/*- * Copyright (c) 1994 Matt Thomas (thomas@lkg.dec.com) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software withough specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: if_de.c,v 1.8 1994/11/24 14:29:34 davidg Exp $ * */ /* * DEC DC21040 PCI Ethernet Controller * * Written by Matt Thomas * BPF support code stolen directly from if_ec.c * * This driver supports the DEC DE435 or any other PCI * board which support DC21040. */ #include "de.h" #if NDE > 0 #include #include #include #include #include #include #include #include #include #include #include #include #include "bpfilter.h" #if NBPFILTER > 0 #include #include #endif #ifdef INET #include #include #include #include #include #endif #ifdef NS #include #include #endif #include #include #include #include #if NPCI > 0 #include #endif #include #include /* * This module supports the DEC DC21040 PCI Ethernet Controller. */ typedef struct { unsigned long addr; unsigned long length; } tulip_addrvec_t; typedef struct { tulip_desc_t *ri_first; tulip_desc_t *ri_last; tulip_desc_t *ri_nextin; tulip_desc_t *ri_nextout; int ri_max; int ri_free; } tulip_ringinfo_t; typedef struct { volatile tulip_uint32_t *csr_busmode; /* CSR0 */ volatile tulip_uint32_t *csr_txpoll; /* CSR1 */ volatile tulip_uint32_t *csr_rxpoll; /* CSR2 */ volatile tulip_uint32_t *csr_rxlist; /* CSR3 */ volatile tulip_uint32_t *csr_txlist; /* CSR4 */ volatile tulip_uint32_t *csr_status; /* CSR5 */ volatile tulip_uint32_t *csr_command; /* CSR6 */ volatile tulip_uint32_t *csr_intr; /* CSR7 */ volatile tulip_uint32_t *csr_missed_frame; /* CSR8 */ volatile tulip_sint32_t *csr_enetrom; /* CSR9 */ volatile tulip_uint32_t *csr_reserved; /* CSR10 */ volatile tulip_uint32_t *csr_full_duplex; /* CSR11 */ volatile tulip_uint32_t *csr_sia_status; /* CSR12 */ volatile tulip_uint32_t *csr_sia_connectivity; /* CSR13 */ volatile tulip_uint32_t *csr_sia_tx_rx; /* CSR14 */ volatile tulip_uint32_t *csr_sia_general; /* CSR15 */ } tulip_regfile_t; /* * The DC21040 has a stupid restriction in that the receive * buffers must be longword aligned. But since Ethernet * headers are not a multiple of longwords in size this forces * the data to non-longword aligned. Since IP requires the * data to be longword aligned, we need to copy it after it has * been DMA'ed in our memory. * * Since we have to copy it anyways, we might as well as allocate * dedicated receive space for the input. This allows to use a * small receive buffer size and more ring entries to be able to * better keep with a flood of tiny Ethernet packets. * * The receive space MUST ALWAYS be a multiple of the page size. * And the number of receive descriptors multiplied by the size * of the receive buffers must equal the recevive space. This * is so that we can manipulate the page tables so that even if a * packet wraps around the end of the receive space, we can * treat it as virtually contiguous. */ #define TULIP_RXBUFSIZE 512 #define TULIP_RXDESCS 128 #define TULIP_RXSPACE (TULIP_RXBUFSIZE * TULIP_RXDESCS) #define TULIP_TXDESCS 128 typedef struct { struct arpcom tulip_ac; tulip_regfile_t tulip_csrs; vm_offset_t tulip_rxspace; unsigned tulip_flags; #define TULIP_WANTSETUP 0x01 #define TULIP_WANTHASH 0x02 #define TULIP_DOINGSETUP 0x04 #define TULIP_ALTPHYS 0x08 /* use AUI */ unsigned char tulip_rombuf[32]; tulip_uint32_t tulip_setupbuf[192/sizeof(tulip_uint32_t)]; tulip_uint32_t tulip_setupdata[192/sizeof(tulip_uint32_t)]; tulip_uint32_t tulip_intrmask; tulip_uint32_t tulip_cmdmode; tulip_uint32_t tulip_revinfo; #if NBPFILTER > 0 caddr_t tulip_bpf; /* BPF context */ #endif struct ifqueue tulip_txq; tulip_ringinfo_t tulip_rxinfo; tulip_ringinfo_t tulip_txinfo; } tulip_softc_t; #ifndef IFF_ALTPHYS #define IFF_ALTPHYS IFF_LINK0 /* In case it isn't defined */ #endif typedef enum { TULIP_DC21040, TULIP_DC21140 } tulip_chipid_t; const char *tulip_chipdescs[] = { "DC21040 [10Mb/s]", "DC21140 [100Mb/s]", }; tulip_softc_t *tulips[NDE]; tulip_chipid_t tulip_chipids[NDE]; #define tulip_if tulip_ac.ac_if #define tulip_unit tulip_ac.ac_if.if_unit #define tulip_name tulip_ac.ac_if.if_name #define tulip_hwaddr tulip_ac.ac_enaddr #define TULIP_CRC32_POLY 0xEDB88320UL /* CRC-32 Poly -- Little Endian */ #define TULIP_CHECK_RXCRC 0 #define TULIP_MAX_TXSEG 30 #define TULIP_ADDREQUAL(a1, a2) \ (((u_short *)a1)[0] == ((u_short *)a2)[0] \ && ((u_short *)a1)[1] == ((u_short *)a2)[1] \ && ((u_short *)a1)[2] == ((u_short *)a2)[2]) #define TULIP_ADDRBRDCST(a1) \ (((u_short *)a1)[0] == 0xFFFFU \ && ((u_short *)a1)[1] == 0xFFFFU \ && ((u_short *)a1)[2] == 0xFFFFU) static void tulip_start(struct ifnet *ifp); static void tulip_addr_filter(tulip_softc_t *sc); #if __FreeBSD__ > 1 #define TULIP_IFRESET_ARGS int unit #define TULIP_RESET(sc) tulip_reset((sc)->tulip_unit) #else #define TULIP_IFRESET_ARGS int unit, int uban #define TULIP_RESET(sc) tulip_reset((sc)->tulip_unit, 0) #endif static void tulip_reset( TULIP_IFRESET_ARGS) { tulip_softc_t *sc = tulips[unit]; tulip_ringinfo_t *ri; tulip_desc_t *di; vm_offset_t vmoff; *sc->tulip_csrs.csr_busmode = TULIP_BUSMODE_SWRESET; DELAY(10); /* Wait 10 microsends (actually 50 PCI cycles but at 33MHz that comes to two microseconds but wait a bit longer anyways) */ /* * Use the */ *sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_RESET; if (sc->tulip_if.if_flags & IFF_ALTPHYS) { if ((sc->tulip_flags & TULIP_ALTPHYS) == 0) printf("%s%d: enabling Thinwire/AUI port\n", sc->tulip_if.if_name, sc->tulip_if.if_unit); *sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_AUI; sc->tulip_flags |= TULIP_ALTPHYS; } else { if (sc->tulip_flags & TULIP_ALTPHYS) printf("%s%d: enabling 10baseT/UTP port\n", sc->tulip_if.if_name, sc->tulip_if.if_unit); *sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET; sc->tulip_flags &= ~TULIP_ALTPHYS; } *sc->tulip_csrs.csr_txlist = vtophys(&sc->tulip_txinfo.ri_first[0]); *sc->tulip_csrs.csr_rxlist = vtophys(&sc->tulip_rxinfo.ri_first[0]); *sc->tulip_csrs.csr_intr = 0; *sc->tulip_csrs.csr_busmode = 0x4800; sc->tulip_txq.ifq_maxlen = TULIP_TXDESCS; /* * Free all the mbufs that were on the transmit ring. */ for (;;) { struct mbuf *m; IF_DEQUEUE(&sc->tulip_txq, m); if (m == NULL) break; m_freem(m); } ri = &sc->tulip_txinfo; ri->ri_nextin = ri->ri_nextout = ri->ri_first; ri->ri_free = ri->ri_max; for (di = ri->ri_first; di < ri->ri_last; di++) di->d_status = 0; /* * We need to collect all the mbufs were on the * receive ring before we reinit it either to put * them back on or to know if we have to allocate * more. */ ri = &sc->tulip_rxinfo; ri->ri_nextin = ri->ri_nextout = ri->ri_first; ri->ri_free = ri->ri_max; for (vmoff = vtophys(sc->tulip_rxspace), di = ri->ri_first; di < ri->ri_last; di++, vmoff += TULIP_RXBUFSIZE) { di->d_status |= TULIP_DSTS_OWNER; di->d_length1 = TULIP_RXBUFSIZE; di->d_addr1 = vmoff; di->d_length2 = 0; di->d_addr2 = 0; } sc->tulip_intrmask = TULIP_STS_NORMALINTR|TULIP_STS_RXINTR|TULIP_STS_TXINTR |TULIP_STS_ABNRMLINTR|TULIP_STS_SYSERROR|TULIP_STS_TXSTOPPED |TULIP_STS_TXBABBLE|TULIP_STS_LINKFAIL|TULIP_STS_RXSTOPPED; sc->tulip_flags &= ~(TULIP_DOINGSETUP|TULIP_WANTSETUP); tulip_addr_filter(sc); } static void tulip_init( int unit) { tulip_softc_t *sc = tulips[unit]; if (sc->tulip_if.if_flags & IFF_UP) { sc->tulip_if.if_flags |= IFF_RUNNING; if (sc->tulip_if.if_flags & IFF_PROMISC) { sc->tulip_cmdmode |= TULIP_CMD_PROMISCUOUS; } else { sc->tulip_cmdmode &= ~TULIP_CMD_PROMISCUOUS; if (sc->tulip_if.if_flags & IFF_ALLMULTI) { sc->tulip_cmdmode |= TULIP_CMD_ALLMULTI; } else { sc->tulip_cmdmode &= ~TULIP_CMD_ALLMULTI; } } sc->tulip_cmdmode |= TULIP_CMD_TXRUN; if ((sc->tulip_flags & TULIP_WANTSETUP) == 0) { sc->tulip_cmdmode |= TULIP_CMD_RXRUN; sc->tulip_intrmask |= TULIP_STS_RXSTOPPED; } else { sc->tulip_intrmask &= ~TULIP_STS_RXSTOPPED; tulip_start(&sc->tulip_if); } sc->tulip_cmdmode |= TULIP_CMD_THRSHLD160; *sc->tulip_csrs.csr_intr = sc->tulip_intrmask; *sc->tulip_csrs.csr_command = sc->tulip_cmdmode; } else { TULIP_RESET(sc); sc->tulip_if.if_flags &= ~IFF_RUNNING; } } #if TULIP_CHECK_RXCRC static unsigned tulip_crc32( u_char *addr, int len) { unsigned int crc = 0xFFFFFFFF; static unsigned int crctbl[256]; int idx; static int done; /* * initialize the multicast address CRC table */ for (idx = 0; !done && idx < 256; idx++) { unsigned int tmp = idx; tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ tmp = (tmp >> 1) ^ (tmp & 1 ? TULIP_CRC32_POLY : 0); /* XOR */ crctbl[idx] = tmp; } done = 1; while (len-- > 0) crc = (crc >> 8) ^ crctbl[*addr++] ^ crctbl[crc & 0xFF]; return crc; } #endif static void tulip_rx_intr( tulip_softc_t *sc) { tulip_ringinfo_t *ri = &sc->tulip_rxinfo; struct ifnet *ifp = &sc->tulip_if; for (;;) { tulip_desc_t *eop; int total_len, ndescs; caddr_t bufaddr = (caddr_t) sc->tulip_rxspace; for (ndescs = 1, eop = ri->ri_nextin;; ndescs++) { if (((volatile tulip_desc_t *) eop)->d_status & TULIP_DSTS_OWNER) return; if (eop->d_status & TULIP_DSTS_RxLASTDESC) break; if (++eop == ri->ri_last) eop = ri->ri_first; } bufaddr += TULIP_RXBUFSIZE * (ri->ri_nextin - ri->ri_first); total_len = ((eop->d_status >> 16) & 0x7FF) - 4; if ((eop->d_status & TULIP_DSTS_ERRSUM) == 0) { struct ether_header eh; struct mbuf *m; #if TULIP_CHECK_RXCRC unsigned crc = tulip_crc32(bufaddr, total_len); if (~crc != *((unsigned *) &bufaddr[total_len])) { printf("de0: bad rx crc: %08x [rx] != %08x\n", *((unsigned *) &bufaddr[total_len]), ~crc); goto next; } #endif eh = *(struct ether_header *) bufaddr; #if NBPFILTER > 0 if (sc->tulip_bpf != NULL) { bpf_tap(sc->tulip_bpf, bufaddr, total_len); if ((eh.ether_dhost[0] & 1) == 0 && !TULIP_ADDREQUAL(eh.ether_dhost, sc->tulip_ac.ac_enaddr)) goto next; } else if (!TULIP_ADDREQUAL(eh.ether_dhost, sc->tulip_ac.ac_enaddr) && !TULIP_ADDRBRDCST(eh.ether_dhost)) { goto next; } #endif MGETHDR(m, M_DONTWAIT, MT_DATA); if (m != NULL) { m->m_pkthdr.rcvif = ifp; total_len -= sizeof(eh); if (total_len > MHLEN) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); ifp->if_ierrors++; goto next; } } bcopy(bufaddr + sizeof(eh), mtod(m, caddr_t), total_len); m->m_len = m->m_pkthdr.len = total_len; ether_input(ifp, &eh, m); } else { ifp->if_ierrors++; } } else { ifp->if_ierrors++; } next: ifp->if_ipackets++; while (ndescs-- > 0) { ri->ri_nextin->d_status |= TULIP_DSTS_OWNER; if (++ri->ri_nextin == ri->ri_last) ri->ri_nextin = ri->ri_first; } } } static int tulip_tx_intr( tulip_softc_t *sc) { tulip_ringinfo_t *ri = &sc->tulip_txinfo; struct mbuf *m; int xmits = 0; while (ri->ri_free < ri->ri_max) { if (((volatile tulip_desc_t *) ri->ri_nextin)->d_status & TULIP_DSTS_OWNER) break; if (ri->ri_nextin->d_flag & TULIP_DFLAG_TxLASTSEG) { if (ri->ri_nextin->d_flag & TULIP_DFLAG_TxSETUPPKT) { /* * We've just finished processing a setup packet. * Mark that we can finished it. If there's not * another pending, startup the TULIP receiver. * Make sure we ack the RXSTOPPED so we won't get * an abormal interrupt indication. */ sc->tulip_flags &= ~TULIP_DOINGSETUP; if ((sc->tulip_flags & TULIP_WANTSETUP) == 0) { sc->tulip_cmdmode |= TULIP_CMD_RXRUN; sc->tulip_intrmask |= TULIP_STS_RXSTOPPED; *sc->tulip_csrs.csr_status = TULIP_STS_RXSTOPPED; *sc->tulip_csrs.csr_command = sc->tulip_cmdmode; *sc->tulip_csrs.csr_intr = sc->tulip_intrmask; } } else { IF_DEQUEUE(&sc->tulip_txq, m); m_freem(m); sc->tulip_if.if_collisions += (ri->ri_nextin->d_status & TULIP_DSTS_TxCOLLMASK) >> TULIP_DSTS_V_TxCOLLCNT; if (ri->ri_nextin->d_status & TULIP_DSTS_ERRSUM) sc->tulip_if.if_oerrors++; xmits++; } } if (++ri->ri_nextin == ri->ri_last) ri->ri_nextin = ri->ri_first; ri->ri_free++; sc->tulip_if.if_flags &= ~IFF_OACTIVE; } sc->tulip_if.if_opackets += xmits; return xmits; } static int tulip_txsegment( tulip_softc_t *sc, struct mbuf *m, tulip_addrvec_t *avp, size_t maxseg) { int segcnt; for (segcnt = 0; m; m = m->m_next) { int len = m->m_len; caddr_t addr = mtod(m, caddr_t); unsigned clsize = CLBYTES - (((u_long) addr) & (CLBYTES-1)); while (len > 0) { unsigned slen = min(len, clsize); if (segcnt < maxseg) { avp->addr = vtophys(addr); avp->length = slen; } len -= slen; addr += slen; clsize = CLBYTES; avp++; segcnt++; } } if (segcnt >= maxseg) { printf("%s%d: tulip_txsegment: extremely fragmented packet encountered (%d segments)\n", sc->tulip_name, sc->tulip_unit, segcnt); return -1; } avp->addr = 0; avp->length = 0; return segcnt; } static void tulip_start( struct ifnet *ifp) { tulip_softc_t *sc = (tulip_softc_t *) ifp; struct ifqueue *ifq = &ifp->if_snd; tulip_ringinfo_t *ri = &sc->tulip_txinfo; tulip_desc_t *sop, *eop; struct mbuf *m; tulip_addrvec_t addrvec[TULIP_MAX_TXSEG+1], *avp; int segcnt; tulip_uint32_t d_status; if ((ifp->if_flags & IFF_RUNNING) == 0) return; for (;;) { if (sc->tulip_flags & TULIP_WANTSETUP) { if ((sc->tulip_flags & TULIP_DOINGSETUP) || ri->ri_free == 1) { ifp->if_flags |= IFF_OACTIVE; return; } bcopy(sc->tulip_setupdata, sc->tulip_setupbuf, sizeof(sc->tulip_setupbuf)); sc->tulip_flags &= ~TULIP_WANTSETUP; sc->tulip_flags |= TULIP_DOINGSETUP; ri->ri_free--; ri->ri_nextout->d_flag &= TULIP_DFLAG_ENDRING|TULIP_DFLAG_CHAIN; ri->ri_nextout->d_flag |= TULIP_DFLAG_TxFIRSTSEG|TULIP_DFLAG_TxLASTSEG |TULIP_DFLAG_TxSETUPPKT|TULIP_DFLAG_TxWANTINTR; if (sc->tulip_flags & TULIP_WANTHASH) ri->ri_nextout->d_flag |= TULIP_DFLAG_TxHASHFILT; ri->ri_nextout->d_length1 = sizeof(sc->tulip_setupbuf); ri->ri_nextout->d_addr1 = vtophys(sc->tulip_setupbuf); ri->ri_nextout->d_length2 = 0; ri->ri_nextout->d_addr2 = 0; ri->ri_nextout->d_status = TULIP_DSTS_OWNER; *sc->tulip_csrs.csr_txpoll = 1; /* * Advance the ring for the next transmit packet. */ if (++ri->ri_nextout == ri->ri_last) ri->ri_nextout = ri->ri_first; } IF_DEQUEUE(ifq, m); if (m == NULL) break; /* * First find out how many and which different pages * the mbuf data occupies. Then check to see if we * have enough descriptor space in our transmit ring * to actually send it. */ segcnt = tulip_txsegment(sc, m, addrvec, min(ri->ri_max - 1, TULIP_MAX_TXSEG)); if (segcnt < 0) { struct mbuf *m0; MGETHDR(m0, M_DONTWAIT, MT_DATA); if (m0 != NULL) { if (m->m_pkthdr.len > MHLEN) { MCLGET(m0, M_DONTWAIT); if ((m0->m_flags & M_EXT) == 0) { m_freem(m); continue; } } m_copydata(m, 0, m0->m_pkthdr.len, mtod(m0, caddr_t)); m0->m_pkthdr.len = m0->m_len = m->m_pkthdr.len; m_freem(m); IF_PREPEND(ifq, m0); continue; } else { m_freem(m); continue; } } if (ri->ri_free - 2 <= (segcnt + 1) >> 1) break; ri->ri_free -= (segcnt + 1) >> 1; /* * Now we fill in our transmit descriptors. This is * a bit reminiscent of going on the Ark two by two * since each descriptor for the TULIP can describe * two buffers. So we advance through the address * vector two entries at a time to to fill each * descriptor. Clear the first and last segment bits * in each descriptor (actually just clear everything * but the end-of-ring or chain bits) to make sure * we don't get messed up by previously sent packets. */ sop = ri->ri_nextout; d_status = 0; avp = addrvec; do { eop = ri->ri_nextout; eop->d_flag &= TULIP_DFLAG_ENDRING|TULIP_DFLAG_CHAIN; eop->d_status = d_status; eop->d_addr1 = avp->addr; eop->d_length1 = avp->length; avp++; eop->d_addr2 = avp->addr; eop->d_length2 = avp->length; avp++; d_status = TULIP_DSTS_OWNER; if (++ri->ri_nextout == ri->ri_last) ri->ri_nextout = ri->ri_first; } while ((segcnt -= 2) > 0); #if NBPFILTER > 0 if (sc->tulip_bpf != NULL) bpf_mtap(sc->tulip_bpf, m); #endif /* * The descriptors have been filled in. Mark the first * and last segments, indicate we want a transmit complete * interrupt, give the descriptors to the TULIP, and tell * it to transmit! */ IF_ENQUEUE(&sc->tulip_txq, m); eop->d_flag |= TULIP_DFLAG_TxLASTSEG|TULIP_DFLAG_TxWANTINTR; sop->d_flag |= TULIP_DFLAG_TxFIRSTSEG; sop->d_status = TULIP_DSTS_OWNER; *sc->tulip_csrs.csr_txpoll = 1; } if (m != NULL) { ifp->if_flags |= IFF_OACTIVE; IF_PREPEND(ifq, m); } } static int tulip_intr( tulip_softc_t *sc) { tulip_uint32_t csr; while ((csr = *sc->tulip_csrs.csr_status) & (TULIP_STS_NORMALINTR|TULIP_STS_ABNRMLINTR)) { *sc->tulip_csrs.csr_status = csr & sc->tulip_intrmask; if (csr & TULIP_STS_SYSERROR) { if ((csr & TULIP_STS_ERRORMASK) == TULIP_STS_ERR_PARITY) { TULIP_RESET(sc); tulip_init(sc->tulip_unit); return 1; } } if (csr & TULIP_STS_ABNRMLINTR) { printf("%s%d: abnormal interrupt: 0x%05x [0x%05x]\n", sc->tulip_name, sc->tulip_unit, csr, csr & sc->tulip_intrmask); *sc->tulip_csrs.csr_command = sc->tulip_cmdmode; } if (csr & TULIP_STS_RXINTR) tulip_rx_intr(sc); if (sc->tulip_txinfo.ri_free < sc->tulip_txinfo.ri_max) { tulip_tx_intr(sc); tulip_start(&sc->tulip_if); } } return 1; } /* * This is the standard method of reading the DEC Address ROMS. */ static int tulip_read_macaddr( tulip_softc_t *sc) { int cksum, rom_cksum, idx; tulip_sint32_t csr; unsigned char tmpbuf[8]; static u_char testpat[] = { 0xFF, 0, 0x55, 0xAA, 0xFF, 0, 0x55, 0xAA }; *sc->tulip_csrs.csr_enetrom = 1; for (idx = 0; idx < 32; idx++) { int cnt = 0; while ((csr = *sc->tulip_csrs.csr_enetrom) < 0 && cnt < 10000) cnt++; sc->tulip_rombuf[idx] = csr & 0xFF; } if (bcmp(&sc->tulip_rombuf[0], &sc->tulip_rombuf[16], 8) != 0) { /* * Some folks don't use the standard ethernet rom format * but instead just put the address in the first 6 bytes * of the rom and let the rest be all 0xffs. (Can we say * ZNYX???) */ for (idx = 6; idx < 32; idx++) { if (sc->tulip_rombuf[idx] != 0xFF) return -4; } /* * Make sure the address is not multicast or locally assigned * that the OUI is not 00-00-00. */ if ((sc->tulip_rombuf[0] & 3) != 0) return -4; if (sc->tulip_rombuf[0] == 0 && sc->tulip_rombuf[1] == 0 && sc->tulip_rombuf[2] == 0) return -4; bcopy(sc->tulip_rombuf, sc->tulip_hwaddr, 6); return 0; } if (bcmp(&sc->tulip_rombuf[24], testpat, 8) != 0) return -3; tmpbuf[0] = sc->tulip_rombuf[15]; tmpbuf[1] = sc->tulip_rombuf[14]; tmpbuf[2] = sc->tulip_rombuf[13]; tmpbuf[3] = sc->tulip_rombuf[12]; tmpbuf[4] = sc->tulip_rombuf[11]; tmpbuf[5] = sc->tulip_rombuf[10]; tmpbuf[6] = sc->tulip_rombuf[9]; tmpbuf[7] = sc->tulip_rombuf[8]; if (bcmp(&sc->tulip_rombuf[0], tmpbuf, 8) != 0) return -2; bcopy(sc->tulip_rombuf, sc->tulip_hwaddr, 6); cksum = *(u_short *) &sc->tulip_hwaddr[0]; cksum *= 2; if (cksum > 65535) cksum -= 65535; cksum += *(u_short *) &sc->tulip_hwaddr[2]; if (cksum > 65535) cksum -= 65535; cksum *= 2; if (cksum > 65535) cksum -= 65535; cksum += *(u_short *) &sc->tulip_hwaddr[4]; if (cksum >= 65535) cksum -= 65535; rom_cksum = *(u_short *) &sc->tulip_rombuf[6]; if (cksum != rom_cksum) return -1; return 0; } static unsigned tulip_mchash( unsigned char *mca) { u_int idx, bit, data, crc = 0xFFFFFFFFUL; #ifdef __alpha for (data = *(__unaligned u_long *) mca, bit = 0; bit < 48; bit++, data >>= 1) crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0); #else for (idx = 0; idx < 6; idx++) for (data = *mca++, bit = 0; bit < 8; bit++, data >>= 1) crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0); #endif return crc & 0x1FF; } static void tulip_addr_filter( tulip_softc_t *sc) { tulip_uint32_t *sp = sc->tulip_setupdata; struct ether_multistep step; struct ether_multi *enm; int i; sc->tulip_flags &= ~TULIP_WANTHASH; sc->tulip_flags |= TULIP_WANTSETUP; sc->tulip_cmdmode &= ~TULIP_CMD_RXRUN; sc->tulip_intrmask &= ~TULIP_STS_RXSTOPPED; if (sc->tulip_ac.ac_multicnt > 14) { unsigned hash; /* * If we have more than 14 multicasts, we have * go into hash perfect mode (512 bit multicast * hash and one perfect hardware). */ bzero(sc->tulip_setupdata, sizeof(sc->tulip_setupdata)); hash = tulip_mchash(etherbroadcastaddr); sp[hash >> 4] |= 1 << (hash & 0xF); ETHER_FIRST_MULTI(step, &sc->tulip_ac, enm); while (enm != NULL) { hash = tulip_mchash(enm->enm_addrlo); sp[hash >> 4] |= 1 << (hash & 0xF); ETHER_NEXT_MULTI(step, enm); } sc->tulip_cmdmode |= TULIP_WANTHASH; sp[40] = ((u_short *) sc->tulip_ac.ac_enaddr)[0]; sp[41] = ((u_short *) sc->tulip_ac.ac_enaddr)[1]; sp[42] = ((u_short *) sc->tulip_ac.ac_enaddr)[2]; } else { /* * Else can get perfect filtering for 16 addresses. */ i = 0; ETHER_FIRST_MULTI(step, &sc->tulip_ac, enm); for (; enm != NULL; i++) { *sp++ = ((u_short *) enm->enm_addrlo)[0]; *sp++ = ((u_short *) enm->enm_addrlo)[1]; *sp++ = ((u_short *) enm->enm_addrlo)[2]; ETHER_NEXT_MULTI(step, enm); } /* * If an IP address is enabled, turn on broadcast */ if (sc->tulip_ac.ac_ipaddr.s_addr != 0) { i++; *sp++ = 0xFFFF; *sp++ = 0xFFFF; *sp++ = 0xFFFF; } /* * Pad the rest with our hardware address */ for (; i < 16; i++) { *sp++ = ((u_short *) sc->tulip_ac.ac_enaddr)[0]; *sp++ = ((u_short *) sc->tulip_ac.ac_enaddr)[1]; *sp++ = ((u_short *) sc->tulip_ac.ac_enaddr)[2]; } } } static int tulip_ioctl( struct ifnet *ifp, int cmd, caddr_t data) { tulip_softc_t *sc = tulips[ifp->if_unit]; struct ifaddr *ifa = (struct ifaddr *)data; struct ifreq *ifr = (struct ifreq *) data; int s, error = 0; s = splimp(); switch (cmd) { case SIOCSIFADDR: { ifp->if_flags |= IFF_UP; switch(ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: { ((struct arpcom *)ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr; tulip_addr_filter(sc); /* reset multicast filtering */ (*ifp->if_init)(ifp->if_unit); arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr); break; } #endif /* INET */ #ifdef NS /* This magic copied from if_is.c; I don't use XNS, * so I have no way of telling if this actually * works or not. */ case AF_NS: { struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) { ina->x_host = *(union ns_host *)(sc->tulip_ac.ac_enaddr); } else { ifp->if_flags &= ~IFF_RUNNING; bcopy((caddr_t)ina->x_host.c_host, (caddr_t)sc->tulip_ac.ac_enaddr, sizeof sc->tulip_ac.ac_enaddr); } (*ifp->if_init)(ifp->if_unit); break; } #endif /* NS */ default: { (*ifp->if_init)(ifp->if_unit); break; } } break; } case SIOCSIFFLAGS: { /* * Changing the connection forces a reset. */ if (sc->tulip_flags & TULIP_ALTPHYS) { if ((ifp->if_flags & IFF_ALTPHYS) == 0) TULIP_RESET(sc); } else { if (ifp->if_flags & IFF_ALTPHYS) TULIP_RESET(sc); } (*ifp->if_init)(ifp->if_unit); break; } case SIOCADDMULTI: case SIOCDELMULTI: { /* * Update multicast listeners */ if (cmd == SIOCADDMULTI) error = ether_addmulti(ifr, &sc->tulip_ac); else error = ether_delmulti(ifr, &sc->tulip_ac); if (error == ENETRESET) { tulip_addr_filter(sc); /* reset multicast filtering */ (*ifp->if_init)(ifp->if_unit); error = 0; } break; } case SIOCSIFMTU: /* * Set the interface MTU. */ if (ifr->ifr_mtu > ETHERMTU) { error = EINVAL; } else { ifp->if_mtu = ifr->ifr_mtu; } break; default: { error = EINVAL; break; } } splx(s); return error; } static void tulip_attach( tulip_softc_t *sc) { struct ifnet *ifp = &sc->tulip_if; int cnt; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST; *sc->tulip_csrs.csr_sia_connectivity = 0; *sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET; for (cnt = 0; cnt < 240000; cnt++) { if ((*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) == 0) break; DELAY(10); } if (*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) { ifp->if_flags |= IFF_ALTPHYS; } else { sc->tulip_flags |= TULIP_ALTPHYS; } TULIP_RESET(sc); ifp->if_init = tulip_init; ifp->if_ioctl = tulip_ioctl; ifp->if_output = ether_output; ifp->if_reset = tulip_reset; ifp->if_start = tulip_start; printf("%s%d: %s pass %d.%d ethernet address %s\n", sc->tulip_name, sc->tulip_unit, tulip_chipdescs[tulip_chipids[sc->tulip_unit]], (sc->tulip_revinfo & 0xF0) >> 4, sc->tulip_revinfo & 0x0F, ether_sprintf(sc->tulip_hwaddr)); if_attach(ifp); #if NBPFILTER > 0 bpfattach(&sc->tulip_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif } static void tulip_initcsrs( tulip_softc_t *sc, volatile tulip_uint32_t *va_csrs, size_t csr_size) { sc->tulip_csrs.csr_busmode = va_csrs + 0 * csr_size; sc->tulip_csrs.csr_txpoll = va_csrs + 1 * csr_size; sc->tulip_csrs.csr_rxpoll = va_csrs + 2 * csr_size; sc->tulip_csrs.csr_rxlist = va_csrs + 3 * csr_size; sc->tulip_csrs.csr_txlist = va_csrs + 4 * csr_size; sc->tulip_csrs.csr_status = va_csrs + 5 * csr_size; sc->tulip_csrs.csr_command = va_csrs + 6 * csr_size; sc->tulip_csrs.csr_intr = va_csrs + 7 * csr_size; sc->tulip_csrs.csr_missed_frame = va_csrs + 8 * csr_size; sc->tulip_csrs.csr_enetrom = va_csrs + 9 * csr_size; sc->tulip_csrs.csr_reserved = va_csrs + 10 * csr_size; sc->tulip_csrs.csr_full_duplex = va_csrs + 11 * csr_size; sc->tulip_csrs.csr_sia_status = va_csrs + 12 * csr_size; sc->tulip_csrs.csr_sia_connectivity = va_csrs + 13 * csr_size; sc->tulip_csrs.csr_sia_tx_rx = va_csrs + 14 * csr_size; sc->tulip_csrs.csr_sia_general = va_csrs + 15 * csr_size; } static void tulip_initring( tulip_softc_t *sc, tulip_ringinfo_t *ri, tulip_desc_t *descs, int ndescs) { ri->ri_max = ndescs; ri->ri_first = descs; ri->ri_last = ri->ri_first + ri->ri_max; bzero((caddr_t) ri->ri_first, sizeof(ri->ri_first[0]) * ri->ri_max); ri->ri_last[-1].d_flag = TULIP_DFLAG_ENDRING; } #if NPCI > 0 /* * This is the PCI configuration support. Since the DC21040 is available * on both EISA and PCI boards, one must be careful in how defines the * DC21040 in the config file. */ static char* tulip_pci_probe (pcici_t config_id, pcidi_t device_id); static void tulip_pci_attach(pcici_t config_id, int unit); static u_long tulip_count; struct pci_driver dedevice = { tulip_pci_probe, tulip_pci_attach, &tulip_count, }; #define PCI_CFID 0x00 /* Configuration ID */ #define PCI_CFCS 0x04 /* Configurtion Command/Status */ #define PCI_CFRV 0x08 /* Configuration Revision */ #define PCI_CFLT 0x0c /* Configuration Latency Timer */ #define PCI_CBIO 0x10 /* Configuration Base IO Address */ #define PCI_CBMA 0x14 /* Configuration Base Memory Address */ #define PCI_CFIT 0x3c /* Configuration Interrupt */ #define PCI_CFDA 0x40 /* Configuration Driver Area */ #define TULIP_PCI_CSRSIZE (8 / sizeof(tulip_uint32_t)) static char* tulip_pci_probe( pcici_t config_id, pcidi_t device_id) { int idx; for (idx = 0; idx < NDE; idx++) { if (tulips[idx] == NULL) { if (device_id == 0x00021011ul) { tulip_chipids[idx] = TULIP_DC21040; return "Digital DC21040 Ethernet"; } if (device_id == 0x00091011ul) { tulip_chipids[idx] = TULIP_DC21140; return "Digital DC21140 Fast Ethernet"; } return NULL; } } return NULL; } static void tulip_pci_attach( pcici_t config_id, int unit) { tulip_softc_t *sc; int retval, idx; vm_offset_t va_csrs, pa_csrs; tulip_desc_t *rxdescs, *txdescs; sc = (tulip_softc_t *) malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT); if (sc == NULL) return; rxdescs = (tulip_desc_t *) malloc(sizeof(tulip_desc_t) * TULIP_RXDESCS, M_DEVBUF, M_NOWAIT); if (rxdescs == NULL) { free((caddr_t) sc, M_DEVBUF); return; } txdescs = (tulip_desc_t *) malloc(sizeof(tulip_desc_t) * TULIP_TXDESCS, M_DEVBUF, M_NOWAIT); if (txdescs == NULL) { free((caddr_t) rxdescs, M_DEVBUF); free((caddr_t) sc, M_DEVBUF); return; } bzero(sc, sizeof(sc)); /* Zero out the softc*/ sc->tulip_rxspace = kmem_alloc(kernel_map, TULIP_RXSPACE + NBPG); /* * We've allocated an extra page of receive space so we can double map * the first page of the receive space into the page after the last page * of the receive space. This means that even if a receive wraps around * the end of the receive space, it will still virtually contiguous and * that greatly simplifies the recevie logic. */ pmap_enter(pmap_kernel(), sc->tulip_rxspace + TULIP_RXSPACE, vtophys(sc->tulip_rxspace), VM_PROT_READ, TRUE); sc->tulip_unit = unit; sc->tulip_name = "de"; retval = pci_map_mem(config_id, PCI_CBMA, &va_csrs, &pa_csrs); if (!retval) { kmem_free(kernel_map, sc->tulip_rxspace, TULIP_RXSPACE + NBPG); free((caddr_t) txdescs, M_DEVBUF); free((caddr_t) rxdescs, M_DEVBUF); free((caddr_t) sc, M_DEVBUF); return; } tulips[unit] = sc; tulip_initcsrs(sc, (volatile tulip_uint32_t *) va_csrs, TULIP_PCI_CSRSIZE); tulip_initring(sc, &sc->tulip_rxinfo, rxdescs, TULIP_RXDESCS); tulip_initring(sc, &sc->tulip_txinfo, txdescs, TULIP_TXDESCS); sc->tulip_revinfo = pci_conf_read(config_id, PCI_CFRV); if ((retval = tulip_read_macaddr(sc)) < 0) { printf("de%d: can't read ENET ROM (why=%d) (", sc->tulip_unit, retval); for (idx = 0; idx < 32; idx++) printf("%02x", sc->tulip_rombuf[idx]); printf("\n"); printf("%s%d: %s pass %d.%d ethernet address %s\n", sc->tulip_name, sc->tulip_unit, tulip_chipdescs[tulip_chipids[sc->tulip_unit]], (sc->tulip_revinfo & 0xF0) >> 4, sc->tulip_revinfo & 0x0F, "unknown"); } else { TULIP_RESET(sc); tulip_attach(sc); pci_map_int (config_id, tulip_intr, (void*) sc, &net_imask); } } #endif /* NPCI > 0 */ #endif /* NDE > 0 */