/* * Copyright (c) 1993, 1994, 1995, 1996, 1997 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that: (1) source code distributions * retain the above copyright notice and this paragraph in its entirety, (2) * distributions including binary code include the above copyright notice and * this paragraph in its entirety in the documentation or other materials * provided with the distribution, and (3) all advertising materials mentioning * features or use of this software display the following acknowledgement: * ``This product includes software developed by the University of California, * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of * the University nor the names of its contributors may be used to endorse * or promote products derived from this software without specific prior * written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * * savefile.c - supports offline use of tcpdump * Extraction/creation by Jeffrey Mogul, DECWRL * Modified by Steve McCanne, LBL. * * Used to save the received packet headers, after filtering, to * a file, and then read them later. * The first record in the file contains saved values for the machine * dependent values so we can print the dump file on any architecture. */ #ifndef lint static const char rcsid[] _U_ = "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.126.2.30 2007/08/14 20:57:49 guy Exp $ (LBL)"; #endif #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include "pcap-int.h" #ifdef HAVE_OS_PROTO_H #include "os-proto.h" #endif /* * Standard libpcap format. */ #define TCPDUMP_MAGIC 0xa1b2c3d4 /* * Alexey Kuznetzov's modified libpcap format. */ #define KUZNETZOV_TCPDUMP_MAGIC 0xa1b2cd34 /* * Reserved for Francisco Mesquita * for another modified format. */ #define FMESQUITA_TCPDUMP_MAGIC 0xa1b234cd /* * Navtel Communcations' format, with nanosecond timestamps, * as per a request from Dumas Hwang . */ #define NAVTEL_TCPDUMP_MAGIC 0xa12b3c4d /* * Normal libpcap format, except for seconds/nanoseconds timestamps, * as per a request by Ulf Lamping */ #define NSEC_TCPDUMP_MAGIC 0xa1b23c4d /* * We use the "receiver-makes-right" approach to byte order, * because time is at a premium when we are writing the file. * In other words, the pcap_file_header and pcap_pkthdr, * records are written in host byte order. * Note that the bytes of packet data are written out in the order in * which they were received, so multi-byte fields in packets are not * written in host byte order, they're written in whatever order the * sending machine put them in. * * ntoh[ls] aren't sufficient because we might need to swap on a big-endian * machine (if the file was written in little-end order). */ #define SWAPLONG(y) \ ((((y)&0xff)<<24) | (((y)&0xff00)<<8) | (((y)&0xff0000)>>8) | (((y)>>24)&0xff)) #define SWAPSHORT(y) \ ( (((y)&0xff)<<8) | ((u_short)((y)&0xff00)>>8) ) #define SFERR_TRUNC 1 #define SFERR_BADVERSION 2 #define SFERR_BADF 3 #define SFERR_EOF 4 /* not really an error, just a status */ /* * Setting O_BINARY on DOS/Windows is a bit tricky */ #if defined(WIN32) #define SET_BINMODE(f) _setmode(_fileno(f), _O_BINARY) #elif defined(MSDOS) #if defined(__HIGHC__) #define SET_BINMODE(f) setmode(f, O_BINARY) #else #define SET_BINMODE(f) setmode(fileno(f), O_BINARY) #endif #endif /* * We don't write DLT_* values to the capture file header, because * they're not the same on all platforms. * * Unfortunately, the various flavors of BSD have not always used the same * numerical values for the same data types, and various patches to * libpcap for non-BSD OSes have added their own DLT_* codes for link * layer encapsulation types seen on those OSes, and those codes have had, * in some cases, values that were also used, on other platforms, for other * link layer encapsulation types. * * This means that capture files of a type whose numerical DLT_* code * means different things on different BSDs, or with different versions * of libpcap, can't always be read on systems other than those like * the one running on the machine on which the capture was made. * * Instead, we define here a set of LINKTYPE_* codes, and map DLT_* codes * to LINKTYPE_* codes when writing a savefile header, and map LINKTYPE_* * codes to DLT_* codes when reading a savefile header. * * For those DLT_* codes that have, as far as we know, the same values on * all platforms (DLT_NULL through DLT_FDDI), we define LINKTYPE_xxx as * DLT_xxx; that way, captures of those types can still be read by * versions of libpcap that map LINKTYPE_* values to DLT_* values, and * captures of those types written by versions of libpcap that map DLT_ * values to LINKTYPE_ values can still be read by older versions * of libpcap. * * The other LINKTYPE_* codes are given values starting at 100, in the * hopes that no DLT_* code will be given one of those values. * * In order to ensure that a given LINKTYPE_* code's value will refer to * the same encapsulation type on all platforms, you should not allocate * a new LINKTYPE_* value without consulting "tcpdump-workers@tcpdump.org". * The tcpdump developers will allocate a value for you, and will not * subsequently allocate it to anybody else; that value will be added to * the "pcap.h" in the tcpdump.org CVS repository, so that a future * libpcap release will include it. * * You should, if possible, also contribute patches to libpcap and tcpdump * to handle the new encapsulation type, so that they can also be checked * into the tcpdump.org CVS repository and so that they will appear in * future libpcap and tcpdump releases. * * Do *NOT* assume that any values after the largest value in this file * are available; you might not have the most up-to-date version of this * file, and new values after that one might have been assigned. Also, * do *NOT* use any values below 100 - those might already have been * taken by one (or more!) organizations. */ #define LINKTYPE_NULL DLT_NULL #define LINKTYPE_ETHERNET DLT_EN10MB /* also for 100Mb and up */ #define LINKTYPE_EXP_ETHERNET DLT_EN3MB /* 3Mb experimental Ethernet */ #define LINKTYPE_AX25 DLT_AX25 #define LINKTYPE_PRONET DLT_PRONET #define LINKTYPE_CHAOS DLT_CHAOS #define LINKTYPE_TOKEN_RING DLT_IEEE802 /* DLT_IEEE802 is used for Token Ring */ #define LINKTYPE_ARCNET DLT_ARCNET /* BSD-style headers */ #define LINKTYPE_SLIP DLT_SLIP #define LINKTYPE_PPP DLT_PPP #define LINKTYPE_FDDI DLT_FDDI /* * LINKTYPE_PPP is for use when there might, or might not, be an RFC 1662 * PPP in HDLC-like framing header (with 0xff 0x03 before the PPP protocol * field) at the beginning of the packet. * * This is for use when there is always such a header; the address field * might be 0xff, for regular PPP, or it might be an address field for Cisco * point-to-point with HDLC framing as per section 4.3.1 of RFC 1547 ("Cisco * HDLC"). This is, for example, what you get with NetBSD's DLT_PPP_SERIAL. * * We give it the same value as NetBSD's DLT_PPP_SERIAL, in the hopes that * nobody else will choose a DLT_ value of 50, and so that DLT_PPP_SERIAL * captures will be written out with a link type that NetBSD's tcpdump * can read. */ #define LINKTYPE_PPP_HDLC 50 /* PPP in HDLC-like framing */ #define LINKTYPE_PPP_ETHER 51 /* NetBSD PPP-over-Ethernet */ #define LINKTYPE_SYMANTEC_FIREWALL 99 /* Symantec Enterprise Firewall */ #define LINKTYPE_ATM_RFC1483 100 /* LLC/SNAP-encapsulated ATM */ #define LINKTYPE_RAW 101 /* raw IP */ #define LINKTYPE_SLIP_BSDOS 102 /* BSD/OS SLIP BPF header */ #define LINKTYPE_PPP_BSDOS 103 /* BSD/OS PPP BPF header */ #define LINKTYPE_C_HDLC 104 /* Cisco HDLC */ #define LINKTYPE_IEEE802_11 105 /* IEEE 802.11 (wireless) */ #define LINKTYPE_ATM_CLIP 106 /* Linux Classical IP over ATM */ #define LINKTYPE_FRELAY 107 /* Frame Relay */ #define LINKTYPE_LOOP 108 /* OpenBSD loopback */ #define LINKTYPE_ENC 109 /* OpenBSD IPSEC enc */ /* * These three types are reserved for future use. */ #define LINKTYPE_LANE8023 110 /* ATM LANE + 802.3 */ #define LINKTYPE_HIPPI 111 /* NetBSD HIPPI */ #define LINKTYPE_HDLC 112 /* NetBSD HDLC framing */ #define LINKTYPE_LINUX_SLL 113 /* Linux cooked socket capture */ #define LINKTYPE_LTALK 114 /* Apple LocalTalk hardware */ #define LINKTYPE_ECONET 115 /* Acorn Econet */ /* * Reserved for use with OpenBSD ipfilter. */ #define LINKTYPE_IPFILTER 116 #define LINKTYPE_PFLOG 117 /* OpenBSD DLT_PFLOG */ #define LINKTYPE_CISCO_IOS 118 /* For Cisco-internal use */ #define LINKTYPE_PRISM_HEADER 119 /* 802.11+Prism II monitor mode */ #define LINKTYPE_AIRONET_HEADER 120 /* FreeBSD Aironet driver stuff */ /* * Reserved for Siemens HiPath HDLC. */ #define LINKTYPE_HHDLC 121 #define LINKTYPE_IP_OVER_FC 122 /* RFC 2625 IP-over-Fibre Channel */ #define LINKTYPE_SUNATM 123 /* Solaris+SunATM */ /* * Reserved as per request from Kent Dahlgren * for private use. */ #define LINKTYPE_RIO 124 /* RapidIO */ #define LINKTYPE_PCI_EXP 125 /* PCI Express */ #define LINKTYPE_AURORA 126 /* Xilinx Aurora link layer */ #define LINKTYPE_IEEE802_11_RADIO 127 /* 802.11 plus BSD radio header */ /* * Reserved for the TZSP encapsulation, as per request from * Chris Waters * TZSP is a generic encapsulation for any other link type, * which includes a means to include meta-information * with the packet, e.g. signal strength and channel * for 802.11 packets. */ #define LINKTYPE_TZSP 128 /* Tazmen Sniffer Protocol */ #define LINKTYPE_ARCNET_LINUX 129 /* Linux-style headers */ /* * Juniper-private data link types, as per request from * Hannes Gredler . The corresponding * DLT_s are used for passing on chassis-internal * metainformation such as QOS profiles, etc.. */ #define LINKTYPE_JUNIPER_MLPPP 130 #define LINKTYPE_JUNIPER_MLFR 131 #define LINKTYPE_JUNIPER_ES 132 #define LINKTYPE_JUNIPER_GGSN 133 #define LINKTYPE_JUNIPER_MFR 134 #define LINKTYPE_JUNIPER_ATM2 135 #define LINKTYPE_JUNIPER_SERVICES 136 #define LINKTYPE_JUNIPER_ATM1 137 #define LINKTYPE_APPLE_IP_OVER_IEEE1394 138 /* Apple IP-over-IEEE 1394 cooked header */ #define LINKTYPE_MTP2_WITH_PHDR 139 #define LINKTYPE_MTP2 140 #define LINKTYPE_MTP3 141 #define LINKTYPE_SCCP 142 #define LINKTYPE_DOCSIS 143 /* DOCSIS MAC frames */ #define LINKTYPE_LINUX_IRDA 144 /* Linux-IrDA */ /* * Reserved for IBM SP switch and IBM Next Federation switch. */ #define LINKTYPE_IBM_SP 145 #define LINKTYPE_IBM_SN 146 /* * Reserved for private use. If you have some link-layer header type * that you want to use within your organization, with the capture files * using that link-layer header type not ever be sent outside your * organization, you can use these values. * * No libpcap release will use these for any purpose, nor will any * tcpdump release use them, either. * * Do *NOT* use these in capture files that you expect anybody not using * your private versions of capture-file-reading tools to read; in * particular, do *NOT* use them in products, otherwise you may find that * people won't be able to use tcpdump, or snort, or Ethereal, or... to * read capture files from your firewall/intrusion detection/traffic * monitoring/etc. appliance, or whatever product uses that LINKTYPE_ value, * and you may also find that the developers of those applications will * not accept patches to let them read those files. * * Also, do not use them if somebody might send you a capture using them * for *their* private type and tools using them for *your* private type * would have to read them. * * Instead, in those cases, ask "tcpdump-workers@tcpdump.org" for a new DLT_ * and LINKTYPE_ value, as per the comment in pcap-bpf.h, and use the type * you're given. */ #define LINKTYPE_USER0 147 #define LINKTYPE_USER1 148 #define LINKTYPE_USER2 149 #define LINKTYPE_USER3 150 #define LINKTYPE_USER4 151 #define LINKTYPE_USER5 152 #define LINKTYPE_USER6 153 #define LINKTYPE_USER7 154 #define LINKTYPE_USER8 155 #define LINKTYPE_USER9 156 #define LINKTYPE_USER10 157 #define LINKTYPE_USER11 158 #define LINKTYPE_USER12 159 #define LINKTYPE_USER13 160 #define LINKTYPE_USER14 161 #define LINKTYPE_USER15 162 /* * For future use with 802.11 captures - defined by AbsoluteValue * Systems to store a number of bits of link-layer information * including radio information: * * http://www.shaftnet.org/~pizza/software/capturefrm.txt * * but could and arguably should also be used by non-AVS Linux * 802.11 drivers; that may happen in the future. */ #define LINKTYPE_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */ /* * Juniper-private data link type, as per request from * Hannes Gredler . The corresponding * DLT_s are used for passing on chassis-internal * metainformation such as QOS profiles, etc.. */ #define LINKTYPE_JUNIPER_MONITOR 164 /* * Reserved for BACnet MS/TP. */ #define LINKTYPE_BACNET_MS_TP 165 /* * Another PPP variant as per request from Karsten Keil . * * This is used in some OSes to allow a kernel socket filter to distinguish * between incoming and outgoing packets, on a socket intended to * supply pppd with outgoing packets so it can do dial-on-demand and * hangup-on-lack-of-demand; incoming packets are filtered out so they * don't cause pppd to hold the connection up (you don't want random * input packets such as port scans, packets from old lost connections, * etc. to force the connection to stay up). * * The first byte of the PPP header (0xff03) is modified to accomodate * the direction - 0x00 = IN, 0x01 = OUT. */ #define LINKTYPE_PPP_PPPD 166 /* * Juniper-private data link type, as per request from * Hannes Gredler . The DLT_s are used * for passing on chassis-internal metainformation such as * QOS profiles, cookies, etc.. */ #define LINKTYPE_JUNIPER_PPPOE 167 #define LINKTYPE_JUNIPER_PPPOE_ATM 168 #define LINKTYPE_GPRS_LLC 169 /* GPRS LLC */ #define LINKTYPE_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */ #define LINKTYPE_GPF_F 171 /* GPF-T (ITU-T G.7041/Y.1303) */ /* * Requested by Oolan Zimmer for use in Gcom's T1/E1 line * monitoring equipment. */ #define LINKTYPE_GCOM_T1E1 172 #define LINKTYPE_GCOM_SERIAL 173 /* * Juniper-private data link type, as per request from * Hannes Gredler . The DLT_ is used * for internal communication to Physical Interface Cards (PIC) */ #define LINKTYPE_JUNIPER_PIC_PEER 174 /* * Link types requested by Gregor Maier of Endace * Measurement Systems. They add an ERF header (see * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of * the link-layer header. */ #define LINKTYPE_ERF_ETH 175 /* Ethernet */ #define LINKTYPE_ERF_POS 176 /* Packet-over-SONET */ /* * Requested by Daniele Orlandi for raw LAPD * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header * includes additional information before the LAPD header, so it's * not necessarily a generic LAPD header. */ #define LINKTYPE_LINUX_LAPD 177 /* * Juniper-private data link type, as per request from * Hannes Gredler . * The Link Types are used for prepending meta-information * like interface index, interface name * before standard Ethernet, PPP, Frelay & C-HDLC Frames */ #define LINKTYPE_JUNIPER_ETHER 178 #define LINKTYPE_JUNIPER_PPP 179 #define LINKTYPE_JUNIPER_FRELAY 180 #define LINKTYPE_JUNIPER_CHDLC 181 /* * Multi Link Frame Relay (FRF.16) */ #define LINKTYPE_MFR 182 /* * Juniper-private data link type, as per request from * Hannes Gredler . * The DLT_ is used for internal communication with a * voice Adapter Card (PIC) */ #define LINKTYPE_JUNIPER_VP 183 /* * Arinc 429 frames. * DLT_ requested by Gianluca Varenni . * Every frame contains a 32bit A429 label. * More documentation on Arinc 429 can be found at * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf */ #define LINKTYPE_A429 184 /* * Arinc 653 Interpartition Communication messages. * DLT_ requested by Gianluca Varenni . * Please refer to the A653-1 standard for more information. */ #define LINKTYPE_A653_ICM 185 /* * USB packets, beginning with a USB setup header; requested by * Paolo Abeni . */ #define LINKTYPE_USB 186 /* * Bluetooth HCI UART transport layer (part H:4); requested by * Paolo Abeni. */ #define LINKTYPE_BLUETOOTH_HCI_H4 187 /* * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz * . */ #define LINKTYPE_IEEE802_16_MAC_CPS 188 /* * USB packets, beginning with a Linux USB header; requested by * Paolo Abeni . */ #define LINKTYPE_USB_LINUX 189 /* * Controller Area Network (CAN) v. 2.0B packets. * DLT_ requested by Gianluca Varenni . * Used to dump CAN packets coming from a CAN Vector board. * More documentation on the CAN v2.0B frames can be found at * http://www.can-cia.org/downloads/?269 */ #define LINKTYPE_CAN20B 190 /* * IEEE 802.15.4, with address fields padded, as is done by Linux * drivers; requested by Juergen Schimmer. */ #define LINKTYPE_IEEE802_15_4_LINUX 191 /* * Per Packet Information encapsulated packets. * LINKTYPE_ requested by Gianluca Varenni . */ #define LINKTYPE_PPI 192 /* * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header; * requested by Charles Clancy. */ #define LINKTYPE_IEEE802_16_MAC_CPS_RADIO 193 /* * Juniper-private data link type, as per request from * Hannes Gredler . * The DLT_ is used for internal communication with a * integrated service module (ISM). */ #define LINKTYPE_JUNIPER_ISM 194 /* * IEEE 802.15.4, exactly as it appears in the spec (no padding, no * nothing); requested by Mikko Saarnivala . */ #define LINKTYPE_IEEE802_15_4 195 /* * Various link-layer types, with a pseudo-header, for SITA * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com). */ #define LINKTYPE_SITA 196 /* * Various link-layer types, with a pseudo-header, for Endace DAG cards; * encapsulates Endace ERF records. Requested by Stephen Donnelly * . */ #define LINKTYPE_ERF 197 /* * Special header prepended to Ethernet packets when capturing from a * u10 Networks board. Requested by Phil Mulholland * . */ #define LINKTYPE_RAIF1 198 /* * IPMB packet for IPMI, beginning with the I2C slave address, followed * by the netFn and LUN, etc.. Requested by Chanthy Toeung * . */ #define LINKTYPE_IPMB 199 static struct linktype_map { int dlt; int linktype; } map[] = { /* * These DLT_* codes have LINKTYPE_* codes with values identical * to the values of the corresponding DLT_* code. */ { DLT_NULL, LINKTYPE_NULL }, { DLT_EN10MB, LINKTYPE_ETHERNET }, { DLT_EN3MB, LINKTYPE_EXP_ETHERNET }, { DLT_AX25, LINKTYPE_AX25 }, { DLT_PRONET, LINKTYPE_PRONET }, { DLT_CHAOS, LINKTYPE_CHAOS }, { DLT_IEEE802, LINKTYPE_TOKEN_RING }, { DLT_ARCNET, LINKTYPE_ARCNET }, { DLT_SLIP, LINKTYPE_SLIP }, { DLT_PPP, LINKTYPE_PPP }, { DLT_FDDI, LINKTYPE_FDDI }, /* * These DLT_* codes have different values on different * platforms; we map them to LINKTYPE_* codes that * have values that should never be equal to any DLT_* * code. */ #ifdef DLT_FR /* BSD/OS Frame Relay */ { DLT_FR, LINKTYPE_FRELAY }, #endif { DLT_SYMANTEC_FIREWALL, LINKTYPE_SYMANTEC_FIREWALL }, { DLT_ATM_RFC1483, LINKTYPE_ATM_RFC1483 }, { DLT_RAW, LINKTYPE_RAW }, { DLT_SLIP_BSDOS, LINKTYPE_SLIP_BSDOS }, { DLT_PPP_BSDOS, LINKTYPE_PPP_BSDOS }, /* BSD/OS Cisco HDLC */ { DLT_C_HDLC, LINKTYPE_C_HDLC }, /* * These DLT_* codes are not on all platforms, but, so far, * there don't appear to be any platforms that define * other codes with those values; we map them to * different LINKTYPE_* values anyway, just in case. */ /* Linux ATM Classical IP */ { DLT_ATM_CLIP, LINKTYPE_ATM_CLIP }, /* NetBSD sync/async serial PPP (or Cisco HDLC) */ { DLT_PPP_SERIAL, LINKTYPE_PPP_HDLC }, /* NetBSD PPP over Ethernet */ { DLT_PPP_ETHER, LINKTYPE_PPP_ETHER }, /* IEEE 802.11 wireless */ { DLT_IEEE802_11, LINKTYPE_IEEE802_11 }, /* Frame Relay */ { DLT_FRELAY, LINKTYPE_FRELAY }, /* OpenBSD loopback */ { DLT_LOOP, LINKTYPE_LOOP }, /* Linux cooked socket capture */ { DLT_LINUX_SLL, LINKTYPE_LINUX_SLL }, /* Apple LocalTalk hardware */ { DLT_LTALK, LINKTYPE_LTALK }, /* Acorn Econet */ { DLT_ECONET, LINKTYPE_ECONET }, /* OpenBSD DLT_PFLOG */ { DLT_PFLOG, LINKTYPE_PFLOG }, /* For Cisco-internal use */ { DLT_CISCO_IOS, LINKTYPE_CISCO_IOS }, /* Prism II monitor-mode header plus 802.11 header */ { DLT_PRISM_HEADER, LINKTYPE_PRISM_HEADER }, /* FreeBSD Aironet driver stuff */ { DLT_AIRONET_HEADER, LINKTYPE_AIRONET_HEADER }, /* Siemens HiPath HDLC */ { DLT_HHDLC, LINKTYPE_HHDLC }, /* RFC 2625 IP-over-Fibre Channel */ { DLT_IP_OVER_FC, LINKTYPE_IP_OVER_FC }, /* Solaris+SunATM */ { DLT_SUNATM, LINKTYPE_SUNATM }, /* RapidIO */ { DLT_RIO, LINKTYPE_RIO }, /* PCI Express */ { DLT_PCI_EXP, LINKTYPE_PCI_EXP }, /* Xilinx Aurora link layer */ { DLT_AURORA, LINKTYPE_AURORA }, /* 802.11 plus BSD radio header */ { DLT_IEEE802_11_RADIO, LINKTYPE_IEEE802_11_RADIO }, /* Tazmen Sniffer Protocol */ { DLT_TZSP, LINKTYPE_TZSP }, /* Arcnet with Linux-style link-layer headers */ { DLT_ARCNET_LINUX, LINKTYPE_ARCNET_LINUX }, /* Juniper-internal chassis encapsulation */ { DLT_JUNIPER_MLPPP, LINKTYPE_JUNIPER_MLPPP }, { DLT_JUNIPER_MLFR, LINKTYPE_JUNIPER_MLFR }, { DLT_JUNIPER_ES, LINKTYPE_JUNIPER_ES }, { DLT_JUNIPER_GGSN, LINKTYPE_JUNIPER_GGSN }, { DLT_JUNIPER_MFR, LINKTYPE_JUNIPER_MFR }, { DLT_JUNIPER_ATM2, LINKTYPE_JUNIPER_ATM2 }, { DLT_JUNIPER_SERVICES, LINKTYPE_JUNIPER_SERVICES }, { DLT_JUNIPER_ATM1, LINKTYPE_JUNIPER_ATM1 }, /* Apple IP-over-IEEE 1394 cooked header */ { DLT_APPLE_IP_OVER_IEEE1394, LINKTYPE_APPLE_IP_OVER_IEEE1394 }, /* SS7 */ { DLT_MTP2_WITH_PHDR, LINKTYPE_MTP2_WITH_PHDR }, { DLT_MTP2, LINKTYPE_MTP2 }, { DLT_MTP3, LINKTYPE_MTP3 }, { DLT_SCCP, LINKTYPE_SCCP }, /* DOCSIS MAC frames */ { DLT_DOCSIS, LINKTYPE_DOCSIS }, /* IrDA IrLAP packets + Linux-cooked header */ { DLT_LINUX_IRDA, LINKTYPE_LINUX_IRDA }, /* IBM SP and Next Federation switches */ { DLT_IBM_SP, LINKTYPE_IBM_SP }, { DLT_IBM_SN, LINKTYPE_IBM_SN }, /* 802.11 plus AVS radio header */ { DLT_IEEE802_11_RADIO_AVS, LINKTYPE_IEEE802_11_RADIO_AVS }, /* * Any platform that defines additional DLT_* codes should: * * request a LINKTYPE_* code and value from tcpdump.org, * as per the above; * * add, in their version of libpcap, an entry to map * those DLT_* codes to the corresponding LINKTYPE_* * code; * * redefine, in their "net/bpf.h", any DLT_* values * that collide with the values used by their additional * DLT_* codes, to remove those collisions (but without * making them collide with any of the LINKTYPE_* * values equal to 50 or above; they should also avoid * defining DLT_* values that collide with those * LINKTYPE_* values, either). */ /* Juniper-internal chassis encapsulation */ { DLT_JUNIPER_MONITOR, LINKTYPE_JUNIPER_MONITOR }, /* BACnet MS/TP */ { DLT_BACNET_MS_TP, LINKTYPE_BACNET_MS_TP }, /* PPP for pppd, with direction flag in the PPP header */ { DLT_PPP_PPPD, LINKTYPE_PPP_PPPD}, /* Juniper-internal chassis encapsulation */ { DLT_JUNIPER_PPPOE, LINKTYPE_JUNIPER_PPPOE }, { DLT_JUNIPER_PPPOE_ATM,LINKTYPE_JUNIPER_PPPOE_ATM }, /* GPRS LLC */ { DLT_GPRS_LLC, LINKTYPE_GPRS_LLC }, /* Transparent Generic Framing Procedure (ITU-T G.7041/Y.1303) */ { DLT_GPF_T, LINKTYPE_GPF_T }, /* Framed Generic Framing Procedure (ITU-T G.7041/Y.1303) */ { DLT_GPF_F, LINKTYPE_GPF_F }, { DLT_GCOM_T1E1, LINKTYPE_GCOM_T1E1 }, { DLT_GCOM_SERIAL, LINKTYPE_GCOM_SERIAL }, /* Juniper-internal chassis encapsulation */ { DLT_JUNIPER_PIC_PEER, LINKTYPE_JUNIPER_PIC_PEER }, /* Endace types */ { DLT_ERF_ETH, LINKTYPE_ERF_ETH }, { DLT_ERF_POS, LINKTYPE_ERF_POS }, /* viSDN LAPD */ { DLT_LINUX_LAPD, LINKTYPE_LINUX_LAPD }, /* Juniper meta-information before Ether, PPP, Frame Relay, C-HDLC Frames */ { DLT_JUNIPER_ETHER, LINKTYPE_JUNIPER_ETHER }, { DLT_JUNIPER_PPP, LINKTYPE_JUNIPER_PPP }, { DLT_JUNIPER_FRELAY, LINKTYPE_JUNIPER_FRELAY }, { DLT_JUNIPER_CHDLC, LINKTYPE_JUNIPER_CHDLC }, /* Multi Link Frame Relay (FRF.16) */ { DLT_MFR, LINKTYPE_MFR }, /* Juniper Voice PIC */ { DLT_JUNIPER_VP, LINKTYPE_JUNIPER_VP }, /* Controller Area Network (CAN) v2.0B */ { DLT_A429, LINKTYPE_A429 }, /* Arinc 653 Interpartition Communication messages */ { DLT_A653_ICM, LINKTYPE_A653_ICM }, /* USB */ { DLT_USB, LINKTYPE_USB }, /* Bluetooth HCI UART transport layer */ { DLT_BLUETOOTH_HCI_H4, LINKTYPE_BLUETOOTH_HCI_H4 }, /* IEEE 802.16 MAC Common Part Sublayer */ { DLT_IEEE802_16_MAC_CPS, LINKTYPE_IEEE802_16_MAC_CPS }, /* USB with Linux header */ { DLT_USB_LINUX, LINKTYPE_USB_LINUX }, /* Controller Area Network (CAN) v2.0B */ { DLT_CAN20B, LINKTYPE_CAN20B }, /* IEEE 802.15.4 with address fields padded */ { DLT_IEEE802_15_4_LINUX, LINKTYPE_IEEE802_15_4_LINUX }, /* Per Packet Information encapsulated packets */ { DLT_PPI, LINKTYPE_PPI }, /* IEEE 802.16 MAC Common Part Sublayer plus radiotap header */ { DLT_IEEE802_16_MAC_CPS_RADIO, LINKTYPE_IEEE802_16_MAC_CPS_RADIO }, /* Juniper Voice ISM */ { DLT_JUNIPER_ISM, LINKTYPE_JUNIPER_ISM }, /* IEEE 802.15.4 exactly as it appears in the spec */ { DLT_IEEE802_15_4, LINKTYPE_IEEE802_15_4 }, /* Various link-layer types for SITA */ { DLT_SITA, LINKTYPE_SITA }, /* Various link-layer types for Endace */ { DLT_ERF, LINKTYPE_ERF }, /* Special header for u10 Networks boards */ { DLT_RAIF1, LINKTYPE_RAIF1 }, /* IPMB */ { DLT_IPMB, LINKTYPE_IPMB }, { -1, -1 } }; static int dlt_to_linktype(int dlt) { int i; for (i = 0; map[i].dlt != -1; i++) { if (map[i].dlt == dlt) return (map[i].linktype); } /* * If we don't have a mapping for this DLT_ code, return an * error; that means that the table above needs to have an * entry added. */ return (-1); } static int linktype_to_dlt(int linktype) { int i; for (i = 0; map[i].linktype != -1; i++) { if (map[i].linktype == linktype) return (map[i].dlt); } /* * If we don't have an entry for this link type, return * the link type value; it may be a DLT_ value from an * older version of libpcap. */ return linktype; } static int sf_write_header(FILE *fp, int linktype, int thiszone, int snaplen) { struct pcap_file_header hdr; hdr.magic = TCPDUMP_MAGIC; hdr.version_major = PCAP_VERSION_MAJOR; hdr.version_minor = PCAP_VERSION_MINOR; hdr.thiszone = thiszone; hdr.snaplen = snaplen; hdr.sigfigs = 0; hdr.linktype = linktype; if (fwrite((char *)&hdr, sizeof(hdr), 1, fp) != 1) return (-1); return (0); } static void swap_hdr(struct pcap_file_header *hp) { hp->version_major = SWAPSHORT(hp->version_major); hp->version_minor = SWAPSHORT(hp->version_minor); hp->thiszone = SWAPLONG(hp->thiszone); hp->sigfigs = SWAPLONG(hp->sigfigs); hp->snaplen = SWAPLONG(hp->snaplen); hp->linktype = SWAPLONG(hp->linktype); } static int sf_getnonblock(pcap_t *p, char *errbuf) { /* * This is a savefile, not a live capture file, so never say * it's in non-blocking mode. */ return (0); } static int sf_setnonblock(pcap_t *p, int nonblock, char *errbuf) { /* * This is a savefile, not a live capture file, so ignore * requests to put it in non-blocking mode. */ return (0); } static int sf_stats(pcap_t *p, struct pcap_stat *ps) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "Statistics aren't available from savefiles"); return (-1); } static int sf_inject(pcap_t *p, const void *buf _U_, size_t size _U_) { strlcpy(p->errbuf, "Sending packets isn't supported on savefiles", PCAP_ERRBUF_SIZE); return (-1); } /* * Set direction flag: Which packets do we accept on a forwarding * single device? IN, OUT or both? */ static int sf_setdirection(pcap_t *p, pcap_direction_t d) { snprintf(p->errbuf, sizeof(p->errbuf), "Setting direction is not supported on savefiles"); return (-1); } static void sf_close(pcap_t *p) { if (p->sf.rfile != stdin) (void)fclose(p->sf.rfile); if (p->sf.base != NULL) free(p->sf.base); } pcap_t * pcap_open_offline(const char *fname, char *errbuf) { FILE *fp; pcap_t *p; if (fname[0] == '-' && fname[1] == '\0') { fp = stdin; #if defined(WIN32) || defined(MSDOS) /* * We're reading from the standard input, so put it in binary * mode, as savefiles are binary files. */ SET_BINMODE(fp); #endif } else { #if !defined(WIN32) && !defined(MSDOS) fp = fopen(fname, "r"); #else fp = fopen(fname, "rb"); #endif if (fp == NULL) { snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", fname, pcap_strerror(errno)); return (NULL); } } p = pcap_fopen_offline(fp, errbuf); if (p == NULL) { if (fp != stdin) fclose(fp); } return (p); } pcap_t * pcap_fopen_offline(FILE *fp, char *errbuf) { register pcap_t *p; struct pcap_file_header hdr; size_t amt_read; bpf_u_int32 magic; int linklen; p = (pcap_t *)malloc(sizeof(*p)); if (p == NULL) { strlcpy(errbuf, "out of swap", PCAP_ERRBUF_SIZE); return (NULL); } memset((char *)p, 0, sizeof(*p)); amt_read = fread((char *)&hdr, 1, sizeof(hdr), fp); if (amt_read != sizeof(hdr)) { if (ferror(fp)) { snprintf(errbuf, PCAP_ERRBUF_SIZE, "error reading dump file: %s", pcap_strerror(errno)); } else { snprintf(errbuf, PCAP_ERRBUF_SIZE, "truncated dump file; tried to read %lu file header bytes, only got %lu", (unsigned long)sizeof(hdr), (unsigned long)amt_read); } goto bad; } magic = hdr.magic; if (magic != TCPDUMP_MAGIC && magic != KUZNETZOV_TCPDUMP_MAGIC) { magic = SWAPLONG(magic); if (magic != TCPDUMP_MAGIC && magic != KUZNETZOV_TCPDUMP_MAGIC) { snprintf(errbuf, PCAP_ERRBUF_SIZE, "bad dump file format"); goto bad; } p->sf.swapped = 1; swap_hdr(&hdr); } if (magic == KUZNETZOV_TCPDUMP_MAGIC) { /* * XXX - the patch that's in some versions of libpcap * changes the packet header but not the magic number, * and some other versions with this magic number have * some extra debugging information in the packet header; * we'd have to use some hacks^H^H^H^H^Hheuristics to * detect those variants. * * Ethereal does that, but it does so by trying to read * the first two packets of the file with each of the * record header formats. That currently means it seeks * backwards and retries the reads, which doesn't work * on pipes. We want to be able to read from a pipe, so * that strategy won't work; we'd have to buffer some * data ourselves and read from that buffer in order to * make that work. */ p->sf.hdrsize = sizeof(struct pcap_sf_patched_pkthdr); } else p->sf.hdrsize = sizeof(struct pcap_sf_pkthdr); if (hdr.version_major < PCAP_VERSION_MAJOR) { snprintf(errbuf, PCAP_ERRBUF_SIZE, "archaic file format"); goto bad; } p->tzoff = hdr.thiszone; p->snapshot = hdr.snaplen; p->linktype = linktype_to_dlt(hdr.linktype); if (magic == KUZNETZOV_TCPDUMP_MAGIC && p->linktype == DLT_EN10MB) { /* * This capture might have been done in raw mode or cooked * mode. * * If it was done in cooked mode, p->snapshot was passed * to recvfrom() as the buffer size, meaning that the * most packet data that would be copied would be * p->snapshot. However, a faked Ethernet header would * then have been added to it, so the most data that would * be in a packet in the file would be p->snapshot + 14. * * We can't easily tell whether the capture was done in * raw mode or cooked mode, so we'll assume it was * cooked mode, and add 14 to the snapshot length. That * means that, for a raw capture, the snapshot length will * be misleading if you use it to figure out why a capture * doesn't have all the packet data, but there's not much * we can do to avoid that. */ p->snapshot += 14; } p->sf.rfile = fp; #ifndef WIN32 p->bufsize = hdr.snaplen; #else /* Allocate the space for pcap_pkthdr as well. It will be used by pcap_read_ex */ p->bufsize = hdr.snaplen+sizeof(struct pcap_pkthdr); #endif /* Align link header as required for proper data alignment */ /* XXX should handle all types */ switch (p->linktype) { case DLT_EN10MB: linklen = 14; break; case DLT_FDDI: linklen = 13 + 8; /* fddi_header + llc */ break; case DLT_NULL: default: linklen = 0; break; } if (p->bufsize < 0) p->bufsize = BPF_MAXBUFSIZE; p->sf.base = (u_char *)malloc(p->bufsize + BPF_ALIGNMENT); if (p->sf.base == NULL) { strlcpy(errbuf, "out of swap", PCAP_ERRBUF_SIZE); goto bad; } p->buffer = p->sf.base + BPF_ALIGNMENT - (linklen % BPF_ALIGNMENT); p->sf.version_major = hdr.version_major; p->sf.version_minor = hdr.version_minor; #ifdef PCAP_FDDIPAD /* Padding only needed for live capture fcode */ p->fddipad = 0; #endif /* * We interchanged the caplen and len fields at version 2.3, * in order to match the bpf header layout. But unfortunately * some files were written with version 2.3 in their headers * but without the interchanged fields. * * In addition, DG/UX tcpdump writes out files with a version * number of 543.0, and with the caplen and len fields in the * pre-2.3 order. */ switch (hdr.version_major) { case 2: if (hdr.version_minor < 3) p->sf.lengths_swapped = SWAPPED; else if (hdr.version_minor == 3) p->sf.lengths_swapped = MAYBE_SWAPPED; else p->sf.lengths_swapped = NOT_SWAPPED; break; case 543: p->sf.lengths_swapped = SWAPPED; break; default: p->sf.lengths_swapped = NOT_SWAPPED; break; } #if !defined(WIN32) && !defined(MSDOS) /* * You can do "select()" and "poll()" on plain files on most * platforms, and should be able to do so on pipes. * * You can't do "select()" on anything other than sockets in * Windows, so, on Win32 systems, we don't have "selectable_fd". */ p->selectable_fd = fileno(fp); #endif p->read_op = pcap_offline_read; p->inject_op = sf_inject; p->setfilter_op = install_bpf_program; p->setdirection_op = sf_setdirection; p->set_datalink_op = NULL; /* we don't support munging link-layer headers */ p->getnonblock_op = sf_getnonblock; p->setnonblock_op = sf_setnonblock; p->stats_op = sf_stats; p->close_op = sf_close; return (p); bad: free(p); return (NULL); } /* * Read sf_readfile and return the next packet. Return the header in hdr * and the contents in buf. Return 0 on success, SFERR_EOF if there were * no more packets, and SFERR_TRUNC if a partial packet was encountered. */ static int sf_next_packet(pcap_t *p, struct pcap_pkthdr *hdr, u_char *buf, u_int buflen) { struct pcap_sf_patched_pkthdr sf_hdr; FILE *fp = p->sf.rfile; size_t amt_read; bpf_u_int32 t; /* * Read the packet header; the structure we use as a buffer * is the longer structure for files generated by the patched * libpcap, but if the file has the magic number for an * unpatched libpcap we only read as many bytes as the regular * header has. */ amt_read = fread(&sf_hdr, 1, p->sf.hdrsize, fp); if (amt_read != p->sf.hdrsize) { if (ferror(fp)) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "error reading dump file: %s", pcap_strerror(errno)); return (-1); } else { if (amt_read != 0) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "truncated dump file; tried to read %d header bytes, only got %lu", p->sf.hdrsize, (unsigned long)amt_read); return (-1); } /* EOF */ return (1); } } if (p->sf.swapped) { /* these were written in opposite byte order */ hdr->caplen = SWAPLONG(sf_hdr.caplen); hdr->len = SWAPLONG(sf_hdr.len); hdr->ts.tv_sec = SWAPLONG(sf_hdr.ts.tv_sec); hdr->ts.tv_usec = SWAPLONG(sf_hdr.ts.tv_usec); } else { hdr->caplen = sf_hdr.caplen; hdr->len = sf_hdr.len; hdr->ts.tv_sec = sf_hdr.ts.tv_sec; hdr->ts.tv_usec = sf_hdr.ts.tv_usec; } /* Swap the caplen and len fields, if necessary. */ switch (p->sf.lengths_swapped) { case NOT_SWAPPED: break; case MAYBE_SWAPPED: if (hdr->caplen <= hdr->len) { /* * The captured length is <= the actual length, * so presumably they weren't swapped. */ break; } /* FALLTHROUGH */ case SWAPPED: t = hdr->caplen; hdr->caplen = hdr->len; hdr->len = t; break; } if (hdr->caplen > buflen) { /* * This can happen due to Solaris 2.3 systems tripping * over the BUFMOD problem and not setting the snapshot * correctly in the savefile header. If the caplen isn't * grossly wrong, try to salvage. */ static u_char *tp = NULL; static size_t tsize = 0; if (hdr->caplen > 65535) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "bogus savefile header"); return (-1); } if (tsize < hdr->caplen) { tsize = ((hdr->caplen + 1023) / 1024) * 1024; if (tp != NULL) free((u_char *)tp); tp = (u_char *)malloc(tsize); if (tp == NULL) { tsize = 0; snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "BUFMOD hack malloc"); return (-1); } } amt_read = fread((char *)tp, 1, hdr->caplen, fp); if (amt_read != hdr->caplen) { if (ferror(fp)) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "error reading dump file: %s", pcap_strerror(errno)); } else { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "truncated dump file; tried to read %u captured bytes, only got %lu", hdr->caplen, (unsigned long)amt_read); } return (-1); } /* * We can only keep up to buflen bytes. Since caplen > buflen * is exactly how we got here, we know we can only keep the * first buflen bytes and must drop the remainder. Adjust * caplen accordingly, so we don't get confused later as * to how many bytes we have to play with. */ hdr->caplen = buflen; memcpy((char *)buf, (char *)tp, buflen); } else { /* read the packet itself */ amt_read = fread((char *)buf, 1, hdr->caplen, fp); if (amt_read != hdr->caplen) { if (ferror(fp)) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "error reading dump file: %s", pcap_strerror(errno)); } else { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "truncated dump file; tried to read %u captured bytes, only got %lu", hdr->caplen, (unsigned long)amt_read); } return (-1); } } return (0); } /* * Print out packets stored in the file initialized by sf_read_init(). * If cnt > 0, return after 'cnt' packets, otherwise continue until eof. */ int pcap_offline_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user) { struct bpf_insn *fcode; int status = 0; int n = 0; while (status == 0) { struct pcap_pkthdr h; /* * Has "pcap_breakloop()" been called? * If so, return immediately - if we haven't read any * packets, clear the flag and return -2 to indicate * that we were told to break out of the loop, otherwise * leave the flag set, so that the *next* call will break * out of the loop without having read any packets, and * return the number of packets we've processed so far. */ if (p->break_loop) { if (n == 0) { p->break_loop = 0; return (-2); } else return (n); } status = sf_next_packet(p, &h, p->buffer, p->bufsize); if (status) { if (status == 1) return (0); return (status); } if ((fcode = p->fcode.bf_insns) == NULL || bpf_filter(fcode, p->buffer, h.len, h.caplen)) { (*callback)(user, &h, p->buffer); if (++n >= cnt && cnt > 0) break; } } /*XXX this breaks semantics tcpslice expects */ return (n); } /* * Output a packet to the initialized dump file. */ void pcap_dump(u_char *user, const struct pcap_pkthdr *h, const u_char *sp) { register FILE *f; struct pcap_sf_pkthdr sf_hdr; f = (FILE *)user; sf_hdr.ts.tv_sec = h->ts.tv_sec; sf_hdr.ts.tv_usec = h->ts.tv_usec; sf_hdr.caplen = h->caplen; sf_hdr.len = h->len; /* XXX we should check the return status */ (void)fwrite(&sf_hdr, sizeof(sf_hdr), 1, f); (void)fwrite(sp, h->caplen, 1, f); } static pcap_dumper_t * pcap_setup_dump(pcap_t *p, int linktype, FILE *f, const char *fname) { #if defined(WIN32) || defined(MSDOS) /* * If we're writing to the standard output, put it in binary * mode, as savefiles are binary files. * * Otherwise, we turn off buffering. * XXX - why? And why not on the standard output? */ if (f == stdout) SET_BINMODE(f); else setbuf(f, NULL); #endif if (sf_write_header(f, linktype, p->tzoff, p->snapshot) == -1) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "Can't write to %s: %s", fname, pcap_strerror(errno)); if (f != stdout) (void)fclose(f); return (NULL); } return ((pcap_dumper_t *)f); } /* * Initialize so that sf_write() will output to the file named 'fname'. */ pcap_dumper_t * pcap_dump_open(pcap_t *p, const char *fname) { FILE *f; int linktype; linktype = dlt_to_linktype(p->linktype); if (linktype == -1) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: link-layer type %d isn't supported in savefiles", fname, linktype); return (NULL); } if (fname[0] == '-' && fname[1] == '\0') { f = stdout; fname = "standard output"; } else { #if !defined(WIN32) && !defined(MSDOS) f = fopen(fname, "w"); #else f = fopen(fname, "wb"); #endif if (f == NULL) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s", fname, pcap_strerror(errno)); return (NULL); } } return (pcap_setup_dump(p, linktype, f, fname)); } /* * Initialize so that sf_write() will output to the given stream. */ pcap_dumper_t * pcap_dump_fopen(pcap_t *p, FILE *f) { int linktype; linktype = dlt_to_linktype(p->linktype); if (linktype == -1) { snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "stream: link-layer type %d isn't supported in savefiles", linktype); return (NULL); } return (pcap_setup_dump(p, linktype, f, "stream")); } FILE * pcap_dump_file(pcap_dumper_t *p) { return ((FILE *)p); } long pcap_dump_ftell(pcap_dumper_t *p) { return (ftell((FILE *)p)); } int pcap_dump_flush(pcap_dumper_t *p) { if (fflush((FILE *)p) == EOF) return (-1); else return (0); } void pcap_dump_close(pcap_dumper_t *p) { #ifdef notyet if (ferror((FILE *)p)) return-an-error; /* XXX should check return from fclose() too */ #endif (void)fclose((FILE *)p); }