/*- * Copyright (c) 1997, Stefan Esser * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_bus.h" /* XXX trim includes */ #include "opt_compat.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pcib_if.h" #include "pci_if.h" /* * This is the user interface to PCI configuration space. */ static d_open_t pci_open; static d_close_t pci_close; static int pci_conf_match(struct pci_match_conf *matches, int num_matches, struct pci_conf *match_buf); static d_ioctl_t pci_ioctl; struct cdevsw pcicdev = { .d_version = D_VERSION, .d_flags = D_NEEDGIANT, .d_open = pci_open, .d_close = pci_close, .d_ioctl = pci_ioctl, .d_name = "pci", }; static int pci_open(struct cdev *dev, int oflags, int devtype, struct thread *td) { int error; if (oflags & FWRITE) { error = securelevel_gt(td->td_ucred, 0); if (error) return (error); } return (0); } static int pci_close(struct cdev *dev, int flag, int devtype, struct thread *td) { return 0; } /* * Match a single pci_conf structure against an array of pci_match_conf * structures. The first argument, 'matches', is an array of num_matches * pci_match_conf structures. match_buf is a pointer to the pci_conf * structure that will be compared to every entry in the matches array. * This function returns 1 on failure, 0 on success. */ static int pci_conf_match(struct pci_match_conf *matches, int num_matches, struct pci_conf *match_buf) { int i; if ((matches == NULL) || (match_buf == NULL) || (num_matches <= 0)) return(1); for (i = 0; i < num_matches; i++) { /* * I'm not sure why someone would do this...but... */ if (matches[i].flags == PCI_GETCONF_NO_MATCH) continue; /* * Look at each of the match flags. If it's set, do the * comparison. If the comparison fails, we don't have a * match, go on to the next item if there is one. */ if (((matches[i].flags & PCI_GETCONF_MATCH_DOMAIN) != 0) && (match_buf->pc_sel.pc_domain != matches[i].pc_sel.pc_domain)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_BUS) != 0) && (match_buf->pc_sel.pc_bus != matches[i].pc_sel.pc_bus)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_DEV) != 0) && (match_buf->pc_sel.pc_dev != matches[i].pc_sel.pc_dev)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_FUNC) != 0) && (match_buf->pc_sel.pc_func != matches[i].pc_sel.pc_func)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_VENDOR) != 0) && (match_buf->pc_vendor != matches[i].pc_vendor)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_DEVICE) != 0) && (match_buf->pc_device != matches[i].pc_device)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_CLASS) != 0) && (match_buf->pc_class != matches[i].pc_class)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_UNIT) != 0) && (match_buf->pd_unit != matches[i].pd_unit)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_NAME) != 0) && (strncmp(matches[i].pd_name, match_buf->pd_name, sizeof(match_buf->pd_name)) != 0)) continue; return(0); } return(1); } #if defined(COMPAT_FREEBSD4) || defined(COMPAT_FREEBSD5) || \ defined(COMPAT_FREEBSD6) #define PRE7_COMPAT typedef enum { PCI_GETCONF_NO_MATCH_OLD = 0x00, PCI_GETCONF_MATCH_BUS_OLD = 0x01, PCI_GETCONF_MATCH_DEV_OLD = 0x02, PCI_GETCONF_MATCH_FUNC_OLD = 0x04, PCI_GETCONF_MATCH_NAME_OLD = 0x08, PCI_GETCONF_MATCH_UNIT_OLD = 0x10, PCI_GETCONF_MATCH_VENDOR_OLD = 0x20, PCI_GETCONF_MATCH_DEVICE_OLD = 0x40, PCI_GETCONF_MATCH_CLASS_OLD = 0x80 } pci_getconf_flags_old; struct pcisel_old { u_int8_t pc_bus; /* bus number */ u_int8_t pc_dev; /* device on this bus */ u_int8_t pc_func; /* function on this device */ }; struct pci_conf_old { struct pcisel_old pc_sel; /* bus+slot+function */ u_int8_t pc_hdr; /* PCI header type */ u_int16_t pc_subvendor; /* card vendor ID */ u_int16_t pc_subdevice; /* card device ID, assigned by card vendor */ u_int16_t pc_vendor; /* chip vendor ID */ u_int16_t pc_device; /* chip device ID, assigned by chip vendor */ u_int8_t pc_class; /* chip PCI class */ u_int8_t pc_subclass; /* chip PCI subclass */ u_int8_t pc_progif; /* chip PCI programming interface */ u_int8_t pc_revid; /* chip revision ID */ char pd_name[PCI_MAXNAMELEN + 1]; /* device name */ u_long pd_unit; /* device unit number */ }; struct pci_match_conf_old { struct pcisel_old pc_sel; /* bus+slot+function */ char pd_name[PCI_MAXNAMELEN + 1]; /* device name */ u_long pd_unit; /* Unit number */ u_int16_t pc_vendor; /* PCI Vendor ID */ u_int16_t pc_device; /* PCI Device ID */ u_int8_t pc_class; /* PCI class */ pci_getconf_flags_old flags; /* Matching expression */ }; struct pci_io_old { struct pcisel_old pi_sel; /* device to operate on */ int pi_reg; /* configuration register to examine */ int pi_width; /* width (in bytes) of read or write */ u_int32_t pi_data; /* data to write or result of read */ }; #define PCIOCGETCONF_OLD _IOWR('p', 1, struct pci_conf_io) #define PCIOCREAD_OLD _IOWR('p', 2, struct pci_io_old) #define PCIOCWRITE_OLD _IOWR('p', 3, struct pci_io_old) static int pci_conf_match_old(struct pci_match_conf_old *matches, int num_matches, struct pci_conf *match_buf); static int pci_conf_match_old(struct pci_match_conf_old *matches, int num_matches, struct pci_conf *match_buf) { int i; if ((matches == NULL) || (match_buf == NULL) || (num_matches <= 0)) return(1); for (i = 0; i < num_matches; i++) { if (match_buf->pc_sel.pc_domain != 0) continue; /* * I'm not sure why someone would do this...but... */ if (matches[i].flags == PCI_GETCONF_NO_MATCH_OLD) continue; /* * Look at each of the match flags. If it's set, do the * comparison. If the comparison fails, we don't have a * match, go on to the next item if there is one. */ if (((matches[i].flags & PCI_GETCONF_MATCH_BUS_OLD) != 0) && (match_buf->pc_sel.pc_bus != matches[i].pc_sel.pc_bus)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_DEV_OLD) != 0) && (match_buf->pc_sel.pc_dev != matches[i].pc_sel.pc_dev)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_FUNC_OLD) != 0) && (match_buf->pc_sel.pc_func != matches[i].pc_sel.pc_func)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_VENDOR_OLD) != 0) && (match_buf->pc_vendor != matches[i].pc_vendor)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_DEVICE_OLD) != 0) && (match_buf->pc_device != matches[i].pc_device)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_CLASS_OLD) != 0) && (match_buf->pc_class != matches[i].pc_class)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_UNIT_OLD) != 0) && (match_buf->pd_unit != matches[i].pd_unit)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_NAME_OLD) != 0) && (strncmp(matches[i].pd_name, match_buf->pd_name, sizeof(match_buf->pd_name)) != 0)) continue; return(0); } return(1); } #endif static int pci_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flag, struct thread *td) { device_t pcidev, brdev; void *confdata; const char *name; struct devlist *devlist_head; struct pci_conf_io *cio; struct pci_devinfo *dinfo; struct pci_io *io; struct pci_match_conf *pattern_buf; size_t confsz, iolen, pbufsz; int error, ionum, i, num_patterns; #ifdef PRE7_COMPAT struct pci_conf_old conf_old; struct pci_io iodata; struct pci_io_old *io_old; struct pci_match_conf_old *pattern_buf_old; io_old = NULL; pattern_buf_old = NULL; if (!(flag & FWRITE) && (cmd != PCIOCGETCONF && cmd != PCIOCGETCONF_OLD)) return EPERM; #else if (!(flag & FWRITE) && cmd != PCIOCGETCONF) return EPERM; #endif switch(cmd) { #ifdef PRE7_COMPAT case PCIOCGETCONF_OLD: /* FALLTHROUGH */ #endif case PCIOCGETCONF: cio = (struct pci_conf_io *)data; pattern_buf = NULL; num_patterns = 0; dinfo = NULL; cio->num_matches = 0; /* * If the user specified an offset into the device list, * but the list has changed since they last called this * ioctl, tell them that the list has changed. They will * have to get the list from the beginning. */ if ((cio->offset != 0) && (cio->generation != pci_generation)){ cio->status = PCI_GETCONF_LIST_CHANGED; error = 0; break; } /* * Check to see whether the user has asked for an offset * past the end of our list. */ if (cio->offset >= pci_numdevs) { cio->status = PCI_GETCONF_LAST_DEVICE; error = 0; break; } /* get the head of the device queue */ devlist_head = &pci_devq; /* * Determine how much room we have for pci_conf structures. * Round the user's buffer size down to the nearest * multiple of sizeof(struct pci_conf) in case the user * didn't specify a multiple of that size. */ #ifdef PRE7_COMPAT if (cmd == PCIOCGETCONF_OLD) confsz = sizeof(struct pci_conf_old); else #endif confsz = sizeof(struct pci_conf); iolen = min(cio->match_buf_len - (cio->match_buf_len % confsz), pci_numdevs * confsz); /* * Since we know that iolen is a multiple of the size of * the pciconf union, it's okay to do this. */ ionum = iolen / confsz; /* * If this test is true, the user wants the pci_conf * structures returned to match the supplied entries. */ if ((cio->num_patterns > 0) && (cio->num_patterns < pci_numdevs) && (cio->pat_buf_len > 0)) { /* * pat_buf_len needs to be: * num_patterns * sizeof(struct pci_match_conf) * While it is certainly possible the user just * allocated a large buffer, but set the number of * matches correctly, it is far more likely that * their kernel doesn't match the userland utility * they're using. It's also possible that the user * forgot to initialize some variables. Yes, this * may be overly picky, but I hazard to guess that * it's far more likely to just catch folks that * updated their kernel but not their userland. */ #ifdef PRE7_COMPAT if (cmd == PCIOCGETCONF_OLD) pbufsz = sizeof(struct pci_match_conf_old); else #endif pbufsz = sizeof(struct pci_match_conf); if (cio->num_patterns * pbufsz != cio->pat_buf_len) { /* The user made a mistake, return an error. */ cio->status = PCI_GETCONF_ERROR; error = EINVAL; break; } /* * Allocate a buffer to hold the patterns. */ #ifdef PRE7_COMPAT if (cmd == PCIOCGETCONF_OLD) { pattern_buf_old = malloc(cio->pat_buf_len, M_TEMP, M_WAITOK); error = copyin(cio->patterns, pattern_buf_old, cio->pat_buf_len); } else #endif { pattern_buf = malloc(cio->pat_buf_len, M_TEMP, M_WAITOK); error = copyin(cio->patterns, pattern_buf, cio->pat_buf_len); } if (error != 0) { error = EINVAL; goto getconfexit; } num_patterns = cio->num_patterns; } else if ((cio->num_patterns > 0) || (cio->pat_buf_len > 0)) { /* * The user made a mistake, spit out an error. */ cio->status = PCI_GETCONF_ERROR; error = EINVAL; break; } /* * Go through the list of devices and copy out the devices * that match the user's criteria. */ for (cio->num_matches = 0, error = 0, i = 0, dinfo = STAILQ_FIRST(devlist_head); (dinfo != NULL) && (cio->num_matches < ionum) && (error == 0) && (i < pci_numdevs) && (dinfo != NULL); dinfo = STAILQ_NEXT(dinfo, pci_links), i++) { if (i < cio->offset) continue; /* Populate pd_name and pd_unit */ name = NULL; if (dinfo->cfg.dev && dinfo->conf.pd_name[0] == '\0') name = device_get_name(dinfo->cfg.dev); if (name) { strncpy(dinfo->conf.pd_name, name, sizeof(dinfo->conf.pd_name)); dinfo->conf.pd_name[PCI_MAXNAMELEN] = 0; dinfo->conf.pd_unit = device_get_unit(dinfo->cfg.dev); } #ifdef PRE7_COMPAT if ((cmd == PCIOCGETCONF_OLD && (pattern_buf_old == NULL || pci_conf_match_old(pattern_buf_old, num_patterns, &dinfo->conf) == 0)) || (cmd == PCIOCGETCONF && (pattern_buf == NULL || pci_conf_match(pattern_buf, num_patterns, &dinfo->conf) == 0))) { #else if (pattern_buf == NULL || pci_conf_match(pattern_buf, num_patterns, &dinfo->conf) == 0) { #endif /* * If we've filled up the user's buffer, * break out at this point. Since we've * got a match here, we'll pick right back * up at the matching entry. We can also * tell the user that there are more matches * left. */ if (cio->num_matches >= ionum) break; #ifdef PRE7_COMPAT if (cmd == PCIOCGETCONF_OLD) { conf_old.pc_sel.pc_bus = dinfo->conf.pc_sel.pc_bus; conf_old.pc_sel.pc_dev = dinfo->conf.pc_sel.pc_dev; conf_old.pc_sel.pc_func = dinfo->conf.pc_sel.pc_func; conf_old.pc_hdr = dinfo->conf.pc_hdr; conf_old.pc_subvendor = dinfo->conf.pc_subvendor; conf_old.pc_subdevice = dinfo->conf.pc_subdevice; conf_old.pc_vendor = dinfo->conf.pc_vendor; conf_old.pc_device = dinfo->conf.pc_device; conf_old.pc_class = dinfo->conf.pc_class; conf_old.pc_subclass = dinfo->conf.pc_subclass; conf_old.pc_progif = dinfo->conf.pc_progif; conf_old.pc_revid = dinfo->conf.pc_revid; strncpy(conf_old.pd_name, dinfo->conf.pd_name, sizeof(conf_old.pd_name)); conf_old.pd_name[PCI_MAXNAMELEN] = 0; conf_old.pd_unit = dinfo->conf.pd_unit; confdata = &conf_old; } else #endif confdata = &dinfo->conf; /* Only if we can copy it out do we count it. */ if (!(error = copyout(confdata, (caddr_t)cio->matches + confsz * cio->num_matches, confsz))) cio->num_matches++; } } /* * Set the pointer into the list, so if the user is getting * n records at a time, where n < pci_numdevs, */ cio->offset = i; /* * Set the generation, the user will need this if they make * another ioctl call with offset != 0. */ cio->generation = pci_generation; /* * If this is the last device, inform the user so he won't * bother asking for more devices. If dinfo isn't NULL, we * know that there are more matches in the list because of * the way the traversal is done. */ if (dinfo == NULL) cio->status = PCI_GETCONF_LAST_DEVICE; else cio->status = PCI_GETCONF_MORE_DEVS; getconfexit: if (pattern_buf != NULL) free(pattern_buf, M_TEMP); #ifdef PRE7_COMPAT if (pattern_buf_old != NULL) free(pattern_buf_old, M_TEMP); #endif break; #ifdef PRE7_COMPAT case PCIOCREAD_OLD: case PCIOCWRITE_OLD: io_old = (struct pci_io_old *)data; iodata.pi_sel.pc_domain = 0; iodata.pi_sel.pc_bus = io_old->pi_sel.pc_bus; iodata.pi_sel.pc_dev = io_old->pi_sel.pc_dev; iodata.pi_sel.pc_func = io_old->pi_sel.pc_func; iodata.pi_reg = io_old->pi_reg; iodata.pi_width = io_old->pi_width; iodata.pi_data = io_old->pi_data; data = (caddr_t)&iodata; /* FALLTHROUGH */ #endif case PCIOCREAD: case PCIOCWRITE: io = (struct pci_io *)data; switch(io->pi_width) { case 4: case 2: case 1: /* Make sure register is in bounds and aligned. */ if (io->pi_reg < 0 || io->pi_reg + io->pi_width > PCI_REGMAX + 1 || io->pi_reg & (io->pi_width - 1)) { error = EINVAL; break; } /* * Assume that the user-level bus number is * in fact the physical PCI bus number. * Look up the grandparent, i.e. the bridge device, * so that we can issue configuration space cycles. */ pcidev = pci_find_dbsf(io->pi_sel.pc_domain, io->pi_sel.pc_bus, io->pi_sel.pc_dev, io->pi_sel.pc_func); if (pcidev) { brdev = device_get_parent( device_get_parent(pcidev)); #ifdef PRE7_COMPAT if (cmd == PCIOCWRITE || cmd == PCIOCWRITE_OLD) #else if (cmd == PCIOCWRITE) #endif PCIB_WRITE_CONFIG(brdev, io->pi_sel.pc_bus, io->pi_sel.pc_dev, io->pi_sel.pc_func, io->pi_reg, io->pi_data, io->pi_width); #ifdef PRE7_COMPAT else if (cmd == PCIOCREAD_OLD) io_old->pi_data = PCIB_READ_CONFIG(brdev, io->pi_sel.pc_bus, io->pi_sel.pc_dev, io->pi_sel.pc_func, io->pi_reg, io->pi_width); #endif else io->pi_data = PCIB_READ_CONFIG(brdev, io->pi_sel.pc_bus, io->pi_sel.pc_dev, io->pi_sel.pc_func, io->pi_reg, io->pi_width); error = 0; } else { #ifdef COMPAT_FREEBSD4 if (cmd == PCIOCREAD_OLD) { io_old->pi_data = -1; error = 0; } else #endif error = ENODEV; } break; default: error = EINVAL; break; } break; default: error = ENOTTY; break; } return (error); }