# $FreeBSD$ # # This file, if present, will be read by make (see /usr/share/mk/sys.mk). # It allows you to override macro definitions to make without changing # your source tree, or anything the source tree installs. # # This file must be in valid Makefile syntax. # # You have to find the things you can put here in the Makefiles and # documentation of the source tree. # # CFLAGS controls the compiler settings used when compiling C code. # Note that optimisation settings above -O (-O2, ...) are not recommended # or supported for compiling the world or the kernel - please revert any # nonstandard optimisation settings to "-O" before submitting bug reports # to the developers. # Note also that at this time the -O2 setting is known to produce BROKEN # CODE on the Alpha platform. # #CFLAGS= -O -pipe # # CXXFLAGS controls the compiler settings used when compiling C++ code. # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" # alone will remove the often needed contents of CFLAGS from CXXFLAGS. # #CXXFLAGS+= -fmemoize-lookups -fsave-memoized # # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested # for use in developing FreeBSD and testing changes. They can be used by # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. # BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ -Wcast-qual -Wchar-subscripts -Wconversion -Winline \ -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings # # Avoid compiling profiled libraries #NOPROFILE= true # # Compare before install #INSTALL=install -C # # To avoid building perl #NOPERL= true # # To avoid building the suid perl #NOSUIDPERL= true # # To build perl with thread support #PERL_THREADED= true # # To avoid building various parts of the base system: #NO_CVS= true # do not build CVS #NO_BIND= true # do not build BIND #NO_FORTRAN= true # do not build g77 and related libraries #NO_LPR= true # do not build lpr and related programs #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector #NO_MODULES= true # do not build modules with the kernel #NO_OBJC= true # do not build Objective C support #NO_OPENSSH= true # do not build OpenSSH #NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) #NO_SENDMAIL= true # do not build sendmail and related programs #NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs #NO_TCSH= true # do not build and install /bin/csh (which is tcsh) #NO_X= true # do not compile in XWindows support (e.g. doscmd) #NOCRYPT= true # do not build any crypto code #NODESCRYPTLINKS=true # do not replace libcrypt -> libscrypt links #NOGAMES= true # do not build games (games/ subdir) #NOINFO= true # do not make or install info files #NOLIBC_R= true # do not build libc_r (re-entrant version of libc) #NOSECURE= true # do not build crypto code in secure/ subdir #NOSHARE= true # do not go into the share subdir #NOUUCP= true # do not build uucp related programs # # To build sys/modules when building the world (our old way of doing things) #MODULES_WITH_WORLD=true # do not build modules when building kernel # # # Controls for building various OPTIONAL parts of the crypto system. # Patents are involved - you must not use these unless you either have # a license or would be within patent 'fair use' provisions. # Generally 'educational use' is OK, but personal (even non-commercial) # use is not. # *** It is YOUR RESPONSIBILITY to determine if you can use these! *** # # Patented in the USA and many european countries - thought to be OK to # use for any non-commercial use. This is optional. #MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) # # Patented in the USA only (due to expire in September 2000). RSA is # required for OpenSSH. Either use this or ports/security/rsaref. #MAKE_RSAINTL= YES # RSA (public key exchange) # # # To avoid running MAKEDEV all on /dev during install: #NO_MAKEDEV= true # # To compile just the kernel with special optimisations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway): # #COPTFLAGS= -O -pipe # # If you do not want unformatted manual pages to be compressed # when they are installed: # #NOMANCOMPRESS= true # # # If you want the "compat" shared libraries installed as part of your normal # builds, uncomment these: # #COMPAT1X= yes #COMPAT20= yes #COMPAT21= yes #COMPAT22= yes #COMPAT3X= yes # # # If you do not want additional documentation (some of which are # a few hundred KB's) for ports to be installed: # #NOPORTDOCS= true # # # Default format for system documentation, depends on your printer. # Set this to "ascii" for simple printers or screen # #PRINTERDEVICE= ps # # # How long to wait for a console keypress before booting the default kernel. # This value is approximately in milliseconds. Keypresses are accepted by the # BIOS before booting from disk, making it possible to give custom boot # parameters even when this is set to 0. # #BOOTWAIT=0 #BOOTWAIT=30000 # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. Alter as necessary. # # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 9600. Set the speed to a larger value # for better interactive response. # #BOOT_COMCONSOLE_SPEED= 115200 # # # By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. # If you have a XFree86 from before 3.0 that has the X distribution in # /usr/X386, you want to uncomment this. # #X11BASE= /usr/X386 # # # If you have Motif on your system, uncomment this. # #HAVE_MOTIF= yes #MOTIF_STATIC= yes # # If the default location of the Motif library (specified below) is NOT # appropriate for you, uncomment this and change it to the correct value. # If your motif is in ${X11BASE}/lib, you don't need to touch this line. # #MOTIFLIB= -L${X11BASE}/lib -lXm # # # If you're resident in the USA, this will help various ports to determine # whether or not they should attempt to comply with the various U.S. # export regulations on certain types of software which do not apply to # anyone else in the world. # #USA_RESIDENT= YES # # Next one will help ports developers to debug # #FORCE_PKG_REGISTER= YES # # # Port master sites. # # If you want your port fetches to go somewhere else than the default # (specified below) in case the distfile/patchfile was not found, # uncomment this and change it to a location nearest you. (Don't # remove the "/${DIST_SUBDIR}/" part.) # #MASTER_SITE_BACKUP?= \ # ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ # # If you want your port fetches to check the above site first (before # the MASTER_SITES specified in the port Makefiles), uncomment the # line below. You can also change the right side to point to wherever # you want. # #MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} # # Some ports use a special variable to point to a collection of # mirrors of well-known software archives. If you have a mirror close # to you, uncomment any of the following lines and change it to that # address. (Don't remove the "/%SUBDIR%/" part.) # # Note: the right hand sides of the following lines are only for your # information. For a full list of default sites, take a look at # bsd.port.mk. # #MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ #MASTER_SITE_GNU= ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ #MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ #MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ #MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ #MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ #MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ #MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ #MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ #MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ # # # Kerberos IV # If you want KerberosIV (KTH eBones), define this: # #MAKE_KERBEROS4= yes # # # Kerberos 5 # If you want KerberosIV (KTH Heimdal), define this: # ** WARNING ** # ** WARNING ** This is very experimental at this stage. If you # ** WARNING ** need stable Kerberos5, rather use the port(s). # ** WARNING ** # #MAKE_KERBEROS5= yes # # # Kerberos5 # If you want to install MIT Kerberos5 port somewhere other than /usr/local, # define this (this is also used to tell ssh1 that kerberos is needed): # #KRB5_HOME= /usr/local # # # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution # file(s) you use on your site (see /usr/share/examples/cvsup/README for more # information on CVSup and these files). To use, do "make update" in /usr/src. # #SUP_UPDATE= yes # #SUP= /usr/local/bin/cvsup #SUPFLAGS= -g -L 2 #SUPFILE= /usr/share/examples/cvsup/standard-supfile #SUPFILE1= /usr/share/examples/cvsup/secure-supfile #PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile # # top(1) uses a hash table for the user names. The size of this hash # can be tuned to match the number of local users. The table size should # be a prime number approximately twice as large as the number of lines in # /etc/passwd. The default number is 20011. # #TOP_TABLE_SIZE= 101 # # Documentation # # The list of languages and encodings to build and install # #DOC_LANG= en_US.ISO_8859-1 ru_RU.KOI8-R