/* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /* * Lucent WaveLAN/IEEE 802.11 PCMCIA driver for FreeBSD. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The WaveLAN/IEEE adapter is the second generation of the WaveLAN * from Lucent. Unlike the older cards, the new ones are programmed * entirely via a firmware-driven controller called the Hermes. * Unfortunately, Lucent will not release the Hermes programming manual * without an NDA (if at all). What they do release is an API library * called the HCF (Hardware Control Functions) which is supposed to * do the device-specific operations of a device driver for you. The * publically available version of the HCF library (the 'HCF Light') is * a) extremely gross, b) lacks certain features, particularly support * for 802.11 frames, and c) is contaminated by the GNU Public License. * * This driver does not use the HCF or HCF Light at all. Instead, it * programs the Hermes controller directly, using information gleaned * from the HCF Light code and corresponding documentation. * * This driver supports both the PCMCIA and ISA versions of the * WaveLAN/IEEE cards. Note however that the ISA card isn't really * anything of the sort: it's actually a PCMCIA bridge adapter * that fits into an ISA slot, into which a PCMCIA WaveLAN card is * inserted. Consequently, you need to use the pccard support for * both the ISA and PCMCIA adapters. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if !defined(lint) static const char rcsid[] = "$FreeBSD$"; #endif static void wi_intr(void *); static void wi_reset(struct wi_softc *); static int wi_ioctl(struct ifnet *, u_long, caddr_t); static void wi_init(void *); static void wi_start(struct ifnet *); static void wi_stop(struct wi_softc *); static void wi_watchdog(struct ifnet *); static void wi_rxeof(struct wi_softc *); static void wi_txeof(struct wi_softc *, int); static void wi_update_stats(struct wi_softc *); static void wi_setmulti(struct wi_softc *); static int wi_cmd(struct wi_softc *, int, int, int, int); static int wi_read_record(struct wi_softc *, struct wi_ltv_gen *); static int wi_write_record(struct wi_softc *, struct wi_ltv_gen *); static int wi_read_data(struct wi_softc *, int, int, caddr_t, int); static int wi_write_data(struct wi_softc *, int, int, caddr_t, int); static int wi_seek(struct wi_softc *, int, int, int); static int wi_alloc_nicmem(struct wi_softc *, int, int *); static void wi_inquire(void *); static void wi_setdef(struct wi_softc *, struct wi_req *); static int wi_mgmt_xmit(struct wi_softc *, caddr_t, int); #ifdef WICACHE static void wi_cache_store(struct wi_softc *, struct ether_header *, struct mbuf *, unsigned short); #endif static int wi_get_cur_ssid(struct wi_softc *, char *, int *); static void wi_get_id(struct wi_softc *); static int wi_media_change(struct ifnet *); static void wi_media_status(struct ifnet *, struct ifmediareq *); static int wi_get_debug(struct wi_softc *, struct wi_req *); static int wi_set_debug(struct wi_softc *, struct wi_req *); devclass_t wi_devclass; struct wi_card_ident wi_card_ident[] = { /* CARD_ID CARD_NAME FIRM_TYPE */ { WI_NIC_LUCENT_ID, WI_NIC_LUCENT_STR, WI_LUCENT }, { WI_NIC_SONY_ID, WI_NIC_SONY_STR, WI_LUCENT }, { WI_NIC_LUCENT_EMB_ID, WI_NIC_LUCENT_EMB_STR, WI_LUCENT }, { WI_NIC_EVB2_ID, WI_NIC_EVB2_STR, WI_INTERSIL }, { WI_NIC_HWB3763_ID, WI_NIC_HWB3763_STR, WI_INTERSIL }, { WI_NIC_HWB3163_ID, WI_NIC_HWB3163_STR, WI_INTERSIL }, { WI_NIC_HWB3163B_ID, WI_NIC_HWB3163B_STR, WI_INTERSIL }, { WI_NIC_EVB3_ID, WI_NIC_EVB3_STR, WI_INTERSIL }, { WI_NIC_HWB1153_ID, WI_NIC_HWB1153_STR, WI_INTERSIL }, { WI_NIC_P2_SST_ID, WI_NIC_P2_SST_STR, WI_INTERSIL }, { WI_NIC_EVB2_SST_ID, WI_NIC_EVB2_SST_STR, WI_INTERSIL }, { WI_NIC_3842_EVA_ID, WI_NIC_3842_EVA_STR, WI_INTERSIL }, { WI_NIC_3842_PCMCIA_AMD_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL }, { WI_NIC_3842_PCMCIA_SST_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL }, { WI_NIC_3842_PCMCIA_ATM_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL }, { WI_NIC_3842_MINI_AMD_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL }, { WI_NIC_3842_MINI_SST_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL }, { WI_NIC_3842_MINI_ATM_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL }, { WI_NIC_3842_PCI_AMD_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL }, { WI_NIC_3842_PCI_SST_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL }, { WI_NIC_3842_PCI_ATM_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL }, { WI_NIC_P3_PCMCIA_AMD_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL }, { WI_NIC_P3_PCMCIA_SST_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL }, { WI_NIC_P3_MINI_AMD_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL }, { WI_NIC_P3_MINI_SST_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL }, { 0, NULL, 0 }, }; int wi_generic_detach(dev) device_t dev; { struct wi_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); WI_LOCK(sc); ifp = &sc->arpcom.ac_if; if (sc->wi_gone) { device_printf(dev, "already unloaded\n"); WI_UNLOCK(sc); return(ENODEV); } wi_stop(sc); /* Delete all remaining media. */ ifmedia_removeall(&sc->ifmedia); ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); bus_teardown_intr(dev, sc->irq, sc->wi_intrhand); wi_free(dev); sc->wi_gone = 1; WI_UNLOCK(sc); mtx_destroy(&sc->wi_mtx); return(0); } int wi_generic_attach(device_t dev) { struct wi_softc *sc; struct wi_ltv_macaddr mac; struct wi_ltv_gen gen; struct ifnet *ifp; int error; sc = device_get_softc(dev); ifp = &sc->arpcom.ac_if; error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, wi_intr, sc, &sc->wi_intrhand); if (error) { device_printf(dev, "bus_setup_intr() failed! (%d)\n", error); wi_free(dev); return (error); } mtx_init(&sc->wi_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE); WI_LOCK(sc); /* Reset the NIC. */ wi_reset(sc); /* * Read the station address. * And do it twice. I've seen PRISM-based cards that return * an error when trying to read it the first time, which causes * the probe to fail. */ mac.wi_type = WI_RID_MAC_NODE; mac.wi_len = 4; wi_read_record(sc, (struct wi_ltv_gen *)&mac); if ((error = wi_read_record(sc, (struct wi_ltv_gen *)&mac)) != 0) { device_printf(dev, "mac read failed %d\n", error); wi_free(dev); return (error); } bcopy((char *)&mac.wi_mac_addr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); device_printf(dev, "802.11 address: %6D\n", sc->arpcom.ac_enaddr, ":"); wi_get_id(sc); ifp->if_softc = sc; ifp->if_unit = sc->wi_unit; ifp->if_name = "wi"; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = wi_ioctl; ifp->if_output = ether_output; ifp->if_start = wi_start; ifp->if_watchdog = wi_watchdog; ifp->if_init = wi_init; ifp->if_baudrate = 10000000; ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; bzero(sc->wi_node_name, sizeof(sc->wi_node_name)); bcopy(WI_DEFAULT_NODENAME, sc->wi_node_name, sizeof(WI_DEFAULT_NODENAME) - 1); bzero(sc->wi_net_name, sizeof(sc->wi_net_name)); bcopy(WI_DEFAULT_NETNAME, sc->wi_net_name, sizeof(WI_DEFAULT_NETNAME) - 1); bzero(sc->wi_ibss_name, sizeof(sc->wi_ibss_name)); bcopy(WI_DEFAULT_IBSS, sc->wi_ibss_name, sizeof(WI_DEFAULT_IBSS) - 1); sc->wi_portnum = WI_DEFAULT_PORT; sc->wi_ptype = WI_PORTTYPE_BSS; sc->wi_ap_density = WI_DEFAULT_AP_DENSITY; sc->wi_rts_thresh = WI_DEFAULT_RTS_THRESH; sc->wi_tx_rate = WI_DEFAULT_TX_RATE; sc->wi_max_data_len = WI_DEFAULT_DATALEN; sc->wi_create_ibss = WI_DEFAULT_CREATE_IBSS; sc->wi_pm_enabled = WI_DEFAULT_PM_ENABLED; sc->wi_max_sleep = WI_DEFAULT_MAX_SLEEP; sc->wi_roaming = WI_DEFAULT_ROAMING; sc->wi_authtype = WI_DEFAULT_AUTHTYPE; /* * Read the default channel from the NIC. This may vary * depending on the country where the NIC was purchased, so * we can't hard-code a default and expect it to work for * everyone. */ gen.wi_type = WI_RID_OWN_CHNL; gen.wi_len = 2; wi_read_record(sc, &gen); sc->wi_channel = gen.wi_val; /* * Find out if we support WEP on this card. */ gen.wi_type = WI_RID_WEP_AVAIL; gen.wi_len = 2; wi_read_record(sc, &gen); sc->wi_has_wep = gen.wi_val; if (bootverbose) { device_printf(sc->dev, "%s:wi_has_wep = %d\n", __func__, sc->wi_has_wep); } bzero((char *)&sc->wi_stats, sizeof(sc->wi_stats)); wi_init(sc); wi_stop(sc); ifmedia_init(&sc->ifmedia, 0, wi_media_change, wi_media_status); /* XXX: Should read from card capabilities */ #define ADD(m, c) ifmedia_add(&sc->ifmedia, (m), (c), NULL) ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS1, IFM_IEEE80211_ADHOC, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS1, 0, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS2, IFM_IEEE80211_ADHOC, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS2, 0, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS5, IFM_IEEE80211_ADHOC, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS5, 0, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS11, IFM_IEEE80211_ADHOC, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_IEEE80211_DS11, 0, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_AUTO, IFM_IEEE80211_ADHOC, 0), 0); ADD(IFM_MAKEWORD(IFM_IEEE80211, IFM_AUTO, 0, 0), 0); #undef ADD ifmedia_set(&sc->ifmedia, IFM_MAKEWORD(IFM_IEEE80211, IFM_AUTO, 0, 0)); /* * Call MI attach routine. */ ether_ifattach(ifp, ETHER_BPF_SUPPORTED); callout_handle_init(&sc->wi_stat_ch); WI_UNLOCK(sc); return(0); } static void wi_get_id(sc) struct wi_softc *sc; { struct wi_ltv_ver ver; struct wi_card_ident *id; /* getting chip identity */ memset(&ver, 0, sizeof(ver)); ver.wi_type = WI_RID_CARD_ID; ver.wi_len = 5; wi_read_record(sc, (struct wi_ltv_gen *)&ver); device_printf(sc->dev, "using "); sc->sc_firmware_type = WI_NOTYPE; for (id = wi_card_ident; id->card_name != NULL; id++) { if (le16toh(ver.wi_ver[0]) == id->card_id) { printf("%s", id->card_name); sc->sc_firmware_type = id->firm_type; break; } } if (sc->sc_firmware_type == WI_NOTYPE) { if (le16toh(ver.wi_ver[0]) & 0x8000) { printf("Unknown PRISM2 chip"); sc->sc_firmware_type = WI_INTERSIL; } else { printf("Unknown Lucent chip"); sc->sc_firmware_type = WI_LUCENT; } } if (sc->sc_firmware_type != WI_LUCENT) { /* get primary firmware version */ memset(&ver, 0, sizeof(ver)); ver.wi_type = WI_RID_PRI_IDENTITY; ver.wi_len = 5; wi_read_record(sc, (struct wi_ltv_gen *)&ver); ver.wi_ver[1] = le16toh(ver.wi_ver[1]); ver.wi_ver[2] = le16toh(ver.wi_ver[2]); ver.wi_ver[3] = le16toh(ver.wi_ver[3]); sc->sc_pri_firmware_ver = ver.wi_ver[2] * 10000 + ver.wi_ver[3] * 100 + ver.wi_ver[1]; } /* get station firmware version */ memset(&ver, 0, sizeof(ver)); ver.wi_type = WI_RID_STA_IDENTITY; ver.wi_len = 5; wi_read_record(sc, (struct wi_ltv_gen *)&ver); ver.wi_ver[1] = le16toh(ver.wi_ver[1]); ver.wi_ver[2] = le16toh(ver.wi_ver[2]); ver.wi_ver[3] = le16toh(ver.wi_ver[3]); sc->sc_sta_firmware_ver = ver.wi_ver[2] * 10000 + ver.wi_ver[3] * 100 + ver.wi_ver[1]; if (sc->sc_firmware_type == WI_INTERSIL && (sc->sc_sta_firmware_ver == 10102 || sc->sc_sta_firmware_ver == 20102)) { struct wi_ltv_str sver; char *p; memset(&sver, 0, sizeof(sver)); sver.wi_type = WI_RID_SYMBOL_IDENTITY; sver.wi_len = 7; /* value should be "V2.00-11" */ if (wi_read_record(sc, (struct wi_ltv_gen *)&sver) == 0 && *(p = (char *)sver.wi_str) == 'V' && p[2] == '.' && p[5] == '-' && p[8] == '\0') { sc->sc_firmware_type = WI_SYMBOL; sc->sc_sta_firmware_ver = (p[1] - '0') * 10000 + (p[3] - '0') * 1000 + (p[4] - '0') * 100 + (p[6] - '0') * 10 + (p[7] - '0'); } } printf("\n"); device_printf(sc->dev, "%s Firmware: ", sc->sc_firmware_type == WI_LUCENT ? "Lucent" : (sc->sc_firmware_type == WI_SYMBOL ? "Symbol" : "Intersil")); /* * The primary firmware is only valid on Prism based chipsets * (INTERSIL or SYMBOL). */ if (sc->sc_firmware_type != WI_LUCENT) printf("Primary %u.%02u.%02u, ", sc->sc_pri_firmware_ver / 10000, (sc->sc_pri_firmware_ver % 10000) / 100, sc->sc_pri_firmware_ver % 100); printf("Station %u.%02u.%02u\n", sc->sc_sta_firmware_ver / 10000, (sc->sc_sta_firmware_ver % 10000) / 100, sc->sc_sta_firmware_ver % 100); return; } static void wi_rxeof(sc) struct wi_softc *sc; { struct ifnet *ifp; struct ether_header *eh; struct mbuf *m; int id; ifp = &sc->arpcom.ac_if; id = CSR_READ_2(sc, WI_RX_FID); /* * if we have the procframe flag set, disregard all this and just * read the data from the device. */ if (sc->wi_procframe || sc->wi_debug.wi_monitor) { struct wi_frame *rx_frame; int datlen, hdrlen; /* first allocate mbuf for packet storage */ MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { ifp->if_ierrors++; return; } MCLGET(m, M_DONTWAIT); if (!(m->m_flags & M_EXT)) { m_freem(m); ifp->if_ierrors++; return; } m->m_pkthdr.rcvif = ifp; /* now read wi_frame first so we know how much data to read */ if (wi_read_data(sc, id, 0, mtod(m, caddr_t), sizeof(struct wi_frame))) { m_freem(m); ifp->if_ierrors++; return; } rx_frame = mtod(m, struct wi_frame *); switch ((rx_frame->wi_status & WI_STAT_MAC_PORT) >> 8) { case 7: switch (rx_frame->wi_frame_ctl & WI_FCTL_FTYPE) { case WI_FTYPE_DATA: hdrlen = WI_DATA_HDRLEN; datlen = rx_frame->wi_dat_len + WI_FCS_LEN; break; case WI_FTYPE_MGMT: hdrlen = WI_MGMT_HDRLEN; datlen = rx_frame->wi_dat_len + WI_FCS_LEN; break; case WI_FTYPE_CTL: /* * prism2 cards don't pass control packets * down properly or consistently, so we'll only * pass down the header. */ hdrlen = WI_CTL_HDRLEN; datlen = 0; break; default: device_printf(sc->dev, "received packet of " "unknown type on port 7\n"); m_freem(m); ifp->if_ierrors++; return; } break; case 0: hdrlen = WI_DATA_HDRLEN; datlen = rx_frame->wi_dat_len + WI_FCS_LEN; break; default: device_printf(sc->dev, "received packet on invalid " "port (wi_status=0x%x)\n", rx_frame->wi_status); m_freem(m); ifp->if_ierrors++; return; } if ((hdrlen + datlen + 2) > MCLBYTES) { device_printf(sc->dev, "oversized packet received " "(wi_dat_len=%d, wi_status=0x%x)\n", datlen, rx_frame->wi_status); m_freem(m); ifp->if_ierrors++; return; } if (wi_read_data(sc, id, hdrlen, mtod(m, caddr_t) + hdrlen, datlen + 2)) { m_freem(m); ifp->if_ierrors++; return; } m->m_pkthdr.len = m->m_len = hdrlen + datlen; ifp->if_ipackets++; /* Handle BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp, m); m_freem(m); } else { struct wi_frame rx_frame; /* First read in the frame header */ if (wi_read_data(sc, id, 0, (caddr_t)&rx_frame, sizeof(rx_frame))) { ifp->if_ierrors++; return; } if (rx_frame.wi_status & WI_STAT_ERRSTAT) { ifp->if_ierrors++; return; } MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { ifp->if_ierrors++; return; } MCLGET(m, M_DONTWAIT); if (!(m->m_flags & M_EXT)) { m_freem(m); ifp->if_ierrors++; return; } eh = mtod(m, struct ether_header *); m->m_pkthdr.rcvif = ifp; if (rx_frame.wi_status == WI_STAT_1042 || rx_frame.wi_status == WI_STAT_TUNNEL || rx_frame.wi_status == WI_STAT_WMP_MSG) { if((rx_frame.wi_dat_len + WI_SNAPHDR_LEN) > MCLBYTES) { device_printf(sc->dev, "oversized packet received " "(wi_dat_len=%d, wi_status=0x%x)\n", rx_frame.wi_dat_len, rx_frame.wi_status); m_freem(m); ifp->if_ierrors++; return; } m->m_pkthdr.len = m->m_len = rx_frame.wi_dat_len + WI_SNAPHDR_LEN; #if 0 bcopy((char *)&rx_frame.wi_addr1, (char *)&eh->ether_dhost, ETHER_ADDR_LEN); if (sc->wi_ptype == WI_PORTTYPE_ADHOC) { bcopy((char *)&rx_frame.wi_addr2, (char *)&eh->ether_shost, ETHER_ADDR_LEN); } else { bcopy((char *)&rx_frame.wi_addr3, (char *)&eh->ether_shost, ETHER_ADDR_LEN); } #else bcopy((char *)&rx_frame.wi_dst_addr, (char *)&eh->ether_dhost, ETHER_ADDR_LEN); bcopy((char *)&rx_frame.wi_src_addr, (char *)&eh->ether_shost, ETHER_ADDR_LEN); #endif bcopy((char *)&rx_frame.wi_type, (char *)&eh->ether_type, ETHER_TYPE_LEN); if (wi_read_data(sc, id, WI_802_11_OFFSET, mtod(m, caddr_t) + sizeof(struct ether_header), m->m_len + 2)) { m_freem(m); ifp->if_ierrors++; return; } } else { if((rx_frame.wi_dat_len + sizeof(struct ether_header)) > MCLBYTES) { device_printf(sc->dev, "oversized packet received " "(wi_dat_len=%d, wi_status=0x%x)\n", rx_frame.wi_dat_len, rx_frame.wi_status); m_freem(m); ifp->if_ierrors++; return; } m->m_pkthdr.len = m->m_len = rx_frame.wi_dat_len + sizeof(struct ether_header); if (wi_read_data(sc, id, WI_802_3_OFFSET, mtod(m, caddr_t), m->m_len + 2)) { m_freem(m); ifp->if_ierrors++; return; } } ifp->if_ipackets++; /* Receive packet. */ m_adj(m, sizeof(struct ether_header)); #ifdef WICACHE wi_cache_store(sc, eh, m, rx_frame.wi_q_info); #endif ether_input(ifp, eh, m); } } static void wi_txeof(sc, status) struct wi_softc *sc; int status; { struct ifnet *ifp; ifp = &sc->arpcom.ac_if; ifp->if_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; if (status & WI_EV_TX_EXC) ifp->if_oerrors++; else ifp->if_opackets++; return; } void wi_inquire(xsc) void *xsc; { struct wi_softc *sc; struct ifnet *ifp; sc = xsc; ifp = &sc->arpcom.ac_if; sc->wi_stat_ch = timeout(wi_inquire, sc, hz * 60); /* Don't do this while we're transmitting */ if (ifp->if_flags & IFF_OACTIVE) return; wi_cmd(sc, WI_CMD_INQUIRE, WI_INFO_COUNTERS, 0, 0); return; } void wi_update_stats(sc) struct wi_softc *sc; { struct wi_ltv_gen gen; u_int16_t id; struct ifnet *ifp; u_int32_t *ptr; int len, i; u_int16_t t; ifp = &sc->arpcom.ac_if; id = CSR_READ_2(sc, WI_INFO_FID); wi_read_data(sc, id, 0, (char *)&gen, 4); /* * if we just got our scan results, copy it over into the scan buffer * so we can return it to anyone that asks for it. (add a little * compatibility with the prism2 scanning mechanism) */ if (gen.wi_type == WI_INFO_SCAN_RESULTS) { sc->wi_scanbuf_len = gen.wi_len; wi_read_data(sc, id, 4, (char *)sc->wi_scanbuf, sc->wi_scanbuf_len * 2); return; } else if (gen.wi_type != WI_INFO_COUNTERS) return; len = (gen.wi_len - 1 < sizeof(sc->wi_stats) / 4) ? gen.wi_len - 1 : sizeof(sc->wi_stats) / 4; ptr = (u_int32_t *)&sc->wi_stats; for (i = 0; i < len - 1; i++) { t = CSR_READ_2(sc, WI_DATA1); #ifdef WI_HERMES_STATS_WAR if (t > 0xF000) t = ~t & 0xFFFF; #endif ptr[i] += t; } ifp->if_collisions = sc->wi_stats.wi_tx_single_retries + sc->wi_stats.wi_tx_multi_retries + sc->wi_stats.wi_tx_retry_limit; return; } static void wi_intr(xsc) void *xsc; { struct wi_softc *sc = xsc; struct ifnet *ifp; u_int16_t status; WI_LOCK(sc); ifp = &sc->arpcom.ac_if; if (sc->wi_gone || !(ifp->if_flags & IFF_UP)) { CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF); CSR_WRITE_2(sc, WI_INT_EN, 0); WI_UNLOCK(sc); return; } /* Disable interrupts. */ CSR_WRITE_2(sc, WI_INT_EN, 0); status = CSR_READ_2(sc, WI_EVENT_STAT); CSR_WRITE_2(sc, WI_EVENT_ACK, ~WI_INTRS); if (status & WI_EV_RX) { wi_rxeof(sc); CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX); } if (status & WI_EV_TX) { wi_txeof(sc, status); CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_TX); } if (status & WI_EV_ALLOC) { int id; id = CSR_READ_2(sc, WI_ALLOC_FID); CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC); if (id == sc->wi_tx_data_id) wi_txeof(sc, status); } if (status & WI_EV_INFO) { wi_update_stats(sc); CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_INFO); } if (status & WI_EV_TX_EXC) { wi_txeof(sc, status); CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_TX_EXC); } if (status & WI_EV_INFO_DROP) { CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_INFO_DROP); } /* Re-enable interrupts. */ CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS); if (ifp->if_snd.ifq_head != NULL) { wi_start(ifp); } WI_UNLOCK(sc); return; } static int wi_cmd(sc, cmd, val0, val1, val2) struct wi_softc *sc; int cmd; int val0; int val1; int val2; { int i, s = 0; /* wait for the busy bit to clear */ for (i = 500; i > 0; i--) { /* 5s */ if (!(CSR_READ_2(sc, WI_COMMAND) & WI_CMD_BUSY)) { break; } DELAY(10*1000); /* 10 m sec */ } if (i == 0) { device_printf(sc->dev, "wi_cmd: busy bit won't clear.\n" ); return(ETIMEDOUT); } CSR_WRITE_2(sc, WI_PARAM0, val0); CSR_WRITE_2(sc, WI_PARAM1, val1); CSR_WRITE_2(sc, WI_PARAM2, val2); CSR_WRITE_2(sc, WI_COMMAND, cmd); for (i = 0; i < WI_TIMEOUT; i++) { /* * Wait for 'command complete' bit to be * set in the event status register. */ s = CSR_READ_2(sc, WI_EVENT_STAT); if (s & WI_EV_CMD) { /* Ack the event and read result code. */ s = CSR_READ_2(sc, WI_STATUS); CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_CMD); #ifdef foo if ((s & WI_CMD_CODE_MASK) != (cmd & WI_CMD_CODE_MASK)) return(EIO); #endif if (s & WI_STAT_CMD_RESULT) return(EIO); break; } DELAY(WI_DELAY); } if (i == WI_TIMEOUT) { device_printf(sc->dev, "timeout in wi_cmd 0x%04x; event status 0x%04x\n", cmd, s); return(ETIMEDOUT); } return(0); } static void wi_reset(sc) struct wi_softc *sc; { #define WI_INIT_TRIES 5 int i; int tries; /* Symbol firmware cannot be initialized more than once */ if (sc->sc_firmware_type == WI_SYMBOL && sc->sc_enabled) return; if (sc->sc_firmware_type == WI_SYMBOL) tries = 1; else tries = WI_INIT_TRIES; for (i = 0; i < tries; i++) { if (wi_cmd(sc, WI_CMD_INI, 0, 0, 0) == 0) break; DELAY(WI_DELAY * 1000); } if (i == WI_INIT_TRIES) device_printf(sc->dev, "init failed\n"); CSR_WRITE_2(sc, WI_INT_EN, 0); CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF); /* Calibrate timer. */ WI_SETVAL(WI_RID_TICK_TIME, 8); sc->sc_enabled = 1; return; } /* * Read an LTV record from the NIC. */ static int wi_read_record(sc, ltv) struct wi_softc *sc; struct wi_ltv_gen *ltv; { u_int16_t *ptr; int i, len, code; struct wi_ltv_gen *oltv, p2ltv; oltv = ltv; if (sc->sc_firmware_type != WI_LUCENT) { switch (ltv->wi_type) { case WI_RID_ENCRYPTION: p2ltv.wi_type = WI_RID_P2_ENCRYPTION; p2ltv.wi_len = 2; ltv = &p2ltv; break; case WI_RID_TX_CRYPT_KEY: p2ltv.wi_type = WI_RID_P2_TX_CRYPT_KEY; p2ltv.wi_len = 2; ltv = &p2ltv; break; } } /* Tell the NIC to enter record read mode. */ if (wi_cmd(sc, WI_CMD_ACCESS|WI_ACCESS_READ, ltv->wi_type, 0, 0)) return(EIO); /* Seek to the record. */ if (wi_seek(sc, ltv->wi_type, 0, WI_BAP1)) return(EIO); /* * Read the length and record type and make sure they * match what we expect (this verifies that we have enough * room to hold all of the returned data). */ len = CSR_READ_2(sc, WI_DATA1); if (len > ltv->wi_len) return(ENOSPC); code = CSR_READ_2(sc, WI_DATA1); if (code != ltv->wi_type) return(EIO); ltv->wi_len = len; ltv->wi_type = code; /* Now read the data. */ ptr = <v->wi_val; for (i = 0; i < ltv->wi_len - 1; i++) ptr[i] = CSR_READ_2(sc, WI_DATA1); if (sc->sc_firmware_type != WI_LUCENT) { switch (oltv->wi_type) { case WI_RID_TX_RATE: case WI_RID_CUR_TX_RATE: switch (ltv->wi_val) { case 1: oltv->wi_val = 1; break; case 2: oltv->wi_val = 2; break; case 3: oltv->wi_val = 6; break; case 4: oltv->wi_val = 5; break; case 7: oltv->wi_val = 7; break; case 8: oltv->wi_val = 11; break; case 15: oltv->wi_val = 3; break; default: oltv->wi_val = 0x100 + ltv->wi_val; break; } break; case WI_RID_ENCRYPTION: oltv->wi_len = 2; if (ltv->wi_val & 0x01) oltv->wi_val = 1; else oltv->wi_val = 0; break; case WI_RID_TX_CRYPT_KEY: oltv->wi_len = 2; oltv->wi_val = ltv->wi_val; break; case WI_RID_AUTH_CNTL: oltv->wi_len = 2; if (le16toh(ltv->wi_val) & 0x01) oltv->wi_val = htole16(1); else if (le16toh(ltv->wi_val) & 0x02) oltv->wi_val = htole16(2); break; } } return(0); } /* * Same as read, except we inject data instead of reading it. */ static int wi_write_record(sc, ltv) struct wi_softc *sc; struct wi_ltv_gen *ltv; { u_int16_t *ptr; int i; struct wi_ltv_gen p2ltv; if (sc->sc_firmware_type != WI_LUCENT) { switch (ltv->wi_type) { case WI_RID_TX_RATE: p2ltv.wi_type = WI_RID_TX_RATE; p2ltv.wi_len = 2; switch (ltv->wi_val) { case 1: p2ltv.wi_val = 1; break; case 2: p2ltv.wi_val = 2; break; case 3: p2ltv.wi_val = 15; break; case 5: p2ltv.wi_val = 4; break; case 6: p2ltv.wi_val = 3; break; case 7: p2ltv.wi_val = 7; break; case 11: p2ltv.wi_val = 8; break; default: return EINVAL; } ltv = &p2ltv; break; case WI_RID_ENCRYPTION: p2ltv.wi_type = WI_RID_P2_ENCRYPTION; p2ltv.wi_len = 2; if (le16toh(ltv->wi_val)) p2ltv.wi_val =htole16(PRIVACY_INVOKED | EXCLUDE_UNENCRYPTED); else p2ltv.wi_val = htole16(HOST_ENCRYPT | HOST_DECRYPT); ltv = &p2ltv; break; case WI_RID_TX_CRYPT_KEY: p2ltv.wi_type = WI_RID_P2_TX_CRYPT_KEY; p2ltv.wi_len = 2; p2ltv.wi_val = ltv->wi_val; ltv = &p2ltv; break; case WI_RID_DEFLT_CRYPT_KEYS: { int error; int keylen; struct wi_ltv_str ws; struct wi_ltv_keys *wk = (struct wi_ltv_keys *)ltv; keylen = wk->wi_keys[sc->wi_tx_key].wi_keylen; for (i = 0; i < 4; i++) { bzero(&ws, sizeof(ws)); ws.wi_len = (keylen > 5) ? 8 : 4; ws.wi_type = WI_RID_P2_CRYPT_KEY0 + i; memcpy(ws.wi_str, &wk->wi_keys[i].wi_keydat, keylen); error = wi_write_record(sc, (struct wi_ltv_gen *)&ws); if (error) return error; } return 0; } case WI_RID_AUTH_CNTL: p2ltv.wi_type = WI_RID_AUTH_CNTL; p2ltv.wi_len = 2; if (le16toh(ltv->wi_val) == 1) p2ltv.wi_val = htole16(0x01); else if (le16toh(ltv->wi_val) == 2) p2ltv.wi_val = htole16(0x02); ltv = &p2ltv; break; } } if (wi_seek(sc, ltv->wi_type, 0, WI_BAP1)) return(EIO); CSR_WRITE_2(sc, WI_DATA1, ltv->wi_len); CSR_WRITE_2(sc, WI_DATA1, ltv->wi_type); ptr = <v->wi_val; for (i = 0; i < ltv->wi_len - 1; i++) CSR_WRITE_2(sc, WI_DATA1, ptr[i]); if (wi_cmd(sc, WI_CMD_ACCESS|WI_ACCESS_WRITE, ltv->wi_type, 0, 0)) return(EIO); return(0); } static int wi_seek(sc, id, off, chan) struct wi_softc *sc; int id, off, chan; { int i; int selreg, offreg; int status; switch (chan) { case WI_BAP0: selreg = WI_SEL0; offreg = WI_OFF0; break; case WI_BAP1: selreg = WI_SEL1; offreg = WI_OFF1; break; default: device_printf(sc->dev, "invalid data path: %x\n", chan); return(EIO); } CSR_WRITE_2(sc, selreg, id); CSR_WRITE_2(sc, offreg, off); for (i = 0; i < WI_TIMEOUT; i++) { status = CSR_READ_2(sc, offreg); if (!(status & (WI_OFF_BUSY|WI_OFF_ERR))) break; DELAY(WI_DELAY); } if (i == WI_TIMEOUT) { device_printf(sc->dev, "timeout in wi_seek to %x/%x; last status %x\n", id, off, status); return(ETIMEDOUT); } return(0); } static int wi_read_data(sc, id, off, buf, len) struct wi_softc *sc; int id, off; caddr_t buf; int len; { int i; u_int16_t *ptr; if (wi_seek(sc, id, off, WI_BAP1)) return(EIO); ptr = (u_int16_t *)buf; for (i = 0; i < len / 2; i++) ptr[i] = CSR_READ_2(sc, WI_DATA1); return(0); } /* * According to the comments in the HCF Light code, there is a bug in * the Hermes (or possibly in certain Hermes firmware revisions) where * the chip's internal autoincrement counter gets thrown off during * data writes: the autoincrement is missed, causing one data word to * be overwritten and subsequent words to be written to the wrong memory * locations. The end result is that we could end up transmitting bogus * frames without realizing it. The workaround for this is to write a * couple of extra guard words after the end of the transfer, then * attempt to read then back. If we fail to locate the guard words where * we expect them, we preform the transfer over again. */ static int wi_write_data(sc, id, off, buf, len) struct wi_softc *sc; int id, off; caddr_t buf; int len; { int i; u_int16_t *ptr; #ifdef WI_HERMES_AUTOINC_WAR int retries; retries = 512; again: #endif if (wi_seek(sc, id, off, WI_BAP0)) return(EIO); ptr = (u_int16_t *)buf; for (i = 0; i < (len / 2); i++) CSR_WRITE_2(sc, WI_DATA0, ptr[i]); #ifdef WI_HERMES_AUTOINC_WAR CSR_WRITE_2(sc, WI_DATA0, 0x1234); CSR_WRITE_2(sc, WI_DATA0, 0x5678); if (wi_seek(sc, id, off + len, WI_BAP0)) return(EIO); if (CSR_READ_2(sc, WI_DATA0) != 0x1234 || CSR_READ_2(sc, WI_DATA0) != 0x5678) { if (--retries >= 0) goto again; device_printf(sc->dev, "wi_write_data device timeout\n"); return (EIO); } #endif return(0); } /* * Allocate a region of memory inside the NIC and zero * it out. */ static int wi_alloc_nicmem(sc, len, id) struct wi_softc *sc; int len; int *id; { int i; if (wi_cmd(sc, WI_CMD_ALLOC_MEM, len, 0, 0)) { device_printf(sc->dev, "failed to allocate %d bytes on NIC\n", len); return(ENOMEM); } for (i = 0; i < WI_TIMEOUT; i++) { if (CSR_READ_2(sc, WI_EVENT_STAT) & WI_EV_ALLOC) break; DELAY(WI_DELAY); } if (i == WI_TIMEOUT) { device_printf(sc->dev, "time out allocating memory on card\n"); return(ETIMEDOUT); } CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC); *id = CSR_READ_2(sc, WI_ALLOC_FID); if (wi_seek(sc, *id, 0, WI_BAP0)) { device_printf(sc->dev, "seek failed while allocating memory on card\n"); return(EIO); } for (i = 0; i < len / 2; i++) CSR_WRITE_2(sc, WI_DATA0, 0); return(0); } static void wi_setmulti(sc) struct wi_softc *sc; { struct ifnet *ifp; int i = 0; struct ifmultiaddr *ifma; struct wi_ltv_mcast mcast; ifp = &sc->arpcom.ac_if; bzero((char *)&mcast, sizeof(mcast)); mcast.wi_type = WI_RID_MCAST_LIST; mcast.wi_len = (3 * 16) + 1; if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { wi_write_record(sc, (struct wi_ltv_gen *)&mcast); return; } TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; if (i < 16) { bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), (char *)&mcast.wi_mcast[i], ETHER_ADDR_LEN); i++; } else { bzero((char *)&mcast, sizeof(mcast)); break; } } mcast.wi_len = (i * 3) + 1; wi_write_record(sc, (struct wi_ltv_gen *)&mcast); return; } static void wi_setdef(sc, wreq) struct wi_softc *sc; struct wi_req *wreq; { struct sockaddr_dl *sdl; struct ifaddr *ifa; struct ifnet *ifp; ifp = &sc->arpcom.ac_if; switch(wreq->wi_type) { case WI_RID_MAC_NODE: ifa = ifaddr_byindex(ifp->if_index); sdl = (struct sockaddr_dl *)ifa->ifa_addr; bcopy((char *)&wreq->wi_val, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); bcopy((char *)&wreq->wi_val, LLADDR(sdl), ETHER_ADDR_LEN); break; case WI_RID_PORTTYPE: sc->wi_ptype = le16toh(wreq->wi_val[0]); break; case WI_RID_TX_RATE: sc->wi_tx_rate = le16toh(wreq->wi_val[0]); break; case WI_RID_MAX_DATALEN: sc->wi_max_data_len = le16toh(wreq->wi_val[0]); break; case WI_RID_RTS_THRESH: sc->wi_rts_thresh = le16toh(wreq->wi_val[0]); break; case WI_RID_SYSTEM_SCALE: sc->wi_ap_density = le16toh(wreq->wi_val[0]); break; case WI_RID_CREATE_IBSS: sc->wi_create_ibss = le16toh(wreq->wi_val[0]); break; case WI_RID_OWN_CHNL: sc->wi_channel = le16toh(wreq->wi_val[0]); break; case WI_RID_NODENAME: bzero(sc->wi_node_name, sizeof(sc->wi_node_name)); bcopy((char *)&wreq->wi_val[1], sc->wi_node_name, 30); break; case WI_RID_DESIRED_SSID: bzero(sc->wi_net_name, sizeof(sc->wi_net_name)); bcopy((char *)&wreq->wi_val[1], sc->wi_net_name, 30); break; case WI_RID_OWN_SSID: bzero(sc->wi_ibss_name, sizeof(sc->wi_ibss_name)); bcopy((char *)&wreq->wi_val[1], sc->wi_ibss_name, 30); break; case WI_RID_PM_ENABLED: sc->wi_pm_enabled = le16toh(wreq->wi_val[0]); break; case WI_RID_MICROWAVE_OVEN: sc->wi_mor_enabled = le16toh(wreq->wi_val[0]); break; case WI_RID_MAX_SLEEP: sc->wi_max_sleep = le16toh(wreq->wi_val[0]); break; case WI_RID_AUTH_CNTL: sc->wi_authtype = le16toh(wreq->wi_val[0]); break; case WI_RID_ROAMING_MODE: sc->wi_roaming = le16toh(wreq->wi_val[0]); break; case WI_RID_ENCRYPTION: sc->wi_use_wep = le16toh(wreq->wi_val[0]); break; case WI_RID_TX_CRYPT_KEY: sc->wi_tx_key = le16toh(wreq->wi_val[0]); break; case WI_RID_DEFLT_CRYPT_KEYS: bcopy((char *)wreq, (char *)&sc->wi_keys, sizeof(struct wi_ltv_keys)); break; default: break; } /* Reinitialize WaveLAN. */ wi_init(sc); return; } static int wi_ioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { int error = 0; int len; u_int8_t tmpkey[14]; char tmpssid[IEEE80211_NWID_LEN]; struct wi_softc *sc; struct wi_req wreq; struct ifreq *ifr; struct ieee80211req *ireq; struct thread *td = curthread; sc = ifp->if_softc; WI_LOCK(sc); ifr = (struct ifreq *)data; ireq = (struct ieee80211req *)data; if (sc->wi_gone) { error = ENODEV; goto out; } switch(command) { case SIOCSIFADDR: case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, command, data); break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { if (ifp->if_flags & IFF_RUNNING && ifp->if_flags & IFF_PROMISC && !(sc->wi_if_flags & IFF_PROMISC)) { WI_SETVAL(WI_RID_PROMISC, 1); } else if (ifp->if_flags & IFF_RUNNING && !(ifp->if_flags & IFF_PROMISC) && sc->wi_if_flags & IFF_PROMISC) { WI_SETVAL(WI_RID_PROMISC, 0); } else wi_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) { wi_stop(sc); } } sc->wi_if_flags = ifp->if_flags; error = 0; break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command); break; case SIOCADDMULTI: case SIOCDELMULTI: wi_setmulti(sc); error = 0; break; case SIOCGWAVELAN: error = copyin(ifr->ifr_data, &wreq, sizeof(wreq)); if (error) break; if (wreq.wi_len > WI_MAX_DATALEN) { error = EINVAL; break; } /* Don't show WEP keys to non-root users. */ if (wreq.wi_type == WI_RID_DEFLT_CRYPT_KEYS && suser(td)) break; if (wreq.wi_type == WI_RID_IFACE_STATS) { bcopy((char *)&sc->wi_stats, (char *)&wreq.wi_val, sizeof(sc->wi_stats)); wreq.wi_len = (sizeof(sc->wi_stats) / 2) + 1; } else if (wreq.wi_type == WI_RID_DEFLT_CRYPT_KEYS) { bcopy((char *)&sc->wi_keys, (char *)&wreq, sizeof(struct wi_ltv_keys)); } #ifdef WICACHE else if (wreq.wi_type == WI_RID_ZERO_CACHE) { sc->wi_sigitems = sc->wi_nextitem = 0; } else if (wreq.wi_type == WI_RID_READ_CACHE) { char *pt = (char *)&wreq.wi_val; bcopy((char *)&sc->wi_sigitems, (char *)pt, sizeof(int)); pt += (sizeof (int)); wreq.wi_len = sizeof(int) / 2; bcopy((char *)&sc->wi_sigcache, (char *)pt, sizeof(struct wi_sigcache) * sc->wi_sigitems); wreq.wi_len += ((sizeof(struct wi_sigcache) * sc->wi_sigitems) / 2) + 1; } #endif else if (wreq.wi_type == WI_RID_PROCFRAME) { wreq.wi_len = 2; wreq.wi_val[0] = sc->wi_procframe; } else if (wreq.wi_type == WI_RID_PRISM2) { wreq.wi_len = 2; wreq.wi_val[0] = sc->sc_firmware_type != WI_LUCENT; } else if (wreq.wi_type == WI_RID_SCAN_RES && sc->sc_firmware_type == WI_LUCENT) { memcpy((char *)wreq.wi_val, (char *)sc->wi_scanbuf, sc->wi_scanbuf_len * 2); wreq.wi_len = sc->wi_scanbuf_len; } else { if (wi_read_record(sc, (struct wi_ltv_gen *)&wreq)) { error = EINVAL; break; } } error = copyout(&wreq, ifr->ifr_data, sizeof(wreq)); break; case SIOCSWAVELAN: if ((error = suser(td))) goto out; error = copyin(ifr->ifr_data, &wreq, sizeof(wreq)); if (error) break; if (wreq.wi_len > WI_MAX_DATALEN) { error = EINVAL; break; } if (wreq.wi_type == WI_RID_IFACE_STATS) { error = EINVAL; break; } else if (wreq.wi_type == WI_RID_MGMT_XMIT) { error = wi_mgmt_xmit(sc, (caddr_t)&wreq.wi_val, wreq.wi_len); } else if (wreq.wi_type == WI_RID_PROCFRAME) { sc->wi_procframe = wreq.wi_val[0]; /* * if we're getting a scan request from a wavelan card * (non-prism2), send out a cmd_inquire to the card to scan * results for the scan will be received through the info * interrupt handler. otherwise the scan request can be * directly handled by a prism2 card's rid interface. */ } else if (wreq.wi_type == WI_RID_SCAN_REQ && sc->sc_firmware_type == WI_LUCENT) { wi_cmd(sc, WI_CMD_INQUIRE, WI_INFO_SCAN_RESULTS, 0, 0); } else { error = wi_write_record(sc, (struct wi_ltv_gen *)&wreq); if (!error) wi_setdef(sc, &wreq); } break; case SIOCGPRISM2DEBUG: error = copyin(ifr->ifr_data, &wreq, sizeof(wreq)); if (error) break; if (!(ifp->if_flags & IFF_RUNNING) || sc->sc_firmware_type == WI_LUCENT) { error = EIO; break; } error = wi_get_debug(sc, &wreq); if (error == 0) error = copyout(&wreq, ifr->ifr_data, sizeof(wreq)); break; case SIOCSPRISM2DEBUG: if ((error = suser(td))) goto out; error = copyin(ifr->ifr_data, &wreq, sizeof(wreq)); if (error) break; error = wi_set_debug(sc, &wreq); break; case SIOCG80211: switch(ireq->i_type) { case IEEE80211_IOC_SSID: if(ireq->i_val == -1) { bzero(tmpssid, IEEE80211_NWID_LEN); error = wi_get_cur_ssid(sc, tmpssid, &len); if (error != 0) break; error = copyout(tmpssid, ireq->i_data, IEEE80211_NWID_LEN); ireq->i_len = len; } else if (ireq->i_val == 0) { error = copyout(sc->wi_net_name, ireq->i_data, IEEE80211_NWID_LEN); ireq->i_len = IEEE80211_NWID_LEN; } else error = EINVAL; break; case IEEE80211_IOC_NUMSSIDS: ireq->i_val = 1; break; case IEEE80211_IOC_WEP: if(!sc->wi_has_wep) { ireq->i_val = IEEE80211_WEP_NOSUP; } else { if(sc->wi_use_wep) { ireq->i_val = IEEE80211_WEP_MIXED; } else { ireq->i_val = IEEE80211_WEP_OFF; } } break; case IEEE80211_IOC_WEPKEY: if(!sc->wi_has_wep || ireq->i_val < 0 || ireq->i_val > 3) { error = EINVAL; break; } len = sc->wi_keys.wi_keys[ireq->i_val].wi_keylen; if (suser(td)) bcopy(sc->wi_keys.wi_keys[ireq->i_val].wi_keydat, tmpkey, len); else bzero(tmpkey, len); ireq->i_len = len; error = copyout(tmpkey, ireq->i_data, len); break; case IEEE80211_IOC_NUMWEPKEYS: if(!sc->wi_has_wep) error = EINVAL; else ireq->i_val = 4; break; case IEEE80211_IOC_WEPTXKEY: if(!sc->wi_has_wep) error = EINVAL; else ireq->i_val = sc->wi_tx_key; break; case IEEE80211_IOC_AUTHMODE: ireq->i_val = IEEE80211_AUTH_NONE; break; case IEEE80211_IOC_STATIONNAME: error = copyout(sc->wi_node_name, ireq->i_data, IEEE80211_NWID_LEN); ireq->i_len = IEEE80211_NWID_LEN; break; case IEEE80211_IOC_CHANNEL: wreq.wi_type = WI_RID_CURRENT_CHAN; wreq.wi_len = WI_MAX_DATALEN; if (wi_read_record(sc, (struct wi_ltv_gen *)&wreq)) error = EINVAL; else { ireq->i_val = wreq.wi_val[0]; } break; case IEEE80211_IOC_POWERSAVE: if(sc->wi_pm_enabled) ireq->i_val = IEEE80211_POWERSAVE_ON; else ireq->i_val = IEEE80211_POWERSAVE_OFF; break; case IEEE80211_IOC_POWERSAVESLEEP: ireq->i_val = sc->wi_max_sleep; break; default: error = EINVAL; } break; case SIOCS80211: if ((error = suser(td))) goto out; switch(ireq->i_type) { case IEEE80211_IOC_SSID: if (ireq->i_val != 0 || ireq->i_len > IEEE80211_NWID_LEN) { error = EINVAL; break; } /* We set both of them */ bzero(sc->wi_net_name, IEEE80211_NWID_LEN); error = copyin(ireq->i_data, sc->wi_net_name, ireq->i_len); bcopy(sc->wi_net_name, sc->wi_ibss_name, IEEE80211_NWID_LEN); break; case IEEE80211_IOC_WEP: /* * These cards only support one mode so * we just turn wep on what ever is * passed in if it's not OFF. */ if (ireq->i_val == IEEE80211_WEP_OFF) { sc->wi_use_wep = 0; } else { sc->wi_use_wep = 1; } break; case IEEE80211_IOC_WEPKEY: if (ireq->i_val < 0 || ireq->i_val > 3 || ireq->i_len > 13) { error = EINVAL; break; } bzero(sc->wi_keys.wi_keys[ireq->i_val].wi_keydat, 13); error = copyin(ireq->i_data, sc->wi_keys.wi_keys[ireq->i_val].wi_keydat, ireq->i_len); if(error) break; sc->wi_keys.wi_keys[ireq->i_val].wi_keylen = ireq->i_len; break; case IEEE80211_IOC_WEPTXKEY: if (ireq->i_val < 0 || ireq->i_val > 3) { error = EINVAL; break; } sc->wi_tx_key = ireq->i_val; break; case IEEE80211_IOC_AUTHMODE: error = EINVAL; break; case IEEE80211_IOC_STATIONNAME: if (ireq->i_len > 32) { error = EINVAL; break; } bzero(sc->wi_node_name, 32); error = copyin(ireq->i_data, sc->wi_node_name, ireq->i_len); break; case IEEE80211_IOC_CHANNEL: /* * The actual range is 1-14, but if you * set it to 0 you get the default. So * we let that work too. */ if (ireq->i_val < 0 || ireq->i_val > 14) { error = EINVAL; break; } sc->wi_channel = ireq->i_val; break; case IEEE80211_IOC_POWERSAVE: switch (ireq->i_val) { case IEEE80211_POWERSAVE_OFF: sc->wi_pm_enabled = 0; break; case IEEE80211_POWERSAVE_ON: sc->wi_pm_enabled = 1; break; default: error = EINVAL; break; } break; case IEEE80211_IOC_POWERSAVESLEEP: if (ireq->i_val < 0) { error = EINVAL; break; } sc->wi_max_sleep = ireq->i_val; break; default: error = EINVAL; break; } /* Reinitialize WaveLAN. */ wi_init(sc); break; default: error = EINVAL; break; } out: WI_UNLOCK(sc); return(error); } static void wi_init(xsc) void *xsc; { struct wi_softc *sc = xsc; struct ifnet *ifp = &sc->arpcom.ac_if; struct wi_ltv_macaddr mac; int id = 0; WI_LOCK(sc); if (sc->wi_gone) { WI_UNLOCK(sc); return; } if (ifp->if_flags & IFF_RUNNING) wi_stop(sc); wi_reset(sc); /* Program max data length. */ WI_SETVAL(WI_RID_MAX_DATALEN, sc->wi_max_data_len); /* Enable/disable IBSS creation. */ WI_SETVAL(WI_RID_CREATE_IBSS, sc->wi_create_ibss); /* Set the port type. */ WI_SETVAL(WI_RID_PORTTYPE, sc->wi_ptype); /* Program the RTS/CTS threshold. */ WI_SETVAL(WI_RID_RTS_THRESH, sc->wi_rts_thresh); /* Program the TX rate */ WI_SETVAL(WI_RID_TX_RATE, sc->wi_tx_rate); /* Access point density */ WI_SETVAL(WI_RID_SYSTEM_SCALE, sc->wi_ap_density); /* Power Management Enabled */ WI_SETVAL(WI_RID_PM_ENABLED, sc->wi_pm_enabled); /* Power Managment Max Sleep */ WI_SETVAL(WI_RID_MAX_SLEEP, sc->wi_max_sleep); /* Roaming type */ WI_SETVAL(WI_RID_ROAMING_MODE, sc->wi_roaming); /* Specify the IBSS name */ WI_SETSTR(WI_RID_OWN_SSID, sc->wi_ibss_name); /* Specify the network name */ WI_SETSTR(WI_RID_DESIRED_SSID, sc->wi_net_name); /* Specify the frequency to use */ WI_SETVAL(WI_RID_OWN_CHNL, sc->wi_channel); /* Program the nodename. */ WI_SETSTR(WI_RID_NODENAME, sc->wi_node_name); /* Set our MAC address. */ mac.wi_len = 4; mac.wi_type = WI_RID_MAC_NODE; bcopy((char *)&sc->arpcom.ac_enaddr, (char *)&mac.wi_mac_addr, ETHER_ADDR_LEN); wi_write_record(sc, (struct wi_ltv_gen *)&mac); /* Configure WEP. */ if (sc->wi_has_wep) { WI_SETVAL(WI_RID_ENCRYPTION, sc->wi_use_wep); WI_SETVAL(WI_RID_TX_CRYPT_KEY, sc->wi_tx_key); sc->wi_keys.wi_len = (sizeof(struct wi_ltv_keys) / 2) + 1; sc->wi_keys.wi_type = WI_RID_DEFLT_CRYPT_KEYS; wi_write_record(sc, (struct wi_ltv_gen *)&sc->wi_keys); if (sc->sc_firmware_type != WI_LUCENT && sc->wi_use_wep) { /* * ONLY HWB3163 EVAL-CARD Firmware version * less than 0.8 variant2 * * If promiscuous mode disable, Prism2 chip * does not work with WEP . * It is under investigation for details. * (ichiro@netbsd.org) */ if (sc->sc_firmware_type == WI_INTERSIL && sc->sc_sta_firmware_ver < 802 ) { /* firm ver < 0.8 variant 2 */ WI_SETVAL(WI_RID_PROMISC, 1); } WI_SETVAL(WI_RID_AUTH_CNTL, sc->wi_authtype); } } /* Initialize promisc mode. */ if (ifp->if_flags & IFF_PROMISC) { WI_SETVAL(WI_RID_PROMISC, 1); } else { WI_SETVAL(WI_RID_PROMISC, 0); } /* Set multicast filter. */ wi_setmulti(sc); /* Enable desired port */ wi_cmd(sc, WI_CMD_ENABLE | sc->wi_portnum, 0, 0, 0); if (wi_alloc_nicmem(sc, ETHER_MAX_LEN + sizeof(struct wi_frame) + 8, &id)) device_printf(sc->dev, "tx buffer allocation failed\n"); sc->wi_tx_data_id = id; if (wi_alloc_nicmem(sc, ETHER_MAX_LEN + sizeof(struct wi_frame) + 8, &id)) device_printf(sc->dev, "mgmt. buffer allocation failed\n"); sc->wi_tx_mgmt_id = id; /* enable interrupts */ CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; sc->wi_stat_ch = timeout(wi_inquire, sc, hz * 60); WI_UNLOCK(sc); return; } static void wi_start(ifp) struct ifnet *ifp; { struct wi_softc *sc; struct mbuf *m0; struct wi_frame tx_frame; struct ether_header *eh; int id; sc = ifp->if_softc; WI_LOCK(sc); if (sc->wi_gone) { WI_UNLOCK(sc); return; } if (ifp->if_flags & IFF_OACTIVE) { WI_UNLOCK(sc); return; } IF_DEQUEUE(&ifp->if_snd, m0); if (m0 == NULL) { WI_UNLOCK(sc); return; } bzero((char *)&tx_frame, sizeof(tx_frame)); id = sc->wi_tx_data_id; eh = mtod(m0, struct ether_header *); /* * Use RFC1042 encoding for IP and ARP datagrams, * 802.3 for anything else. */ if (ntohs(eh->ether_type) > ETHER_MAX_LEN) { bcopy((char *)&eh->ether_dhost, (char *)&tx_frame.wi_addr1, ETHER_ADDR_LEN); bcopy((char *)&eh->ether_shost, (char *)&tx_frame.wi_addr2, ETHER_ADDR_LEN); bcopy((char *)&eh->ether_dhost, (char *)&tx_frame.wi_dst_addr, ETHER_ADDR_LEN); bcopy((char *)&eh->ether_shost, (char *)&tx_frame.wi_src_addr, ETHER_ADDR_LEN); tx_frame.wi_dat_len = m0->m_pkthdr.len - WI_SNAPHDR_LEN; tx_frame.wi_frame_ctl = WI_FTYPE_DATA; tx_frame.wi_dat[0] = htons(WI_SNAP_WORD0); tx_frame.wi_dat[1] = htons(WI_SNAP_WORD1); tx_frame.wi_len = htons(m0->m_pkthdr.len - WI_SNAPHDR_LEN); tx_frame.wi_type = eh->ether_type; m_copydata(m0, sizeof(struct ether_header), m0->m_pkthdr.len - sizeof(struct ether_header), (caddr_t)&sc->wi_txbuf); wi_write_data(sc, id, 0, (caddr_t)&tx_frame, sizeof(struct wi_frame)); wi_write_data(sc, id, WI_802_11_OFFSET, (caddr_t)&sc->wi_txbuf, (m0->m_pkthdr.len - sizeof(struct ether_header)) + 2); } else { tx_frame.wi_dat_len = m0->m_pkthdr.len; eh->ether_type = htons(m0->m_pkthdr.len - WI_SNAPHDR_LEN); m_copydata(m0, 0, m0->m_pkthdr.len, (caddr_t)&sc->wi_txbuf); wi_write_data(sc, id, 0, (caddr_t)&tx_frame, sizeof(struct wi_frame)); wi_write_data(sc, id, WI_802_3_OFFSET, (caddr_t)&sc->wi_txbuf, m0->m_pkthdr.len + 2); } /* * If there's a BPF listner, bounce a copy of * this frame to him. Also, don't send this to the bpf sniffer * if we're in procframe or monitor sniffing mode. */ if (!(sc->wi_procframe || sc->wi_debug.wi_monitor) && ifp->if_bpf) bpf_mtap(ifp, m0); m_freem(m0); if (wi_cmd(sc, WI_CMD_TX|WI_RECLAIM, id, 0, 0)) device_printf(sc->dev, "xmit failed\n"); ifp->if_flags |= IFF_OACTIVE; /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; WI_UNLOCK(sc); return; } static int wi_mgmt_xmit(sc, data, len) struct wi_softc *sc; caddr_t data; int len; { struct wi_frame tx_frame; int id; struct wi_80211_hdr *hdr; caddr_t dptr; if (sc->wi_gone) return(ENODEV); hdr = (struct wi_80211_hdr *)data; dptr = data + sizeof(struct wi_80211_hdr); bzero((char *)&tx_frame, sizeof(tx_frame)); id = sc->wi_tx_mgmt_id; bcopy((char *)hdr, (char *)&tx_frame.wi_frame_ctl, sizeof(struct wi_80211_hdr)); tx_frame.wi_dat_len = len - WI_SNAPHDR_LEN; tx_frame.wi_len = htons(len - WI_SNAPHDR_LEN); wi_write_data(sc, id, 0, (caddr_t)&tx_frame, sizeof(struct wi_frame)); wi_write_data(sc, id, WI_802_11_OFFSET_RAW, dptr, (len - sizeof(struct wi_80211_hdr)) + 2); if (wi_cmd(sc, WI_CMD_TX|WI_RECLAIM, id, 0, 0)) { device_printf(sc->dev, "xmit failed\n"); return(EIO); } return(0); } static void wi_stop(sc) struct wi_softc *sc; { struct ifnet *ifp; WI_LOCK(sc); if (sc->wi_gone) { WI_UNLOCK(sc); return; } ifp = &sc->arpcom.ac_if; /* * If the card is gone and the memory port isn't mapped, we will * (hopefully) get 0xffff back from the status read, which is not * a valid status value. */ if (CSR_READ_2(sc, WI_STATUS) != 0xffff) { CSR_WRITE_2(sc, WI_INT_EN, 0); wi_cmd(sc, WI_CMD_DISABLE|sc->wi_portnum, 0, 0, 0); } untimeout(wi_inquire, sc, sc->wi_stat_ch); ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE); WI_UNLOCK(sc); return; } static void wi_watchdog(ifp) struct ifnet *ifp; { struct wi_softc *sc; sc = ifp->if_softc; device_printf(sc->dev, "watchdog timeout\n"); wi_init(sc); ifp->if_oerrors++; return; } int wi_alloc(dev, rid) device_t dev; int rid; { struct wi_softc *sc = device_get_softc(dev); if (sc->wi_bus_type != WI_BUS_PCI_NATIVE) { sc->iobase_rid = rid; sc->iobase = bus_alloc_resource(dev, SYS_RES_IOPORT, &sc->iobase_rid, 0, ~0, (1 << 6), rman_make_alignment_flags(1 << 6) | RF_ACTIVE); if (!sc->iobase) { device_printf(dev, "No I/O space?!\n"); return (ENXIO); } sc->wi_io_addr = rman_get_start(sc->iobase); sc->wi_btag = rman_get_bustag(sc->iobase); sc->wi_bhandle = rman_get_bushandle(sc->iobase); } else { sc->mem_rid = rid; sc->mem = bus_alloc_resource(dev, SYS_RES_MEMORY, &sc->mem_rid, 0, ~0, 1, RF_ACTIVE); if (!sc->mem) { device_printf(dev, "No Mem space on prism2.5?\n"); return (ENXIO); } sc->wi_btag = rman_get_bustag(sc->mem); sc->wi_bhandle = rman_get_bushandle(sc->mem); } sc->irq_rid = 0; sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->irq_rid, 0, ~0, 1, RF_ACTIVE | ((sc->wi_bus_type == WI_BUS_PCCARD) ? 0 : RF_SHAREABLE)); if (!sc->irq) { wi_free(dev); device_printf(dev, "No irq?!\n"); return (ENXIO); } sc->dev = dev; sc->wi_unit = device_get_unit(dev); return (0); } void wi_free(dev) device_t dev; { struct wi_softc *sc = device_get_softc(dev); if (sc->iobase != NULL) { bus_release_resource(dev, SYS_RES_IOPORT, sc->iobase_rid, sc->iobase); sc->iobase = NULL; } if (sc->irq != NULL) { bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq); sc->irq = NULL; } if (sc->mem != NULL) { bus_release_resource(dev, SYS_RES_MEMORY, sc->mem_rid, sc->mem); sc->mem = NULL; } return; } void wi_shutdown(dev) device_t dev; { struct wi_softc *sc; sc = device_get_softc(dev); wi_stop(sc); return; } #ifdef WICACHE /* wavelan signal strength cache code. * store signal/noise/quality on per MAC src basis in * a small fixed cache. The cache wraps if > MAX slots * used. The cache may be zeroed out to start over. * Two simple filters exist to reduce computation: * 1. ip only (literally 0x800) which may be used * to ignore some packets. It defaults to ip only. * it could be used to focus on broadcast, non-IP 802.11 beacons. * 2. multicast/broadcast only. This may be used to * ignore unicast packets and only cache signal strength * for multicast/broadcast packets (beacons); e.g., Mobile-IP * beacons and not unicast traffic. * * The cache stores (MAC src(index), IP src (major clue), signal, * quality, noise) * * No apologies for storing IP src here. It's easy and saves much * trouble elsewhere. The cache is assumed to be INET dependent, * although it need not be. */ #ifdef documentation int wi_sigitems; /* number of cached entries */ struct wi_sigcache wi_sigcache[MAXWICACHE]; /* array of cache entries */ int wi_nextitem; /* index/# of entries */ #endif /* control variables for cache filtering. Basic idea is * to reduce cost (e.g., to only Mobile-IP agent beacons * which are broadcast or multicast). Still you might * want to measure signal strength with unicast ping packets * on a pt. to pt. ant. setup. */ /* set true if you want to limit cache items to broadcast/mcast * only packets (not unicast). Useful for mobile-ip beacons which * are broadcast/multicast at network layer. Default is all packets * so ping/unicast will work say with pt. to pt. antennae setup. */ static int wi_cache_mcastonly = 0; SYSCTL_INT(_machdep, OID_AUTO, wi_cache_mcastonly, CTLFLAG_RW, &wi_cache_mcastonly, 0, ""); /* set true if you want to limit cache items to IP packets only */ static int wi_cache_iponly = 1; SYSCTL_INT(_machdep, OID_AUTO, wi_cache_iponly, CTLFLAG_RW, &wi_cache_iponly, 0, ""); /* * Original comments: * ----------------- * wi_cache_store, per rx packet store signal * strength in MAC (src) indexed cache. * * follows linux driver in how signal strength is computed. * In ad hoc mode, we use the rx_quality field. * signal and noise are trimmed to fit in the range from 47..138. * rx_quality field MSB is signal strength. * rx_quality field LSB is noise. * "quality" is (signal - noise) as is log value. * note: quality CAN be negative. * * In BSS mode, we use the RID for communication quality. * TBD: BSS mode is currently untested. * * Bill's comments: * --------------- * Actually, we use the rx_quality field all the time for both "ad-hoc" * and BSS modes. Why? Because reading an RID is really, really expensive: * there's a bunch of PIO operations that have to be done to read a record * from the NIC, and reading the comms quality RID each time a packet is * received can really hurt performance. We don't have to do this anyway: * the comms quality field only reflects the values in the rx_quality field * anyway. The comms quality RID is only meaningful in infrastructure mode, * but the values it contains are updated based on the rx_quality from * frames received from the access point. * * Also, according to Lucent, the signal strength and noise level values * can be converted to dBms by subtracting 149, so I've modified the code * to do that instead of the scaling it did originally. */ static void wi_cache_store(struct wi_softc *sc, struct ether_header *eh, struct mbuf *m, unsigned short rx_quality) { struct ip *ip = 0; int i; static int cache_slot = 0; /* use this cache entry */ static int wrapindex = 0; /* next "free" cache entry */ int sig, noise; int sawip=0; /* filters: * 1. ip only * 2. configurable filter to throw out unicast packets, * keep multicast only. */ if ((ntohs(eh->ether_type) == ETHERTYPE_IP)) { sawip = 1; } /* filter for ip packets only */ if (wi_cache_iponly && !sawip) { return; } /* filter for broadcast/multicast only */ if (wi_cache_mcastonly && ((eh->ether_dhost[0] & 1) == 0)) { return; } #ifdef SIGDEBUG printf("wi%d: q value %x (MSB=0x%x, LSB=0x%x) \n", sc->wi_unit, rx_quality & 0xffff, rx_quality >> 8, rx_quality & 0xff); #endif /* find the ip header. we want to store the ip_src * address. */ if (sawip) { ip = mtod(m, struct ip *); } /* do a linear search for a matching MAC address * in the cache table * . MAC address is 6 bytes, * . var w_nextitem holds total number of entries already cached */ for(i = 0; i < sc->wi_nextitem; i++) { if (! bcmp(eh->ether_shost , sc->wi_sigcache[i].macsrc, 6 )) { /* Match!, * so we already have this entry, * update the data */ break; } } /* did we find a matching mac address? * if yes, then overwrite a previously existing cache entry */ if (i < sc->wi_nextitem ) { cache_slot = i; } /* else, have a new address entry,so * add this new entry, * if table full, then we need to replace LRU entry */ else { /* check for space in cache table * note: wi_nextitem also holds number of entries * added in the cache table */ if ( sc->wi_nextitem < MAXWICACHE ) { cache_slot = sc->wi_nextitem; sc->wi_nextitem++; sc->wi_sigitems = sc->wi_nextitem; } /* no space found, so simply wrap with wrap index * and "zap" the next entry */ else { if (wrapindex == MAXWICACHE) { wrapindex = 0; } cache_slot = wrapindex++; } } /* invariant: cache_slot now points at some slot * in cache. */ if (cache_slot < 0 || cache_slot >= MAXWICACHE) { log(LOG_ERR, "wi_cache_store, bad index: %d of " "[0..%d], gross cache error\n", cache_slot, MAXWICACHE); return; } /* store items in cache * .ip source address * .mac src * .signal, etc. */ if (sawip) { sc->wi_sigcache[cache_slot].ipsrc = ip->ip_src.s_addr; } bcopy( eh->ether_shost, sc->wi_sigcache[cache_slot].macsrc, 6); sig = (rx_quality >> 8) & 0xFF; noise = rx_quality & 0xFF; sc->wi_sigcache[cache_slot].signal = sig - 149; sc->wi_sigcache[cache_slot].noise = noise - 149; sc->wi_sigcache[cache_slot].quality = sig - noise; return; } #endif static int wi_get_cur_ssid(sc, ssid, len) struct wi_softc *sc; char *ssid; int *len; { int error = 0; struct wi_req wreq; wreq.wi_len = WI_MAX_DATALEN; switch (sc->wi_ptype) { case WI_PORTTYPE_ADHOC: wreq.wi_type = WI_RID_CURRENT_SSID; error = wi_read_record(sc, (struct wi_ltv_gen *)&wreq); if (error != 0) break; if (wreq.wi_val[0] > IEEE80211_NWID_LEN) { error = EINVAL; break; } *len = wreq.wi_val[0]; bcopy(&wreq.wi_val[1], ssid, IEEE80211_NWID_LEN); break; case WI_PORTTYPE_BSS: wreq.wi_type = WI_RID_COMMQUAL; error = wi_read_record(sc, (struct wi_ltv_gen *)&wreq); if (error != 0) break; if (wreq.wi_val[0] != 0) /* associated */ { wreq.wi_type = WI_RID_CURRENT_SSID; wreq.wi_len = WI_MAX_DATALEN; error = wi_read_record(sc, (struct wi_ltv_gen *)&wreq); if (error != 0) break; if (wreq.wi_val[0] > IEEE80211_NWID_LEN) { error = EINVAL; break; } *len = wreq.wi_val[0]; bcopy(&wreq.wi_val[1], ssid, IEEE80211_NWID_LEN); } else { *len = IEEE80211_NWID_LEN; bcopy(sc->wi_net_name, ssid, IEEE80211_NWID_LEN); } break; default: error = EINVAL; break; } return error; } static int wi_media_change(ifp) struct ifnet *ifp; { struct wi_softc *sc = ifp->if_softc; int otype = sc->wi_ptype; int orate = sc->wi_tx_rate; if ((sc->ifmedia.ifm_cur->ifm_media & IFM_IEEE80211_ADHOC) != 0) sc->wi_ptype = WI_PORTTYPE_ADHOC; else sc->wi_ptype = WI_PORTTYPE_BSS; switch (IFM_SUBTYPE(sc->ifmedia.ifm_cur->ifm_media)) { case IFM_IEEE80211_DS1: sc->wi_tx_rate = 1; break; case IFM_IEEE80211_DS2: sc->wi_tx_rate = 2; break; case IFM_IEEE80211_DS5: sc->wi_tx_rate = 5; break; case IFM_IEEE80211_DS11: sc->wi_tx_rate = 11; break; case IFM_AUTO: sc->wi_tx_rate = 3; break; } if (otype != sc->wi_ptype || orate != sc->wi_tx_rate) wi_init(sc); return(0); } static void wi_media_status(ifp, imr) struct ifnet *ifp; struct ifmediareq *imr; { struct wi_req wreq; struct wi_softc *sc = ifp->if_softc; if (sc->wi_tx_rate == 3) { imr->ifm_active = IFM_IEEE80211|IFM_AUTO; if (sc->wi_ptype == WI_PORTTYPE_ADHOC) imr->ifm_active |= IFM_IEEE80211_ADHOC; wreq.wi_type = WI_RID_CUR_TX_RATE; wreq.wi_len = WI_MAX_DATALEN; if (wi_read_record(sc, (struct wi_ltv_gen *)&wreq) == 0) { switch(wreq.wi_val[0]) { case 1: imr->ifm_active |= IFM_IEEE80211_DS1; break; case 2: imr->ifm_active |= IFM_IEEE80211_DS2; break; case 6: imr->ifm_active |= IFM_IEEE80211_DS5; break; case 11: imr->ifm_active |= IFM_IEEE80211_DS11; break; } } } else { imr->ifm_active = sc->ifmedia.ifm_cur->ifm_media; } imr->ifm_status = IFM_AVALID; if (sc->wi_ptype == WI_PORTTYPE_ADHOC) /* * XXX: It would be nice if we could give some actually * useful status like whether we joined another IBSS or * created one ourselves. */ imr->ifm_status |= IFM_ACTIVE; else { wreq.wi_type = WI_RID_COMMQUAL; wreq.wi_len = WI_MAX_DATALEN; if (wi_read_record(sc, (struct wi_ltv_gen *)&wreq) == 0 && wreq.wi_val[0] != 0) imr->ifm_status |= IFM_ACTIVE; } } static int wi_get_debug(sc, wreq) struct wi_softc *sc; struct wi_req *wreq; { int error = 0; wreq->wi_len = 1; switch (wreq->wi_type) { case WI_DEBUG_SLEEP: wreq->wi_len++; wreq->wi_val[0] = sc->wi_debug.wi_sleep; break; case WI_DEBUG_DELAYSUPP: wreq->wi_len++; wreq->wi_val[0] = sc->wi_debug.wi_delaysupp; break; case WI_DEBUG_TXSUPP: wreq->wi_len++; wreq->wi_val[0] = sc->wi_debug.wi_txsupp; break; case WI_DEBUG_MONITOR: wreq->wi_len++; wreq->wi_val[0] = sc->wi_debug.wi_monitor; break; case WI_DEBUG_LEDTEST: wreq->wi_len += 3; wreq->wi_val[0] = sc->wi_debug.wi_ledtest; wreq->wi_val[1] = sc->wi_debug.wi_ledtest_param0; wreq->wi_val[2] = sc->wi_debug.wi_ledtest_param1; break; case WI_DEBUG_CONTTX: wreq->wi_len += 2; wreq->wi_val[0] = sc->wi_debug.wi_conttx; wreq->wi_val[1] = sc->wi_debug.wi_conttx_param0; break; case WI_DEBUG_CONTRX: wreq->wi_len++; wreq->wi_val[0] = sc->wi_debug.wi_contrx; break; case WI_DEBUG_SIGSTATE: wreq->wi_len += 2; wreq->wi_val[0] = sc->wi_debug.wi_sigstate; wreq->wi_val[1] = sc->wi_debug.wi_sigstate_param0; break; case WI_DEBUG_CONFBITS: wreq->wi_len += 2; wreq->wi_val[0] = sc->wi_debug.wi_confbits; wreq->wi_val[1] = sc->wi_debug.wi_confbits_param0; break; default: error = EIO; break; } return (error); } static int wi_set_debug(sc, wreq) struct wi_softc *sc; struct wi_req *wreq; { int error = 0; u_int16_t cmd, param0 = 0, param1 = 0; switch (wreq->wi_type) { case WI_DEBUG_RESET: case WI_DEBUG_INIT: case WI_DEBUG_CALENABLE: break; case WI_DEBUG_SLEEP: sc->wi_debug.wi_sleep = 1; break; case WI_DEBUG_WAKE: sc->wi_debug.wi_sleep = 0; break; case WI_DEBUG_CHAN: param0 = wreq->wi_val[0]; break; case WI_DEBUG_DELAYSUPP: sc->wi_debug.wi_delaysupp = 1; break; case WI_DEBUG_TXSUPP: sc->wi_debug.wi_txsupp = 1; break; case WI_DEBUG_MONITOR: sc->wi_debug.wi_monitor = 1; break; case WI_DEBUG_LEDTEST: param0 = wreq->wi_val[0]; param1 = wreq->wi_val[1]; sc->wi_debug.wi_ledtest = 1; sc->wi_debug.wi_ledtest_param0 = param0; sc->wi_debug.wi_ledtest_param1 = param1; break; case WI_DEBUG_CONTTX: param0 = wreq->wi_val[0]; sc->wi_debug.wi_conttx = 1; sc->wi_debug.wi_conttx_param0 = param0; break; case WI_DEBUG_STOPTEST: sc->wi_debug.wi_delaysupp = 0; sc->wi_debug.wi_txsupp = 0; sc->wi_debug.wi_monitor = 0; sc->wi_debug.wi_ledtest = 0; sc->wi_debug.wi_ledtest_param0 = 0; sc->wi_debug.wi_ledtest_param1 = 0; sc->wi_debug.wi_conttx = 0; sc->wi_debug.wi_conttx_param0 = 0; sc->wi_debug.wi_contrx = 0; sc->wi_debug.wi_sigstate = 0; sc->wi_debug.wi_sigstate_param0 = 0; break; case WI_DEBUG_CONTRX: sc->wi_debug.wi_contrx = 1; break; case WI_DEBUG_SIGSTATE: param0 = wreq->wi_val[0]; sc->wi_debug.wi_sigstate = 1; sc->wi_debug.wi_sigstate_param0 = param0; break; case WI_DEBUG_CONFBITS: param0 = wreq->wi_val[0]; param1 = wreq->wi_val[1]; sc->wi_debug.wi_confbits = param0; sc->wi_debug.wi_confbits_param0 = param1; break; default: error = EIO; break; } if (error) return (error); cmd = WI_CMD_DEBUG | (wreq->wi_type << 8); error = wi_cmd(sc, cmd, param0, param1, 0); return (error); }