTNEED)
   - posix_fallocate()
   - intra server file range copying via the copy_file_range(2) syscall
     --> Avoiding data tranfer over the wire to/from the NFS client.
   - lseek(SEEK_DATA/SEEK_HOLE)
   - Extended attribute syscalls for "user" namespace attributes as defined
     by RFC-8276.

Although this patch is fairly large, it should not affect support for
the other versions of NFS. However it does add two new sysctls that allow
a sysadmin to limit which minor versions of NFSv4 a server supports, allowing
a sysadmin to disable NFSv4.2.

Unfortunately, when the NFS stats structure was last revised, it was assumed
that there would be no additional operations added beyond what was
specified in RFC-7862. However RFC-8276 did add additional operations,
forcing the NFS stats structure to revised again. It now has extra unused
entries in all arrays, so that future extensions to NFSv4.2 can be
accomodated without revising this structure again.

A future commit will update nfsstat(1) to report counts for the new NFSv4.2
specific operations/procedures.

This patch affects the internal interface between the nfscommon, nfscl and
nfsd modules and, as such, they all must be upgraded simultaneously.
I will do a version bump (although arguably not needed), due to this.

This code has survived a "make universe" but has not been built with a
recent GCC. If you encounter build problems, please email me.

Relnotes:	yes
2019-12-12 23:22:55 +00:00
Rick Macklem
2e67077700 Delete the unused "nd" argument for nfsrv_checkdsattr().
The "nd" argument for nfsrv_checkdsattr() is no longer used by the function.
This patch deletes it. This allows subsequent patches to delete the "nd"
argument from nfsrv_proxyds(), since it's only use of "nd" was to pass it
to nfsrv_checkdsattr(). The same will then be true for nfsvno_getattr(),
which passes "nd" to nfsrv_proxyds().
Getting rid of the "nd" argument from nfsvno_getattr() avoids confusion
over why it might need "nd".

This patch is trivial and does not have any semantic effect.
Found by inspection while working on the NFSv4.2 server.
2019-09-04 22:37:28 +00:00
Rick Macklem
80405bcf79 Add INET6 support for the upcalls to the nfsuserd daemon.
The kernel code uses UDP to do upcalls to the nfsuserd(8) daemon to get
updates to the username<->uid and groupname<->gid mappings.
A change to AF_LOCAL last year had to be reverted, since it could result
in vnode locking issues on the AF_LOCAL socket.
This patch adds INET6 support and the required #ifdef INET and INET6
to the code.

Requested by:	bz
PR:		205193
Reviewed by:	bz, rgrimes
MFC after:	2 weeks
Differential Revision:	http://reviews.freebsd.org/D19218
2019-04-06 21:53:46 +00:00
Rick Macklem
02c8dd7d72 Revert r320698, since the related userland changes were reverted by r338192.
r338192 reverted the changes to nfsuserd so that it could use an AF_LOCAL
socket, since it resulted in a vnode locking panic().
Post r338192 nfsuserd daemons use the old AF_INET socket for upcalls and
do not use these kernel changes.
I left them in for a while, so that nfsuserd daemons built from head sources
between r320757 (Jul. 6, 2017) and r338192 (Aug. 22, 2018) would need them
by default.
This only affects head, since the changes were never MFC'd.
I will add an UPDATING entry, since an nfsuserd daemon built from head
sources between r320757 and r338192 will not run unless the "-use-udpsock"
option is specified. (This command line option is only in the affected
revisions of the nfsuserd daemon.)

I suspect few will be affected by this, since most who run systems built
from head sources (not stable or releases) will have rebuilt their nfsuserd
daemon from sources post r338192 (Aug. 22, 2018)

This is being reverted in preparation for an update to include AF_INET6
support to the code.
2019-04-04 23:30:27 +00:00
Edward Tomasz Napierala
2df8bd90c8 Drop unused 'p' argument to nfsv4_strtogid().
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-12 15:07:47 +00:00
Edward Tomasz Napierala
c703cba811 Drop unused 'p' argument to nfsv4_gidtostr().
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-12 15:05:11 +00:00
Edward Tomasz Napierala
0658ac3943 Drop unused 'p' argument to nfsv4_strtouid().
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-12 15:02:52 +00:00
Edward Tomasz Napierala
0f86b94a56 Drop unused 'p' argument to nfsv4_uidtostr().
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-12 14:59:08 +00:00
Edward Tomasz Napierala
01c27978f5 Don't pass td to nfsvno_open().
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-04 14:50:00 +00:00
Edward Tomasz Napierala
127152fe56 Don't pass td to nfsvno_createsub().
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-04 14:30:53 +00:00
Edward Tomasz Napierala
5edc9102dc Don't pass td to nfsd_fhtovp(), it's unused.
Reviewed by:	rmacklem (earlier version)
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D19421
2019-03-04 13:18:04 +00:00
Edward Tomasz Napierala
af444b18ed Push down the thread argument in NFS server code, using curthread
instead of passing it explicitly. No functional changes

Reviewed by:	rmacklem (earlier version)
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D19419
2019-03-04 13:12:23 +00:00
Edward Tomasz Napierala
113aa93390 Push down td in nfsrvd_dorpc() - make it use curthread instead
of it being explicitly passed as an argument. No functional changes.

The big picture here is that I want to get rid of the 'td' argument
being passed everywhere, and this is the first piece that affects
the NFS server.

Reviewed by:	rmacklem
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D19417
2019-03-04 13:02:36 +00:00
Brooks Davis
1493c2ee62 Make vop_symlink take a const target path.
This will enable callers to take const paths as part of syscall
decleration improvements.

Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.

Bump __FreeBSD_version for external API consumers.

Reviewed by:	kib (prior version)
Obtained from:	CheriBSD
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D17805
2018-11-02 14:42:36 +00:00
Rick Macklem
a3e709cd33 Modify the NFSv4.1 server so that it allows ReclaimComplete as done by ESXi 6.7.
I believe that a ReclaimComplete with rca_one_fs == TRUE is only
to be used after a file system has been transferred to a different
file server.  However, RFC5661 is somewhat vague w.r.t. this and
the ESXi 6.7 client does both a ReclaimComplete with rca_one_fs == TRUE
and one with ReclaimComplete with rca_one_fs == FALSE.
Therefore, just ignore the rca_one_fs == TRUE operation and return
NFS_OK without doing anything instead of replying NFS4ERR_NOTSUPP.
This allows the ESXi 6.7 NFSv4.1 client to do a mount.
After discussion on the NFSv4 IETF working group mailing list, doing this
along with setting a flag to note that a ReclaimComplete with rca_one_fs TRUE
was an appropriate way to handle this.
The flag that indicates that a ReclaimComplete with rca_one_fs == TRUE was
done may be used to disable replies of NFS4ERR_GRACE for non-reclaim
state operations in a future commit.

This patch along with r332790, r334492 and r336357 allow ESXi 6.7 NFSv4.1 mounts
work ok. ESX 6.5 NFSv4.1 mounts do not work well, due to what I believe are
violations of RFC-5661 and should not be used.

Reported by:	andreas.nagy@frequentis.com
Tested by:	andreas.nagy@frequentis.com, daniel@ftml.net (earlier version)
MFC after:	2 weeks
Relnotes:	yes
2018-07-28 20:21:04 +00:00
Rick Macklem
5da3882447 Shut down the TCP connection to a DS in the pNFS client when Renew fails.
When a NFSv4.1 client mount using pNFS detects a failure trying to do a
Renew (actually just a Sequence operation), the code would simply try
again and again and again every 30sec.
This would tie up the "nfscl" thread, which should also be doing other
things like Renews on other DSs and the MDS.
This patch adds code which closes down the TCP connection and marks it
defunct when Renew detects an failure to communicate with the DS, so
further Renews will not be attempted until a new working TCP connection to
the DS is established.
It also makes the call to nfscl_cancelreqs() unconditional, since
nfscl_cancelreqs() checks the NFSCLDS_SAMECONN flag and does so while holding
the lock.
This fix only applies to the NFSv4.1 client whne using pNFS and without it
the only effect would have been an "nfscl" thread busy doing Renew attempts
on an unresponsive DS.

MFC after:	2 weeks
2018-07-15 18:54:44 +00:00
Rick Macklem
89c64a3a4f Fix the pNFS client when mirrors aren't on the same machine.
Without this patch, the client side NFSv4.1 pNFS code erroneously did writes
and commits to both DS mirrors using the TCP connection of the first one.
For my test setup this worked, since I have both DSs running on the same
machine, but it would have failed when the DSs are on separate machines.
This patch fixes the code to use the correct TCP connection for each DS.
This patch should only affect the NFSv4.1 client when using "pnfs" mounts
to mirrored DSs.

MFC after:	2 weeks
2018-07-14 19:51:44 +00:00
Rick Macklem
de9a1a70ab Add support for a "forced" pnfsdskill to the pNFS server kernel code.
The pnfsdskill(8) command will normally fail if there is no valid mirror
for the DS to be disabled. However, a system administrator may need to
disable a DS which does not have a valid mirror so that the nfsd threads
can be terminated. This patch adds the kernel code needed by pnfsdskill(8)
to implement this "forced" case of disabling a DS.
This patch only affects the pNFS server.
2018-07-09 19:58:01 +00:00
Rick Macklem
2e35b8fe24 Change the NFSv4.1 pNFS client so that it returns the DS error in layoutreturn.
When the NFSv4.1 pNFS client gets an error for a DS I/O operation using a
Flexible File layout, it returns the layout with an error.
This patch changes the code slightly, so that it returns the layout for all
errors except EACCES and lets the MDS decide what to do based on the error.
It also makes a couple of changes to nfscl_layoutrecall() to ensure that
the first layoutreturn(s) will have the error in the reply.
Plus, the patch adds a wakeup() so that the "nfscl" thread won't wait 1sec
before doing the LayoutReturn.
Tested against the pNFS service.
This patch should not affect non-pNFS use of the client.
The unused "dsp" argument will be used by a future patch that disables the
connection to the DS when possible.

MFC after:	2 weeks
2018-06-22 21:25:27 +00:00
Rick Macklem
2bad64241c Make the pNFS NFSv4.1 client return a Flexible File layout upon error.
The Flexible File layout LayoutReturn operation has argument fields where
an I/O error encountered when attempting I/O on a DS can be reported back
to the MDS.
This patch adds code to the client to do this for the Flexible File layout
mirrored case.
This patch should only affect mounts using the "pnfs" option against servers
that support the Flexible File layout.

MFC after:	2 weeks
2018-06-17 16:30:06 +00:00
Rick Macklem
c338c94d20 Move four functions in nfscl.ko to nfscommon.ko.
Four functions nfscl_reqstart(), nfscl_fillsattr(), nfsm_stateidtom()
and nfsmnt_mdssession() are now called from within the nfsd.
As such, they needed to be moved from nfscl.ko to nfscommon.ko so that
nfsd.ko would load when nfscl.ko wasn't loaded.

Reported by:	herbert@gojira.at
2018-06-14 10:00:19 +00:00
Rick Macklem
90d2dfab19 Merge the pNFS server code from projects/pnfs-planb-server into head.
This code merge adds a pNFS service to the NFSv4.1 server. Although it is
a large commit it should not affect behaviour for a non-pNFS NFS server.
Some documentation on how this works can be found at:
http://people.freebsd.org/~rmacklem/pnfs-planb-setup.txt
and will hopefully be turned into a proper document soon.
This is a merge of the kernel code. Userland and man page changes will
come soon, once the dust settles on this merge.
It has passed a "make universe", so I hope it will not cause build problems.
It also adds NFSv4.1 server support for the "current stateid".

Here is a brief overview of the pNFS service:
A pNFS service separates the Read/Write oeprations from all the other NFSv4.1
Metadata operations. It is hoped that this separation allows a pNFS service
to be configured that exceeds the limits of a single NFS server for either
storage capacity and/or I/O bandwidth.
It is possible to configure mirroring within the data servers (DSs) so that
the data storage file for an MDS file will be mirrored on two or more of
the DSs.
When this is used, failure of a DS will not stop the pNFS service and a
failed DS can be recovered once repaired while the pNFS service continues
to operate.  Although two way mirroring would be the norm, it is possible
to set a mirroring level of up to four or the number of DSs, whichever is
less.
The Metadata server will always be a single point of failure,
just as a single NFS server is.

A Plan B pNFS service consists of a single MetaData Server (MDS) and K
Data Servers (DS), all of which are recent FreeBSD systems.
Clients will mount the MDS as they would a single NFS server.
When files are created, the MDS creates a file tree identical to what a
single NFS server creates, except that all the regular (VREG) files will
be empty. As such, if you look at the exported tree on the MDS directly
on the MDS server (not via an NFS mount), the files will all be of size 0.
Each of these files will also have two extended attributes in the system
attribute name space:
pnfsd.dsfile - This extended attrbute stores the information that
    the MDS needs to find the data storage file(s) on DS(s) for this file.
pnfsd.dsattr - This extended attribute stores the Size, AccessTime, ModifyTime
    and Change attributes for the file, so that the MDS doesn't need to
    acquire the attributes from the DS for every Getattr operation.
For each regular (VREG) file, the MDS creates a data storage file on one
(or more if mirroring is enabled) of the DSs in one of the "dsNN"
subdirectories.  The name of this file is the file handle
of the file on the MDS in hexadecimal so that the name is unique.
The DSs use subdirectories named "ds0" to "dsN" so that no one directory
gets too large. The value of "N" is set via the sysctl vfs.nfsd.dsdirsize
on the MDS, with the default being 20.
For production servers that will store a lot of files, this value should
probably be much larger.
It can be increased when the "nfsd" daemon is not running on the MDS,
once the "dsK" directories are created.

For pNFS aware NFSv4.1 clients, the FreeBSD server will return two pieces
of information to the client that allows it to do I/O directly to the DS.
DeviceInfo - This is relatively static information that defines what a DS
             is. The critical bits of information returned by the FreeBSD
             server is the IP address of the DS and, for the Flexible
             File layout, that NFSv4.1 is to be used and that it is
             "tightly coupled".
             There is a "deviceid" which identifies the DeviceInfo.
Layout     - This is per file and can be recalled by the server when it
             is no longer valid. For the FreeBSD server, there is support
             for two types of layout, call File and Flexible File layout.
             Both allow the client to do I/O on the DS via NFSv4.1 I/O
             operations. The Flexible File layout is a more recent variant
             that allows specification of mirrors, where the client is
             expected to do writes to all mirrors to maintain them in a
             consistent state. The Flexible File layout also allows the
             client to report I/O errors for a DS back to the MDS.
             The Flexible File layout supports two variants referred to as
             "tightly coupled" vs "loosely coupled". The FreeBSD server always
             uses the "tightly coupled" variant where the client uses the
             same credentials to do I/O on the DS as it would on the MDS.
             For the "loosely coupled" variant, the layout specifies a
             synthetic user/group that the client uses to do I/O on the DS.
             The FreeBSD server does not do striping and always returns
             layouts for the entire file. The critical information in a layout
             is Read vs Read/Writea and DeviceID(s) that identify which
             DS(s) the data is stored on.

At this time, the MDS generates File Layout layouts to NFSv4.1 clients
that know how to do pNFS for the non-mirrored DS case unless the sysctl
vfs.nfsd.default_flexfile is set non-zero, in which case Flexible File
layouts are generated.
The mirrored DS configuration always generates Flexible File layouts.
For NFS clients that do not support NFSv4.1 pNFS, all I/O operations
are done against the MDS which acts as a proxy for the appropriate DS(s).
When the MDS receives an I/O RPC, it will do the RPC on the DS as a proxy.
If the DS is on the same machine, the MDS/DS will do the RPC on the DS as
a proxy and so on, until the machine runs out of some resource, such as
session slots or mbufs.
As such, DSs must be separate systems from the MDS.

Tested by:	james.rose@framestore.com
Relnotes:	yes
2018-06-12 19:36:32 +00:00
Rick Macklem
9442a64e53 Add the BindConnectiontoSession operation to the NFSv4.1 server.
Under some fairly unusual circumstances, the Linux NFSv4.1 client is
doing a BindConnectiontoSession operation for TCP connections.
It is also used by the ESXi6.5 NFSv4.1 client.
This patch adds this operation to the NFSv4.1 server.

Reported by:	andreas.nagy@frequentis.com
Tested by:	andreas.nagy@frequentis.com
MFC after:	2 weeks
2018-06-01 19:47:41 +00:00
Rick Macklem
5d4835e4b7 Add support for the TestStateID operation to the NFSv4.1 server.
The Linux client now uses the TestStateID operation, so this patch adds
support for it to the NFSv4.1 server. The FreeBSD client never uses this
operation, so it should not be affected.

MFC after:	2 months
2018-05-11 22:16:23 +00:00
John Baldwin
b1288166e0 Use long for the last argument to VOP_PATHCONF rather than a register_t.
pathconf(2) and fpathconf(2) both return a long.  The kern_[f]pathconf()
functions now accept a pointer to a long value rather than modifying
td_retval directly.  Instead, the system calls explicitly store the
returned long value in td_retval[0].

Requested by:	bde
Reviewed by:	kib
Sponsored by:	Chelsio Communications
2018-01-17 22:36:58 +00:00
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Rick Macklem
b949cc41d1 Add Flex File Layout support to the NFSv4.1 pNFS client.
This patch adds support for the Flexible File Layout to the pNFS client.
Although the patch is rather large, it should only affect NFS mounts
using the "pnfs" option against pNFS servers that do not support File
Layout.
There are still a couple of things missing from the Flexible File Layout
client implementation:
- The code does not yet do a LayoutReturn with I/O error stats when
  I/O error(s) occur when attempting to do I/O on a DS.
  This will be fixed in a future commit, since it is important for the
  MDS to know that I/O on a DS is failing.
- The current code does writes and commits to mirror DSs serially.
  Making them happen concurrently will be done in a future commit,
  after discussion on freebsd-current@ on the best way to do this.
- The code does not handle NFSv4.0 DSs. Since there is no extant pNFS
  server that implements NFSv4.0 DSs and NFSv4.1 DSs makes more sense
  now, I don't intend to implement this until there is a need for it.
  There is support for NFSv4.1 and NFSv3 DSs.
2017-10-05 20:10:40 +00:00
Rick Macklem
be3d32ad6e Change nfsv4_getipaddr() and nfsrpc_fillsa() to not use sockaddr_storage.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
2017-09-28 22:33:01 +00:00
Rick Macklem
a8462c582c Add major and minor version arguments to nfscl_reqstart().
This patch adds "vers" and "minorvers" arguments to nfscl_reqstart().
The patch always passes them in as "0" and that implies no change
in semantics. These arguments will be used by a future commit that
adds support for the Flexible File Layout.
2017-09-26 23:42:44 +00:00
Rick Macklem
0f29b8292d Make the nfsrpc_layoutget() function a static.
Make the NFSv4 pNFS client function nfsrpc_layoutget() a static, since it
is only used in sys/fs/nfsclient/nfs_clrpcops.c.
This prepares the code for future patches that add Flex File layout
support.
2017-09-19 23:28:22 +00:00
Rick Macklem
2742a21091 Add a new function called nfsm_uiombuflist(), similar to nfsm_uiombuf().
This patch adds a new function called nfsm_uiombuflist(), which is
similar to nfsm_uiombuf(), but doesn't not use the fields in
struct nfsrv_descript. This new function will be used by the pNFS client
for writing to mirrors using Flex Files layout.
The function is not yet called anywhere.
Also, get rid of #ifndef APPLE, which is ancient cruft left over from
the Mac OSX port of the NFSv4 client.
2017-09-19 21:31:36 +00:00
Rick Macklem
b0932afacc Simplify nfsrpc_layoutreturn() args.
Simplify nfsrpc_layoutreturn() args. in preparation for the addition
of Flex File layout support, since File layout uses a 0 length field.
Flex Files does use a longer field, but that will be added in a
subsequent commit.
2017-09-19 20:45:25 +00:00
Rick Macklem
ab118d04be Simplify nfsrpc_layoutcommit() args.
Simplify nfsrpc_layoutcommit() args. in preparation for the addition
of Flex File layout support, since it also uses a 0 length field.
2017-09-19 20:18:41 +00:00
Rick Macklem
25d694a6fa Add support for AF_LOCAL socket upcalls to the nfsuserd daemon.
This patch adds support for AF_LOCAL socket upcalls to an nfsuserd daemon
that supports them. A future patch to the nfsuserd daemon will use AF_LOCAL
sockets to avoid a problem when using upcalls to 127.0.0.1 if jails are
in use.

Suggested by:	dfr
PR:		205193
2017-07-06 00:53:12 +00:00
Rick Macklem
81b07aac10 Add support to the NFSv4.1/pNFS client for commits through the DS.
A NFSv4.1/pNFS server using File Layout can specify that Commit operations
are to be done against the DS instead of MDS. Since no extant pNFS
server did this, the code was untested and "#ifdef notyet".
The FreeBSD pNFS server I am developing does specify that Commits be done
through the DS, so the code has been enabled/tested.
This patch should only affect the case of a pNFS server that specfies
Commits through the DS.

PR:		219551
MFC after:	2 weeks
2017-06-26 00:43:04 +00:00