# # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.137 1998/12/27 13:06:40 phk Exp $ machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident GENERIC maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? #controller aic0 at isa? port 0x340 bio irq 11 controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio device sc0 at isa? port IO_KBD conflicts tty irq 1 device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 device lpt0 at isa? port? tty irq 7 device psm0 at isa? port IO_KBD conflicts tty irq 12 # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 device fxp0 device mx0 device pn0 device rl0 device tl0 device tx0 device vr0 device vx0 device wb0 device xl0 device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter # USB support #controller uhci0 #controller ohci0 #controller usb0 # # for the moment we have to specify the priorities of the device # drivers explicitly by the ordering in the list below. This will # be changed in the future. # #device ums0 #device ukbd0 #device ulpt0 #device uhub0 #device ucom0 #device umodem0 #device hid0 #device ugen0 # #options USB_DEBUG #options USBVERBOSE