/*- * Copyright (c) 2007, 2008 Rui Paulo * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for Intel's On Die thermal sensor via MSR. * First introduced in Intel's Core line of processors. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include /* for curthread */ #include #include #include #include #include #define TZ_ZEROC 2732 #define THERM_STATUS_LOG 0x02 #define THERM_STATUS 0x01 #define THERM_STATUS_TEMP_SHIFT 16 #define THERM_STATUS_TEMP_MASK 0x7f #define THERM_STATUS_RES_SHIFT 27 #define THERM_STATUS_RES_MASK 0x0f #define THERM_STATUS_VALID_SHIFT 31 #define THERM_STATUS_VALID_MASK 0x01 struct coretemp_softc { device_t sc_dev; int sc_tjmax; unsigned int sc_throttle_log; }; /* * Device methods. */ static void coretemp_identify(driver_t *driver, device_t parent); static int coretemp_probe(device_t dev); static int coretemp_attach(device_t dev); static int coretemp_detach(device_t dev); static uint64_t coretemp_get_thermal_msr(int cpu); static void coretemp_clear_thermal_msr(int cpu); static int coretemp_get_val_sysctl(SYSCTL_HANDLER_ARGS); static int coretemp_throttle_log_sysctl(SYSCTL_HANDLER_ARGS); static device_method_t coretemp_methods[] = { /* Device interface */ DEVMETHOD(device_identify, coretemp_identify), DEVMETHOD(device_probe, coretemp_probe), DEVMETHOD(device_attach, coretemp_attach), DEVMETHOD(device_detach, coretemp_detach), {0, 0} }; static driver_t coretemp_driver = { "coretemp", coretemp_methods, sizeof(struct coretemp_softc), }; enum therm_info { CORETEMP_TEMP, CORETEMP_DELTA, CORETEMP_RESOLUTION, CORETEMP_TJMAX, }; static devclass_t coretemp_devclass; DRIVER_MODULE(coretemp, cpu, coretemp_driver, coretemp_devclass, NULL, NULL); static void coretemp_identify(driver_t *driver, device_t parent) { device_t child; u_int regs[4]; /* Make sure we're not being doubly invoked. */ if (device_find_child(parent, "coretemp", -1) != NULL) return; /* Check that CPUID 0x06 is supported and the vendor is Intel.*/ if (cpu_high < 6 || cpu_vendor_id != CPU_VENDOR_INTEL) return; /* * CPUID 0x06 returns 1 if the processor has on-die thermal * sensors. EBX[0:3] contains the number of sensors. */ do_cpuid(0x06, regs); if ((regs[0] & 0x1) != 1) return; /* * We add a child for each CPU since settings must be performed * on each CPU in the SMP case. */ child = device_add_child(parent, "coretemp", -1); if (child == NULL) device_printf(parent, "add coretemp child failed\n"); } static int coretemp_probe(device_t dev) { device_set_desc(dev, "CPU On-Die Thermal Sensors"); return (BUS_PROBE_GENERIC); } static int coretemp_attach(device_t dev) { struct coretemp_softc *sc = device_get_softc(dev); device_t pdev; uint64_t msr; int cpu_model, cpu_stepping; int ret, tjtarget; struct sysctl_oid *oid; struct sysctl_ctx_list *ctx; sc->sc_dev = dev; pdev = device_get_parent(dev); cpu_model = CPUID_TO_MODEL(cpu_id); cpu_stepping = cpu_id & CPUID_STEPPING; /* * Some CPUs, namely the PIII, don't have thermal sensors, but * report them when the CPUID check is performed in * coretemp_identify(). This leads to a later GPF when the sensor * is queried via a MSR, so we stop here. */ if (cpu_model < 0xe) return (ENXIO); #if 0 /* * XXXrpaulo: I have this CPU model and when it returns from C3 * coretemp continues to function properly. */ /* * Check for errata AE18. * "Processor Digital Thermal Sensor (DTS) Readout stops * updating upon returning from C3/C4 state." * * Adapted from the Linux coretemp driver. */ if (cpu_model == 0xe && cpu_stepping < 0xc) { msr = rdmsr(MSR_BIOS_SIGN); msr = msr >> 32; if (msr < 0x39) { device_printf(dev, "not supported (Intel errata " "AE18), try updating your BIOS\n"); return (ENXIO); } } #endif /* * Use 100C as the initial value. */ sc->sc_tjmax = 100; if ((cpu_model == 0xf && cpu_stepping >= 2) || cpu_model == 0xe) { /* * On some Core 2 CPUs, there's an undocumented MSR that * can tell us if Tj(max) is 100 or 85. * * The if-clause for CPUs having the MSR_IA32_EXT_CONFIG was adapted * from the Linux coretemp driver. */ msr = rdmsr(MSR_IA32_EXT_CONFIG); if (msr & (1 << 30)) sc->sc_tjmax = 85; } else if (cpu_model == 0x17) { switch (cpu_stepping) { case 0x6: /* Mobile Core 2 Duo */ sc->sc_tjmax = 105; break; default: /* Unknown stepping */ break; } } else if (cpu_model == 0x1c) { switch (cpu_stepping) { case 0xa: /* 45nm Atom D400, N400 and D500 series */ sc->sc_tjmax = 100; break; default: sc->sc_tjmax = 90; break; } } else { /* * Attempt to get Tj(max) from MSR IA32_TEMPERATURE_TARGET. * * This method is described in Intel white paper "CPU * Monitoring With DTS/PECI". (#322683) */ ret = rdmsr_safe(MSR_IA32_TEMPERATURE_TARGET, &msr); if (ret == 0) { tjtarget = (msr >> 16) & 0xff; /* * On earlier generation of processors, the value * obtained from IA32_TEMPERATURE_TARGET register is * an offset that needs to be summed with a model * specific base. It is however not clear what * these numbers are, with the publicly available * documents from Intel. * * For now, we consider [70, 110]C range, as * described in #322683, as "reasonable" and accept * these values whenever the MSR is available for * read, regardless the CPU model. */ if (tjtarget >= 70 && tjtarget <= 110) sc->sc_tjmax = tjtarget; else device_printf(dev, "Tj(target) value %d " "does not seem right.\n", tjtarget); } else device_printf(dev, "Can not get Tj(target) " "from your CPU, using 100C.\n"); } if (bootverbose) device_printf(dev, "Setting TjMax=%d\n", sc->sc_tjmax); ctx = device_get_sysctl_ctx(dev); oid = SYSCTL_ADD_NODE(ctx, SYSCTL_CHILDREN(device_get_sysctl_tree(pdev)), OID_AUTO, "coretemp", CTLFLAG_RD, NULL, "Per-CPU thermal information"); /* * Add the MIBs to dev.cpu.N and dev.cpu.N.coretemp. */ SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(device_get_sysctl_tree(pdev)), OID_AUTO, "temperature", CTLTYPE_INT | CTLFLAG_RD, dev, CORETEMP_TEMP, coretemp_get_val_sysctl, "IK", "Current temperature"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "delta", CTLTYPE_INT | CTLFLAG_RD, dev, CORETEMP_DELTA, coretemp_get_val_sysctl, "I", "Delta between TCC activation and current temperature"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "resolution", CTLTYPE_INT | CTLFLAG_RD, dev, CORETEMP_RESOLUTION, coretemp_get_val_sysctl, "I", "Resolution of CPU thermal sensor"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "tjmax", CTLTYPE_INT | CTLFLAG_RD, dev, CORETEMP_TJMAX, coretemp_get_val_sysctl, "IK", "TCC activation temperature"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "throttle_log", CTLTYPE_INT | CTLFLAG_RW, dev, 0, coretemp_throttle_log_sysctl, "I", "Set to 1 if the thermal sensor has tripped"); return (0); } static int coretemp_detach(device_t dev) { return (0); } static uint64_t coretemp_get_thermal_msr(int cpu) { uint64_t msr; thread_lock(curthread); sched_bind(curthread, cpu); thread_unlock(curthread); /* * The digital temperature reading is located at bit 16 * of MSR_THERM_STATUS. * * There is a bit on that MSR that indicates whether the * temperature is valid or not. * * The temperature is computed by subtracting the temperature * reading by Tj(max). */ msr = rdmsr(MSR_THERM_STATUS); thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); return (msr); } static void coretemp_clear_thermal_msr(int cpu) { thread_lock(curthread); sched_bind(curthread, cpu); thread_unlock(curthread); wrmsr(MSR_THERM_STATUS, 0); thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); } static int coretemp_get_val_sysctl(SYSCTL_HANDLER_ARGS) { device_t dev; uint64_t msr; int val, tmp; struct coretemp_softc *sc; enum therm_info type; char stemp[16]; dev = (device_t) arg1; msr = coretemp_get_thermal_msr(device_get_unit(dev)); sc = device_get_softc(dev); type = arg2; if (((msr >> THERM_STATUS_VALID_SHIFT) & THERM_STATUS_VALID_MASK) != 1) { val = -1; } else { switch (type) { case CORETEMP_TEMP: tmp = (msr >> THERM_STATUS_TEMP_SHIFT) & THERM_STATUS_TEMP_MASK; val = (sc->sc_tjmax - tmp) * 10 + TZ_ZEROC; break; case CORETEMP_DELTA: val = (msr >> THERM_STATUS_TEMP_SHIFT) & THERM_STATUS_TEMP_MASK; break; case CORETEMP_RESOLUTION: val = (msr >> THERM_STATUS_RES_SHIFT) & THERM_STATUS_RES_MASK; break; case CORETEMP_TJMAX: val = sc->sc_tjmax * 10 + TZ_ZEROC; break; } } if (msr & THERM_STATUS_LOG) { coretemp_clear_thermal_msr(device_get_unit(dev)); sc->sc_throttle_log = 1; /* * Check for Critical Temperature Status and Critical * Temperature Log. It doesn't really matter if the * current temperature is invalid because the "Critical * Temperature Log" bit will tell us if the Critical * Temperature has * been reached in past. It's not * directly related to the current temperature. * * If we reach a critical level, allow devctl(4) * to catch this and shutdown the system. */ if (msr & THERM_STATUS) { tmp = (msr >> THERM_STATUS_TEMP_SHIFT) & THERM_STATUS_TEMP_MASK; tmp = (sc->sc_tjmax - tmp) * 10 + TZ_ZEROC; device_printf(dev, "critical temperature detected, " "suggest system shutdown\n"); snprintf(stemp, sizeof(stemp), "%d", tmp); devctl_notify("coretemp", "Thermal", stemp, "notify=0xcc"); } } return (sysctl_handle_int(oidp, &val, 0, req)); } static int coretemp_throttle_log_sysctl(SYSCTL_HANDLER_ARGS) { device_t dev; uint64_t msr; int error, val; struct coretemp_softc *sc; dev = (device_t) arg1; msr = coretemp_get_thermal_msr(device_get_unit(dev)); sc = device_get_softc(dev); if (msr & THERM_STATUS_LOG) { coretemp_clear_thermal_msr(device_get_unit(dev)); sc->sc_throttle_log = 1; } val = sc->sc_throttle_log; error = sysctl_handle_int(oidp, &val, 0, req); if (error || !req->newptr) return (error); else if (val != 0) return (EINVAL); coretemp_clear_thermal_msr(device_get_unit(dev)); sc->sc_throttle_log = 0; return (0); }