#!/bin/sh - # # Copyright (c) 1990 The Regents of the University of California. # All rights reserved. # # Written and contributed by W. Jolitz 12/90 # # Redistribution and use in source and binary forms are permitted provided # that: (1) source distributions retain this entire copyright notice and # comment, and (2) distributions including binaries display the following # acknowledgement: ``This product includes software developed by the # University of California, Berkeley and its contributors'' in the # documentation or other materials provided with the distribution and in # all advertising materials mentioning features or use of this software. # Neither the name of the University nor the names of its contributors may # be used to endorse or promote products derived from this software without # specific prior written permission. # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. # # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90 # # Device "make" file. Valid arguments: # all makes all known devices, standard number of units (or close) # std standard devices # local configuration specific devices # # Tapes: # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape # st* "NEW type scsi tapes" (old driver uses the # block devices of the disks to get access) # # Disks: # wd* "winchester" disk drives (ST506,IDE,ESDI,RLL,...) # fd* "floppy" disk drives (3 1/2", 5 1/4") # sd* "scsi disks" # cd* "cdrom disks" # # Console ports: # pc* devices for stock pccons # vty* virtual console devices for syscons/pcvt/codrv # # Pointing devices: # mse* Logitech and ATI Inport bus mouse # psm* PS/2 mouse # # Terminal ports: # sio* fast interrupt PC COM ports (really makes tty* entries for sio) # tty* alias for sio ports, this is what the system really wants # com* standard PC COM ports (really makes tty* entries for com) # Note that the `com' driver is not configured in the # supplied kernels and is usually not what you want. In # a future release it may be completely desupported. Fair # warning. # # Pseudo terminals: # pty* set of 16 master and slave pseudo terminals # vty* virtual terminals using syscons/pcvt/codrv console # # Printers: # lpt* stock lp # lpa* interruptless lp # # Call units: # # Special purpose devices: # bpf* packet filter # dcf* dcf clock # speaker pc speaker # tw* xten power controller # snd* various sound cards # # $Id: MAKEDEV,v 1.17 1993/12/14 11:11:37 alm Exp $ # PATH=/sbin:/bin/:/usr/bin:/usr/sbin: umask 77 for i do case $i in all) sh MAKEDEV std # standard sh MAKEDEV wd0 wd1 fd0 fd1 wt0 sd0 sd1 st0 cd0 # bdev sh MAKEDEV pty0 tty0 tty1 tty2 tty3 pc0 lpt0 lpt1 lpt2 # cdev sh MAKEDEV ch0 tw0 bpf0 dcf0 lpa0 lpa1 lpa2 # cdev sh MAKEDEV speaker mse0 sio0 sio1 sio2 sio3 # cdev # NOTE: co0 and vty04 are not done by a "sh MAKEDEV all" # these are for codrv and interfere with other devices! - rgrimes ;; std) rm -f console drum mem kmem null zero io tty klog stdin stdout stderr mknod console c 0 0; chmod 600 console; chown root.wheel console mknod drum c 4 0; chmod 640 drum; chown root.kmem drum mknod kmem c 2 1; chmod 640 kmem; chown root.kmem kmem mknod mem c 2 0; chmod 640 mem; chown root.kmem mem mknod null c 2 2; chmod 666 null; chown root.wheel null mknod zero c 2 12; chmod 666 zero; chown root.wheel zero mknod io c 2 14; chmod 640 io; chown root.kmem io mknod tty c 1 0; chmod 666 tty; chown root.wheel tty mknod klog c 7 0; chmod 600 klog; chown root.wheel klog mknod stdin c 22 0; chmod 666 stdin; chown root.wheel stdin mknod stdout c 22 1; chmod 666 stdout; chown root.wheel stdout mknod stderr c 22 2; chmod 666 stderr; chown root.wheel stderr rm -f fd/* mkdir fd > /dev/null 2>&1 (cd fd && eval `echo "" | awk ' BEGIN { \ for (i = 0; i < 64; i++) \ printf("mknod %d c 22 %d;", i, i)}'`) chown -R bin.bin fd chmod 555 fd chmod 666 fd/* ;; # Create device files for new Archive/Wangtek QIC-02 tape driver (vak) wt*) umask 2 ; u=`expr $i : '..\(.*\)'` if [ x$u = x ]; then u=0; fi rm -f r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f] mknod rwt${u} c 10 `expr 0 + $u`# default density, 512b blocks mknod nrwt${u} c 10 `expr 4 + $u` # mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks # mknod nrWt${u} c 10 `expr 68 + $u` mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes mknod nrwt${u}b c 10 `expr 20 + $u` mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes mknod nrwt${u}c c 10 `expr 28 + $u` mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes mknod nrwt${u}d c 10 `expr 36 + $u` # mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes? # mknod nrwt${u}e c 10 `expr 44 + $u` # mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes? # mknod nrwt${u}f c 10 `expr 52 + $u` chown root.operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f] umask 77 ;; fd*) umask 2 ; unit=`expr $i : '..\(.*\)'` name=fd; blk=2; chr=9; rm -f $name$unit* r$name$unit* case $unit in 0|1|2|3) mknod ${name}${unit} b $blk `expr $unit '*' 64` mknod r${name}${unit} c $chr `expr $unit '*' 64` # Fake BSD partitions for i in a b c d e f g h do ln ${name}${unit} ${name}${unit}$i ln r${name}${unit} r${name}${unit}$i done # User-readable and programmer-readable name sets mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1` mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1` ln ${name}${unit}.1720 ${name}${unit}135hs21 ln r${name}${unit}.1720 r${name}${unit}135hs21 mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2` mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2` ln ${name}${unit}.1480 ${name}${unit}135hs18 ln r${name}${unit}.1480 r${name}${unit}135hs18 ln ${name}${unit}.1480 ${name}${unit}96hs18 ln r${name}${unit}.1480 r${name}${unit}96hs18 mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3` mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3` ln ${name}${unit}.1440 ${name}${unit}135 ln r${name}${unit}.1440 r${name}${unit}135 ln ${name}${unit}.1440 ${name}${unit}135ds18 ln r${name}${unit}.1440 r${name}${unit}135ds18 ln ${name}${unit}.1440 ${name}${unit}96ds18 ln r${name}${unit}.1440 r${name}${unit}96ds18 mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4` mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4` ln ${name}${unit}.1200 ${name}${unit}96 ln r${name}${unit}.1200 r${name}${unit}96 ln ${name}${unit}.1200 ${name}${unit}96ds15 ln r${name}${unit}.1200 r${name}${unit}96ds15 ln ${name}${unit}.1200 ${name}${unit}135ds15 ln r${name}${unit}.1200 r${name}${unit}135ds15 mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5` mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5` ln ${name}${unit}.820 ${name}${unit}96hs10 ln r${name}${unit}.820 r${name}${unit}96hs10 ln ${name}${unit}.820 ${name}${unit}135hs10 ln r${name}${unit}.820 r${name}${unit}135hs10 mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6` mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6` ln ${name}${unit}.800 ${name}${unit}96ds10 ln r${name}${unit}.800 r${name}${unit}96ds10 ln ${name}${unit}.800 ${name}${unit}135ds10 ln r${name}${unit}.800 r${name}${unit}135ds10 mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7` mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7` ln ${name}${unit}.720 ${name}${unit}96ds9 ln r${name}${unit}.720 r${name}${unit}96ds9 ln ${name}${unit}.720 ${name}${unit}135ds9 ln r${name}${unit}.720 r${name}${unit}135ds9 mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8` mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8` ln ${name}${unit}.360 ${name}${unit}48 ln r${name}${unit}.360 r${name}${unit}48 ln ${name}${unit}.360 ${name}${unit}48ds9 ln r${name}${unit}.360 r${name}${unit}48ds9 chgrp operator ${name}${unit}* r${name}${unit}* chmod 640 ${name}${unit}* r${name}${unit}* ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; sd*|wd*) umask 2 ; unit=`expr $i : '..\(.*\)'` case $i in sd*) name=sd; blk=4; chr=13;; wd*) name=wd; blk=0; chr=3;; esac rm -f $name$unit? r$name$unit? case $unit in 0|1|2|3|4|5|6) mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0` mknod ${name}${unit}b b $blk `expr $unit '*' 8 + 1` mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2` mknod ${name}${unit}d b $blk `expr $unit '*' 8 + 3` mknod ${name}${unit}e b $blk `expr $unit '*' 8 + 4` mknod ${name}${unit}f b $blk `expr $unit '*' 8 + 5` mknod ${name}${unit}g b $blk `expr $unit '*' 8 + 6` mknod ${name}${unit}h b $blk `expr $unit '*' 8 + 7` mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0` mknod r${name}${unit}b c $chr `expr $unit '*' 8 + 1` mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2` mknod r${name}${unit}d c $chr `expr $unit '*' 8 + 3` mknod r${name}${unit}e c $chr `expr $unit '*' 8 + 4` mknod r${name}${unit}f c $chr `expr $unit '*' 8 + 5` mknod r${name}${unit}g c $chr `expr $unit '*' 8 + 6` mknod r${name}${unit}h c $chr `expr $unit '*' 8 + 7` chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h] chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; uk*) unit=`expr $i : 'uk\(.*\)'` rm -f uk$unit mknod uk$unit c 27 $unit ;; com*) unit=`expr $i : '...\(.*\)'` rm -f tty0$unit mknod tty0$unit c 8 $unit chown uucp.wheel tty0$unit ;; pty*) class=`expr $i : 'pty\(.*\)'` case $class in 0) offset=0 name=p;; 1) offset=16 name=q;; 2) offset=32 name=r;; 3) offset=48 name=s;; # Note that telnetd, rlogind, and xterm (at least) only look at p-s. 4) offset=64 name=t;; *) echo bad unit for pty in: $i;; esac case $class in 0|1|2|3|4) umask 0 eval `echo $offset $name | awk ' { b=$1; n=$2 } END { for (i = 0; i < 16; i++) printf("rm -f tty%s%x; mknod tty%s%x c 5 %d; \ rm -f pty%s%x; mknod pty%s%x c 6 %d; ", \ n, i, n, i, b+i, n, i, n, i, b+i); }'` umask 77 if [ $class = 1 ]; then mv ttyqf ttyv0; mv ptyqf ptyv0 fi ;; esac ;; st*) umask 2 ; unit=`expr $i : '..\(.*\)'` chr=14; #remove old stype names rm -f [hml]rst[0123456] [hml][en]rst[0123456] [hml]enrst[0123456] #remove new style names rm -f rst${unit} [en]rst${unit} enrst${unit} rm -f rst${unit}.[0123] nrst${unit}.[0123]\ erst${unit}.[0123] st${unit}ctl.[0123] case $unit in 0|1|2|3|4|5|6) for mode in 0 1 2 3 do mknod rst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 0` mknod nrst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 1` mknod erst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 2` mknod st${unit}ctl.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 3` chgrp operator rst${unit}.${mode}\ nrst${unit}.${mode} \ erst${unit}.${mode} \ st${unit}ctl.${mode} chmod 644 rst${unit}.${mode}\ nrst${unit}.${mode} \ erst${unit}.${mode} chmod 660 st${unit}ctl.${mode} done ln rst${unit}.0 rst${unit} ln nrst${unit}.0 nrst${unit} ln erst${unit}.0 erst${unit} ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; ch*) umask 2 ; unit=`expr $i : '..\(.*\)'` case $i in ch*) name=ch; chr=17;; esac rm -f $name$unit case $unit in 0|1|2|3|4|5|6) mknod ${name}${unit} c $chr `expr $unit '*' 16 + 0` chgrp operator ${name}${unit} chmod 640 ${name}${unit} ;; *) echo bad unit for media changer in: $i ;; esac umask 77 ;; cd*) umask 2 ; unit=`expr $i : '..\(.*\)'` case $i in cd*) name=cd; blk=6; chr=15;; esac rm -f $name$unit? r$name$unit? case $unit in 0|1|2|3|4|5|6) mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0` mknod ${name}${unit}d b $blk `expr $unit '*' 8 + 3` mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0` mknod r${name}${unit}d c $chr `expr $unit '*' 8 + 3` chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h] chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; lpt*) unit=`expr $i : 'lpt\(.*\)'` rm -f lpt$unit mknod lpt$unit c 16 $unit chown root.wheel lpt$unit ;; tw*) unit=`expr $i : 'tw\(.*\)'` rm -f tw$unit mknod tw$unit c 19 $unit chown root.wheel tw$unit ;; # hv 22-apr-93 use this to create the necessary video device for # pccons driver pc*) chr=12 minor=0 name=vga rm -f ${name} kbd kbdco vgaco ttyv[0-9][0-9] mknod ${name} c ${chr} ${minor} chown root.wheel $name ;; # Use this to create virtual consoles for syscons, pcvt or codrv # /dev/ttyv0-b # use as MAKEDEV vtyNN to create NN entries vty*) chr=12 units=`expr $i : 'vty\(.*\)'` umask 0 eval `echo ${chr} ${units} | awk ' { c=$1; n=$2 } END { for (i = 0; i < n; i++) printf("rm -f ttyv%01x; mknod ttyv%01x c %d %d;", \ i, i, c, i); }'` umask 77 ;; bpf*) unit=`expr $i : 'bpf\(.*\)'` rm -f bpf$unit mknod bpf$unit c 23 $unit chown root.wheel bpf$unit ;; dcf*) unit=`expr $i : 'dcf\(.*\)'` rm -f dcf$unit mknod dcf$unit c 24 $unit chown root.wheel dcf$unit ;; lpa*) unit=`expr $i : 'lpa\(.*\)'` chr=25 rm -f lpa$unit lpa${unit}p mknod lpa${unit} c $chr `expr $unit + 0` mknod lpa${unit}p c $chr `expr $unit + 32` chown root.wheel lpa${unit} lpa${unit}p ;; speaker) rm -f speaker mknod speaker c 26 0 chown root.wheel speaker ;; sio*|tty*) unit=`expr $i : '...\(.*\)'` rm -f tty0$unit mknod tty0$unit c 28 $unit chown uucp.wheel tty0$unit ;; mse*) unit=`expr $i : 'mse\(.*\)'` chr=27 rm -f mse$unit mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 chown root.wheel mse$unit ;; psm*) unit=`expr $i : 'psm\(.*\)'` chr=21 rm -f psm$unit mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 chown root.wheel psm$unit ;; mouse*) name=`expr $i : 'mouse-\(.*\)'` if [ ! -c $name ]; then $0 $name # make the appropriate device fi rm -f mouse ln -s $name mouse ;; snd*) chr=30 rm -f /dev/mixer # Mixer [ Control ] mknod /dev/mixer c $chr 0 chmod 666 /dev/mixer rm -f /dev/sequencer # Sequencer [ FM Synth and MIDI output ] mknod /dev/sequencer c $chr 1 chmod 666 /dev/sequencer rm -f /dev/midi # Midi input [ Not implemented ] mknod /dev/midi c $chr 2 rm -f /dev/dsp # DSP [ Digitized voice ] mknod /dev/dsp c $chr 3 chmod 666 /dev/dsp rm -f /dev/audio # SPARC audio [ Not fully implemented ] mknod /dev/audio c $chr 4 chmod 666 /dev/audio rm -f /dev/dsp16 # DSP16 [ Same as /dev/dsp, except 16 bits ] mknod /dev/dsp16 c $chr 5 chmod 666 /dev/dsp16 rm -f /dev/sndstat # Status Device [ Debugging interface ] mknod /dev/sndstat c $chr 6 chmod 666 /dev/sndstat rm -f /dev/pro_midi # PRO_MIDI [PAS midi input and output] mknod /dev/pro_midi c $chr 15 chmod 666 /dev/pro_midi rm -f /dev/dsp1 # DSP 1 [ SB emulation of PAS16 or 2nd audio ] mknod /dev/dsp1 c $chr 19 chmod 666 /dev/dsp1 rm -f /dev/audio1 # Sparc Audio 1 [ SB emulation of PAS16 or 2nd audio ] mknod /dev/audio1 c $chr 20 chmod 666 /dev/audio1 ;; local) umask 0 sh MAKEDEV.local ;; esac done