/*- * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any * redistribution must be conditioned upon including a substantially * similar Disclaimer requirement for further binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. */ #include __FBSDID("$FreeBSD$"); /* * Driver for the Atheros Wireless LAN controller. * * This software is derived from work of Atsushi Onoe; his contribution * is greatly appreciated. */ #include "opt_inet.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif #define AR_DEBUG #include #include #include /* XXX for softled */ /* unalligned little endian access */ #define LE_READ_2(p) \ ((u_int16_t) \ ((((u_int8_t *)(p))[0] ) | (((u_int8_t *)(p))[1] << 8))) #define LE_READ_4(p) \ ((u_int32_t) \ ((((u_int8_t *)(p))[0] ) | (((u_int8_t *)(p))[1] << 8) | \ (((u_int8_t *)(p))[2] << 16) | (((u_int8_t *)(p))[3] << 24))) static void ath_init(void *); static void ath_stop_locked(struct ifnet *); static void ath_stop(struct ifnet *); static void ath_start(struct ifnet *); static int ath_reset(struct ifnet *); static int ath_media_change(struct ifnet *); static void ath_watchdog(struct ifnet *); static int ath_ioctl(struct ifnet *, u_long, caddr_t); static void ath_fatal_proc(void *, int); static void ath_rxorn_proc(void *, int); static void ath_bmiss_proc(void *, int); static void ath_initkeytable(struct ath_softc *); static int ath_key_alloc(struct ieee80211com *, const struct ieee80211_key *); static int ath_key_delete(struct ieee80211com *, const struct ieee80211_key *); static int ath_key_set(struct ieee80211com *, const struct ieee80211_key *, const u_int8_t mac[IEEE80211_ADDR_LEN]); static void ath_key_update_begin(struct ieee80211com *); static void ath_key_update_end(struct ieee80211com *); static void ath_mode_init(struct ath_softc *); static void ath_setslottime(struct ath_softc *); static void ath_updateslot(struct ifnet *); static int ath_beacon_alloc(struct ath_softc *, struct ieee80211_node *); static void ath_beacon_setup(struct ath_softc *, struct ath_buf *); static void ath_beacon_proc(void *, int); static void ath_bstuck_proc(void *, int); static void ath_beacon_free(struct ath_softc *); static void ath_beacon_config(struct ath_softc *); static void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *, ath_bufhead *); static int ath_desc_alloc(struct ath_softc *); static void ath_desc_free(struct ath_softc *); static struct ieee80211_node *ath_node_alloc(struct ieee80211_node_table *); static void ath_node_free(struct ieee80211_node *); static u_int8_t ath_node_getrssi(const struct ieee80211_node *); static int ath_rxbuf_init(struct ath_softc *, struct ath_buf *); static void ath_recv_mgmt(struct ieee80211com *ic, struct mbuf *m, struct ieee80211_node *ni, int subtype, int rssi, u_int32_t rstamp); static void ath_setdefantenna(struct ath_softc *, u_int); static void ath_rx_proc(void *, int); static struct ath_txq *ath_txq_setup(struct ath_softc*, int qtype, int subtype); static int ath_tx_setup(struct ath_softc *, int, int); static int ath_wme_update(struct ieee80211com *); static void ath_tx_cleanupq(struct ath_softc *, struct ath_txq *); static void ath_tx_cleanup(struct ath_softc *); static int ath_tx_start(struct ath_softc *, struct ieee80211_node *, struct ath_buf *, struct mbuf *); static void ath_tx_proc_q0(void *, int); static void ath_tx_proc_q0123(void *, int); static void ath_tx_proc(void *, int); static int ath_chan_set(struct ath_softc *, struct ieee80211_channel *); static void ath_draintxq(struct ath_softc *); static void ath_stoprecv(struct ath_softc *); static int ath_startrecv(struct ath_softc *); static void ath_chan_change(struct ath_softc *, struct ieee80211_channel *); static void ath_next_scan(void *); static void ath_calibrate(void *); static int ath_newstate(struct ieee80211com *, enum ieee80211_state, int); static void ath_newassoc(struct ieee80211com *, struct ieee80211_node *, int); static int ath_getchannels(struct ath_softc *, u_int cc, HAL_BOOL outdoor, HAL_BOOL xchanmode); static void ath_update_led(struct ath_softc *); static void ath_update_txpow(struct ath_softc *); static int ath_rate_setup(struct ath_softc *, u_int mode); static void ath_setcurmode(struct ath_softc *, enum ieee80211_phymode); static void ath_sysctlattach(struct ath_softc *); static void ath_bpfattach(struct ath_softc *); static void ath_announce(struct ath_softc *); SYSCTL_DECL(_hw_ath); /* XXX validate sysctl values */ static int ath_dwelltime = 200; /* 5 channels/second */ SYSCTL_INT(_hw_ath, OID_AUTO, dwell, CTLFLAG_RW, &ath_dwelltime, 0, "channel dwell time (ms) for AP/station scanning"); static int ath_calinterval = 30; /* calibrate every 30 secs */ SYSCTL_INT(_hw_ath, OID_AUTO, calibrate, CTLFLAG_RW, &ath_calinterval, 0, "chip calibration interval (secs)"); static int ath_outdoor = AH_TRUE; /* outdoor operation */ SYSCTL_INT(_hw_ath, OID_AUTO, outdoor, CTLFLAG_RD, &ath_outdoor, 0, "outdoor operation"); TUNABLE_INT("hw.ath.outdoor", &ath_outdoor); static int ath_xchanmode = AH_TRUE; /* extended channel use */ SYSCTL_INT(_hw_ath, OID_AUTO, xchanmode, CTLFLAG_RD, &ath_xchanmode, 0, "extended channel mode"); TUNABLE_INT("hw.ath.xchanmode", &ath_xchanmode); static int ath_countrycode = CTRY_DEFAULT; /* country code */ SYSCTL_INT(_hw_ath, OID_AUTO, countrycode, CTLFLAG_RD, &ath_countrycode, 0, "country code"); TUNABLE_INT("hw.ath.countrycode", &ath_countrycode); static int ath_regdomain = 0; /* regulatory domain */ SYSCTL_INT(_hw_ath, OID_AUTO, regdomain, CTLFLAG_RD, &ath_regdomain, 0, "regulatory domain"); #ifdef AR_DEBUG static int ath_debug = 0; SYSCTL_INT(_hw_ath, OID_AUTO, debug, CTLFLAG_RW, &ath_debug, 0, "control debugging printfs"); TUNABLE_INT("hw.ath.debug", &ath_debug); enum { ATH_DEBUG_XMIT = 0x00000001, /* basic xmit operation */ ATH_DEBUG_XMIT_DESC = 0x00000002, /* xmit descriptors */ ATH_DEBUG_RECV = 0x00000004, /* basic recv operation */ ATH_DEBUG_RECV_DESC = 0x00000008, /* recv descriptors */ ATH_DEBUG_RATE = 0x00000010, /* rate control */ ATH_DEBUG_RESET = 0x00000020, /* reset processing */ ATH_DEBUG_MODE = 0x00000040, /* mode init/setup */ ATH_DEBUG_BEACON = 0x00000080, /* beacon handling */ ATH_DEBUG_WATCHDOG = 0x00000100, /* watchdog timeout */ ATH_DEBUG_INTR = 0x00001000, /* ISR */ ATH_DEBUG_TX_PROC = 0x00002000, /* tx ISR proc */ ATH_DEBUG_RX_PROC = 0x00004000, /* rx ISR proc */ ATH_DEBUG_BEACON_PROC = 0x00008000, /* beacon ISR proc */ ATH_DEBUG_CALIBRATE = 0x00010000, /* periodic calibration */ ATH_DEBUG_KEYCACHE = 0x00020000, /* key cache management */ ATH_DEBUG_STATE = 0x00040000, /* 802.11 state transitions */ ATH_DEBUG_NODE = 0x00080000, /* node management */ ATH_DEBUG_FATAL = 0x80000000, /* fatal errors */ ATH_DEBUG_ANY = 0xffffffff }; #define IFF_DUMPPKTS(sc, m) \ ((sc->sc_debug & m) || \ (sc->sc_if.if_flags & (IFF_DEBUG|IFF_LINK2)) == (IFF_DEBUG|IFF_LINK2)) #define DPRINTF(sc, m, fmt, ...) do { \ if (sc->sc_debug & m) \ printf(fmt, __VA_ARGS__); \ } while (0) #define KEYPRINTF(sc, ix, hk, mac) do { \ if (sc->sc_debug & ATH_DEBUG_KEYCACHE) \ ath_keyprint(__func__, ix, hk, mac); \ } while (0) static void ath_printrxbuf(struct ath_buf *bf, int); static void ath_printtxbuf(struct ath_buf *bf, int); #else #define IFF_DUMPPKTS(sc, m) \ ((sc->sc_if.if_flags & (IFF_DEBUG|IFF_LINK2)) == (IFF_DEBUG|IFF_LINK2)) #define DPRINTF(m, fmt, ...) #define KEYPRINTF(sc, k, ix, mac) #endif MALLOC_DEFINE(M_ATHDEV, "athdev", "ath driver dma buffers"); int ath_attach(u_int16_t devid, struct ath_softc *sc) { struct ifnet *ifp = &sc->sc_if; struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah; HAL_STATUS status; int error = 0, i; DPRINTF(sc, ATH_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid); /* set these up early for if_printf use */ if_initname(ifp, device_get_name(sc->sc_dev), device_get_unit(sc->sc_dev)); ah = ath_hal_attach(devid, sc, sc->sc_st, sc->sc_sh, &status); if (ah == NULL) { if_printf(ifp, "unable to attach hardware; HAL status %u\n", status); error = ENXIO; goto bad; } if (ah->ah_abi != HAL_ABI_VERSION) { if_printf(ifp, "HAL ABI mismatch detected " "(HAL:0x%x != driver:0x%x)\n", ah->ah_abi, HAL_ABI_VERSION); error = ENXIO; goto bad; } sc->sc_ah = ah; sc->sc_invalid = 0; /* ready to go, enable interrupt handling */ /* * Check if the MAC has multi-rate retry support. * We do this by trying to setup a fake extended * descriptor. MAC's that don't have support will * return false w/o doing anything. MAC's that do * support it will return true w/o doing anything. */ sc->sc_mrretry = ath_hal_setupxtxdesc(ah, NULL, 0,0, 0,0, 0,0); /* * Check if the device has hardware counters for PHY * errors. If so we need to enable the MIB interrupt * so we can act on stat triggers. */ if (ath_hal_hwphycounters(ah)) sc->sc_needmib = 1; /* * Get the hardware key cache size. */ sc->sc_keymax = ath_hal_keycachesize(ah); if (sc->sc_keymax > sizeof(sc->sc_keymap) * NBBY) { if_printf(ifp, "Warning, using only %zu of %u key cache slots\n", sizeof(sc->sc_keymap) * NBBY, sc->sc_keymax); sc->sc_keymax = sizeof(sc->sc_keymap) * NBBY; } /* * Reset the key cache since some parts do not * reset the contents on initial power up. */ for (i = 0; i < sc->sc_keymax; i++) ath_hal_keyreset(ah, i); /* * Mark key cache slots associated with global keys * as in use. If we knew TKIP was not to be used we * could leave the +32, +64, and +32+64 slots free. * XXX only for splitmic. */ for (i = 0; i < IEEE80211_WEP_NKID; i++) { setbit(sc->sc_keymap, i); setbit(sc->sc_keymap, i+32); setbit(sc->sc_keymap, i+64); setbit(sc->sc_keymap, i+32+64); } /* * Collect the channel list using the default country * code and including outdoor channels. The 802.11 layer * is resposible for filtering this list based on settings * like the phy mode. */ error = ath_getchannels(sc, ath_countrycode, ath_outdoor, ath_xchanmode); if (error != 0) goto bad; /* * Setup dynamic sysctl's now that country code and * regdomain are available from the hal. */ ath_sysctlattach(sc); /* * Setup rate tables for all potential media types. */ ath_rate_setup(sc, IEEE80211_MODE_11A); ath_rate_setup(sc, IEEE80211_MODE_11B); ath_rate_setup(sc, IEEE80211_MODE_11G); ath_rate_setup(sc, IEEE80211_MODE_TURBO_A); ath_rate_setup(sc, IEEE80211_MODE_TURBO_G); /* NB: setup here so ath_rate_update is happy */ ath_setcurmode(sc, IEEE80211_MODE_11A); /* * Allocate tx+rx descriptors and populate the lists. */ error = ath_desc_alloc(sc); if (error != 0) { if_printf(ifp, "failed to allocate descriptors: %d\n", error); goto bad; } callout_init(&sc->sc_scan_ch, debug_mpsafenet ? CALLOUT_MPSAFE : 0); callout_init(&sc->sc_cal_ch, CALLOUT_MPSAFE); ATH_TXBUF_LOCK_INIT(sc); TASK_INIT(&sc->sc_rxtask, 0, ath_rx_proc, sc); TASK_INIT(&sc->sc_rxorntask, 0, ath_rxorn_proc, sc); TASK_INIT(&sc->sc_fataltask, 0, ath_fatal_proc, sc); TASK_INIT(&sc->sc_bmisstask, 0, ath_bmiss_proc, sc); TASK_INIT(&sc->sc_bstucktask, 0, ath_bstuck_proc, sc); /* * Allocate hardware transmit queues: one queue for * beacon frames and one data queue for each QoS * priority. Note that the hal handles reseting * these queues at the needed time. * * XXX PS-Poll */ sc->sc_bhalq = ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, NULL); if (sc->sc_bhalq == (u_int) -1) { if_printf(ifp, "unable to setup a beacon xmit queue!\n"); error = EIO; goto bad2; } sc->sc_cabq = ath_txq_setup(sc, HAL_TX_QUEUE_CAB, 0); if (sc->sc_cabq == NULL) { if_printf(ifp, "unable to setup CAB xmit queue!\n"); error = EIO; goto bad2; } /* NB: insure BK queue is the lowest priority h/w queue */ if (!ath_tx_setup(sc, WME_AC_BK, HAL_WME_AC_BK)) { if_printf(ifp, "unable to setup xmit queue for %s traffic!\n", ieee80211_wme_acnames[WME_AC_BK]); error = EIO; goto bad2; } if (!ath_tx_setup(sc, WME_AC_BE, HAL_WME_AC_BE) || !ath_tx_setup(sc, WME_AC_VI, HAL_WME_AC_VI) || !ath_tx_setup(sc, WME_AC_VO, HAL_WME_AC_VO)) { /* * Not enough hardware tx queues to properly do WME; * just punt and assign them all to the same h/w queue. * We could do a better job of this if, for example, * we allocate queues when we switch from station to * AP mode. */ if (sc->sc_ac2q[WME_AC_VI] != NULL) ath_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_VI]); if (sc->sc_ac2q[WME_AC_BE] != NULL) ath_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_BE]); sc->sc_ac2q[WME_AC_BE] = sc->sc_ac2q[WME_AC_BK]; sc->sc_ac2q[WME_AC_VI] = sc->sc_ac2q[WME_AC_BK]; sc->sc_ac2q[WME_AC_VO] = sc->sc_ac2q[WME_AC_BK]; } /* * Special case certain configurations. Note the * CAB queue is handled by these specially so don't * include them when checking the txq setup mask. */ switch (sc->sc_txqsetup &~ (1<sc_cabq->axq_qnum)) { case 0x01: TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc_q0, sc); break; case 0x0f: TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc_q0123, sc); break; default: TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc, sc); break; } /* * Setup rate control. Some rate control modules * call back to change the anntena state so expose * the necessary entry points. * XXX maybe belongs in struct ath_ratectrl? */ sc->sc_setdefantenna = ath_setdefantenna; sc->sc_rc = ath_rate_attach(sc); if (sc->sc_rc == NULL) { error = EIO; goto bad2; } sc->sc_ledstate = 1; /* * Auto-enable soft led processing for IBM cards and for * 5211 minipci cards. Users can also manually enable/disable * support with a sysctl. */ sc->sc_softled = (devid == AR5212_DEVID_IBM || devid == AR5211_DEVID); if (sc->sc_softled) { ath_hal_gpioCfgOutput(ah, sc->sc_ledpin); ath_hal_gpioset(ah, sc->sc_ledpin, 0); } ifp->if_softc = sc; ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; ifp->if_start = ath_start; ifp->if_watchdog = ath_watchdog; ifp->if_ioctl = ath_ioctl; ifp->if_init = ath_init; IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; IFQ_SET_READY(&ifp->if_snd); ic->ic_ifp = ifp; ic->ic_reset = ath_reset; ic->ic_newassoc = ath_newassoc; ic->ic_updateslot = ath_updateslot; ic->ic_wme.wme_update = ath_wme_update; /* XXX not right but it's not used anywhere important */ ic->ic_phytype = IEEE80211_T_OFDM; ic->ic_opmode = IEEE80211_M_STA; ic->ic_caps = IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ | IEEE80211_C_HOSTAP /* hostap mode */ | IEEE80211_C_MONITOR /* monitor mode */ | IEEE80211_C_SHPREAMBLE /* short preamble supported */ | IEEE80211_C_SHSLOT /* short slot time supported */ | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ ; /* * Query the hal to figure out h/w crypto support. */ if (ath_hal_ciphersupported(ah, HAL_CIPHER_WEP)) ic->ic_caps |= IEEE80211_C_WEP; if (ath_hal_ciphersupported(ah, HAL_CIPHER_AES_OCB)) ic->ic_caps |= IEEE80211_C_AES; if (ath_hal_ciphersupported(ah, HAL_CIPHER_AES_CCM)) ic->ic_caps |= IEEE80211_C_AES_CCM; if (ath_hal_ciphersupported(ah, HAL_CIPHER_CKIP)) ic->ic_caps |= IEEE80211_C_CKIP; if (ath_hal_ciphersupported(ah, HAL_CIPHER_TKIP)) { ic->ic_caps |= IEEE80211_C_TKIP; /* * Check if h/w does the MIC and/or whether the * separate key cache entries are required to * handle both tx+rx MIC keys. */ if (ath_hal_ciphersupported(ah, HAL_CIPHER_MIC)) ic->ic_caps |= IEEE80211_C_TKIPMIC; if (ath_hal_tkipsplit(ah)) sc->sc_splitmic = 1; } /* * TPC support can be done either with a global cap or * per-packet support. The latter is not available on * all parts. We're a bit pedantic here as all parts * support a global cap. */ sc->sc_hastpc = ath_hal_hastpc(ah); if (sc->sc_hastpc || ath_hal_hastxpowlimit(ah)) ic->ic_caps |= IEEE80211_C_TXPMGT; /* * Mark WME capability only if we have sufficient * hardware queues to do proper priority scheduling. */ if (sc->sc_ac2q[WME_AC_BE] != sc->sc_ac2q[WME_AC_BK]) ic->ic_caps |= IEEE80211_C_WME; /* * Check for frame bursting capability. */ if (ath_hal_hasbursting(ah)) ic->ic_caps |= IEEE80211_C_BURST; /* * Indicate we need the 802.11 header padded to a * 32-bit boundary for 4-address and QoS frames. */ ic->ic_flags |= IEEE80211_F_DATAPAD; /* * Query the hal about antenna support. */ if (ath_hal_hasdiversity(ah)) { sc->sc_hasdiversity = 1; sc->sc_diversity = ath_hal_getdiversity(ah); } sc->sc_defant = ath_hal_getdefantenna(ah); /* * Not all chips have the VEOL support we want to * use with IBSS beacons; check here for it. */ sc->sc_hasveol = ath_hal_hasveol(ah); /* get mac address from hardware */ ath_hal_getmac(ah, ic->ic_myaddr); /* call MI attach routine. */ ieee80211_ifattach(ic); /* override default methods */ ic->ic_node_alloc = ath_node_alloc; sc->sc_node_free = ic->ic_node_free; ic->ic_node_free = ath_node_free; ic->ic_node_getrssi = ath_node_getrssi; sc->sc_recv_mgmt = ic->ic_recv_mgmt; ic->ic_recv_mgmt = ath_recv_mgmt; sc->sc_newstate = ic->ic_newstate; ic->ic_newstate = ath_newstate; ic->ic_crypto.cs_key_alloc = ath_key_alloc; ic->ic_crypto.cs_key_delete = ath_key_delete; ic->ic_crypto.cs_key_set = ath_key_set; ic->ic_crypto.cs_key_update_begin = ath_key_update_begin; ic->ic_crypto.cs_key_update_end = ath_key_update_end; /* complete initialization */ ieee80211_media_init(ic, ath_media_change, ieee80211_media_status); ath_bpfattach(sc); if (bootverbose) ieee80211_announce(ic); ath_announce(sc); return 0; bad2: ath_tx_cleanup(sc); ath_desc_free(sc); bad: if (ah) ath_hal_detach(ah); sc->sc_invalid = 1; return error; } int ath_detach(struct ath_softc *sc) { struct ifnet *ifp = &sc->sc_if; DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", __func__, ifp->if_flags); ath_stop(ifp); bpfdetach(ifp); /* * NB: the order of these is important: * o call the 802.11 layer before detaching the hal to * insure callbacks into the driver to delete global * key cache entries can be handled * o reclaim the tx queue data structures after calling * the 802.11 layer as we'll get called back to reclaim * node state and potentially want to use them * o to cleanup the tx queues the hal is called, so detach * it last * Other than that, it's straightforward... */ ieee80211_ifdetach(&sc->sc_ic); ath_rate_detach(sc->sc_rc); ath_desc_free(sc); ath_tx_cleanup(sc); ath_hal_detach(sc->sc_ah); return 0; } void ath_suspend(struct ath_softc *sc) { struct ifnet *ifp = &sc->sc_if; DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", __func__, ifp->if_flags); ath_stop(ifp); } void ath_resume(struct ath_softc *sc) { struct ifnet *ifp = &sc->sc_if; DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", __func__, ifp->if_flags); if (ifp->if_flags & IFF_UP) { ath_init(ifp); if (ifp->if_flags & IFF_RUNNING) ath_start(ifp); } } void ath_shutdown(struct ath_softc *sc) { struct ifnet *ifp = &sc->sc_if; DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", __func__, ifp->if_flags); ath_stop(ifp); } /* * Interrupt handler. Most of the actual processing is deferred. */ void ath_intr(void *arg) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; struct ath_hal *ah = sc->sc_ah; HAL_INT status; if (sc->sc_invalid) { /* * The hardware is not ready/present, don't touch anything. * Note this can happen early on if the IRQ is shared. */ DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid; ignored\n", __func__); return; } if (!ath_hal_intrpend(ah)) /* shared irq, not for us */ return; if ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) != (IFF_RUNNING|IFF_UP)) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags 0x%x\n", __func__, ifp->if_flags); ath_hal_getisr(ah, &status); /* clear ISR */ ath_hal_intrset(ah, 0); /* disable further intr's */ return; } /* * Figure out the reason(s) for the interrupt. Note * that the hal returns a pseudo-ISR that may include * bits we haven't explicitly enabled so we mask the * value to insure we only process bits we requested. */ ath_hal_getisr(ah, &status); /* NB: clears ISR too */ DPRINTF(sc, ATH_DEBUG_INTR, "%s: status 0x%x\n", __func__, status); status &= sc->sc_imask; /* discard unasked for bits */ if (status & HAL_INT_FATAL) { /* * Fatal errors are unrecoverable. Typically * these are caused by DMA errors. Unfortunately * the exact reason is not (presently) returned * by the hal. */ sc->sc_stats.ast_hardware++; ath_hal_intrset(ah, 0); /* disable intr's until reset */ taskqueue_enqueue(taskqueue_swi, &sc->sc_fataltask); } else if (status & HAL_INT_RXORN) { sc->sc_stats.ast_rxorn++; ath_hal_intrset(ah, 0); /* disable intr's until reset */ taskqueue_enqueue(taskqueue_swi, &sc->sc_rxorntask); } else { if (status & HAL_INT_SWBA) { /* * Software beacon alert--time to send a beacon. * Handle beacon transmission directly; deferring * this is too slow to meet timing constraints * under load. */ ath_beacon_proc(sc, 0); } if (status & HAL_INT_RXEOL) { /* * NB: the hardware should re-read the link when * RXE bit is written, but it doesn't work at * least on older hardware revs. */ sc->sc_stats.ast_rxeol++; sc->sc_rxlink = NULL; } if (status & HAL_INT_TXURN) { sc->sc_stats.ast_txurn++; /* bump tx trigger level */ ath_hal_updatetxtriglevel(ah, AH_TRUE); } if (status & HAL_INT_RX) taskqueue_enqueue(taskqueue_swi, &sc->sc_rxtask); if (status & HAL_INT_TX) taskqueue_enqueue(taskqueue_swi, &sc->sc_txtask); if (status & HAL_INT_BMISS) { sc->sc_stats.ast_bmiss++; taskqueue_enqueue(taskqueue_swi, &sc->sc_bmisstask); } if (status & HAL_INT_MIB) { sc->sc_stats.ast_mib++; /* * Disable interrupts until we service the MIB * interrupt; otherwise it will continue to fire. */ ath_hal_intrset(ah, 0); /* * Let the hal handle the event. We assume it will * clear whatever condition caused the interrupt. */ ath_hal_mibevent(ah, &ATH_NODE(sc->sc_ic.ic_bss)->an_halstats); ath_hal_intrset(ah, sc->sc_imask); } } } static void ath_fatal_proc(void *arg, int pending) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; if_printf(ifp, "hardware error; resetting\n"); ath_reset(ifp); } static void ath_rxorn_proc(void *arg, int pending) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; if_printf(ifp, "rx FIFO overrun; resetting\n"); ath_reset(ifp); } static void ath_bmiss_proc(void *arg, int pending) { struct ath_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; DPRINTF(sc, ATH_DEBUG_ANY, "%s: pending %u\n", __func__, pending); KASSERT(ic->ic_opmode == IEEE80211_M_STA, ("unexpect operating mode %u", ic->ic_opmode)); if (ic->ic_state == IEEE80211_S_RUN) { /* * Rather than go directly to scan state, try to * reassociate first. If that fails then the state * machine will drop us into scanning after timing * out waiting for a probe response. */ NET_LOCK_GIANT(); ieee80211_new_state(ic, IEEE80211_S_ASSOC, -1); NET_UNLOCK_GIANT(); } } static u_int ath_chan2flags(struct ieee80211com *ic, struct ieee80211_channel *chan) { #define N(a) (sizeof(a) / sizeof(a[0])) static const u_int modeflags[] = { 0, /* IEEE80211_MODE_AUTO */ CHANNEL_A, /* IEEE80211_MODE_11A */ CHANNEL_B, /* IEEE80211_MODE_11B */ CHANNEL_PUREG, /* IEEE80211_MODE_11G */ 0, /* IEEE80211_MODE_FH */ CHANNEL_T, /* IEEE80211_MODE_TURBO_A */ CHANNEL_108G /* IEEE80211_MODE_TURBO_G */ }; enum ieee80211_phymode mode = ieee80211_chan2mode(ic, chan); KASSERT(mode < N(modeflags), ("unexpected phy mode %u", mode)); KASSERT(modeflags[mode] != 0, ("mode %u undefined", mode)); return modeflags[mode]; #undef N } static void ath_init(void *arg) { struct ath_softc *sc = (struct ath_softc *) arg; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &sc->sc_if; struct ieee80211_node *ni; enum ieee80211_phymode mode; struct ath_hal *ah = sc->sc_ah; HAL_STATUS status; DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags 0x%x\n", __func__, ifp->if_flags); ATH_LOCK(sc); /* * Stop anything previously setup. This is safe * whether this is the first time through or not. */ ath_stop_locked(ifp); /* * The basic interface to setting the hardware in a good * state is ``reset''. On return the hardware is known to * be powered up and with interrupts disabled. This must * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ sc->sc_curchan.channel = ic->ic_ibss_chan->ic_freq; sc->sc_curchan.channelFlags = ath_chan2flags(ic, ic->ic_ibss_chan); if (!ath_hal_reset(ah, ic->ic_opmode, &sc->sc_curchan, AH_FALSE, &status)) { if_printf(ifp, "unable to reset hardware; hal status %u\n", status); goto done; } /* * This is needed only to setup initial state * but it's best done after a reset. */ ath_update_txpow(sc); /* * Setup the hardware after reset: the key cache * is filled as needed and the receive engine is * set going. Frame transmit is handled entirely * in the frame output path; there's nothing to do * here except setup the interrupt mask. */ ath_initkeytable(sc); /* XXX still needed? */ if (ath_startrecv(sc) != 0) { if_printf(ifp, "unable to start recv logic\n"); goto done; } /* * Enable interrupts. */ sc->sc_imask = HAL_INT_RX | HAL_INT_TX | HAL_INT_RXEOL | HAL_INT_RXORN | HAL_INT_FATAL | HAL_INT_GLOBAL; /* * Enable MIB interrupts when there are hardware phy counters. * Note we only do this (at the moment) for station mode. */ if (sc->sc_needmib && ic->ic_opmode == IEEE80211_M_STA) sc->sc_imask |= HAL_INT_MIB; ath_hal_intrset(ah, sc->sc_imask); ifp->if_flags |= IFF_RUNNING; ic->ic_state = IEEE80211_S_INIT; /* * The hardware should be ready to go now so it's safe * to kick the 802.11 state machine as it's likely to * immediately call back to us to send mgmt frames. */ ni = ic->ic_bss; ni->ni_chan = ic->ic_ibss_chan; mode = ieee80211_chan2mode(ic, ni->ni_chan); if (mode != sc->sc_curmode) ath_setcurmode(sc, mode); if (ic->ic_opmode != IEEE80211_M_MONITOR) { if (ic->ic_roaming != IEEE80211_ROAMING_MANUAL) ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); } else ieee80211_new_state(ic, IEEE80211_S_RUN, -1); done: ATH_UNLOCK(sc); } static void ath_stop_locked(struct ifnet *ifp) { struct ath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid %u if_flags 0x%x\n", __func__, sc->sc_invalid, ifp->if_flags); ATH_LOCK_ASSERT(sc); if (ifp->if_flags & IFF_RUNNING) { /* * Shutdown the hardware and driver: * reset 802.11 state machine * turn off timers * disable interrupts * turn off the radio * clear transmit machinery * clear receive machinery * drain and release tx queues * reclaim beacon resources * power down hardware * * Note that some of this work is not possible if the * hardware is gone (invalid). */ ieee80211_new_state(ic, IEEE80211_S_INIT, -1); ifp->if_flags &= ~IFF_RUNNING; ifp->if_timer = 0; if (!sc->sc_invalid) { if (sc->sc_softled) ath_hal_gpioset(ah, sc->sc_ledpin, 1); ath_hal_intrset(ah, 0); } ath_draintxq(sc); if (!sc->sc_invalid) { ath_stoprecv(sc); ath_hal_phydisable(ah); } else sc->sc_rxlink = NULL; IFQ_DRV_PURGE(&ifp->if_snd); ath_beacon_free(sc); } } static void ath_stop(struct ifnet *ifp) { struct ath_softc *sc = ifp->if_softc; ATH_LOCK(sc); ath_stop_locked(ifp); if (!sc->sc_invalid) { /* * Set the chip in full sleep mode. Note that we are * careful to do this only when bringing the interface * completely to a stop. When the chip is in this state * it must be carefully woken up or references to * registers in the PCI clock domain may freeze the bus * (and system). This varies by chip and is mostly an * issue with newer parts that go to sleep more quickly. */ ath_hal_setpower(sc->sc_ah, HAL_PM_FULL_SLEEP, 0); } ATH_UNLOCK(sc); } /* * Reset the hardware w/o losing operational state. This is * basically a more efficient way of doing ath_stop, ath_init, * followed by state transitions to the current 802.11 * operational state. Used to recover from various errors and * to reset or reload hardware state. */ static int ath_reset(struct ifnet *ifp) { struct ath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; struct ieee80211_channel *c; HAL_STATUS status; /* * Convert to a HAL channel description with the flags * constrained to reflect the current operating mode. */ c = ic->ic_ibss_chan; sc->sc_curchan.channel = c->ic_freq; sc->sc_curchan.channelFlags = ath_chan2flags(ic, c); ath_hal_intrset(ah, 0); /* disable interrupts */ ath_draintxq(sc); /* stop xmit side */ ath_stoprecv(sc); /* stop recv side */ /* NB: indicate channel change so we do a full reset */ if (!ath_hal_reset(ah, ic->ic_opmode, &sc->sc_curchan, AH_TRUE, &status)) if_printf(ifp, "%s: unable to reset hardware; hal status %u\n", __func__, status); ath_update_txpow(sc); /* update tx power state */ if (ath_startrecv(sc) != 0) /* restart recv */ if_printf(ifp, "%s: unable to start recv logic\n", __func__); /* * We may be doing a reset in response to an ioctl * that changes the channel so update any state that * might change as a result. */ ath_chan_change(sc, c); if (ic->ic_state == IEEE80211_S_RUN) ath_beacon_config(sc); /* restart beacons */ ath_hal_intrset(ah, sc->sc_imask); ath_start(ifp); /* restart xmit */ return 0; } static void ath_start(struct ifnet *ifp) { struct ath_softc *sc = ifp->if_softc; struct ath_hal *ah = sc->sc_ah; struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_node *ni; struct ath_buf *bf; struct mbuf *m; struct ieee80211_frame *wh; struct ether_header *eh; if ((ifp->if_flags & IFF_RUNNING) == 0 || sc->sc_invalid) return; for (;;) { /* * Grab a TX buffer and associated resources. */ ATH_TXBUF_LOCK(sc); bf = STAILQ_FIRST(&sc->sc_txbuf); if (bf != NULL) STAILQ_REMOVE_HEAD(&sc->sc_txbuf, bf_list); ATH_TXBUF_UNLOCK(sc); if (bf == NULL) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: out of xmit buffers\n", __func__); sc->sc_stats.ast_tx_qstop++; ifp->if_flags |= IFF_OACTIVE; break; } /* * Poll the management queue for frames; they * have priority over normal data frames. */ IF_DEQUEUE(&ic->ic_mgtq, m); if (m == NULL) { /* * No data frames go out unless we're associated. */ if (ic->ic_state != IEEE80211_S_RUN) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: ignore data packet, state %u\n", __func__, ic->ic_state); sc->sc_stats.ast_tx_discard++; ATH_TXBUF_LOCK(sc); STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); ATH_TXBUF_UNLOCK(sc); break; } IFQ_DRV_DEQUEUE(&ifp->if_snd, m); /* XXX: LOCK */ if (m == NULL) { ATH_TXBUF_LOCK(sc); STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); ATH_TXBUF_UNLOCK(sc); break; } /* * Find the node for the destination so we can do * things like power save and fast frames aggregation. */ if (m->m_len < sizeof(struct ether_header) && (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { ic->ic_stats.is_tx_nobuf++; /* XXX */ ni = NULL; goto bad; } eh = mtod(m, struct ether_header *); ni = ieee80211_find_txnode(ic, eh->ether_dhost); if (ni == NULL) { /* NB: ieee80211_find_txnode does stat+msg */ goto bad; } if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && (m->m_flags & M_PWR_SAV) == 0) { /* * Station in power save mode; pass the frame * to the 802.11 layer and continue. We'll get * the frame back when the time is right. */ ieee80211_pwrsave(ic, ni, m); goto reclaim; } /* calculate priority so we can find the tx queue */ if (ieee80211_classify(ic, m, ni)) { DPRINTF(sc, ATH_DEBUG_XMIT, "%s: discard, classification failure\n", __func__); goto bad; } ifp->if_opackets++; BPF_MTAP(ifp, m); /* * Encapsulate the packet in prep for transmission. */ m = ieee80211_encap(ic, m, ni); if (m == NULL) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: encapsulation failure\n", __func__); sc->sc_stats.ast_tx_encap++; goto bad; } } else { /* * Hack! The referenced node pointer is in the * rcvif field of the packet header. This is * placed there by ieee80211_mgmt_output because * we need to hold the reference with the frame * and there's no other way (other than packet * tags which we consider too expensive to use) * to pass it along. */ ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; m->m_pkthdr.rcvif = NULL; wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PROBE_RESP) { /* fill time stamp */ u_int64_t tsf; u_int32_t *tstamp; tsf = ath_hal_gettsf64(ah); /* XXX: adjust 100us delay to xmit */ tsf += 100; tstamp = (u_int32_t *)&wh[1]; tstamp[0] = htole32(tsf & 0xffffffff); tstamp[1] = htole32(tsf >> 32); } sc->sc_stats.ast_tx_mgmt++; } if (ath_tx_start(sc, ni, bf, m)) { bad: ifp->if_oerrors++; reclaim: ATH_TXBUF_LOCK(sc); STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); ATH_TXBUF_UNLOCK(sc); if (ni != NULL) ieee80211_free_node(ni); continue; } sc->sc_tx_timer = 5; ifp->if_timer = 1; } } static int ath_media_change(struct ifnet *ifp) { #define IS_UP(ifp) \ ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) == (IFF_RUNNING|IFF_UP)) int error; error = ieee80211_media_change(ifp); if (error == ENETRESET) { if (IS_UP(ifp)) ath_init(ifp); /* XXX lose error */ error = 0; } return error; #undef IS_UP } #ifdef AR_DEBUG static void ath_keyprint(const char *tag, u_int ix, const HAL_KEYVAL *hk, const u_int8_t mac[IEEE80211_ADDR_LEN]) { static const char *ciphers[] = { "WEP", "AES-OCB", "AES-CCM", "CKIP", "TKIP", "CLR", }; int i, n; printf("%s: [%02u] %-7s ", tag, ix, ciphers[hk->kv_type]); for (i = 0, n = hk->kv_len; i < n; i++) printf("%02x", hk->kv_val[i]); printf(" mac %s", ether_sprintf(mac)); if (hk->kv_type == HAL_CIPHER_TKIP) { printf(" mic "); for (i = 0; i < sizeof(hk->kv_mic); i++) printf("%02x", hk->kv_mic[i]); } printf("\n"); } #endif /* * Set a TKIP key into the hardware. This handles the * potential distribution of key state to multiple key * cache slots for TKIP. */ static int ath_keyset_tkip(struct ath_softc *sc, const struct ieee80211_key *k, HAL_KEYVAL *hk, const u_int8_t mac[IEEE80211_ADDR_LEN]) { #define IEEE80211_KEY_XR (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV) static const u_int8_t zerobssid[IEEE80211_ADDR_LEN]; struct ath_hal *ah = sc->sc_ah; KASSERT(k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP, ("got a non-TKIP key, cipher %u", k->wk_cipher->ic_cipher)); KASSERT(sc->sc_splitmic, ("key cache !split")); if ((k->wk_flags & IEEE80211_KEY_XR) == IEEE80211_KEY_XR) { /* * TX key goes at first index, RX key at +32. * The hal handles the MIC keys at index+64. */ memcpy(hk->kv_mic, k->wk_txmic, sizeof(hk->kv_mic)); KEYPRINTF(sc, k->wk_keyix, hk, zerobssid); if (!ath_hal_keyset(ah, k->wk_keyix, hk, zerobssid)) return 0; memcpy(hk->kv_mic, k->wk_rxmic, sizeof(hk->kv_mic)); KEYPRINTF(sc, k->wk_keyix+32, hk, mac); /* XXX delete tx key on failure? */ return ath_hal_keyset(ah, k->wk_keyix+32, hk, mac); } else if (k->wk_flags & IEEE80211_KEY_XR) { /* * TX/RX key goes at first index. * The hal handles the MIC keys are index+64. */ KASSERT(k->wk_keyix < IEEE80211_WEP_NKID, ("group key at index %u", k->wk_keyix)); memcpy(hk->kv_mic, k->wk_flags & IEEE80211_KEY_XMIT ? k->wk_txmic : k->wk_rxmic, sizeof(hk->kv_mic)); KEYPRINTF(sc, k->wk_keyix, hk, zerobssid); return ath_hal_keyset(ah, k->wk_keyix, hk, zerobssid); } /* XXX key w/o xmit/recv; need this for compression? */ return 0; #undef IEEE80211_KEY_XR } /* * Set a net80211 key into the hardware. This handles the * potential distribution of key state to multiple key * cache slots for TKIP with hardware MIC support. */ static int ath_keyset(struct ath_softc *sc, const struct ieee80211_key *k, const u_int8_t mac[IEEE80211_ADDR_LEN]) { #define N(a) (sizeof(a)/sizeof(a[0])) static const u_int8_t ciphermap[] = { HAL_CIPHER_WEP, /* IEEE80211_CIPHER_WEP */ HAL_CIPHER_TKIP, /* IEEE80211_CIPHER_TKIP */ HAL_CIPHER_AES_OCB, /* IEEE80211_CIPHER_AES_OCB */ HAL_CIPHER_AES_CCM, /* IEEE80211_CIPHER_AES_CCM */ (u_int8_t) -1, /* 4 is not allocated */ HAL_CIPHER_CKIP, /* IEEE80211_CIPHER_CKIP */ HAL_CIPHER_CLR, /* IEEE80211_CIPHER_NONE */ }; struct ath_hal *ah = sc->sc_ah; const struct ieee80211_cipher *cip = k->wk_cipher; HAL_KEYVAL hk; memset(&hk, 0, sizeof(hk)); /* * Software crypto uses a "clear key" so non-crypto * state kept in the key cache are maintained and * so that rx frames have an entry to match. */ if ((k->wk_flags & IEEE80211_KEY_SWCRYPT) == 0) { KASSERT(cip->ic_cipher < N(ciphermap), ("invalid cipher type %u", cip->ic_cipher)); hk.kv_type = ciphermap[cip->ic_cipher]; hk.kv_len = k->wk_keylen; memcpy(hk.kv_val, k->wk_key, k->wk_keylen); } else hk.kv_type = HAL_CIPHER_CLR; if (hk.kv_type == HAL_CIPHER_TKIP && (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic) { return ath_keyset_tkip(sc, k, &hk, mac); } else { KEYPRINTF(sc, k->wk_keyix, &hk, mac); return ath_hal_keyset(ah, k->wk_keyix, &hk, mac); } #undef N } /* * Fill the hardware key cache with key entries. */ static void ath_initkeytable(struct ath_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &sc->sc_if; struct ath_hal *ah = sc->sc_ah; const u_int8_t *bssid; int i; /* XXX maybe should reset all keys when !PRIVACY */ if (ic->ic_state == IEEE80211_S_SCAN) bssid = ifp->if_broadcastaddr; else bssid = ic->ic_bss->ni_bssid; for (i = 0; i < IEEE80211_WEP_NKID; i++) { struct ieee80211_key *k = &ic->ic_nw_keys[i]; if (k->wk_keylen == 0) { ath_hal_keyreset(ah, i); DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: reset key %u\n", __func__, i); } else { ath_keyset(sc, k, bssid); } } } /* * Allocate tx/rx key slots for TKIP. We allocate two slots for * each key, one for decrypt/encrypt and the other for the MIC. */ static u_int16_t key_alloc_2pair(struct ath_softc *sc) { #define N(a) (sizeof(a)/sizeof(a[0])) u_int i, keyix; KASSERT(sc->sc_splitmic, ("key cache !split")); /* XXX could optimize */ for (i = 0; i < N(sc->sc_keymap)/4; i++) { u_int8_t b = sc->sc_keymap[i]; if (b != 0xff) { /* * One or more slots in this byte are free. */ keyix = i*NBBY; while (b & 1) { again: keyix++; b >>= 1; } /* XXX IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV */ if (isset(sc->sc_keymap, keyix+32) || isset(sc->sc_keymap, keyix+64) || isset(sc->sc_keymap, keyix+32+64)) { /* full pair unavailable */ /* XXX statistic */ if (keyix == (i+1)*NBBY) { /* no slots were appropriate, advance */ continue; } goto again; } setbit(sc->sc_keymap, keyix); setbit(sc->sc_keymap, keyix+64); setbit(sc->sc_keymap, keyix+32); setbit(sc->sc_keymap, keyix+32+64); DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: key pair %u,%u %u,%u\n", __func__, keyix, keyix+64, keyix+32, keyix+32+64); return keyix; } } DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: out of pair space\n", __func__); return IEEE80211_KEYIX_NONE; #undef N } /* * Allocate a single key cache slot. */ static u_int16_t key_alloc_single(struct ath_softc *sc) { #define N(a) (sizeof(a)/sizeof(a[0])) u_int i, keyix; /* XXX try i,i+32,i+64,i+32+64 to minimize key pair conflicts */ for (i = 0; i < N(sc->sc_keymap); i++) { u_int8_t b = sc->sc_keymap[i]; if (b != 0xff) { /* * One or more slots are free. */ keyix = i*NBBY; while (b & 1) keyix++, b >>= 1; setbit(sc->sc_keymap, keyix); DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: key %u\n", __func__, keyix); return keyix; } } DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: out of space\n", __func__); return IEEE80211_KEYIX_NONE; #undef N } /* * Allocate one or more key cache slots for a uniacst key. The * key itself is needed only to identify the cipher. For hardware * TKIP with split cipher+MIC keys we allocate two key cache slot * pairs so that we can setup separate TX and RX MIC keys. Note * that the MIC key for a TKIP key at slot i is assumed by the * hardware to be at slot i+64. This limits TKIP keys to the first * 64 entries. */ static int ath_key_alloc(struct ieee80211com *ic, const struct ieee80211_key *k) { struct ath_softc *sc = ic->ic_ifp->if_softc; /* * We allocate two pair for TKIP when using the h/w to do * the MIC. For everything else, including software crypto, * we allocate a single entry. Note that s/w crypto requires * a pass-through slot on the 5211 and 5212. The 5210 does * not support pass-through cache entries and we map all * those requests to slot 0. */ if (k->wk_flags & IEEE80211_KEY_SWCRYPT) { return key_alloc_single(sc); } else if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP && (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic) { return key_alloc_2pair(sc); } else { return key_alloc_single(sc); } } /* * Delete an entry in the key cache allocated by ath_key_alloc. */ static int ath_key_delete(struct ieee80211com *ic, const struct ieee80211_key *k) { struct ath_softc *sc = ic->ic_ifp->if_softc; struct ath_hal *ah = sc->sc_ah; const struct ieee80211_cipher *cip = k->wk_cipher; u_int keyix = k->wk_keyix; DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: delete key %u\n", __func__, keyix); ath_hal_keyreset(ah, keyix); /* * Handle split tx/rx keying required for TKIP with h/w MIC. */ if (cip->ic_cipher == IEEE80211_CIPHER_TKIP && (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic) ath_hal_keyreset(ah, keyix+32); /* RX key */ if (keyix >= IEEE80211_WEP_NKID) { /* * Don't touch keymap entries for global keys so * they are never considered for dynamic allocation. */ clrbit(sc->sc_keymap, keyix); if (cip->ic_cipher == IEEE80211_CIPHER_TKIP && (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic) { clrbit(sc->sc_keymap, keyix+64); /* TX key MIC */ clrbit(sc->sc_keymap, keyix+32); /* RX key */ clrbit(sc->sc_keymap, keyix+32+64); /* RX key MIC */ } } return 1; } /* * Set the key cache contents for the specified key. Key cache * slot(s) must already have been allocated by ath_key_alloc. */ static int ath_key_set(struct ieee80211com *ic, const struct ieee80211_key *k, const u_int8_t mac[IEEE80211_ADDR_LEN]) { struct ath_softc *sc = ic->ic_ifp->if_softc; return ath_keyset(sc, k, mac); } /* * Block/unblock tx+rx processing while a key change is done. * We assume the caller serializes key management operations * so we only need to worry about synchronization with other * uses that originate in the driver. */ static void ath_key_update_begin(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; struct ath_softc *sc = ifp->if_softc; DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s:\n", __func__); #if 0 tasklet_disable(&sc->sc_rxtq); #endif IF_LOCK(&ifp->if_snd); /* NB: doesn't block mgmt frames */ } static void ath_key_update_end(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; struct ath_softc *sc = ifp->if_softc; DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s:\n", __func__); IF_UNLOCK(&ifp->if_snd); #if 0 tasklet_enable(&sc->sc_rxtq); #endif } /* * Calculate the receive filter according to the * operating mode and state: * * o always accept unicast, broadcast, and multicast traffic * o maintain current state of phy error reception (the hal * may enable phy error frames for noise immunity work) * o probe request frames are accepted only when operating in * hostap, adhoc, or monitor modes * o enable promiscuous mode according to the interface state * o accept beacons: * - when operating in adhoc mode so the 802.11 layer creates * node table entries for peers, * - when operating in station mode for collecting rssi data when * the station is otherwise quiet, or * - when scanning */ static u_int32_t ath_calcrxfilter(struct ath_softc *sc, enum ieee80211_state state) { struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; struct ifnet *ifp = &sc->sc_if; u_int32_t rfilt; rfilt = (ath_hal_getrxfilter(ah) & HAL_RX_FILTER_PHYERR) | HAL_RX_FILTER_UCAST | HAL_RX_FILTER_BCAST | HAL_RX_FILTER_MCAST; if (ic->ic_opmode != IEEE80211_M_STA) rfilt |= HAL_RX_FILTER_PROBEREQ; if (ic->ic_opmode != IEEE80211_M_HOSTAP && (ifp->if_flags & IFF_PROMISC)) rfilt |= HAL_RX_FILTER_PROM; if (ic->ic_opmode == IEEE80211_M_STA || ic->ic_opmode == IEEE80211_M_IBSS || state == IEEE80211_S_SCAN) rfilt |= HAL_RX_FILTER_BEACON; return rfilt; } static void ath_mode_init(struct ath_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; struct ifnet *ifp = &sc->sc_if; u_int32_t rfilt, mfilt[2], val; u_int8_t pos; struct ifmultiaddr *ifma; /* configure rx filter */ rfilt = ath_calcrxfilter(sc, ic->ic_state); ath_hal_setrxfilter(ah, rfilt); /* configure operational mode */ ath_hal_setopmode(ah); /* * Handle any link-level address change. Note that we only * need to force ic_myaddr; any other addresses are handled * as a byproduct of the ifnet code marking the interface * down then up. * * XXX should get from lladdr instead of arpcom but that's more work */ IEEE80211_ADDR_COPY(ic->ic_myaddr, IFP2AC(ifp)->ac_enaddr); ath_hal_setmac(ah, ic->ic_myaddr); /* calculate and install multicast filter */ if ((ifp->if_flags & IFF_ALLMULTI) == 0) { mfilt[0] = mfilt[1] = 0; TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { caddr_t dl; /* calculate XOR of eight 6bit values */ dl = LLADDR((struct sockaddr_dl *) ifma->ifma_addr); val = LE_READ_4(dl + 0); pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; val = LE_READ_4(dl + 3); pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; pos &= 0x3f; mfilt[pos / 32] |= (1 << (pos % 32)); } } else { mfilt[0] = mfilt[1] = ~0; } ath_hal_setmcastfilter(ah, mfilt[0], mfilt[1]); DPRINTF(sc, ATH_DEBUG_MODE, "%s: RX filter 0x%x, MC filter %08x:%08x\n", __func__, rfilt, mfilt[0], mfilt[1]); } static void ath_mbuf_load_cb(void *arg, bus_dma_segment_t *seg, int nseg, bus_size_t mapsize, int error) { struct ath_buf *bf = arg; KASSERT(nseg <= ATH_MAX_SCATTER, ("%s: too many DMA segments %u", __func__, nseg)); KASSERT(error == 0, ("%s: error %u on bus_dma callback", __func__, error)); bf->bf_mapsize = mapsize; bf->bf_nseg = nseg; bcopy(seg, bf->bf_segs, nseg * sizeof (seg[0])); } /* * Set the slot time based on the current setting. */ static void ath_setslottime(struct ath_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; if (ic->ic_flags & IEEE80211_F_SHSLOT) ath_hal_setslottime(ah, HAL_SLOT_TIME_9); else ath_hal_setslottime(ah, HAL_SLOT_TIME_20); sc->sc_updateslot = OK; } /* * Callback from the 802.11 layer to update the * slot time based on the current setting. */ static void ath_updateslot(struct ifnet *ifp) { struct ath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; /* * When not coordinating the BSS, change the hardware * immediately. For other operation we defer the change * until beacon updates have propagated to the stations. */ if (ic->ic_opmode == IEEE80211_M_HOSTAP) sc->sc_updateslot = UPDATE; else ath_setslottime(sc); } /* * Allocate and setup an initial beacon frame. */ static int ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ath_buf *bf; struct mbuf *m; int error; bf = STAILQ_FIRST(&sc->sc_bbuf); if (bf == NULL) { DPRINTF(sc, ATH_DEBUG_BEACON, "%s: no dma buffers\n", __func__); sc->sc_stats.ast_be_nombuf++; /* XXX */ return ENOMEM; /* XXX */ } if (bf->bf_m != NULL) { bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); m_freem(bf->bf_m); bf->bf_m = NULL; bf->bf_node = NULL; } /* * NB: the beacon data buffer must be 32-bit aligned; * we assume the mbuf routines will return us something * with this alignment (perhaps should assert). */ m = ieee80211_beacon_alloc(ic, ni, &sc->sc_boff); if (m == NULL) { DPRINTF(sc, ATH_DEBUG_BEACON, "%s: cannot get mbuf\n", __func__); sc->sc_stats.ast_be_nombuf++; return ENOMEM; } error = bus_dmamap_load_mbuf(sc->sc_dmat, bf->bf_dmamap, m, ath_mbuf_load_cb, bf, BUS_DMA_NOWAIT); if (error == 0) { bf->bf_m = m; bf->bf_node = ni; /* NB: no held reference */ } else { m_freem(m); } return error; } /* * Setup the beacon frame for transmit. */ static void ath_beacon_setup(struct ath_softc *sc, struct ath_buf *bf) { #define USE_SHPREAMBLE(_ic) \ (((_ic)->ic_flags & (IEEE80211_F_SHPREAMBLE | IEEE80211_F_USEBARKER))\ == IEEE80211_F_SHPREAMBLE) struct ieee80211_node *ni = bf->bf_node; struct ieee80211com *ic = ni->ni_ic; struct mbuf *m = bf->bf_m; struct ath_hal *ah = sc->sc_ah; struct ath_node *an = ATH_NODE(ni); struct ath_desc *ds; int flags, antenna; u_int8_t rate; DPRINTF(sc, ATH_DEBUG_BEACON, "%s: m %p len %u\n", __func__, m, m->m_len); /* setup descriptors */ ds = bf->bf_desc; flags = HAL_TXDESC_NOACK; if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) { ds->ds_link = bf->bf_daddr; /* self-linked */ flags |= HAL_TXDESC_VEOL; /* * Let hardware handle antenna switching. */ antenna = 0; } else { ds->ds_link = 0; /* * Switch antenna every 4 beacons. * XXX assumes two antenna */ antenna = (sc->sc_stats.ast_be_xmit & 4 ? 2 : 1); } KASSERT(bf->bf_nseg == 1, ("multi-segment beacon frame; nseg %u", bf->bf_nseg)); ds->ds_data = bf->bf_segs[0].ds_addr; /* * Calculate rate code. * XXX everything at min xmit rate */ if (USE_SHPREAMBLE(ic)) rate = an->an_tx_mgtratesp; else rate = an->an_tx_mgtrate; ath_hal_setuptxdesc(ah, ds , m->m_len + IEEE80211_CRC_LEN /* frame length */ , sizeof(struct ieee80211_frame)/* header length */ , HAL_PKT_TYPE_BEACON /* Atheros packet type */ , ni->ni_txpower /* txpower XXX */ , rate, 1 /* series 0 rate/tries */ , HAL_TXKEYIX_INVALID /* no encryption */ , antenna /* antenna mode */ , flags /* no ack, veol for beacons */ , 0 /* rts/cts rate */ , 0 /* rts/cts duration */ ); /* NB: beacon's BufLen must be a multiple of 4 bytes */ ath_hal_filltxdesc(ah, ds , roundup(m->m_len, 4) /* buffer length */ , AH_TRUE /* first segment */ , AH_TRUE /* last segment */ , ds /* first descriptor */ ); #undef USE_SHPREAMBLE } /* * Transmit a beacon frame at SWBA. Dynamic updates to the * frame contents are done as needed and the slot time is * also adjusted based on current state. */ static void ath_beacon_proc(void *arg, int pending) { struct ath_softc *sc = arg; struct ath_buf *bf = STAILQ_FIRST(&sc->sc_bbuf); struct ieee80211_node *ni = bf->bf_node; struct ieee80211com *ic = ni->ni_ic; struct ath_hal *ah = sc->sc_ah; struct mbuf *m; int ncabq, error, otherant; DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: pending %u\n", __func__, pending); if (ic->ic_opmode == IEEE80211_M_STA || ic->ic_opmode == IEEE80211_M_MONITOR || bf == NULL || bf->bf_m == NULL) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: ic_flags=%x bf=%p bf_m=%p\n", __func__, ic->ic_flags, bf, bf ? bf->bf_m : NULL); return; } /* * Check if the previous beacon has gone out. If * not don't don't try to post another, skip this * period and wait for the next. Missed beacons * indicate a problem and should not occur. If we * miss too many consecutive beacons reset the device. */ if (ath_hal_numtxpending(ah, sc->sc_bhalq) != 0) { sc->sc_bmisscount++; DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: missed %u consecutive beacons\n", __func__, sc->sc_bmisscount); if (sc->sc_bmisscount > 3) /* NB: 3 is a guess */ taskqueue_enqueue(taskqueue_swi, &sc->sc_bstucktask); return; } if (sc->sc_bmisscount != 0) { DPRINTF(sc, ATH_DEBUG_BEACON, "%s: resume beacon xmit after %u misses\n", __func__, sc->sc_bmisscount); sc->sc_bmisscount = 0; } /* * Update dynamic beacon contents. If this returns * non-zero then we need to remap the memory because * the beacon frame changed size (probably because * of the TIM bitmap). */ m = bf->bf_m; ncabq = ath_hal_numtxpending(ah, sc->sc_cabq->axq_qnum); if (ieee80211_beacon_update(ic, bf->bf_node, &sc->sc_boff, m, ncabq)) { /* XXX too conservative? */ bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); error = bus_dmamap_load_mbuf(sc->sc_dmat, bf->bf_dmamap, m, ath_mbuf_load_cb, bf, BUS_DMA_NOWAIT); if (error != 0) { if_printf(ic->ic_ifp, "%s: bus_dmamap_load_mbuf failed, error %u\n", __func__, error); return; } } /* * Handle slot time change when a non-ERP station joins/leaves * an 11g network. The 802.11 layer notifies us via callback, * we mark updateslot, then wait one beacon before effecting * the change. This gives associated stations at least one * beacon interval to note the state change. */ /* XXX locking */ if (sc->sc_updateslot == UPDATE) sc->sc_updateslot = COMMIT; /* commit next beacon */ else if (sc->sc_updateslot == COMMIT) ath_setslottime(sc); /* commit change to h/w */ /* * Check recent per-antenna transmit statistics and flip * the default antenna if noticeably more frames went out * on the non-default antenna. * XXX assumes 2 anntenae */ otherant = sc->sc_defant & 1 ? 2 : 1; if (sc->sc_ant_tx[otherant] > sc->sc_ant_tx[sc->sc_defant] + 2) ath_setdefantenna(sc, otherant); sc->sc_ant_tx[1] = sc->sc_ant_tx[2] = 0; /* * Construct tx descriptor. */ ath_beacon_setup(sc, bf); /* * Stop any current dma and put the new frame on the queue. * This should never fail since we check above that no frames * are still pending on the queue. */ if (!ath_hal_stoptxdma(ah, sc->sc_bhalq)) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: beacon queue %u did not stop?\n", __func__, sc->sc_bhalq); } bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); /* * Enable the CAB queue before the beacon queue to * insure cab frames are triggered by this beacon. */ if (sc->sc_boff.bo_tim[4] & 1) /* NB: only at DTIM */ ath_hal_txstart(ah, sc->sc_cabq->axq_qnum); ath_hal_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr); ath_hal_txstart(ah, sc->sc_bhalq); DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: TXDP[%u] = %p (%p)\n", __func__, sc->sc_bhalq, (caddr_t)bf->bf_daddr, bf->bf_desc); sc->sc_stats.ast_be_xmit++; } /* * Reset the hardware after detecting beacons have stopped. */ static void ath_bstuck_proc(void *arg, int pending) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; if_printf(ifp, "stuck beacon; resetting (bmiss count %u)\n", sc->sc_bmisscount); ath_reset(ifp); } /* * Reclaim beacon resources. */ static void ath_beacon_free(struct ath_softc *sc) { struct ath_buf *bf; STAILQ_FOREACH(bf, &sc->sc_bbuf, bf_list) if (bf->bf_m != NULL) { bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); m_freem(bf->bf_m); bf->bf_m = NULL; bf->bf_node = NULL; } } /* * Configure the beacon and sleep timers. * * When operating as an AP this resets the TSF and sets * up the hardware to notify us when we need to issue beacons. * * When operating in station mode this sets up the beacon * timers according to the timestamp of the last received * beacon and the current TSF, configures PCF and DTIM * handling, programs the sleep registers so the hardware * will wakeup in time to receive beacons, and configures * the beacon miss handling so we'll receive a BMISS * interrupt when we stop seeing beacons from the AP * we've associated with. */ static void ath_beacon_config(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_node *ni = ic->ic_bss; u_int32_t nexttbtt, intval; nexttbtt = (LE_READ_4(ni->ni_tstamp.data + 4) << 22) | (LE_READ_4(ni->ni_tstamp.data) >> 10); DPRINTF(sc, ATH_DEBUG_BEACON, "%s: nexttbtt %u intval %u\n", __func__, nexttbtt, ni->ni_intval); nexttbtt += ni->ni_intval; intval = ni->ni_intval & HAL_BEACON_PERIOD; if (ic->ic_opmode == IEEE80211_M_STA) { HAL_BEACON_STATE bs; u_int32_t bmisstime; /* NB: no PCF support right now */ memset(&bs, 0, sizeof(bs)); /* * Reset our tsf so the hardware will update the * tsf register to reflect timestamps found in * received beacons. */ bs.bs_intval = intval | HAL_BEACON_RESET_TSF; bs.bs_nexttbtt = nexttbtt; bs.bs_dtimperiod = bs.bs_intval; bs.bs_nextdtim = nexttbtt; /* * The 802.11 layer records the offset to the DTIM * bitmap while receiving beacons; use it here to * enable h/w detection of our AID being marked in * the bitmap vector (to indicate frames for us are * pending at the AP). */ bs.bs_timoffset = ni->ni_timoff; /* * Calculate the number of consecutive beacons to miss * before taking a BMISS interrupt. The configuration * is specified in ms, so we need to convert that to * TU's and then calculate based on the beacon interval. * Note that we clamp the result to at most 10 beacons. */ bmisstime = (ic->ic_bmisstimeout * 1000) / 1024; bs.bs_bmissthreshold = howmany(bmisstime,ni->ni_intval); if (bs.bs_bmissthreshold > 10) bs.bs_bmissthreshold = 10; else if (bs.bs_bmissthreshold <= 0) bs.bs_bmissthreshold = 1; /* * Calculate sleep duration. The configuration is * given in ms. We insure a multiple of the beacon * period is used. Also, if the sleep duration is * greater than the DTIM period then it makes senses * to make it a multiple of that. * * XXX fixed at 100ms */ bs.bs_sleepduration = roundup((100 * 1000) / 1024, bs.bs_intval); if (bs.bs_sleepduration > bs.bs_dtimperiod) bs.bs_sleepduration = roundup(bs.bs_sleepduration, bs.bs_dtimperiod); DPRINTF(sc, ATH_DEBUG_BEACON, "%s: intval %u nexttbtt %u dtim %u nextdtim %u bmiss %u sleep %u cfp:period %u maxdur %u next %u timoffset %u\n" , __func__ , bs.bs_intval , bs.bs_nexttbtt , bs.bs_dtimperiod , bs.bs_nextdtim , bs.bs_bmissthreshold , bs.bs_sleepduration , bs.bs_cfpperiod , bs.bs_cfpmaxduration , bs.bs_cfpnext , bs.bs_timoffset ); ath_hal_intrset(ah, 0); ath_hal_beacontimers(ah, &bs); sc->sc_imask |= HAL_INT_BMISS; ath_hal_intrset(ah, sc->sc_imask); } else { ath_hal_intrset(ah, 0); if (nexttbtt == ni->ni_intval) intval |= HAL_BEACON_RESET_TSF; if (ic->ic_opmode == IEEE80211_M_IBSS) { /* * In IBSS mode enable the beacon timers but only * enable SWBA interrupts if we need to manually * prepare beacon frames. Otherwise we use a * self-linked tx descriptor and let the hardware * deal with things. */ intval |= HAL_BEACON_ENA; if (!sc->sc_hasveol) sc->sc_imask |= HAL_INT_SWBA; } else if (ic->ic_opmode == IEEE80211_M_HOSTAP) { /* * In AP mode we enable the beacon timers and * SWBA interrupts to prepare beacon frames. */ intval |= HAL_BEACON_ENA; sc->sc_imask |= HAL_INT_SWBA; /* beacon prepare */ } ath_hal_beaconinit(ah, nexttbtt, intval); sc->sc_bmisscount = 0; ath_hal_intrset(ah, sc->sc_imask); /* * When using a self-linked beacon descriptor in * ibss mode load it once here. */ if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) ath_beacon_proc(sc, 0); } } static void ath_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { bus_addr_t *paddr = (bus_addr_t*) arg; KASSERT(error == 0, ("%s: error %u on bus_dma callback", __func__, error)); *paddr = segs->ds_addr; } static int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, ath_bufhead *head, const char *name, int nbuf, int ndesc) { #define DS2PHYS(_dd, _ds) \ ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) struct ifnet *ifp = &sc->sc_if; struct ath_desc *ds; struct ath_buf *bf; int i, bsize, error; DPRINTF(sc, ATH_DEBUG_RESET, "%s: %s DMA: %u buffers %u desc/buf\n", __func__, name, nbuf, ndesc); dd->dd_name = name; dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; /* * Setup DMA descriptor area. */ error = bus_dma_tag_create(NULL, /* parent */ PAGE_SIZE, 0, /* alignment, bounds */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ dd->dd_desc_len, /* maxsize */ 1, /* nsegments */ BUS_SPACE_MAXADDR, /* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ NULL, /* lockfunc */ NULL, /* lockarg */ &dd->dd_dmat); if (error != 0) { if_printf(ifp, "cannot allocate %s DMA tag\n", dd->dd_name); return error; } /* allocate descriptors */ error = bus_dmamap_create(dd->dd_dmat, BUS_DMA_NOWAIT, &dd->dd_dmamap); if (error != 0) { if_printf(ifp, "unable to create dmamap for %s descriptors, " "error %u\n", dd->dd_name, error); goto fail0; } error = bus_dmamem_alloc(dd->dd_dmat, (void**) &dd->dd_desc, BUS_DMA_NOWAIT, &dd->dd_dmamap); if (error != 0) { if_printf(ifp, "unable to alloc memory for %u %s descriptors, " "error %u\n", nbuf * ndesc, dd->dd_name, error); goto fail1; } error = bus_dmamap_load(dd->dd_dmat, dd->dd_dmamap, dd->dd_desc, dd->dd_desc_len, ath_load_cb, &dd->dd_desc_paddr, BUS_DMA_NOWAIT); if (error != 0) { if_printf(ifp, "unable to map %s descriptors, error %u\n", dd->dd_name, error); goto fail2; } ds = dd->dd_desc; DPRINTF(sc, ATH_DEBUG_RESET, "%s: %s DMA map: %p (%lu) -> %p (%lu)\n", __func__, dd->dd_name, ds, (u_long) dd->dd_desc_len, (caddr_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len); /* allocate rx buffers */ bsize = sizeof(struct ath_buf) * nbuf; bf = malloc(bsize, M_ATHDEV, M_NOWAIT | M_ZERO); if (bf == NULL) { if_printf(ifp, "malloc of %s buffers failed, size %u\n", dd->dd_name, bsize); goto fail3; } dd->dd_bufptr = bf; STAILQ_INIT(head); for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { bf->bf_desc = ds; bf->bf_daddr = DS2PHYS(dd, ds); error = bus_dmamap_create(sc->sc_dmat, BUS_DMA_NOWAIT, &bf->bf_dmamap); if (error != 0) { if_printf(ifp, "unable to create dmamap for %s " "buffer %u, error %u\n", dd->dd_name, i, error); ath_descdma_cleanup(sc, dd, head); return error; } STAILQ_INSERT_TAIL(head, bf, bf_list); } return 0; fail3: bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); fail2: bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); fail1: bus_dmamap_destroy(dd->dd_dmat, dd->dd_dmamap); fail0: bus_dma_tag_destroy(dd->dd_dmat); memset(dd, 0, sizeof(*dd)); return error; #undef DS2PHYS } static void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd, ath_bufhead *head) { struct ath_buf *bf; struct ieee80211_node *ni; bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); bus_dmamap_destroy(dd->dd_dmat, dd->dd_dmamap); bus_dma_tag_destroy(dd->dd_dmat); STAILQ_FOREACH(bf, head, bf_list) { if (bf->bf_m) { m_freem(bf->bf_m); bf->bf_m = NULL; } if (bf->bf_dmamap != NULL) { bus_dmamap_destroy(sc->sc_dmat, bf->bf_dmamap); bf->bf_dmamap = NULL; } ni = bf->bf_node; bf->bf_node = NULL; if (ni != NULL) { /* * Reclaim node reference. */ ieee80211_free_node(ni); } } STAILQ_INIT(head); free(dd->dd_bufptr, M_ATHDEV); memset(dd, 0, sizeof(*dd)); } static int ath_desc_alloc(struct ath_softc *sc) { int error; error = ath_descdma_setup(sc, &sc->sc_rxdma, &sc->sc_rxbuf, "rx", ATH_RXBUF, 1); if (error != 0) return error; error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf, "tx", ATH_TXBUF, ATH_TXDESC); if (error != 0) { ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); return error; } error = ath_descdma_setup(sc, &sc->sc_bdma, &sc->sc_bbuf, "beacon", 1, 1); if (error != 0) { ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); return error; } return 0; } static void ath_desc_free(struct ath_softc *sc) { if (sc->sc_bdma.dd_desc_len != 0) ath_descdma_cleanup(sc, &sc->sc_bdma, &sc->sc_bbuf); if (sc->sc_txdma.dd_desc_len != 0) ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); if (sc->sc_rxdma.dd_desc_len != 0) ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); } static struct ieee80211_node * ath_node_alloc(struct ieee80211_node_table *nt) { struct ieee80211com *ic = nt->nt_ic; struct ath_softc *sc = ic->ic_ifp->if_softc; const size_t space = sizeof(struct ath_node) + sc->sc_rc->arc_space; struct ath_node *an; an = malloc(space, M_80211_NODE, M_NOWAIT|M_ZERO); if (an == NULL) { /* XXX stat+msg */ return NULL; } an->an_avgrssi = ATH_RSSI_DUMMY_MARKER; an->an_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; an->an_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; an->an_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; ath_rate_node_init(sc, an); DPRINTF(sc, ATH_DEBUG_NODE, "%s: an %p\n", __func__, an); return &an->an_node; } /* * Clear any references to a node in a transmit queue. * This happens when the node is cleaned so we don't * need to worry about the reference count going to zero; * we just reclaim the reference w/o dropping the txq lock. * Then we null the pointer and the right thing happens * when the buffer is cleaned in ath_tx_processq. */ static void ath_tx_cleanq(struct ieee80211com *ic, struct ath_txq *txq, struct ieee80211_node *ni) { struct ath_buf *bf; ATH_TXQ_LOCK(txq); STAILQ_FOREACH(bf, &txq->axq_q, bf_list) { if (bf->bf_node == ni) { /* NB: this clears the pointer too */ ieee80211_unref_node(&bf->bf_node); } } ATH_TXQ_UNLOCK(txq); } static void ath_node_free(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ath_softc *sc = ic->ic_ifp->if_softc; int i; DPRINTF(sc, ATH_DEBUG_NODE, "%s: ni %p\n", __func__, ni); /* XXX can this happen since refcnt must be zero for us to be called? */ for (i = 0; i < HAL_NUM_TX_QUEUES; i++) if (ATH_TXQ_SETUP(sc, i)) ath_tx_cleanq(ic, &sc->sc_txq[i], ni); ath_rate_node_cleanup(sc, ATH_NODE(ni)); sc->sc_node_free(ni); } static u_int8_t ath_node_getrssi(const struct ieee80211_node *ni) { #define HAL_EP_RND(x, mul) \ ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) u_int32_t avgrssi = ATH_NODE_CONST(ni)->an_avgrssi; int32_t rssi; /* * When only one frame is received there will be no state in * avgrssi so fallback on the value recorded by the 802.11 layer. */ if (avgrssi != ATH_RSSI_DUMMY_MARKER) rssi = HAL_EP_RND(avgrssi, HAL_RSSI_EP_MULTIPLIER); else rssi = ni->ni_rssi; /* NB: theoretically we shouldn't need this, but be paranoid */ return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; #undef HAL_EP_RND } static int ath_rxbuf_init(struct ath_softc *sc, struct ath_buf *bf) { struct ath_hal *ah = sc->sc_ah; int error; struct mbuf *m; struct ath_desc *ds; m = bf->bf_m; if (m == NULL) { /* * NB: by assigning a page to the rx dma buffer we * implicitly satisfy the Atheros requirement that * this buffer be cache-line-aligned and sized to be * multiple of the cache line size. Not doing this * causes weird stuff to happen (for the 5210 at least). */ m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); if (m == NULL) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: no mbuf/cluster\n", __func__); sc->sc_stats.ast_rx_nombuf++; return ENOMEM; } KASSERT(m->m_next == NULL, ("m_next %p (1)", m->m_next)); bf->bf_m = m; m->m_pkthdr.len = m->m_len = m->m_ext.ext_size; error = bus_dmamap_load_mbuf(sc->sc_dmat, bf->bf_dmamap, m, ath_mbuf_load_cb, bf, BUS_DMA_NOWAIT); if (error != 0) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: bus_dmamap_load_mbuf failed; error %d\n", __func__, error); sc->sc_stats.ast_rx_busdma++; return error; } KASSERT(bf->bf_nseg == 1, ("%s: multi-segment packet; nseg %u", __func__, bf->bf_nseg)); } bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREREAD); /* * Setup descriptors. For receive we always terminate * the descriptor list with a self-linked entry so we'll * not get overrun under high load (as can happen with a * 5212 when ANI processing enables PHY error frames). * * To insure the last descriptor is self-linked we create * each descriptor as self-linked and add it to the end. As * each additional descriptor is added the previous self-linked * entry is ``fixed'' naturally. This should be safe even * if DMA is happening. When processing RX interrupts we * never remove/process the last, self-linked, entry on the * descriptor list. This insures the hardware always has * someplace to write a new frame. */ ds = bf->bf_desc; ds->ds_link = bf->bf_daddr; /* link to self */ ds->ds_data = bf->bf_segs[0].ds_addr; ath_hal_setuprxdesc(ah, ds , m->m_len /* buffer size */ , 0 ); if (sc->sc_rxlink != NULL) *sc->sc_rxlink = bf->bf_daddr; sc->sc_rxlink = &ds->ds_link; return 0; } /* * Intercept management frames to collect beacon rssi data * and to do ibss merges. */ static void ath_recv_mgmt(struct ieee80211com *ic, struct mbuf *m, struct ieee80211_node *ni, int subtype, int rssi, u_int32_t rstamp) { struct ath_softc *sc = ic->ic_ifp->if_softc; /* * Call up first so subsequent work can use information * potentially stored in the node (e.g. for ibss merge). */ sc->sc_recv_mgmt(ic, m, ni, subtype, rssi, rstamp); switch (subtype) { case IEEE80211_FC0_SUBTYPE_BEACON: /* update rssi statistics for use by the hal */ ATH_RSSI_LPF(ATH_NODE(ni)->an_halstats.ns_avgbrssi, rssi); /* fall thru... */ case IEEE80211_FC0_SUBTYPE_PROBE_RESP: if (ic->ic_opmode == IEEE80211_M_IBSS && ic->ic_state == IEEE80211_S_RUN) { struct ath_hal *ah = sc->sc_ah; /* XXX extend rstamp */ u_int64_t tsf = ath_hal_gettsf64(ah); /* * Handle ibss merge as needed; check the tsf on the * frame before attempting the merge. The 802.11 spec * says the station should change it's bssid to match * the oldest station with the same ssid, where oldest * is determined by the tsf. */ if (le64toh(ni->ni_tstamp.tsf) >= tsf && ieee80211_ibss_merge(ic, ni)) ath_hal_setassocid(ah, ic->ic_bss->ni_bssid, 0); } break; } } /* * Set the default antenna. */ static void ath_setdefantenna(struct ath_softc *sc, u_int antenna) { struct ath_hal *ah = sc->sc_ah; /* XXX block beacon interrupts */ ath_hal_setdefantenna(ah, antenna); if (sc->sc_defant != antenna) sc->sc_stats.ast_ant_defswitch++; sc->sc_defant = antenna; sc->sc_rxotherant = 0; } static void ath_rx_proc(void *arg, int npending) { #define PA2DESC(_sc, _pa) \ ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) struct ath_softc *sc = arg; struct ath_buf *bf; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &sc->sc_if; struct ath_hal *ah = sc->sc_ah; struct ath_desc *ds; struct mbuf *m; struct ieee80211_node *ni; struct ath_node *an; int len; u_int phyerr; HAL_STATUS status; NET_LOCK_GIANT(); /* XXX */ DPRINTF(sc, ATH_DEBUG_RX_PROC, "%s: pending %u\n", __func__, npending); do { bf = STAILQ_FIRST(&sc->sc_rxbuf); if (bf == NULL) { /* NB: shouldn't happen */ if_printf(ifp, "%s: no buffer!\n", __func__); break; } ds = bf->bf_desc; if (ds->ds_link == bf->bf_daddr) { /* NB: never process the self-linked entry at the end */ break; } m = bf->bf_m; if (m == NULL) { /* NB: shouldn't happen */ if_printf(ifp, "%s: no mbuf!\n", __func__); continue; } /* XXX sync descriptor memory */ /* * Must provide the virtual address of the current * descriptor, the physical address, and the virtual * address of the next descriptor in the h/w chain. * This allows the HAL to look ahead to see if the * hardware is done with a descriptor by checking the * done bit in the following descriptor and the address * of the current descriptor the DMA engine is working * on. All this is necessary because of our use of * a self-linked list to avoid rx overruns. */ status = ath_hal_rxprocdesc(ah, ds, bf->bf_daddr, PA2DESC(sc, ds->ds_link)); #ifdef AR_DEBUG if (sc->sc_debug & ATH_DEBUG_RECV_DESC) ath_printrxbuf(bf, status == HAL_OK); #endif if (status == HAL_EINPROGRESS) break; STAILQ_REMOVE_HEAD(&sc->sc_rxbuf, bf_list); if (ds->ds_rxstat.rs_more) { /* * Frame spans multiple descriptors; this * cannot happen yet as we don't support * jumbograms. If not in monitor mode, * discard the frame. */ if (ic->ic_opmode != IEEE80211_M_MONITOR) { sc->sc_stats.ast_rx_toobig++; goto rx_next; } /* fall thru for monitor mode handling... */ } else if (ds->ds_rxstat.rs_status != 0) { if (ds->ds_rxstat.rs_status & HAL_RXERR_CRC) sc->sc_stats.ast_rx_crcerr++; if (ds->ds_rxstat.rs_status & HAL_RXERR_FIFO) sc->sc_stats.ast_rx_fifoerr++; if (ds->ds_rxstat.rs_status & HAL_RXERR_PHY) { sc->sc_stats.ast_rx_phyerr++; phyerr = ds->ds_rxstat.rs_phyerr & 0x1f; sc->sc_stats.ast_rx_phy[phyerr]++; goto rx_next; } if (ds->ds_rxstat.rs_status & HAL_RXERR_DECRYPT) { /* * Decrypt error. If the error occurred * because there was no hardware key, then * let the frame through so the upper layers * can process it. This is necessary for 5210 * parts which have no way to setup a ``clear'' * key cache entry. * * XXX do key cache faulting */ if (ds->ds_rxstat.rs_keyix == HAL_RXKEYIX_INVALID) goto rx_accept; sc->sc_stats.ast_rx_badcrypt++; } if (ds->ds_rxstat.rs_status & HAL_RXERR_MIC) { sc->sc_stats.ast_rx_badmic++; /* * Do minimal work required to hand off * the 802.11 header for notifcation. */ /* XXX frag's and qos frames */ len = ds->ds_rxstat.rs_datalen; if (len >= sizeof (struct ieee80211_frame)) { bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_POSTREAD); ieee80211_notify_michael_failure(ic, mtod(m, struct ieee80211_frame *), ds->ds_rxstat.rs_keyix); } } ifp->if_ierrors++; /* * Reject error frames, we normally don't want * to see them in monitor mode (in monitor mode * allow through packets that have crypto problems). */ if ((ds->ds_rxstat.rs_status &~ (HAL_RXERR_DECRYPT|HAL_RXERR_MIC)) || sc->sc_ic.ic_opmode != IEEE80211_M_MONITOR) goto rx_next; } rx_accept: KASSERT(m->m_next == NULL, ("m_next %p (3)", m->m_next)); /* * Sync and unmap the frame. At this point we're * committed to passing the mbuf somewhere so clear * bf_m; this means a new sk_buff must be allocated * when the rx descriptor is setup again to receive * another frame. */ bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); bf->bf_m = NULL; m->m_pkthdr.rcvif = ifp; len = ds->ds_rxstat.rs_datalen; m->m_pkthdr.len = m->m_len = len; if (sc->sc_softled) ath_update_led(sc); sc->sc_stats.ast_ant_rx[ds->ds_rxstat.rs_antenna]++; if (sc->sc_drvbpf) { /* * Discard anything shorter than an ack or cts. */ if (len < IEEE80211_ACK_LEN) { DPRINTF(sc, ATH_DEBUG_RECV, "%s: runt packet %d\n", __func__, len); sc->sc_stats.ast_rx_tooshort++; m_freem(m); goto rx_next; } sc->sc_rx_th.wr_rate = sc->sc_hwmap[ds->ds_rxstat.rs_rate]; sc->sc_rx_th.wr_antsignal = ds->ds_rxstat.rs_rssi; sc->sc_rx_th.wr_antenna = ds->ds_rxstat.rs_antenna; /* XXX TSF */ bpf_mtap2(sc->sc_drvbpf, &sc->sc_rx_th, sc->sc_rx_th_len, m); } /* * From this point on we assume the frame is at least * as large as ieee80211_frame_min; verify that. */ if (len < IEEE80211_MIN_LEN) { DPRINTF(sc, ATH_DEBUG_RECV, "%s: short packet %d\n", __func__, len); sc->sc_stats.ast_rx_tooshort++; m_freem(m); goto rx_next; } if (IFF_DUMPPKTS(sc, ATH_DEBUG_RECV)) { ieee80211_dump_pkt(mtod(m, caddr_t), len, sc->sc_hwmap[ds->ds_rxstat.rs_rate], ds->ds_rxstat.rs_rssi); } m_adj(m, -IEEE80211_CRC_LEN); /* * Locate the node for sender, track state, and then * pass the (referenced) node up to the 802.11 layer * for its use. */ ni = ieee80211_find_rxnode(ic, mtod(m, const struct ieee80211_frame_min *)); /* * Track rx rssi and do any rx antenna management. */ an = ATH_NODE(ni); ATH_RSSI_LPF(an->an_avgrssi, ds->ds_rxstat.rs_rssi); if (sc->sc_diversity) { /* * When using fast diversity, change the default rx * antenna if diversity chooses the other antenna 3 * times in a row. */ if (sc->sc_defant != ds->ds_rxstat.rs_antenna) { if (++sc->sc_rxotherant >= 3) ath_setdefantenna(sc, ds->ds_rxstat.rs_antenna); } else sc->sc_rxotherant = 0; } /* * Send frame up for processing. */ ieee80211_input(ic, m, ni, ds->ds_rxstat.rs_rssi, ds->ds_rxstat.rs_tstamp); /* * Reclaim node reference. */ ieee80211_free_node(ni); rx_next: STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list); } while (ath_rxbuf_init(sc, bf) == 0); /* rx signal state monitoring */ ath_hal_rxmonitor(ah, &ATH_NODE(ic->ic_bss)->an_halstats); NET_UNLOCK_GIANT(); /* XXX */ #undef PA2DESC } /* * Setup a h/w transmit queue. */ static struct ath_txq * ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) { #define N(a) (sizeof(a)/sizeof(a[0])) struct ath_hal *ah = sc->sc_ah; HAL_TXQ_INFO qi; int qnum; memset(&qi, 0, sizeof(qi)); qi.tqi_subtype = subtype; qi.tqi_aifs = HAL_TXQ_USEDEFAULT; qi.tqi_cwmin = HAL_TXQ_USEDEFAULT; qi.tqi_cwmax = HAL_TXQ_USEDEFAULT; /* * Enable interrupts only for EOL and DESC conditions. * We mark tx descriptors to receive a DESC interrupt * when a tx queue gets deep; otherwise waiting for the * EOL to reap descriptors. Note that this is done to * reduce interrupt load and this only defers reaping * descriptors, never transmitting frames. Aside from * reducing interrupts this also permits more concurrency. * The only potential downside is if the tx queue backs * up in which case the top half of the kernel may backup * due to a lack of tx descriptors. */ qi.tqi_qflags = TXQ_FLAG_TXEOLINT_ENABLE | TXQ_FLAG_TXDESCINT_ENABLE; qnum = ath_hal_setuptxqueue(ah, qtype, &qi); if (qnum == -1) { /* * NB: don't print a message, this happens * ormally on parts with too few tx queues */ return NULL; } if (qnum >= N(sc->sc_txq)) { device_printf(sc->sc_dev, "hal qnum %u out of range, max %zu!\n", qnum, N(sc->sc_txq)); ath_hal_releasetxqueue(ah, qnum); return NULL; } if (!ATH_TXQ_SETUP(sc, qnum)) { struct ath_txq *txq = &sc->sc_txq[qnum]; txq->axq_qnum = qnum; txq->axq_depth = 0; txq->axq_intrcnt = 0; txq->axq_link = NULL; STAILQ_INIT(&txq->axq_q); ATH_TXQ_LOCK_INIT(sc, txq); sc->sc_txqsetup |= 1<sc_txq[qnum]; #undef N } /* * Setup a hardware data transmit queue for the specified * access control. The hal may not support all requested * queues in which case it will return a reference to a * previously setup queue. We record the mapping from ac's * to h/w queues for use by ath_tx_start and also track * the set of h/w queues being used to optimize work in the * transmit interrupt handler and related routines. */ static int ath_tx_setup(struct ath_softc *sc, int ac, int haltype) { #define N(a) (sizeof(a)/sizeof(a[0])) struct ath_txq *txq; if (ac >= N(sc->sc_ac2q)) { device_printf(sc->sc_dev, "AC %u out of range, max %zu!\n", ac, N(sc->sc_ac2q)); return 0; } txq = ath_txq_setup(sc, HAL_TX_QUEUE_DATA, haltype); if (txq != NULL) { sc->sc_ac2q[ac] = txq; return 1; } else return 0; #undef N } /* * Update WME parameters for a transmit queue. */ static int ath_txq_update(struct ath_softc *sc, int ac) { #define ATH_EXPONENT_TO_VALUE(v) ((1<sc_ic; struct ath_txq *txq = sc->sc_ac2q[ac]; struct wmeParams *wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac]; struct ath_hal *ah = sc->sc_ah; HAL_TXQ_INFO qi; ath_hal_gettxqueueprops(ah, txq->axq_qnum, &qi); qi.tqi_aifs = wmep->wmep_aifsn; qi.tqi_cwmin = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin); qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax); qi.tqi_burstTime = ATH_TXOP_TO_US(wmep->wmep_txopLimit); if (!ath_hal_settxqueueprops(ah, txq->axq_qnum, &qi)) { device_printf(sc->sc_dev, "unable to update hardware queue " "parameters for %s traffic!\n", ieee80211_wme_acnames[ac]); return 0; } else { ath_hal_resettxqueue(ah, txq->axq_qnum); /* push to h/w */ return 1; } #undef ATH_TXOP_TO_US #undef ATH_EXPONENT_TO_VALUE } /* * Callback from the 802.11 layer to update WME parameters. */ static int ath_wme_update(struct ieee80211com *ic) { struct ath_softc *sc = ic->ic_ifp->if_softc; return !ath_txq_update(sc, WME_AC_BE) || !ath_txq_update(sc, WME_AC_BK) || !ath_txq_update(sc, WME_AC_VI) || !ath_txq_update(sc, WME_AC_VO) ? EIO : 0; } /* * Reclaim resources for a setup queue. */ static void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq) { ath_hal_releasetxqueue(sc->sc_ah, txq->axq_qnum); ATH_TXQ_LOCK_DESTROY(txq); sc->sc_txqsetup &= ~(1<axq_qnum); } /* * Reclaim all tx queue resources. */ static void ath_tx_cleanup(struct ath_softc *sc) { int i; ATH_TXBUF_LOCK_DESTROY(sc); for (i = 0; i < HAL_NUM_TX_QUEUES; i++) if (ATH_TXQ_SETUP(sc, i)) ath_tx_cleanupq(sc, &sc->sc_txq[i]); } static int ath_tx_start(struct ath_softc *sc, struct ieee80211_node *ni, struct ath_buf *bf, struct mbuf *m0) { struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; struct ifnet *ifp = &sc->sc_if; int i, error, iswep, ismcast, keyix, hdrlen, pktlen, try0; u_int8_t rix, txrate, ctsrate; u_int8_t cix = 0xff; /* NB: silence compiler */ struct ath_desc *ds, *ds0; struct ath_txq *txq; struct mbuf *m; struct ieee80211_frame *wh; u_int subtype, flags, ctsduration; HAL_PKT_TYPE atype; const HAL_RATE_TABLE *rt; HAL_BOOL shortPreamble; struct ath_node *an; wh = mtod(m0, struct ieee80211_frame *); iswep = wh->i_fc[1] & IEEE80211_FC1_WEP; ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1); hdrlen = ieee80211_anyhdrsize(wh); /* * Packet length must not include by any * pad bytes; deduct it here. */ pktlen = m0->m_pkthdr.len - (hdrlen & 3); if (iswep) { const struct ieee80211_cipher *cip; struct ieee80211_key *k; /* * Construct the 802.11 header+trailer for an encrypted * frame. The only reason this can fail is because of an * unknown or unsupported cipher/key type. */ k = ieee80211_crypto_encap(ic, ni, m0); if (k == NULL) { /* * This can happen when the key is yanked after the * frame was queued. Just discard the frame; the * 802.11 layer counts failures and provides * debugging/diagnostics. */ return EIO; } /* * Adjust the packet + header lengths for the crypto * additions and calculate the h/w key index. When * a s/w mic is done the frame will have had any mic * added to it prior to entry so skb->len above will * account for it. Otherwise we need to add it to the * packet length. */ cip = k->wk_cipher; hdrlen += cip->ic_header; pktlen += cip->ic_header + cip->ic_trailer; if ((k->wk_flags & IEEE80211_KEY_SWMIC) == 0) pktlen += cip->ic_miclen; keyix = k->wk_keyix; /* packet header may have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } else keyix = HAL_TXKEYIX_INVALID; pktlen += IEEE80211_CRC_LEN; /* * Load the DMA map so any coalescing is done. This * also calculates the number of descriptors we need. */ error = bus_dmamap_load_mbuf(sc->sc_dmat, bf->bf_dmamap, m0, ath_mbuf_load_cb, bf, BUS_DMA_NOWAIT); if (error == EFBIG) { /* XXX packet requires too many descriptors */ bf->bf_nseg = ATH_TXDESC+1; } else if (error != 0) { sc->sc_stats.ast_tx_busdma++; m_freem(m0); return error; } /* * Discard null packets and check for packets that * require too many TX descriptors. We try to convert * the latter to a cluster. */ if (bf->bf_nseg > ATH_TXDESC) { /* too many desc's, linearize */ sc->sc_stats.ast_tx_linear++; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { sc->sc_stats.ast_tx_nombuf++; m_freem(m0); return ENOMEM; } M_MOVE_PKTHDR(m, m0); MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { sc->sc_stats.ast_tx_nomcl++; m_freem(m0); m_free(m); return ENOMEM; } m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t)); m_freem(m0); m->m_len = m->m_pkthdr.len; m0 = m; error = bus_dmamap_load_mbuf(sc->sc_dmat, bf->bf_dmamap, m0, ath_mbuf_load_cb, bf, BUS_DMA_NOWAIT); if (error != 0) { sc->sc_stats.ast_tx_busdma++; m_freem(m0); return error; } KASSERT(bf->bf_nseg == 1, ("ath_tx_start: packet not one segment; nseg %u", bf->bf_nseg)); } else if (bf->bf_nseg == 0) { /* null packet, discard */ sc->sc_stats.ast_tx_nodata++; m_freem(m0); return EIO; } DPRINTF(sc, ATH_DEBUG_XMIT, "%s: m %p len %u\n", __func__, m0, pktlen); bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); bf->bf_m = m0; bf->bf_node = ni; /* NB: held reference */ /* setup descriptors */ ds = bf->bf_desc; rt = sc->sc_currates; KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); /* * NB: the 802.11 layer marks whether or not we should * use short preamble based on the current mode and * negotiated parameters. */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) { shortPreamble = AH_TRUE; sc->sc_stats.ast_tx_shortpre++; } else { shortPreamble = AH_FALSE; } an = ATH_NODE(ni); flags = HAL_TXDESC_CLRDMASK; /* XXX needed for crypto errs */ /* * Calculate Atheros packet type from IEEE80211 packet header, * setup for rate calculations, and select h/w transmit queue. */ switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { case IEEE80211_FC0_TYPE_MGT: subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) atype = HAL_PKT_TYPE_BEACON; else if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) atype = HAL_PKT_TYPE_PROBE_RESP; else if (subtype == IEEE80211_FC0_SUBTYPE_ATIM) atype = HAL_PKT_TYPE_ATIM; else atype = HAL_PKT_TYPE_NORMAL; /* XXX */ rix = 0; /* XXX lowest rate */ try0 = ATH_TXMAXTRY; if (shortPreamble) txrate = an->an_tx_mgtratesp; else txrate = an->an_tx_mgtrate; /* NB: force all management frames to highest queue */ if (ni->ni_flags & IEEE80211_NODE_QOS) { /* NB: force all management frames to highest queue */ txq = sc->sc_ac2q[WME_AC_VO]; } else txq = sc->sc_ac2q[WME_AC_BE]; flags |= HAL_TXDESC_INTREQ; /* force interrupt */ break; case IEEE80211_FC0_TYPE_CTL: atype = HAL_PKT_TYPE_PSPOLL; /* stop setting of duration */ rix = 0; /* XXX lowest rate */ try0 = ATH_TXMAXTRY; if (shortPreamble) txrate = an->an_tx_mgtratesp; else txrate = an->an_tx_mgtrate; /* NB: force all ctl frames to highest queue */ if (ni->ni_flags & IEEE80211_NODE_QOS) { /* NB: force all ctl frames to highest queue */ txq = sc->sc_ac2q[WME_AC_VO]; } else txq = sc->sc_ac2q[WME_AC_BE]; flags |= HAL_TXDESC_INTREQ; /* force interrupt */ break; case IEEE80211_FC0_TYPE_DATA: atype = HAL_PKT_TYPE_NORMAL; /* default */ /* * Data frames; consult the rate control module. */ ath_rate_findrate(sc, an, shortPreamble, pktlen, &rix, &try0, &txrate); /* * Default all non-QoS traffic to the background queue. */ if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) { u_int pri = M_WME_GETAC(m0); txq = sc->sc_ac2q[pri]; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[pri].wmep_noackPolicy) flags |= HAL_TXDESC_NOACK; } else txq = sc->sc_ac2q[WME_AC_BE]; break; default: if_printf(ifp, "bogus frame type 0x%x (%s)\n", wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK, __func__); /* XXX statistic */ m_freem(m0); return EIO; } /* * When servicing one or more stations in power-save mode * multicast frames must be buffered until after the beacon. * We use the CAB queue for that. */ if (ismcast && ic->ic_ps_sta) { txq = sc->sc_cabq; /* XXX? more bit in 802.11 frame header */ } /* * Calculate miscellaneous flags. */ if (ismcast) { flags |= HAL_TXDESC_NOACK; /* no ack on broad/multicast */ sc->sc_stats.ast_tx_noack++; } else if (pktlen > ic->ic_rtsthreshold) { flags |= HAL_TXDESC_RTSENA; /* RTS based on frame length */ cix = rt->info[rix].controlRate; sc->sc_stats.ast_tx_rts++; } /* * If 802.11g protection is enabled, determine whether * to use RTS/CTS or just CTS. Note that this is only * done for OFDM unicast frames. */ if ((ic->ic_flags & IEEE80211_F_USEPROT) && rt->info[rix].phy == IEEE80211_T_OFDM && (flags & HAL_TXDESC_NOACK) == 0) { /* XXX fragments must use CCK rates w/ protection */ if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) flags |= HAL_TXDESC_RTSENA; else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) flags |= HAL_TXDESC_CTSENA; cix = rt->info[sc->sc_protrix].controlRate; sc->sc_stats.ast_tx_protect++; } /* * Calculate duration. This logically belongs in the 802.11 * layer but it lacks sufficient information to calculate it. */ if ((flags & HAL_TXDESC_NOACK) == 0 && (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL) { u_int16_t dur; /* * XXX not right with fragmentation. */ if (shortPreamble) dur = rt->info[rix].spAckDuration; else dur = rt->info[rix].lpAckDuration; *(u_int16_t *)wh->i_dur = htole16(dur); } /* * Calculate RTS/CTS rate and duration if needed. */ ctsduration = 0; if (flags & (HAL_TXDESC_RTSENA|HAL_TXDESC_CTSENA)) { /* * CTS transmit rate is derived from the transmit rate * by looking in the h/w rate table. We must also factor * in whether or not a short preamble is to be used. */ /* NB: cix is set above where RTS/CTS is enabled */ KASSERT(cix != 0xff, ("cix not setup")); ctsrate = rt->info[cix].rateCode; /* * Compute the transmit duration based on the frame * size and the size of an ACK frame. We call into the * HAL to do the computation since it depends on the * characteristics of the actual PHY being used. * * NB: CTS is assumed the same size as an ACK so we can * use the precalculated ACK durations. */ if (shortPreamble) { ctsrate |= rt->info[cix].shortPreamble; if (flags & HAL_TXDESC_RTSENA) /* SIFS + CTS */ ctsduration += rt->info[cix].spAckDuration; ctsduration += ath_hal_computetxtime(ah, rt, pktlen, rix, AH_TRUE); if ((flags & HAL_TXDESC_NOACK) == 0) /* SIFS + ACK */ ctsduration += rt->info[cix].spAckDuration; } else { if (flags & HAL_TXDESC_RTSENA) /* SIFS + CTS */ ctsduration += rt->info[cix].lpAckDuration; ctsduration += ath_hal_computetxtime(ah, rt, pktlen, rix, AH_FALSE); if ((flags & HAL_TXDESC_NOACK) == 0) /* SIFS + ACK */ ctsduration += rt->info[cix].lpAckDuration; } /* * Must disable multi-rate retry when using RTS/CTS. */ try0 = ATH_TXMAXTRY; } else ctsrate = 0; if (IFF_DUMPPKTS(sc, ATH_DEBUG_XMIT)) ieee80211_dump_pkt(mtod(m0, caddr_t), m0->m_len, sc->sc_hwmap[txrate], -1); if (ic->ic_rawbpf) bpf_mtap(ic->ic_rawbpf, m0); if (sc->sc_drvbpf) { sc->sc_tx_th.wt_flags = 0; if (shortPreamble) sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; if (iswep) sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_WEP; sc->sc_tx_th.wt_rate = ni->ni_rates.rs_rates[ni->ni_txrate]; sc->sc_tx_th.wt_txpower = ni->ni_txpower; sc->sc_tx_th.wt_antenna = sc->sc_txantenna; bpf_mtap2(sc->sc_drvbpf, &sc->sc_tx_th, sc->sc_tx_th_len, m0); } /* * Determine if a tx interrupt should be generated for * this descriptor. We take a tx interrupt to reap * descriptors when the h/w hits an EOL condition or * when the descriptor is specifically marked to generate * an interrupt. We periodically mark descriptors in this * way to insure timely replenishing of the supply needed * for sending frames. Defering interrupts reduces system * load and potentially allows more concurrent work to be * done but if done to aggressively can cause senders to * backup. * * NB: use >= to deal with sc_txintrperiod changing * dynamically through sysctl. */ if (flags & HAL_TXDESC_INTREQ) { txq->axq_intrcnt = 0; } else if (++txq->axq_intrcnt >= sc->sc_txintrperiod) { flags |= HAL_TXDESC_INTREQ; txq->axq_intrcnt = 0; } /* * Formulate first tx descriptor with tx controls. */ /* XXX check return value? */ ath_hal_setuptxdesc(ah, ds , pktlen /* packet length */ , hdrlen /* header length */ , atype /* Atheros packet type */ , ni->ni_txpower /* txpower */ , txrate, try0 /* series 0 rate/tries */ , keyix /* key cache index */ , sc->sc_txantenna /* antenna mode */ , flags /* flags */ , ctsrate /* rts/cts rate */ , ctsduration /* rts/cts duration */ ); /* * Setup the multi-rate retry state only when we're * going to use it. This assumes ath_hal_setuptxdesc * initializes the descriptors (so we don't have to) * when the hardware supports multi-rate retry and * we don't use it. */ if (try0 != ATH_TXMAXTRY) ath_rate_setupxtxdesc(sc, an, ds, shortPreamble, rix); /* * Fillin the remainder of the descriptor info. */ ds0 = ds; for (i = 0; i < bf->bf_nseg; i++, ds++) { ds->ds_data = bf->bf_segs[i].ds_addr; if (i == bf->bf_nseg - 1) ds->ds_link = 0; else ds->ds_link = bf->bf_daddr + sizeof(*ds) * (i + 1); ath_hal_filltxdesc(ah, ds , bf->bf_segs[i].ds_len /* segment length */ , i == 0 /* first segment */ , i == bf->bf_nseg - 1 /* last segment */ , ds0 /* first descriptor */ ); DPRINTF(sc, ATH_DEBUG_XMIT, "%s: %d: %08x %08x %08x %08x %08x %08x\n", __func__, i, ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, ds->ds_hw[0], ds->ds_hw[1]); } #if 0 if ((flags & (HAL_TXDESC_RTSENA | HAL_TXDESC_CTSENA)) && !ath_hal_updateCTSForBursting(ah, ds , txq->axq_linkbuf != NULL ? txq->axq_linkbuf->bf_desc : NULL , txq->axq_lastdsWithCTS , txq->axq_gatingds , IEEE80211_TXOP_TO_US(ic->ic_chanParams.cap_wmeParams[skb->priority].wmep_txopLimit) , ath_hal_computetxtime(ah, rt, IEEE80211_ACK_LEN, cix, AH_TRUE))) { ATH_TXQ_LOCK(txq); txq->axq_lastdsWithCTS = ds; /* set gating Desc to final desc */ txq->axq_gatingds = (struct ath_desc *)txq->axq_link; ATH_TXQ_UNLOCK(txq); } #endif /* * Insert the frame on the outbound list and * pass it on to the hardware. */ ATH_TXQ_LOCK(txq); ATH_TXQ_INSERT_TAIL(txq, bf, bf_list); if (txq->axq_link == NULL) { ath_hal_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr); DPRINTF(sc, ATH_DEBUG_XMIT, "%s: TXDP[%u] = %p (%p) depth %d\n", __func__, txq->axq_qnum, (caddr_t)bf->bf_daddr, bf->bf_desc, txq->axq_depth); } else { *txq->axq_link = bf->bf_daddr; DPRINTF(sc, ATH_DEBUG_XMIT, "%s: link[%u](%p)=%p (%p) depth %d\n", __func__, txq->axq_qnum, txq->axq_link, (caddr_t)bf->bf_daddr, bf->bf_desc, txq->axq_depth); } txq->axq_link = &bf->bf_desc[bf->bf_nseg - 1].ds_link; ATH_TXQ_UNLOCK(txq); if (sc->sc_softled) ath_update_led(sc); /* * The CAB queue is started from the SWBA handler since * frames only go out on DTIM and to avoid possible races. */ if (txq != sc->sc_cabq) ath_hal_txstart(ah, txq->axq_qnum); return 0; } /* * Process completed xmit descriptors from the specified queue. */ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) { struct ath_hal *ah = sc->sc_ah; struct ieee80211com *ic = &sc->sc_ic; struct ath_buf *bf; struct ath_desc *ds; struct ieee80211_node *ni; struct ath_node *an; int sr, lr, pri; HAL_STATUS status; DPRINTF(sc, ATH_DEBUG_TX_PROC, "%s: tx queue %u head %p link %p\n", __func__, txq->axq_qnum, (caddr_t)(uintptr_t) ath_hal_gettxbuf(sc->sc_ah, txq->axq_qnum), txq->axq_link); for (;;) { ATH_TXQ_LOCK(txq); txq->axq_intrcnt = 0; /* reset periodic desc intr count */ bf = STAILQ_FIRST(&txq->axq_q); if (bf == NULL) { txq->axq_link = NULL; ATH_TXQ_UNLOCK(txq); break; } /* only the last descriptor is needed */ ds = &bf->bf_desc[bf->bf_nseg - 1]; status = ath_hal_txprocdesc(ah, ds); #ifdef AR_DEBUG if (sc->sc_debug & ATH_DEBUG_XMIT_DESC) ath_printtxbuf(bf, status == HAL_OK); #endif if (status == HAL_EINPROGRESS) { ATH_TXQ_UNLOCK(txq); break; } #if 0 if (bf->bf_desc == txq->axq_lastdsWithCTS) txq->axq_lastdsWithCTS = NULL; if (ds == txq->axq_gatingds) txq->axq_gatingds = NULL; #endif ATH_TXQ_REMOVE_HEAD(txq, bf_list); ATH_TXQ_UNLOCK(txq); ni = bf->bf_node; if (ni != NULL) { an = ATH_NODE(ni); if (ds->ds_txstat.ts_status == 0) { u_int8_t txant = ds->ds_txstat.ts_antenna; sc->sc_stats.ast_ant_tx[txant]++; sc->sc_ant_tx[txant]++; if (ds->ds_txstat.ts_rate & HAL_TXSTAT_ALTRATE) sc->sc_stats.ast_tx_altrate++; sc->sc_stats.ast_tx_rssi = ds->ds_txstat.ts_rssi; ATH_RSSI_LPF(an->an_halstats.ns_avgtxrssi, ds->ds_txstat.ts_rssi); pri = M_WME_GETAC(bf->bf_m); if (pri >= WME_AC_VO) ic->ic_wme.wme_hipri_traffic++; ni->ni_inact = ni->ni_inact_reload; } else { if (ds->ds_txstat.ts_status & HAL_TXERR_XRETRY) sc->sc_stats.ast_tx_xretries++; if (ds->ds_txstat.ts_status & HAL_TXERR_FIFO) sc->sc_stats.ast_tx_fifoerr++; if (ds->ds_txstat.ts_status & HAL_TXERR_FILT) sc->sc_stats.ast_tx_filtered++; } sr = ds->ds_txstat.ts_shortretry; lr = ds->ds_txstat.ts_longretry; sc->sc_stats.ast_tx_shortretry += sr; sc->sc_stats.ast_tx_longretry += lr; /* * Hand the descriptor to the rate control algorithm. */ ath_rate_tx_complete(sc, an, ds); /* * Reclaim reference to node. * * NB: the node may be reclaimed here if, for example * this is a DEAUTH message that was sent and the * node was timed out due to inactivity. */ ieee80211_free_node(ni); } bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); m_freem(bf->bf_m); bf->bf_m = NULL; bf->bf_node = NULL; ATH_TXBUF_LOCK(sc); STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); ATH_TXBUF_UNLOCK(sc); } } /* * Deferred processing of transmit interrupt; special-cased * for a single hardware transmit queue (e.g. 5210 and 5211). */ static void ath_tx_proc_q0(void *arg, int npending) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; ath_tx_processq(sc, &sc->sc_txq[0]); ath_tx_processq(sc, sc->sc_cabq); ifp->if_flags &= ~IFF_OACTIVE; sc->sc_tx_timer = 0; ath_start(ifp); } /* * Deferred processing of transmit interrupt; special-cased * for four hardware queues, 0-3 (e.g. 5212 w/ WME support). */ static void ath_tx_proc_q0123(void *arg, int npending) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; /* * Process each active queue. */ ath_tx_processq(sc, &sc->sc_txq[0]); ath_tx_processq(sc, &sc->sc_txq[1]); ath_tx_processq(sc, &sc->sc_txq[2]); ath_tx_processq(sc, &sc->sc_txq[3]); ath_tx_processq(sc, sc->sc_cabq); ifp->if_flags &= ~IFF_OACTIVE; sc->sc_tx_timer = 0; ath_start(ifp); } /* * Deferred processing of transmit interrupt. */ static void ath_tx_proc(void *arg, int npending) { struct ath_softc *sc = arg; struct ifnet *ifp = &sc->sc_if; int i; /* * Process each active queue. */ /* XXX faster to read ISR_S0_S and ISR_S1_S to determine q's? */ for (i = 0; i < HAL_NUM_TX_QUEUES; i++) if (ATH_TXQ_SETUP(sc, i)) ath_tx_processq(sc, &sc->sc_txq[i]); ifp->if_flags &= ~IFF_OACTIVE; sc->sc_tx_timer = 0; ath_start(ifp); } static void ath_tx_draintxq(struct ath_softc *sc, struct ath_txq *txq) { struct ath_hal *ah = sc->sc_ah; struct ieee80211_node *ni; struct ath_buf *bf; /* * NB: this assumes output has been stopped and * we do not need to block ath_tx_tasklet */ for (;;) { ATH_TXQ_LOCK(txq); bf = STAILQ_FIRST(&txq->axq_q); if (bf == NULL) { txq->axq_link = NULL; ATH_TXQ_UNLOCK(txq); break; } ATH_TXQ_REMOVE_HEAD(txq, bf_list); ATH_TXQ_UNLOCK(txq); #ifdef AR_DEBUG if (sc->sc_debug & ATH_DEBUG_RESET) ath_printtxbuf(bf, ath_hal_txprocdesc(ah, bf->bf_desc) == HAL_OK); #endif /* AR_DEBUG */ bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); m_freem(bf->bf_m); bf->bf_m = NULL; ni = bf->bf_node; bf->bf_node = NULL; if (ni != NULL) { /* * Reclaim node reference. */ ieee80211_free_node(ni); } ATH_TXBUF_LOCK(sc); STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); ATH_TXBUF_UNLOCK(sc); } } static void ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq) { struct ath_hal *ah = sc->sc_ah; (void) ath_hal_stoptxdma(ah, txq->axq_qnum); DPRINTF(sc, ATH_DEBUG_RESET, "%s: tx queue [%u] %p, link %p\n", __func__, txq->axq_qnum, (caddr_t)(uintptr_t) ath_hal_gettxbuf(ah, txq->axq_qnum), txq->axq_link); } /* * Drain the transmit queues and reclaim resources. */ static void ath_draintxq(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; struct ifnet *ifp = &sc->sc_if; int i; /* XXX return value */ if (!sc->sc_invalid) { /* don't touch the hardware if marked invalid */ (void) ath_hal_stoptxdma(ah, sc->sc_bhalq); DPRINTF(sc, ATH_DEBUG_RESET, "%s: beacon queue %p\n", __func__, (caddr_t)(uintptr_t) ath_hal_gettxbuf(ah, sc->sc_bhalq)); for (i = 0; i < HAL_NUM_TX_QUEUES; i++) if (ATH_TXQ_SETUP(sc, i)) ath_tx_stopdma(sc, &sc->sc_txq[i]); } for (i = 0; i < HAL_NUM_TX_QUEUES; i++) if (ATH_TXQ_SETUP(sc, i)) ath_tx_draintxq(sc, &sc->sc_txq[i]); ifp->if_flags &= ~IFF_OACTIVE; sc->sc_tx_timer = 0; } /* * Disable the receive h/w in preparation for a reset. */ static void ath_stoprecv(struct ath_softc *sc) { #define PA2DESC(_sc, _pa) \ ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) struct ath_hal *ah = sc->sc_ah; ath_hal_stoppcurecv(ah); /* disable PCU */ ath_hal_setrxfilter(ah, 0); /* clear recv filter */ ath_hal_stopdmarecv(ah); /* disable DMA engine */ DELAY(3000); /* 3ms is long enough for 1 frame */ #ifdef AR_DEBUG if (sc->sc_debug & (ATH_DEBUG_RESET | ATH_DEBUG_FATAL)) { struct ath_buf *bf; printf("%s: rx queue %p, link %p\n", __func__, (caddr_t)(uintptr_t) ath_hal_getrxbuf(ah), sc->sc_rxlink); STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { struct ath_desc *ds = bf->bf_desc; HAL_STATUS status = ath_hal_rxprocdesc(ah, ds, bf->bf_daddr, PA2DESC(sc, ds->ds_link)); if (status == HAL_OK || (sc->sc_debug & ATH_DEBUG_FATAL)) ath_printrxbuf(bf, status == HAL_OK); } } #endif sc->sc_rxlink = NULL; /* just in case */ #undef PA2DESC } /* * Enable the receive h/w following a reset. */ static int ath_startrecv(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf; sc->sc_rxlink = NULL; STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { int error = ath_rxbuf_init(sc, bf); if (error != 0) { DPRINTF(sc, ATH_DEBUG_RECV, "%s: ath_rxbuf_init failed %d\n", __func__, error); return error; } } bf = STAILQ_FIRST(&sc->sc_rxbuf); ath_hal_putrxbuf(ah, bf->bf_daddr); ath_hal_rxena(ah); /* enable recv descriptors */ ath_mode_init(sc); /* set filters, etc. */ ath_hal_startpcurecv(ah); /* re-enable PCU/DMA engine */ return 0; } /* * Update internal state after a channel change. */ static void ath_chan_change(struct ath_softc *sc, struct ieee80211_channel *chan) { struct ieee80211com *ic = &sc->sc_ic; enum ieee80211_phymode mode; /* * Change channels and update the h/w rate map * if we're switching; e.g. 11a to 11b/g. */ mode = ieee80211_chan2mode(ic, chan); if (mode != sc->sc_curmode) ath_setcurmode(sc, mode); /* * Update BPF state. */ sc->sc_tx_th.wt_chan_freq = sc->sc_rx_th.wr_chan_freq = htole16(chan->ic_freq); sc->sc_tx_th.wt_chan_flags = sc->sc_rx_th.wr_chan_flags = htole16(chan->ic_flags); } /* * Set/change channels. If the channel is really being changed, * it's done by reseting the chip. To accomplish this we must * first cleanup any pending DMA, then restart stuff after a la * ath_init. */ static int ath_chan_set(struct ath_softc *sc, struct ieee80211_channel *chan) { struct ath_hal *ah = sc->sc_ah; struct ieee80211com *ic = &sc->sc_ic; HAL_CHANNEL hchan; /* * Convert to a HAL channel description with * the flags constrained to reflect the current * operating mode. */ hchan.channel = chan->ic_freq; hchan.channelFlags = ath_chan2flags(ic, chan); DPRINTF(sc, ATH_DEBUG_RESET, "%s: %u (%u MHz) -> %u (%u MHz)\n", __func__, ath_hal_mhz2ieee(sc->sc_curchan.channel, sc->sc_curchan.channelFlags), sc->sc_curchan.channel, ath_hal_mhz2ieee(hchan.channel, hchan.channelFlags), hchan.channel); if (hchan.channel != sc->sc_curchan.channel || hchan.channelFlags != sc->sc_curchan.channelFlags) { HAL_STATUS status; /* * To switch channels clear any pending DMA operations; * wait long enough for the RX fifo to drain, reset the * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ ath_hal_intrset(ah, 0); /* disable interrupts */ ath_draintxq(sc); /* clear pending tx frames */ ath_stoprecv(sc); /* turn off frame recv */ if (!ath_hal_reset(ah, ic->ic_opmode, &hchan, AH_TRUE, &status)) { if_printf(ic->ic_ifp, "ath_chan_set: unable to reset " "channel %u (%u Mhz)\n", ieee80211_chan2ieee(ic, chan), chan->ic_freq); return EIO; } sc->sc_curchan = hchan; ath_update_txpow(sc); /* update tx power state */ /* * Re-enable rx framework. */ if (ath_startrecv(sc) != 0) { if_printf(ic->ic_ifp, "ath_chan_set: unable to restart recv logic\n"); return EIO; } /* * Change channels and update the h/w rate map * if we're switching; e.g. 11a to 11b/g. */ ic->ic_ibss_chan = chan; ath_chan_change(sc, chan); /* * Re-enable interrupts. */ ath_hal_intrset(ah, sc->sc_imask); } return 0; } static void ath_next_scan(void *arg) { struct ath_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; if (ic->ic_state == IEEE80211_S_SCAN) ieee80211_next_scan(ic); } /* * Periodically recalibrate the PHY to account * for temperature/environment changes. */ static void ath_calibrate(void *arg) { struct ath_softc *sc = arg; struct ath_hal *ah = sc->sc_ah; sc->sc_stats.ast_per_cal++; DPRINTF(sc, ATH_DEBUG_CALIBRATE, "%s: channel %u/%x\n", __func__, sc->sc_curchan.channel, sc->sc_curchan.channelFlags); if (ath_hal_getrfgain(ah) == HAL_RFGAIN_NEED_CHANGE) { /* * Rfgain is out of bounds, reset the chip * to load new gain values. */ sc->sc_stats.ast_per_rfgain++; ath_reset(&sc->sc_if); } if (!ath_hal_calibrate(ah, &sc->sc_curchan)) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: calibration of channel %u failed\n", __func__, sc->sc_curchan.channel); sc->sc_stats.ast_per_calfail++; } callout_reset(&sc->sc_cal_ch, ath_calinterval * hz, ath_calibrate, sc); } static int ath_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) { struct ifnet *ifp = ic->ic_ifp; struct ath_softc *sc = ifp->if_softc; struct ath_hal *ah = sc->sc_ah; struct ieee80211_node *ni; int i, error; const u_int8_t *bssid; u_int32_t rfilt; static const HAL_LED_STATE leds[] = { HAL_LED_INIT, /* IEEE80211_S_INIT */ HAL_LED_SCAN, /* IEEE80211_S_SCAN */ HAL_LED_AUTH, /* IEEE80211_S_AUTH */ HAL_LED_ASSOC, /* IEEE80211_S_ASSOC */ HAL_LED_RUN, /* IEEE80211_S_RUN */ }; DPRINTF(sc, ATH_DEBUG_STATE, "%s: %s -> %s\n", __func__, ieee80211_state_name[ic->ic_state], ieee80211_state_name[nstate]); callout_stop(&sc->sc_scan_ch); callout_stop(&sc->sc_cal_ch); ath_hal_setledstate(ah, leds[nstate]); /* set LED */ if (nstate == IEEE80211_S_INIT) { sc->sc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); ath_hal_intrset(ah, sc->sc_imask); /* * Notify the rate control algorithm. */ ath_rate_newstate(sc, nstate); goto done; } ni = ic->ic_bss; error = ath_chan_set(sc, ni->ni_chan); if (error != 0) goto bad; rfilt = ath_calcrxfilter(sc, nstate); if (nstate == IEEE80211_S_SCAN) bssid = ifp->if_broadcastaddr; else bssid = ni->ni_bssid; ath_hal_setrxfilter(ah, rfilt); DPRINTF(sc, ATH_DEBUG_STATE, "%s: RX filter 0x%x bssid %s\n", __func__, rfilt, ether_sprintf(bssid)); if (nstate == IEEE80211_S_RUN && ic->ic_opmode == IEEE80211_M_STA) ath_hal_setassocid(ah, bssid, ni->ni_associd); else ath_hal_setassocid(ah, bssid, 0); if (ic->ic_flags & IEEE80211_F_PRIVACY) { for (i = 0; i < IEEE80211_WEP_NKID; i++) if (ath_hal_keyisvalid(ah, i)) ath_hal_keysetmac(ah, i, bssid); } /* * Notify the rate control algorithm so rates * are setup should ath_beacon_alloc be called. */ ath_rate_newstate(sc, nstate); if (ic->ic_opmode == IEEE80211_M_MONITOR) { /* nothing to do */; } else if (nstate == IEEE80211_S_RUN) { DPRINTF(sc, ATH_DEBUG_STATE, "%s(RUN): ic_flags=0x%08x iv=%d bssid=%s " "capinfo=0x%04x chan=%d\n" , __func__ , ic->ic_flags , ni->ni_intval , ether_sprintf(ni->ni_bssid) , ni->ni_capinfo , ieee80211_chan2ieee(ic, ni->ni_chan)); /* * Allocate and setup the beacon frame for AP or adhoc mode. */ if (ic->ic_opmode == IEEE80211_M_HOSTAP || ic->ic_opmode == IEEE80211_M_IBSS) { error = ath_beacon_alloc(sc, ni); if (error != 0) goto bad; } /* * Configure the beacon and sleep timers. */ ath_beacon_config(sc); } else { ath_hal_intrset(ah, sc->sc_imask &~ (HAL_INT_SWBA | HAL_INT_BMISS)); sc->sc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); } done: /* * Invoke the parent method to complete the work. */ error = sc->sc_newstate(ic, nstate, arg); /* * Finally, start any timers. */ if (nstate == IEEE80211_S_RUN) { /* start periodic recalibration timer */ callout_reset(&sc->sc_cal_ch, ath_calinterval * hz, ath_calibrate, sc); } else if (nstate == IEEE80211_S_SCAN) { /* start ap/neighbor scan timer */ callout_reset(&sc->sc_scan_ch, (ath_dwelltime * hz) / 1000, ath_next_scan, sc); } bad: return error; } /* * Setup driver-specific state for a newly associated node. * Note that we're called also on a re-associate, the isnew * param tells us if this is the first time or not. */ static void ath_newassoc(struct ieee80211com *ic, struct ieee80211_node *ni, int isnew) { struct ath_softc *sc = ic->ic_ifp->if_softc; ath_rate_newassoc(sc, ATH_NODE(ni), isnew); } static int ath_getchannels(struct ath_softc *sc, u_int cc, HAL_BOOL outdoor, HAL_BOOL xchanmode) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &sc->sc_if; struct ath_hal *ah = sc->sc_ah; HAL_CHANNEL *chans; int i, ix, nchan; chans = malloc(IEEE80211_CHAN_MAX * sizeof(HAL_CHANNEL), M_TEMP, M_NOWAIT); if (chans == NULL) { if_printf(ifp, "unable to allocate channel table\n"); return ENOMEM; } if (!ath_hal_init_channels(ah, chans, IEEE80211_CHAN_MAX, &nchan, cc, HAL_MODE_ALL, outdoor, xchanmode)) { u_int32_t rd; ath_hal_getregdomain(ah, &rd); if_printf(ifp, "unable to collect channel list from hal; " "regdomain likely %u country code %u\n", rd, cc); free(chans, M_TEMP); return EINVAL; } /* * Convert HAL channels to ieee80211 ones and insert * them in the table according to their channel number. */ for (i = 0; i < nchan; i++) { HAL_CHANNEL *c = &chans[i]; ix = ath_hal_mhz2ieee(c->channel, c->channelFlags); if (ix > IEEE80211_CHAN_MAX) { if_printf(ifp, "bad hal channel %u (%u/%x) ignored\n", ix, c->channel, c->channelFlags); continue; } /* NB: flags are known to be compatible */ if (ic->ic_channels[ix].ic_freq == 0) { ic->ic_channels[ix].ic_freq = c->channel; ic->ic_channels[ix].ic_flags = c->channelFlags; } else { /* channels overlap; e.g. 11g and 11b */ ic->ic_channels[ix].ic_flags |= c->channelFlags; } } free(chans, M_TEMP); return 0; } static void ath_update_led(struct ath_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; u_int32_t threshold; /* * When not associated, flash LED on for 5s, off for 200ms. * XXX this assumes 100ms beacon interval. */ if (ic->ic_state != IEEE80211_S_RUN) { threshold = 2 + sc->sc_ledstate * 48; } else { threshold = 2 + sc->sc_ledstate * 18; } if (ic->ic_stats.is_rx_beacon - sc->sc_beacons >= threshold) { ath_hal_gpioCfgOutput(ah, sc->sc_ledpin); ath_hal_gpioset(ah, sc->sc_ledpin, sc->sc_ledstate); sc->sc_ledstate ^= 1; sc->sc_beacons = ic->ic_stats.is_rx_beacon; } } static void ath_update_txpow(struct ath_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc->sc_ah; u_int32_t txpow; if (sc->sc_curtxpow != ic->ic_txpowlimit) { ath_hal_settxpowlimit(ah, ic->ic_txpowlimit); /* read back in case value is clamped */ ath_hal_gettxpowlimit(ah, &txpow); ic->ic_txpowlimit = sc->sc_curtxpow = txpow; } /* * Fetch max tx power level for status requests. */ ath_hal_getmaxtxpow(sc->sc_ah, &txpow); ic->ic_bss->ni_txpower = txpow; } static int ath_rate_setup(struct ath_softc *sc, u_int mode) { struct ath_hal *ah = sc->sc_ah; struct ieee80211com *ic = &sc->sc_ic; const HAL_RATE_TABLE *rt; struct ieee80211_rateset *rs; int i, maxrates; switch (mode) { case IEEE80211_MODE_11A: sc->sc_rates[mode] = ath_hal_getratetable(ah, HAL_MODE_11A); break; case IEEE80211_MODE_11B: sc->sc_rates[mode] = ath_hal_getratetable(ah, HAL_MODE_11B); break; case IEEE80211_MODE_11G: sc->sc_rates[mode] = ath_hal_getratetable(ah, HAL_MODE_11G); break; case IEEE80211_MODE_TURBO_A: sc->sc_rates[mode] = ath_hal_getratetable(ah, HAL_MODE_TURBO); break; case IEEE80211_MODE_TURBO_G: sc->sc_rates[mode] = ath_hal_getratetable(ah, HAL_MODE_108G); break; default: DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid mode %u\n", __func__, mode); return 0; } rt = sc->sc_rates[mode]; if (rt == NULL) return 0; if (rt->rateCount > IEEE80211_RATE_MAXSIZE) { DPRINTF(sc, ATH_DEBUG_ANY, "%s: rate table too small (%u > %u)\n", __func__, rt->rateCount, IEEE80211_RATE_MAXSIZE); maxrates = IEEE80211_RATE_MAXSIZE; } else maxrates = rt->rateCount; rs = &ic->ic_sup_rates[mode]; for (i = 0; i < maxrates; i++) rs->rs_rates[i] = rt->info[i].dot11Rate; rs->rs_nrates = maxrates; return 1; } static void ath_setcurmode(struct ath_softc *sc, enum ieee80211_phymode mode) { const HAL_RATE_TABLE *rt; int i; memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap)); rt = sc->sc_rates[mode]; KASSERT(rt != NULL, ("no h/w rate set for phy mode %u", mode)); for (i = 0; i < rt->rateCount; i++) sc->sc_rixmap[rt->info[i].dot11Rate & IEEE80211_RATE_VAL] = i; memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap)); for (i = 0; i < 32; i++) { u_int8_t ix = rt->rateCodeToIndex[i]; if (ix != 0xff) sc->sc_hwmap[i] = rt->info[ix].dot11Rate & IEEE80211_RATE_VAL; } sc->sc_currates = rt; sc->sc_curmode = mode; /* * All protection frames are transmited at 2Mb/s for * 11g, otherwise at 1Mb/s. * XXX select protection rate index from rate table. */ sc->sc_protrix = (mode == IEEE80211_MODE_11G ? 1 : 0); /* NB: caller is responsible for reseting rate control state */ } #ifdef AR_DEBUG static void ath_printrxbuf(struct ath_buf *bf, int done) { struct ath_desc *ds; int i; for (i = 0, ds = bf->bf_desc; i < bf->bf_nseg; i++, ds++) { printf("R%d (%p %p) %08x %08x %08x %08x %08x %08x %c\n", i, ds, (struct ath_desc *)bf->bf_daddr + i, ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, ds->ds_hw[0], ds->ds_hw[1], !done ? ' ' : (ds->ds_rxstat.rs_status == 0) ? '*' : '!'); } } static void ath_printtxbuf(struct ath_buf *bf, int done) { struct ath_desc *ds; int i; for (i = 0, ds = bf->bf_desc; i < bf->bf_nseg; i++, ds++) { printf("T%d (%p %p) %08x %08x %08x %08x %08x %08x %08x %08x %c\n", i, ds, (struct ath_desc *)bf->bf_daddr + i, ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, ds->ds_hw[0], ds->ds_hw[1], ds->ds_hw[2], ds->ds_hw[3], !done ? ' ' : (ds->ds_txstat.ts_status == 0) ? '*' : '!'); } } #endif /* AR_DEBUG */ static void ath_watchdog(struct ifnet *ifp) { struct ath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; ifp->if_timer = 0; if ((ifp->if_flags & IFF_RUNNING) == 0 || sc->sc_invalid) return; if (sc->sc_tx_timer) { if (--sc->sc_tx_timer == 0) { if_printf(ifp, "device timeout\n"); ath_reset(ifp); ifp->if_oerrors++; sc->sc_stats.ast_watchdog++; } else ifp->if_timer = 1; } ieee80211_watchdog(ic); } /* * Diagnostic interface to the HAL. This is used by various * tools to do things like retrieve register contents for * debugging. The mechanism is intentionally opaque so that * it can change frequently w/o concern for compatiblity. */ static int ath_ioctl_diag(struct ath_softc *sc, struct ath_diag *ad) { struct ath_hal *ah = sc->sc_ah; u_int id = ad->ad_id & ATH_DIAG_ID; void *indata = NULL; void *outdata = NULL; u_int32_t insize = ad->ad_in_size; u_int32_t outsize = ad->ad_out_size; int error = 0; if (ad->ad_id & ATH_DIAG_IN) { /* * Copy in data. */ indata = malloc(insize, M_TEMP, M_NOWAIT); if (indata == NULL) { error = ENOMEM; goto bad; } error = copyin(ad->ad_in_data, indata, insize); if (error) goto bad; } if (ad->ad_id & ATH_DIAG_DYN) { /* * Allocate a buffer for the results (otherwise the HAL * returns a pointer to a buffer where we can read the * results). Note that we depend on the HAL leaving this * pointer for us to use below in reclaiming the buffer; * may want to be more defensive. */ outdata = malloc(outsize, M_TEMP, M_NOWAIT); if (outdata == NULL) { error = ENOMEM; goto bad; } } if (ath_hal_getdiagstate(ah, id, indata, insize, &outdata, &outsize)) { if (outsize < ad->ad_out_size) ad->ad_out_size = outsize; if (outdata != NULL) error = copyout(outdata, ad->ad_out_data, ad->ad_out_size); } else { error = EINVAL; } bad: if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL) free(indata, M_TEMP); if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL) free(outdata, M_TEMP); return error; } static int ath_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { #define IS_RUNNING(ifp) \ ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) == (IFF_RUNNING|IFF_UP)) struct ath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ifreq *ifr = (struct ifreq *)data; int error = 0; ATH_LOCK(sc); switch (cmd) { case SIOCSIFFLAGS: if (IS_RUNNING(ifp)) { /* * To avoid rescanning another access point, * do not call ath_init() here. Instead, * only reflect promisc mode settings. */ ath_mode_init(sc); } else if (ifp->if_flags & IFF_UP) { /* * Beware of being called during attach/detach * to reset promiscuous mode. In that case we * will still be marked UP but not RUNNING. * However trying to re-init the interface * is the wrong thing to do as we've already * torn down much of our state. There's * probably a better way to deal with this. */ if (!sc->sc_invalid && ic->ic_bss != NULL) ath_init(ifp); /* XXX lose error */ } else ath_stop_locked(ifp); break; case SIOCADDMULTI: case SIOCDELMULTI: /* * The upper layer has already installed/removed * the multicast address(es), just recalculate the * multicast filter for the card. */ if (ifp->if_flags & IFF_RUNNING) ath_mode_init(sc); break; case SIOCGATHSTATS: /* NB: embed these numbers to get a consistent view */ sc->sc_stats.ast_tx_packets = ifp->if_opackets; sc->sc_stats.ast_rx_packets = ifp->if_ipackets; sc->sc_stats.ast_rx_rssi = ieee80211_getrssi(ic); ATH_UNLOCK(sc); /* * NB: Drop the softc lock in case of a page fault; * we'll accept any potential inconsisentcy in the * statistics. The alternative is to copy the data * to a local structure. */ return copyout(&sc->sc_stats, ifr->ifr_data, sizeof (sc->sc_stats)); case SIOCGATHDIAG: error = ath_ioctl_diag(sc, (struct ath_diag *) ifr); break; default: error = ieee80211_ioctl(ic, cmd, data); if (error == ENETRESET) { if (IS_RUNNING(ifp) && ic->ic_roaming != IEEE80211_ROAMING_MANUAL) ath_init(ifp); /* XXX lose error */ error = 0; } if (error == ERESTART) error = IS_RUNNING(ifp) ? ath_reset(ifp) : 0; break; } ATH_UNLOCK(sc); return error; #undef IS_UP } static int ath_sysctl_slottime(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int slottime = ath_hal_getslottime(sc->sc_ah); int error; error = sysctl_handle_int(oidp, &slottime, 0, req); if (error || !req->newptr) return error; return !ath_hal_setslottime(sc->sc_ah, slottime) ? EINVAL : 0; } static int ath_sysctl_acktimeout(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int acktimeout = ath_hal_getacktimeout(sc->sc_ah); int error; error = sysctl_handle_int(oidp, &acktimeout, 0, req); if (error || !req->newptr) return error; return !ath_hal_setacktimeout(sc->sc_ah, acktimeout) ? EINVAL : 0; } static int ath_sysctl_ctstimeout(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int ctstimeout = ath_hal_getctstimeout(sc->sc_ah); int error; error = sysctl_handle_int(oidp, &ctstimeout, 0, req); if (error || !req->newptr) return error; return !ath_hal_setctstimeout(sc->sc_ah, ctstimeout) ? EINVAL : 0; } static int ath_sysctl_softled(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; int softled = sc->sc_softled; int error; error = sysctl_handle_int(oidp, &softled, 0, req); if (error || !req->newptr) return error; if (softled > 1) softled = 1; if (softled != sc->sc_softled) { if (softled) ath_hal_gpioCfgOutput(sc->sc_ah, sc->sc_ledpin); ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, !softled); sc->sc_softled = softled; } return 0; } static int ath_sysctl_rxantenna(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int defantenna = ath_hal_getdefantenna(sc->sc_ah); int error; error = sysctl_handle_int(oidp, &defantenna, 0, req); if (!error && req->newptr) ath_hal_setdefantenna(sc->sc_ah, defantenna); return error; } static int ath_sysctl_diversity(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int diversity = sc->sc_diversity; int error; error = sysctl_handle_int(oidp, &diversity, 0, req); if (error || !req->newptr) return error; sc->sc_diversity = diversity; return !ath_hal_setdiversity(sc->sc_ah, diversity) ? EINVAL : 0; } static int ath_sysctl_diag(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int32_t diag; int error; if (!ath_hal_getdiag(sc->sc_ah, &diag)) return EINVAL; error = sysctl_handle_int(oidp, &diag, 0, req); if (error || !req->newptr) return error; return !ath_hal_setdiag(sc->sc_ah, diag) ? EINVAL : 0; } static int ath_sysctl_tpscale(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; struct ifnet *ifp = &sc->sc_if; u_int32_t scale; int error; ath_hal_gettpscale(sc->sc_ah, &scale); error = sysctl_handle_int(oidp, &scale, 0, req); if (error || !req->newptr) return error; return !ath_hal_settpscale(sc->sc_ah, scale) ? EINVAL : ath_reset(ifp); } static int ath_sysctl_tpc(SYSCTL_HANDLER_ARGS) { struct ath_softc *sc = arg1; u_int tpc = ath_hal_gettpc(sc->sc_ah); int error; error = sysctl_handle_int(oidp, &tpc, 0, req); if (error || !req->newptr) return error; return !ath_hal_settpc(sc->sc_ah, tpc) ? EINVAL : 0; } static void ath_sysctlattach(struct ath_softc *sc) { struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); ath_hal_getcountrycode(sc->sc_ah, &sc->sc_countrycode); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "countrycode", CTLFLAG_RD, &sc->sc_countrycode, 0, "EEPROM country code"); ath_hal_getregdomain(sc->sc_ah, &sc->sc_regdomain); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "regdomain", CTLFLAG_RD, &sc->sc_regdomain, 0, "EEPROM regdomain code"); sc->sc_debug = ath_debug; SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "debug", CTLFLAG_RW, &sc->sc_debug, 0, "control debugging printfs"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "slottime", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_slottime, "I", "802.11 slot time (us)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "acktimeout", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_acktimeout, "I", "802.11 ACK timeout (us)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "ctstimeout", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_ctstimeout, "I", "802.11 CTS timeout (us)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "softled", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_softled, "I", "enable/disable software LED support"); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "ledpin", CTLFLAG_RW, &sc->sc_ledpin, 0, "GPIO pin connected to LED"); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "txantenna", CTLFLAG_RW, &sc->sc_txantenna, 0, "tx antenna (0=auto)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "rxantenna", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_rxantenna, "I", "default/rx antenna"); if (sc->sc_hasdiversity) SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "diversity", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_diversity, "I", "antenna diversity"); sc->sc_txintrperiod = ATH_TXINTR_PERIOD; SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "txintrperiod", CTLFLAG_RW, &sc->sc_txintrperiod, 0, "tx descriptor batching"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "diag", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_diag, "I", "h/w diagnostic control"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tpscale", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_tpscale, "I", "tx power scaling"); if (sc->sc_hastpc) SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tpc", CTLTYPE_INT | CTLFLAG_RW, sc, 0, ath_sysctl_tpc, "I", "enable/disable per-packet TPC"); } static void ath_bpfattach(struct ath_softc *sc) { struct ifnet *ifp = &sc->sc_if; bpfattach2(ifp, DLT_IEEE802_11_RADIO, sizeof(struct ieee80211_frame) + sizeof(sc->sc_tx_th), &sc->sc_drvbpf); /* * Initialize constant fields. * XXX make header lengths a multiple of 32-bits so subsequent * headers are properly aligned; this is a kludge to keep * certain applications happy. * * NB: the channel is setup each time we transition to the * RUN state to avoid filling it in for each frame. */ sc->sc_tx_th_len = roundup(sizeof(sc->sc_tx_th), sizeof(u_int32_t)); sc->sc_tx_th.wt_ihdr.it_len = htole16(sc->sc_tx_th_len); sc->sc_tx_th.wt_ihdr.it_present = htole32(ATH_TX_RADIOTAP_PRESENT); sc->sc_rx_th_len = roundup(sizeof(sc->sc_rx_th), sizeof(u_int32_t)); sc->sc_rx_th.wr_ihdr.it_len = htole16(sc->sc_rx_th_len); sc->sc_rx_th.wr_ihdr.it_present = htole32(ATH_RX_RADIOTAP_PRESENT); } /* * Announce various information on device/driver attach. */ static void ath_announce(struct ath_softc *sc) { #define HAL_MODE_DUALBAND (HAL_MODE_11A|HAL_MODE_11B) struct ifnet *ifp = &sc->sc_if; struct ath_hal *ah = sc->sc_ah; u_int modes, cc; if_printf(ifp, "mac %d.%d phy %d.%d", ah->ah_macVersion, ah->ah_macRev, ah->ah_phyRev >> 4, ah->ah_phyRev & 0xf); /* * Print radio revision(s). We check the wireless modes * to avoid falsely printing revs for inoperable parts. * Dual-band radio revs are returned in the 5Ghz rev number. */ ath_hal_getcountrycode(ah, &cc); modes = ath_hal_getwirelessmodes(ah, cc); if ((modes & HAL_MODE_DUALBAND) == HAL_MODE_DUALBAND) { if (ah->ah_analog5GhzRev && ah->ah_analog2GhzRev) printf(" 5ghz radio %d.%d 2ghz radio %d.%d", ah->ah_analog5GhzRev >> 4, ah->ah_analog5GhzRev & 0xf, ah->ah_analog2GhzRev >> 4, ah->ah_analog2GhzRev & 0xf); else printf(" radio %d.%d", ah->ah_analog5GhzRev >> 4, ah->ah_analog5GhzRev & 0xf); } else printf(" radio %d.%d", ah->ah_analog5GhzRev >> 4, ah->ah_analog5GhzRev & 0xf); printf("\n"); if (bootverbose) { int i; for (i = 0; i <= WME_AC_VO; i++) { struct ath_txq *txq = sc->sc_ac2q[i]; if_printf(ifp, "Use hw queue %u for %s traffic\n", txq->axq_qnum, ieee80211_wme_acnames[i]); } if_printf(ifp, "Use hw queue %u for CAB traffic\n", sc->sc_cabq->axq_qnum); if_printf(ifp, "Use hw queue %u for beacons\n", sc->sc_bhalq); } #undef HAL_MODE_DUALBAND }