/* * Product specific probe and attach routines for: * 3940, 2940, aic7870, and aic7850 SCSI controllers * * Copyright (c) 1995 Justin T. Gibbs * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Absolutely no warranty of function or purpose is made by the author * Justin T. Gibbs. * 4. Modifications may be freely made to this file if the above conditions * are met. * * $Id: aic7870.c,v 1.23 1996/01/09 16:14:53 gibbs Exp $ */ #include #if NPCI > 0 #include #include #include #include #include #include #include #include #include #include #include #include #define PCI_BASEADR0 PCI_MAP_REG_START #define PCI_DEVICE_ID_ADAPTEC_3940U 0x82789004ul #define PCI_DEVICE_ID_ADAPTEC_2944U 0x84789004ul #define PCI_DEVICE_ID_ADAPTEC_2940U 0x81789004ul #define PCI_DEVICE_ID_ADAPTEC_3940 0x72789004ul #define PCI_DEVICE_ID_ADAPTEC_2944 0x74789004ul #define PCI_DEVICE_ID_ADAPTEC_2940 0x71789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7880 0x80789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7870 0x70789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7850 0x50789004ul #define DEVCONFIG 0x40 #define MPORTMODE 0x00000400ul /* aic7870 only */ #define RAMPSM 0x00000200ul /* aic7870 only */ #define VOLSENSE 0x00000100ul #define SCBRAMSEL 0x00000080ul #define MRDCEN 0x00000040ul #define EXTSCBTIME 0x00000020ul /* aic7870 only */ #define EXTSCBPEN 0x00000010ul /* aic7870 only */ #define BERREN 0x00000008ul #define DACEN 0x00000004ul #define STPWLEVEL 0x00000002ul #define DIFACTNEGEN 0x00000001ul /* aic7870 only */ #define CSIZE_LATTIME 0x0c #define CACHESIZE 0x0000003ful /* only 5 bits */ #define LATTIME 0x0000ff00ul /* * Define the format of the aic78X0 SEEPROM registers (16 bits). * */ struct seeprom_config { /* * SCSI ID Configuration Flags */ #define CFXFER 0x0007 /* synchronous transfer rate */ #define CFSYNCH 0x0008 /* enable synchronous transfer */ #define CFDISC 0x0010 /* enable disconnection */ #define CFWIDEB 0x0020 /* wide bus device */ /* UNUSED 0x00C0 */ #define CFSTART 0x0100 /* send start unit SCSI command */ #define CFINCBIOS 0x0200 /* include in BIOS scan */ #define CFRNFOUND 0x0400 /* report even if not found */ /* UNUSED 0xf800 */ unsigned short device_flags[16]; /* words 0-15 */ /* * BIOS Control Bits */ #define CFSUPREM 0x0001 /* support all removeable drives */ #define CFSUPREMB 0x0002 /* support removeable drives for boot only */ #define CFBIOSEN 0x0004 /* BIOS enabled */ /* UNUSED 0x0008 */ #define CFSM2DRV 0x0010 /* support more than two drives */ /* UNUSED 0x0060 */ #define CFEXTEND 0x0080 /* extended translation enabled */ /* UNUSED 0xff00 */ unsigned short bios_control; /* word 16 */ /* * Host Adapter Control Bits */ /* UNUSED 0x0001 */ #define CFULTRAEN 0x0002 /* Ultra SCSI speed enable (Ultra cards) */ #define CFSTERM 0x0004 /* SCSI low byte termination (non-wide cards) */ #define CFWSTERM 0x0008 /* SCSI high byte termination (wide card) */ #define CFSPARITY 0x0010 /* SCSI parity */ /* UNUSED 0x0020 */ #define CFRESETB 0x0040 /* reset SCSI bus at IC initialization */ /* UNUSED 0xff80 */ unsigned short adapter_control; /* word 17 */ /* * Bus Release, Host Adapter ID */ #define CFSCSIID 0x000f /* host adapter SCSI ID */ /* UNUSED 0x00f0 */ #define CFBRTIME 0xff00 /* bus release time */ unsigned short brtime_id; /* word 18 */ /* * Maximum targets */ #define CFMAXTARG 0x00ff /* maximum targets */ /* UNUSED 0xff00 */ unsigned short max_targets; /* word 19 */ unsigned short res_1[11]; /* words 20-30 */ unsigned short checksum; /* word 31 */ }; static char* aic7870_probe __P((pcici_t tag, pcidi_t type)); static void aic7870_attach __P((pcici_t config_id, int unit)); static int load_seeprom __P((struct ahc_data *ahc)); static int acquire_seeprom __P((u_long offset, u_short CS, u_short CK, u_short DO, u_short DI, u_short RDY, u_short MS)); static void release_seeprom __P((u_long offset, u_short CS, u_short CK, u_short DO, u_short DI, u_short RDY, u_short MS)); static u_char aic3940_count; static struct pci_device ahc_pci_driver = { "ahc", aic7870_probe, aic7870_attach, &ahc_unit, NULL }; DATA_SET (pcidevice_set, ahc_pci_driver); static char* aic7870_probe (pcici_t tag, pcidi_t type) { switch(type) { case PCI_DEVICE_ID_ADAPTEC_3940U: return ("Adaptec 3940 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_3940: return ("Adaptec 3940 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2944U: return ("Adaptec 2944 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940U: return ("Adaptec 2940 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2944: return ("Adaptec 2944 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940: return ("Adaptec 2940 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7880: return ("Adaptec aic7880 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7870: return ("Adaptec aic7870 SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7850: return ("Adaptec aic7850 SCSI host adapter"); break; default: break; } return (0); } static void aic7870_attach(config_id, unit) pcici_t config_id; int unit; { u_long io_port; u_long id; unsigned opri = 0; ahc_type ahc_t = AHC_NONE; ahc_flag ahc_f = AHC_FNONE; struct ahc_data *ahc; if(!(io_port = pci_conf_read(config_id, PCI_BASEADR0))) return; /* * The first bit of PCI_BASEADR0 is always * set hence we mask it off. */ io_port &= 0xfffffffe; switch ((id = pci_conf_read(config_id, PCI_ID_REG))) { case PCI_DEVICE_ID_ADAPTEC_3940U: case PCI_DEVICE_ID_ADAPTEC_3940: if (id == PCI_DEVICE_ID_ADAPTEC_3940U) ahc_t = AHC_394U; else ahc_t = AHC_394; aic3940_count++; if(!(aic3940_count & 0x01)) /* Even count implies second channel */ ahc_f |= AHC_CHNLB; /* Even though it doesn't turn on RAMPS, it has them */ ahc_f |= AHC_EXTSCB; break; case PCI_DEVICE_ID_ADAPTEC_2944U: case PCI_DEVICE_ID_ADAPTEC_2940U: ahc_t = AHC_294U; break; case PCI_DEVICE_ID_ADAPTEC_2944: case PCI_DEVICE_ID_ADAPTEC_2940: ahc_t = AHC_294; break; case PCI_DEVICE_ID_ADAPTEC_AIC7880: ahc_t = AHC_AIC7880; break; case PCI_DEVICE_ID_ADAPTEC_AIC7870: ahc_t = AHC_AIC7870; break; case PCI_DEVICE_ID_ADAPTEC_AIC7850: ahc_t = AHC_AIC7850; break; default: break; } ahc_reset(io_port); if(ahc_t & AHC_AIC7870){ u_long devconfig = pci_conf_read(config_id, DEVCONFIG); if(devconfig & (RAMPSM)) { /* * External SRAM present. Have the probe walk * the SCBs to see how much SRAM we have and set * the number of SCBs accordingly. We have to * turn off SCBRAMSEL to access the external * SCB SRAM. * * It seems that early versions of the aic7870 * didn't use these bits, hence the hack for the * 3940 above. I would guess that recent 3940s * using later aic7870 or aic7880 chips do * actually set RAMPSM. * * The documentation isn't clear, but it sounds * like the value written to devconfig must not * have RAMPSM set. The second sixteen bits of * the register are R/O anyway, so it shouldn't * affect RAMPSM either way. */ devconfig &= ~(RAMPSM|SCBRAMSEL); pci_conf_write(config_id, DEVCONFIG, devconfig); ahc_f |= AHC_EXTSCB; } } /* * Ensure that we are using good values for the PCI burst size * and latency timer. */ { u_long csize_lattime = pci_conf_read(config_id, CSIZE_LATTIME); if((csize_lattime & CACHESIZE) == 0) { /* default to 8DWDs. What's the PCI define for this? */ csize_lattime |= 8; } if((csize_lattime & LATTIME) == 0) { /* Default to 64 PCLKS (is this a good value?) */ /* This may also be availble in the SEEPROM?? */ csize_lattime |= (64 << 8); } if(bootverbose) printf("ahc%d: BurstLen = %dDWDs, " "Latency Timer = %dPCLKS\n", unit, csize_lattime & CACHESIZE, (csize_lattime >> 8) & 0xff); pci_conf_write(config_id, CSIZE_LATTIME, csize_lattime); } if(!(ahc = ahc_alloc(unit, io_port, ahc_t, ahc_f))) return; /* XXX PCI code should take return status */ if(!(pci_map_int(config_id, ahc_intr, (void *)ahc, &bio_imask))) { ahc_free(ahc); return; } /* * Protect ourself from spurrious interrupts during * intialization. */ opri = splbio(); /* * Do aic7870/aic7880/aic7850 specific initialization */ { u_char sblkctl; char *id_string; u_long iobase = ahc->baseport; switch(ahc->type) { case AHC_394U: case AHC_294U: case AHC_AIC7880: { id_string = "aic7880 "; load_seeprom(ahc); ahc->maxscbs = 16; break; } case AHC_394: case AHC_294: case AHC_AIC7870: { id_string = "aic7870 "; load_seeprom(ahc); ahc->maxscbs = 16; break; } case AHC_AIC7850: { id_string = "aic7850 "; ahc->maxscbs = 3; /* Assume there is no BIOS for these cards? */ ahc->flags |= AHC_USEDEFAULTS; break; } default: { printf("ahc: Unknown controller type. Ignoring.\n"); return; break; } } printf("ahc%d: %s", unit, id_string); /* * Take the LED out of diagnostic mode */ sblkctl = inb(SBLKCTL + iobase); outb(SBLKCTL + iobase, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); /* * I don't know where this is set in the SEEPROM or by the * BIOS, so we default to 100%. */ outb(DSPCISTATUS + iobase, DFTHRSH_100); if(ahc->flags & AHC_USEDEFAULTS) { /* * PCI Adapter default setup * Should only be used if the adapter does not have * an SEEPROM and we don't think a BIOS was installed. */ /* Set the host ID */ outb(SCSICONF + iobase, 7); /* In case we are a wide card */ outb(SCSICONF + 1 + iobase, 7); } if(ahc->flags & AHC_EXTSCB) { /* * This adapter has external SCB memory. * Walk the SCBs to determine how many there are. */ int i; for(i = 0; i < AHC_SCB_MAX; i++) { outb(SCBPTR + iobase, i); outb(SCBARRAY + iobase, 0xaa); if(inb(SCBARRAY + iobase) == 0xaa){ outb(SCBARRAY + iobase, 0x55); if(inb(SCBARRAY + iobase) == 0x55) { continue; } } break; } ahc->maxscbs = i; } } if(ahc_init(ahc)){ ahc_free(ahc); splx(opri); return; /* XXX PCI code should take return status */ } splx(opri); ahc_attach(ahc); return; } /* * Read the SEEPROM. Return 0 on failure */ int load_seeprom(ahc) struct ahc_data *ahc; { struct seeprom_config sc; u_short *scarray = (u_short *)≻ u_short checksum = 0; u_long iobase = ahc->baseport; u_char host_id; int have_seeprom, retval; if(bootverbose) printf("ahc%d: Reading SEEPROM...", ahc->unit); have_seeprom = acquire_seeprom(iobase + SEECTL, SEECS, SEECK, SEEDO, SEEDI, SEERDY, SEEMS); if (have_seeprom) { have_seeprom = read_seeprom(iobase + SEECTL, (u_short *)&sc, ahc->flags & AHC_CHNLB, sizeof(sc)/2, SEECS, SEECK, SEEDO, SEEDI, SEERDY, SEEMS); release_seeprom(iobase + SEECTL, SEECS, SEECK, SEEDO, SEEDI, SEERDY, SEEMS); if (have_seeprom) { /* Check checksum */ int i; for (i = 0;i < (sizeof(sc)/2 - 1);i = i + 1) checksum = checksum + scarray[i]; if (checksum != sc.checksum) { printf ("checksum error"); have_seeprom = 0; } else { if(bootverbose) printf("done.\n"); host_id = (sc.brtime_id & CFSCSIID); } } } if (!have_seeprom) { printf("\nahc%d: SEEPROM read failed, " "using leftover BIOS values\n", ahc->unit); retval = 0; host_id = 0x7; /* Assume a default */ /* * If we happen to be an ULTRA card, * default to non-ultra mode. */ ahc->type &= ~AHC_ULTRA; } else { /* * Put the data we've collected down into SRAM * where ahc_init will find it. */ int i; int max_targ = sc.max_targets & CFMAXTARG; for(i = 0; i <= max_targ; i++){ u_char target_settings; target_settings = (sc.device_flags[i] & CFXFER) << 4; if (sc.device_flags[i] & CFSYNCH) target_settings |= SOFS; if (sc.device_flags[i] & CFWIDEB) target_settings |= WIDEXFER; if (sc.device_flags[i] & CFDISC) ahc->discenable |= (0x01 << i); outb(TARG_SCRATCH+i+iobase, target_settings); } outb(DISC_DSB + iobase, ~(ahc->discenable & 0xff)); outb(DISC_DSB + iobase + 1, ~((ahc->discenable >> 8) & 0xff)); host_id = sc.brtime_id & CFSCSIID; if(ahc->type & AHC_ULTRA) { /* Should we enable Ultra mode? */ if(!(sc.adapter_control & CFULTRAEN)) /* Treat us as a non-ultra card */ ahc->type &= ~AHC_ULTRA; } retval = 1; } /* Set the host ID */ outb(SCSICONF + iobase, host_id); /* In case we are a wide card */ outb(SCSICONF + 1 + iobase, host_id); return(retval); } static int acquire_seeprom(offset, CS, CK, DO, DI, RDY, MS) u_long offset; u_short CS; /* chip select */ u_short CK; /* clock */ u_short DO; /* data out */ u_short DI; /* data in */ u_short RDY; /* ready */ u_short MS; /* mode select */ { int wait; /* * Request access of the memory port. When access is * granted, SEERDY will go high. We use a 1 second * timeout which should be near 1 second more than * is needed. Reason: after the chip reset, there * should be no contention. */ outb(offset, MS); wait = 1000; /* 1 second timeout in msec */ while (--wait && ((inb(offset) & RDY) == 0)) { DELAY (1000); /* delay 1 msec */ } if ((inb(offset) & RDY) == 0) { outb (offset, 0); return (0); } return(1); } static void release_seeprom(offset, CS, CK, DO, DI, RDY, MS) u_long offset; u_short CS; /* chip select */ u_short CK; /* clock */ u_short DO; /* data out */ u_short DI; /* data in */ u_short RDY; /* ready */ u_short MS; /* mode select */ { /* Release access to the memory port and the serial EEPROM. */ outb(offset, 0); } #endif /* NPCI > 0 */