#
# PCCARD -- Generic machine with WD/AHx/NCR/BTx family disks and PCMCIA
#           hardware support
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id$

machine		i386
cpu		I386_CPU
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		GENERIC
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		MFS			#Memory Filesystem
options		MFS_ROOT		#MFS usable as root device, "MFS" req'ed
options		NFS			#Network Filesystem
options		NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options		MSDOSFS			#MSDOS Filesystem
options		CD9660			#ISO 9660 Filesystem
options		CD9660_ROOT		#CD-ROM usable as root. "CD9660" req'ed
options		PROCFS			#Process filesystem
options		COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options		UCONSOLE		#Allow users to grab the console
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

# To make an SMP kernel, the next two are needed
#options	SMP			# Symmetric MultiProcessor Kernel
#options	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options	NCPU=2			# number of CPUs
#options	NBUS=4			# number of busses
#options	NAPIC=1			# number of IO APICs
#options	NINTR=24		# number of INTs

controller	isa0
controller	pnp0			# PnP support for ISA
controller	eisa0
controller	pci0

controller	fdc0	at isa? port IO_FD1 irq 6 drq 2
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1

controller	wdc0	at isa? port IO_WD1 irq 14
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port IO_WD2 irq 15
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

# ATAPI devices on wdc?
device		wcd0		#IDE CD-ROM
device		wfd0		#IDE Floppy (e.g. LS-120)
device		wst0		#IDE Tape (e.g. Travan)

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller	ncr0
controller	ahb0
controller	ahc0
controller	isp0

# This controller offers a number of configuration options, too many to
# document here  - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller      dpt0

controller	adv0	at isa? port ? irq ?
controller	adw0
controller	bt0	at isa? port ? irq ?
controller	aha0	at isa? port ? irq ?

controller	scbus0

device		da0	#Only need one of these, the code dynamically grows
device		sa0
device		pass0
device		cd0

device		wt0	at isa? port 0x300 irq 5 drq 1
device		mcd0	at isa? port 0x300 irq 10

controller	matcd0	at isa? port 0x230

device		scd0	at isa? port 0x230

# atkbdc0 controls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

device		npx0	at nexus? port IO_NPX irq 13

#
# Laptop support (see LINT for more options)
#
device		apm0    at nexus? disable flags 0x31 # Advanced Power Management

# PCCARD (PCMCIA) support
controller	card0
device		pcic0	at card?
device		pcic1	at card?

device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? port? flags 0x40 irq 7
controller	ppbus0
device		lpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?
#controller	vpo0	at ppbus?

#
# The following Ethernet NICs are all PCI devices.
#
device al0		# ADMtek AL981 (``Comet'')
device ax0		# ASIX AX88140A
device de0		# DEC/Intel DC21x4x (``Tulip'')
device fxp0		# Intel EtherExpress PRO/100B (82557, 82558)
device mx0		# Macronix 98713/98715/98725 (``PMAC'')
device pn0		# Lite-On 82c168/82c169 (``PNIC'')
device rl0		# RealTek 8129/8139
device tl0		# Texas Instruments ThunderLAN
device tx0		# SMC 9432TX (83c170 ``EPIC'')
device vr0		# VIA Rhine, Rhine II
device vx0		# 3Com 3c590, 3c595 (``Vortex'')
device wb0		# Winbond W89C840F
device xl0		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
device ep0 at isa? port 0x300 irq 10
device ex0 at isa? port? irq?
device fe0 at isa? port 0x300 irq ?
device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
#device xe0 at isa? port? irq ?
#device ze0 at isa? port 0x300 irq 10 iomem 0xd8000
#device zp0 at isa? port 0x300 irq 10 iomem 0xd8000
device cs0 at isa? port 0x300 irq ?

pseudo-device	loop
pseudo-device	ether
pseudo-device	sl	1
pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory and message queues.
#
options         SYSVSHM
options         SYSVMSG
options         SYSVSEM

#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
#  aware of the legal and administrative consequences of enabling this
#  option.  The number of devices determines the maximum number of
#  simultaneous BPF clients programs runnable.
#pseudo-device	bpfilter 4	#Berkeley packet filter

# USB support
#controller	uhci0
#controller	ohci0
#controller	usb0
#
#device		ugen0
#device		uhid0
#device		ukbd0
#device		ulpt0
#controller	umass0
#device		ums0