# # NEWCARD -- efforts at porting newconfig pccard/cardbus code to newbus # # *************** # *** WARNING *** # *************** # # USE THIS CODE AT YOUR OWN RISK. IT IS EXPERIMENTAL AND WILL LIKELY NOT # EVEN COMPILE FOR A WHILE. YOU HAVE BEEN WARNED. -- imp # # CURRENT STATUS OF CODE: NOT WORKING. Use PCCARD instead. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD$ machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident NEWCARD maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa0 device eisa0 device pci0 device pccard0 #device cardbus0 # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata2 device atadisk0 # ATA disk drives device atapicd0 # ATAPI CDROM drives device atapifd0 # ATAPI floppy drives device atapist0 # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers # A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is # sufficient for any number of installed devices. device ahb0 # EISA AHA1742 family device ahc0 # AHA2940 and onboard AIC7xxx devices device amd0 # AMD 53C974 (Teckram DC-390(T)) device dpt0 # DPT Smartcache - See LINT for options! device isp0 # Qlogic family device ncr0 # NCR/Symbios Logic device sym0 # NCR/Symbios Logic (newer chipsets) device adv0 at isa? port ? irq ? device adw0 device bt0 at isa? port ? irq ? device aha0 at isa? port ? irq ? device aic0 at isa? port ? irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. device scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI access) # RAID controllers #device amr0 # AMI MegaRAID #device mlx0 # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device pcic0 at isa? port 0x3e0 irq 10 iomem 0xd0000 #device pccbb0 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 device ppbus0 # Parallel port bus (required) device lpt0 # Printer device plip0 # TCP/IP over parallel device ppi0 # Parallel port interface device #device vpo0 # Requires scbus and da0 # PCI Ethernet NICs. device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device tx0 # SMC 9432TX (83c170 ``EPIC'') device vx0 # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. device miibus0 # MII bus support device dc0 # DEC/Intel 21143 and various workalikes device rl0 # RealTek 8129/8139 device sf0 # Adaptec AIC-6915 (``Starfire'') device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 device ste0 # Sundance ST201 (D-Link DFE-550TX) device tl0 # Texas Instruments ThunderLAN device vr0 # VIA Rhine, Rhine II device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex0 device ep0 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi0 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. device an0 # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 device fe0 at isa? port 0x300 irq ? #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 irq ? device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated # XXX BROKEN #device xe0 at isa? port? irq ? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci0 # UHCI PCI->USB interface #device ohci0 # OHCI PCI->USB interface #device usb0 # USB Bus (required) #device ugen0 # Generic #device uhid0 # "Human Interface Devices" #device ukbd0 # Keyboard #device ulpt0 # Printer #device umass0 # Disks/Mass storage - Requires scbus and da0 #device ums0 # Mouse #device aue0 # ADMtek USB ethernet #device cue0 # CATC USB ethernet #device kue0 # Kawasaki LSI USB ethernet options DDB