/* $NetBSD: midway.c,v 1.30 1997/09/29 17:40:38 chuck Exp $ */ /* (sync'd to midway.c 1.68) */ /*- * Copyright (c) 1996 Charles D. Cranor and Washington University. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles D. Cranor and * Washington University. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * * m i d w a y . c e n i 1 5 5 d r i v e r * * author: Chuck Cranor * started: spring, 1996 (written from scratch). * * notes from the author: * Extra special thanks go to Werner Almesberger, EPFL LRC. Werner's * ENI driver was especially useful in figuring out how this card works. * I would also like to thank Werner for promptly answering email and being * generally helpful. */ #define EN_DIAG #define EN_DDBHOOK 1 /* compile in ddb functions */ /* * Note on EN_ENIDMAFIX: the byte aligner on the ENI version of the card * appears to be broken. it works just fine if there is no load... however * when the card is loaded the data get corrupted. to see this, one only * has to use "telnet" over ATM. do the following command in "telnet": * cat /usr/share/misc/termcap * "telnet" seems to generate lots of 1023 byte mbufs (which make great * use of the byte aligner). watch "netstat -s" for checksum errors. * * I further tested this by adding a function that compared the transmit * data on the card's SRAM with the data in the mbuf chain _after_ the * "transmit DMA complete" interrupt. using the "telnet" test I got data * mismatches where the byte-aligned data should have been. using ddb * and en_dumpmem() I verified that the DTQs fed into the card were * absolutely correct. thus, we are forced to concluded that the ENI * hardware is buggy. note that the Adaptec version of the card works * just fine with byte DMA. * * bottom line: we set EN_ENIDMAFIX to 1 to avoid byte DMAs on the ENI * card. */ #if defined(DIAGNOSTIC) && !defined(EN_DIAG) #define EN_DIAG /* link in with master DIAG option */ #endif #define EN_COUNT(X) (X)++ #ifdef EN_DEBUG #undef EN_DDBHOOK #define EN_DDBHOOK 1 /* * This macro removes almost all the EN_DEBUG conditionals in the code that make * to code a good deal less readable. */ #define DBG(SC, FL, PRINT) do { \ if ((SC)->debug & DBG_##FL) { \ if_printf((SC)->ifp, "%s: "#FL": ", __func__); \ printf PRINT; \ printf("\n"); \ } \ } while (0) enum { DBG_INIT = 0x0001, /* debug attach/detach */ DBG_TX = 0x0002, /* debug transmitting */ DBG_SERV = 0x0004, /* debug service interrupts */ DBG_IOCTL = 0x0008, /* debug ioctls */ DBG_VC = 0x0010, /* debug VC handling */ DBG_INTR = 0x0020, /* debug interrupts */ DBG_DMA = 0x0040, /* debug DMA probing */ DBG_IPACKETS = 0x0080, /* print input packets */ DBG_REG = 0x0100, /* print all register access */ DBG_LOCK = 0x0200, /* debug locking */ }; #else /* EN_DEBUG */ #define DBG(SC, FL, PRINT) do { } while (0) #endif /* EN_DEBUG */ #include "opt_inet.h" #include "opt_natm.h" #include "opt_ddb.h" #ifdef DDB #undef EN_DDBHOOK #define EN_DDBHOOK 1 #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(INET) || defined(INET6) #include #include #endif #ifdef NATM #include #endif #include #include #include #include #include #include #include #include #include #include #include /* * params */ #ifndef EN_TXHIWAT #define EN_TXHIWAT (64 * 1024) /* max 64 KB waiting to be DMAd out */ #endif SYSCTL_DECL(_hw_atm); /* * dma tables * * The plan is indexed by the number of words to transfer. * The maximum index is 15 for 60 words. */ struct en_dmatab { uint8_t bcode; /* code */ uint8_t divshift; /* byte divisor */ }; static const struct en_dmatab en_dmaplan[] = { { 0, 0 }, /* 0 */ { MIDDMA_WORD, 2}, /* 1 */ { MIDDMA_2WORD, 3}, /* 2 */ { MIDDMA_WORD, 2}, /* 3 */ { MIDDMA_4WORD, 4}, /* 4 */ { MIDDMA_WORD, 2}, /* 5 */ { MIDDMA_2WORD, 3}, /* 6 */ { MIDDMA_WORD, 2}, /* 7 */ { MIDDMA_8WORD, 5}, /* 8 */ { MIDDMA_WORD, 2}, /* 9 */ { MIDDMA_2WORD, 3}, /* 10 */ { MIDDMA_WORD, 2}, /* 11 */ { MIDDMA_4WORD, 4}, /* 12 */ { MIDDMA_WORD, 2}, /* 13 */ { MIDDMA_2WORD, 3}, /* 14 */ { MIDDMA_WORD, 2}, /* 15 */ { MIDDMA_16WORD,6}, /* 16 */ }; /* * prototypes */ #ifdef EN_DDBHOOK int en_dump(int unit, int level); int en_dumpmem(int,int,int); #endif static void en_close_finish(struct en_softc *sc, struct en_vcc *vc); #define EN_LOCK(SC) do { \ DBG(SC, LOCK, ("ENLOCK %d\n", __LINE__)); \ mtx_lock(&sc->en_mtx); \ } while (0) #define EN_UNLOCK(SC) do { \ DBG(SC, LOCK, ("ENUNLOCK %d\n", __LINE__)); \ mtx_unlock(&sc->en_mtx); \ } while (0) #define EN_CHECKLOCK(sc) mtx_assert(&sc->en_mtx, MA_OWNED) /* * While a transmit mbuf is waiting to get transmit DMA resources we * need to keep some information with it. We don't want to allocate * additional memory for this so we stuff it into free fields in the * mbuf packet header. Neither the checksum fields nor the rcvif field are used * so use these. */ #define TX_AAL5 0x1 /* transmit AAL5 PDU */ #define TX_HAS_TBD 0x2 /* TBD did fit into mbuf */ #define TX_HAS_PAD 0x4 /* padding did fit into mbuf */ #define TX_HAS_PDU 0x8 /* PDU trailer did fit into mbuf */ #define MBUF_SET_TX(M, VCI, FLAGS, DATALEN, PAD, MAP) do { \ (M)->m_pkthdr.csum_data = (VCI) | ((FLAGS) << MID_VCI_BITS); \ (M)->m_pkthdr.csum_flags = ((DATALEN) & 0xffff) | \ ((PAD & 0x3f) << 16); \ (M)->m_pkthdr.rcvif = (void *)(MAP); \ } while (0) #define MBUF_GET_TX(M, VCI, FLAGS, DATALEN, PAD, MAP) do { \ (VCI) = (M)->m_pkthdr.csum_data & ((1 << MID_VCI_BITS) - 1); \ (FLAGS) = ((M)->m_pkthdr.csum_data >> MID_VCI_BITS) & 0xf; \ (DATALEN) = (M)->m_pkthdr.csum_flags & 0xffff; \ (PAD) = ((M)->m_pkthdr.csum_flags >> 16) & 0x3f; \ (MAP) = (void *)((M)->m_pkthdr.rcvif); \ } while (0) #define EN_WRAPADD(START, STOP, CUR, VAL) do { \ (CUR) = (CUR) + (VAL); \ if ((CUR) >= (STOP)) \ (CUR) = (START) + ((CUR) - (STOP)); \ } while (0) #define WORD_IDX(START, X) (((X) - (START)) / sizeof(uint32_t)) #define SETQ_END(SC, VAL) ((SC)->is_adaptec ? \ ((VAL) | (MID_DMA_END >> 4)) : \ ((VAL) | (MID_DMA_END))) /* * The dtq and drq members are set for each END entry in the corresponding * card queue entry. It is used to find out, when a buffer has been * finished DMAing and can be freed. * * We store sc->dtq and sc->drq data in the following format... * the 0x80000 ensures we != 0 */ #define EN_DQ_MK(SLOT, LEN) (((SLOT) << 20) | (LEN) | (0x80000)) #define EN_DQ_SLOT(X) ((X) >> 20) #define EN_DQ_LEN(X) ((X) & 0x3ffff) /* * Variables */ static uma_zone_t en_vcc_zone; /***********************************************************************/ /* * en_read{x}: read a word from the card. These are the only functions * that read from the card. */ static __inline uint32_t en_readx(struct en_softc *sc, uint32_t r) { uint32_t v; #ifdef EN_DIAG if (r > MID_MAXOFF || (r % 4)) panic("en_read out of range, r=0x%x", r); #endif v = bus_space_read_4(sc->en_memt, sc->en_base, r); return (v); } static __inline uint32_t en_read(struct en_softc *sc, uint32_t r) { uint32_t v; #ifdef EN_DIAG if (r > MID_MAXOFF || (r % 4)) panic("en_read out of range, r=0x%x", r); #endif v = bus_space_read_4(sc->en_memt, sc->en_base, r); DBG(sc, REG, ("en_read(%#x) -> %08x", r, v)); return (v); } /* * en_write: write a word to the card. This is the only function that * writes to the card. */ static __inline void en_write(struct en_softc *sc, uint32_t r, uint32_t v) { #ifdef EN_DIAG if (r > MID_MAXOFF || (r % 4)) panic("en_write out of range, r=0x%x", r); #endif DBG(sc, REG, ("en_write(%#x) <- %08x", r, v)); bus_space_write_4(sc->en_memt, sc->en_base, r, v); } /* * en_k2sz: convert KBytes to a size parameter (a log2) */ static __inline int en_k2sz(int k) { switch(k) { case 1: return (0); case 2: return (1); case 4: return (2); case 8: return (3); case 16: return (4); case 32: return (5); case 64: return (6); case 128: return (7); default: panic("en_k2sz"); } return (0); } #define en_log2(X) en_k2sz(X) /* * en_b2sz: convert a DMA burst code to its byte size */ static __inline int en_b2sz(int b) { switch (b) { case MIDDMA_WORD: return (1*4); case MIDDMA_2WMAYBE: case MIDDMA_2WORD: return (2*4); case MIDDMA_4WMAYBE: case MIDDMA_4WORD: return (4*4); case MIDDMA_8WMAYBE: case MIDDMA_8WORD: return (8*4); case MIDDMA_16WMAYBE: case MIDDMA_16WORD: return (16*4); default: panic("en_b2sz"); } return (0); } /* * en_sz2b: convert a burst size (bytes) to DMA burst code */ static __inline int en_sz2b(int sz) { switch (sz) { case 1*4: return (MIDDMA_WORD); case 2*4: return (MIDDMA_2WORD); case 4*4: return (MIDDMA_4WORD); case 8*4: return (MIDDMA_8WORD); case 16*4: return (MIDDMA_16WORD); default: panic("en_sz2b"); } return(0); } #ifdef EN_DEBUG /* * Dump a packet */ static void en_dump_packet(struct en_softc *sc, struct mbuf *m) { int plen = m->m_pkthdr.len; u_int pos = 0; u_int totlen = 0; int len; u_char *ptr; if_printf(sc->ifp, "packet len=%d", plen); while (m != NULL) { totlen += m->m_len; ptr = mtod(m, u_char *); for (len = 0; len < m->m_len; len++, pos++, ptr++) { if (pos % 16 == 8) printf(" "); if (pos % 16 == 0) printf("\n"); printf(" %02x", *ptr); } m = m->m_next; } printf("\n"); if (totlen != plen) printf("sum of m_len=%u\n", totlen); } #endif /*********************************************************************/ /* * DMA maps */ /* * Map constructor for a MAP. * * This is called each time when a map is allocated * from the pool and about to be returned to the user. Here we actually * allocate the map if there isn't one. The problem is that we may fail * to allocate the DMA map yet have no means to signal this error. Therefor * when allocating a map, the call must check that there is a map. An * additional problem is, that i386 maps will be NULL, yet are ok and must * be freed so let's use a flag to signal allocation. * * Caveat: we have no way to know that we are called from an interrupt context * here. We rely on the fact, that bus_dmamap_create uses M_NOWAIT in all * its allocations. * * LOCK: any, not needed */ static int en_map_ctor(void *mem, int size, void *arg, int flags) { struct en_softc *sc = arg; struct en_map *map = mem; int err; err = bus_dmamap_create(sc->txtag, 0, &map->map); if (err != 0) { if_printf(sc->ifp, "cannot create DMA map %d\n", err); return (err); } map->flags = ENMAP_ALLOC; map->sc = sc; return (0); } /* * Map destructor. * * Called when a map is disposed into the zone. If the map is loaded, unload * it. * * LOCK: any, not needed */ static void en_map_dtor(void *mem, int size, void *arg) { struct en_map *map = mem; if (map->flags & ENMAP_LOADED) { bus_dmamap_unload(map->sc->txtag, map->map); map->flags &= ~ENMAP_LOADED; } } /* * Map finializer. * * This is called each time a map is returned from the zone to the system. * Get rid of the dmamap here. * * LOCK: any, not needed */ static void en_map_fini(void *mem, int size) { struct en_map *map = mem; bus_dmamap_destroy(map->sc->txtag, map->map); } /*********************************************************************/ /* * Transmission */ /* * Argument structure to load a transmit DMA map */ struct txarg { struct en_softc *sc; struct mbuf *m; u_int vci; u_int chan; /* transmit channel */ u_int datalen; /* length of user data */ u_int flags; u_int wait; /* return: out of resources */ }; /* * TX DMA map loader helper. This function is the callback when the map * is loaded. It should fill the DMA segment descriptors into the hardware. * * LOCK: locked, needed */ static void en_txdma_load(void *uarg, bus_dma_segment_t *segs, int nseg, bus_size_t mapsize, int error) { struct txarg *tx = uarg; struct en_softc *sc = tx->sc; struct en_txslot *slot = &sc->txslot[tx->chan]; uint32_t cur; /* on-card buffer position (bytes offset) */ uint32_t dtq; /* on-card queue position (byte offset) */ uint32_t last_dtq; /* last DTQ we have written */ uint32_t tmp; u_int free; /* free queue entries on card */ u_int needalign, cnt; bus_size_t rest; /* remaining bytes in current segment */ bus_addr_t addr; bus_dma_segment_t *s; uint32_t count, bcode; int i; if (error != 0) return; cur = slot->cur; dtq = sc->dtq_us; free = sc->dtq_free; last_dtq = 0; /* make gcc happy */ /* * Local macro to add an entry to the transmit DMA area. If there * are no entries left, return. Save the byte offset of the entry * in last_dtq for later use. */ #define PUT_DTQ_ENTRY(ENI, BCODE, COUNT, ADDR) \ if (free == 0) { \ EN_COUNT(sc->stats.txdtqout); \ tx->wait = 1; \ return; \ } \ last_dtq = dtq; \ en_write(sc, dtq + 0, (ENI || !sc->is_adaptec) ? \ MID_MK_TXQ_ENI(COUNT, tx->chan, 0, BCODE) : \ MID_MK_TXQ_ADP(COUNT, tx->chan, 0, BCODE)); \ en_write(sc, dtq + 4, ADDR); \ \ EN_WRAPADD(MID_DTQOFF, MID_DTQEND, dtq, 8); \ free--; /* * Local macro to generate a DMA entry to DMA cnt bytes. Updates * the current buffer byte offset accordingly. */ #define DO_DTQ(TYPE) do { \ rest -= cnt; \ EN_WRAPADD(slot->start, slot->stop, cur, cnt); \ DBG(sc, TX, ("tx%d: "TYPE" %u bytes, %ju left, cur %#x", \ tx->chan, cnt, (uintmax_t)rest, cur)); \ \ PUT_DTQ_ENTRY(1, bcode, count, addr); \ \ addr += cnt; \ } while (0) if (!(tx->flags & TX_HAS_TBD)) { /* * Prepend the TBD - it did not fit into the first mbuf */ tmp = MID_TBD_MK1((tx->flags & TX_AAL5) ? MID_TBD_AAL5 : MID_TBD_NOAAL5, sc->vccs[tx->vci]->txspeed, tx->m->m_pkthdr.len / MID_ATMDATASZ); en_write(sc, cur, tmp); EN_WRAPADD(slot->start, slot->stop, cur, 4); tmp = MID_TBD_MK2(tx->vci, 0, 0); en_write(sc, cur, tmp); EN_WRAPADD(slot->start, slot->stop, cur, 4); /* update DMA address */ PUT_DTQ_ENTRY(0, MIDDMA_JK, WORD_IDX(slot->start, cur), 0); } for (i = 0, s = segs; i < nseg; i++, s++) { rest = s->ds_len; addr = s->ds_addr; if (sc->is_adaptec) { /* adaptec card - simple */ /* advance the on-card buffer pointer */ EN_WRAPADD(slot->start, slot->stop, cur, rest); DBG(sc, TX, ("tx%d: adp %ju bytes %#jx (cur now 0x%x)", tx->chan, (uintmax_t)rest, (uintmax_t)addr, cur)); PUT_DTQ_ENTRY(0, 0, rest, addr); continue; } /* * do we need to do a DMA op to align to the maximum * burst? Note, that we are alway 32-bit aligned. */ if (sc->alburst && (needalign = (addr & sc->bestburstmask)) != 0) { /* compute number of bytes, words and code */ cnt = sc->bestburstlen - needalign; if (cnt > rest) cnt = rest; count = cnt / sizeof(uint32_t); if (sc->noalbursts) { bcode = MIDDMA_WORD; } else { bcode = en_dmaplan[count].bcode; count = cnt >> en_dmaplan[count].divshift; } DO_DTQ("al_dma"); } /* do we need to do a max-sized burst? */ if (rest >= sc->bestburstlen) { count = rest >> sc->bestburstshift; cnt = count << sc->bestburstshift; bcode = sc->bestburstcode; DO_DTQ("best_dma"); } /* do we need to do a cleanup burst? */ if (rest != 0) { cnt = rest; count = rest / sizeof(uint32_t); if (sc->noalbursts) { bcode = MIDDMA_WORD; } else { bcode = en_dmaplan[count].bcode; count = cnt >> en_dmaplan[count].divshift; } DO_DTQ("clean_dma"); } } KASSERT (tx->flags & TX_HAS_PAD, ("PDU not padded")); if ((tx->flags & TX_AAL5) && !(tx->flags & TX_HAS_PDU)) { /* * Append the AAL5 PDU trailer */ tmp = MID_PDU_MK1(0, 0, tx->datalen); en_write(sc, cur, tmp); EN_WRAPADD(slot->start, slot->stop, cur, 4); en_write(sc, cur, 0); EN_WRAPADD(slot->start, slot->stop, cur, 4); /* update DMA address */ PUT_DTQ_ENTRY(0, MIDDMA_JK, WORD_IDX(slot->start, cur), 0); } /* record the end for the interrupt routine */ sc->dtq[MID_DTQ_A2REG(last_dtq)] = EN_DQ_MK(tx->chan, tx->m->m_pkthdr.len); /* set the end flag in the last descriptor */ en_write(sc, last_dtq + 0, SETQ_END(sc, en_read(sc, last_dtq + 0))); #undef PUT_DTQ_ENTRY #undef DO_DTQ /* commit */ slot->cur = cur; sc->dtq_free = free; sc->dtq_us = dtq; /* tell card */ en_write(sc, MID_DMA_WRTX, MID_DTQ_A2REG(sc->dtq_us)); } /* * en_txdma: start transmit DMA on the given channel, if possible * * This is called from two places: when we got new packets from the upper * layer or when we found that buffer space has freed up during interrupt * processing. * * LOCK: locked, needed */ static void en_txdma(struct en_softc *sc, struct en_txslot *slot) { struct en_map *map; struct mbuf *lastm; struct txarg tx; u_int pad; int error; DBG(sc, TX, ("tx%td: starting ...", slot - sc->txslot)); again: bzero(&tx, sizeof(tx)); tx.chan = slot - sc->txslot; tx.sc = sc; /* * get an mbuf waiting for DMA */ _IF_DEQUEUE(&slot->q, tx.m); if (tx.m == NULL) { DBG(sc, TX, ("tx%td: ...done!", slot - sc->txslot)); return; } MBUF_GET_TX(tx.m, tx.vci, tx.flags, tx.datalen, pad, map); /* * note: don't use the entire buffer space. if WRTX becomes equal * to RDTX, the transmitter stops assuming the buffer is empty! --kjc */ if (tx.m->m_pkthdr.len >= slot->bfree) { EN_COUNT(sc->stats.txoutspace); DBG(sc, TX, ("tx%td: out of transmit space", slot - sc->txslot)); goto waitres; } lastm = NULL; if (!(tx.flags & TX_HAS_PAD)) { if (pad != 0) { /* Append the padding buffer */ (void)m_length(tx.m, &lastm); lastm->m_next = sc->padbuf; sc->padbuf->m_len = pad; } tx.flags |= TX_HAS_PAD; } /* * Try to load that map */ error = bus_dmamap_load_mbuf(sc->txtag, map->map, tx.m, en_txdma_load, &tx, BUS_DMA_NOWAIT); if (lastm != NULL) lastm->m_next = NULL; if (error != 0) { if_printf(sc->ifp, "loading TX map failed %d\n", error); goto dequeue_drop; } map->flags |= ENMAP_LOADED; if (tx.wait) { /* probably not enough space */ bus_dmamap_unload(map->sc->txtag, map->map); map->flags &= ~ENMAP_LOADED; sc->need_dtqs = 1; DBG(sc, TX, ("tx%td: out of transmit DTQs", slot - sc->txslot)); goto waitres; } EN_COUNT(sc->stats.launch); sc->ifp->if_opackets++; sc->vccs[tx.vci]->opackets++; sc->vccs[tx.vci]->obytes += tx.datalen; #ifdef ENABLE_BPF if (sc->ifp->if_bpf != NULL) { /* * adjust the top of the mbuf to skip the TBD if present * before passing the packet to bpf. * Also remove padding and the PDU trailer. Assume both of * them to be in the same mbuf. pktlen, m_len and m_data * are not needed anymore so we can change them. */ if (tx.flags & TX_HAS_TBD) { tx.m->m_data += MID_TBD_SIZE; tx.m->m_len -= MID_TBD_SIZE; } tx.m->m_pkthdr.len = m_length(tx.m, &lastm); if (tx.m->m_pkthdr.len > tx.datalen) { lastm->m_len -= tx.m->m_pkthdr.len - tx.datalen; tx.m->m_pkthdr.len = tx.datalen; } BPF_MTAP(sc->ifp, tx.m); } #endif /* * do some housekeeping and get the next packet */ slot->bfree -= tx.m->m_pkthdr.len; _IF_ENQUEUE(&slot->indma, tx.m); goto again; /* * error handling. This is jumped to when we just want to drop * the packet. Must be unlocked here. */ dequeue_drop: if (map != NULL) uma_zfree(sc->map_zone, map); slot->mbsize -= tx.m->m_pkthdr.len; m_freem(tx.m); goto again; waitres: _IF_PREPEND(&slot->q, tx.m); } /* * Create a copy of a single mbuf. It can have either internal or * external data, it may have a packet header. External data is really * copied, so the new buffer is writeable. * * LOCK: any, not needed */ static struct mbuf * copy_mbuf(struct mbuf *m) { struct mbuf *new; MGET(new, M_TRYWAIT, MT_DATA); if (new == NULL) return (NULL); if (m->m_flags & M_PKTHDR) { M_MOVE_PKTHDR(new, m); if (m->m_len > MHLEN) { MCLGET(new, M_TRYWAIT); if ((m->m_flags & M_EXT) == 0) { m_free(new); return (NULL); } } } else { if (m->m_len > MLEN) { MCLGET(new, M_TRYWAIT); if ((m->m_flags & M_EXT) == 0) { m_free(new); return (NULL); } } } bcopy(m->m_data, new->m_data, m->m_len); new->m_len = m->m_len; new->m_flags &= ~M_RDONLY; return (new); } /* * This function is called when we have an ENI adapter. It fixes the * mbuf chain, so that all addresses and lengths are 4 byte aligned. * The overall length is already padded to multiple of cells plus the * TBD so this must always succeed. The routine can fail, when it * needs to copy an mbuf (this may happen if an mbuf is readonly). * * We assume here, that aligning the virtual addresses to 4 bytes also * aligns the physical addresses. * * LOCK: locked, needed */ static struct mbuf * en_fix_mchain(struct en_softc *sc, struct mbuf *m0, u_int *pad) { struct mbuf **prev = &m0; struct mbuf *m = m0; struct mbuf *new; u_char *d; int off; while (m != NULL) { d = mtod(m, u_char *); if ((off = (uintptr_t)d % sizeof(uint32_t)) != 0) { EN_COUNT(sc->stats.mfixaddr); if (M_WRITABLE(m)) { bcopy(d, d - off, m->m_len); m->m_data -= off; } else { if ((new = copy_mbuf(m)) == NULL) { EN_COUNT(sc->stats.mfixfail); m_freem(m0); return (NULL); } new->m_next = m_free(m); *prev = m = new; } } if ((off = m->m_len % sizeof(uint32_t)) != 0) { EN_COUNT(sc->stats.mfixlen); if (!M_WRITABLE(m)) { if ((new = copy_mbuf(m)) == NULL) { EN_COUNT(sc->stats.mfixfail); m_freem(m0); return (NULL); } new->m_next = m_free(m); *prev = m = new; } d = mtod(m, u_char *) + m->m_len; off = 4 - off; while (off) { while (m->m_next && m->m_next->m_len == 0) m->m_next = m_free(m->m_next); if (m->m_next == NULL) { *d++ = 0; KASSERT(*pad > 0, ("no padding space")); (*pad)--; } else { *d++ = *mtod(m->m_next, u_char *); m->m_next->m_len--; m->m_next->m_data++; } m->m_len++; off--; } } prev = &m->m_next; m = m->m_next; } return (m0); } /* * en_start: start transmitting the next packet that needs to go out * if there is one. We take off all packets from the interface's queue and * put them into the channels queue. * * Here we also prepend the transmit packet descriptor and append the padding * and (for aal5) the PDU trailer. This is different from the original driver: * we assume, that allocating one or two additional mbufs is actually cheaper * than all this algorithmic fiddling we would need otherwise. * * While the packet is on the channels wait queue we use the csum_* fields * in the packet header to hold the original datalen, the AAL5 flag and the * VCI. The packet length field in the header holds the needed buffer space. * This may actually be more than the length of the current mbuf chain (when * one or more of TBD, padding and PDU do not fit). * * LOCK: unlocked, needed */ static void en_start(struct ifnet *ifp) { struct en_softc *sc = (struct en_softc *)ifp->if_softc; struct mbuf *m, *lastm; struct atm_pseudohdr *ap; u_int pad; /* 0-bytes to pad at PDU end */ u_int datalen; /* length of user data */ u_int vci; /* the VCI we are transmitting on */ u_int flags; uint32_t tbd[2]; uint32_t pdu[2]; struct en_vcc *vc; struct en_map *map; struct en_txslot *tx; while (1) { IF_DEQUEUE(&ifp->if_snd, m); if (m == NULL) return; flags = 0; ap = mtod(m, struct atm_pseudohdr *); vci = ATM_PH_VCI(ap); if (ATM_PH_VPI(ap) != 0 || vci >= MID_N_VC || (vc = sc->vccs[vci]) == NULL || (vc->vflags & VCC_CLOSE_RX)) { DBG(sc, TX, ("output vpi=%u, vci=%u -- drop", ATM_PH_VPI(ap), vci)); m_freem(m); continue; } if (vc->vcc.aal == ATMIO_AAL_5) flags |= TX_AAL5; m_adj(m, sizeof(struct atm_pseudohdr)); /* * (re-)calculate size of packet (in bytes) */ m->m_pkthdr.len = datalen = m_length(m, &lastm); /* * computing how much padding we need on the end of the mbuf, * then see if we can put the TBD at the front of the mbuf * where the link header goes (well behaved protocols will * reserve room for us). Last, check if room for PDU tail. */ if (flags & TX_AAL5) m->m_pkthdr.len += MID_PDU_SIZE; m->m_pkthdr.len = roundup(m->m_pkthdr.len, MID_ATMDATASZ); pad = m->m_pkthdr.len - datalen; if (flags & TX_AAL5) pad -= MID_PDU_SIZE; m->m_pkthdr.len += MID_TBD_SIZE; DBG(sc, TX, ("txvci%d: buflen=%u datalen=%u lead=%d trail=%d", vci, m->m_pkthdr.len, datalen, (int)M_LEADINGSPACE(m), (int)M_TRAILINGSPACE(lastm))); /* * From here on we need access to sc */ EN_LOCK(sc); /* * Allocate a map. We do this here rather then in en_txdma, * because en_txdma is also called from the interrupt handler * and we are going to have a locking problem then. We must * use NOWAIT here, because the ip_output path holds various * locks. */ map = uma_zalloc_arg(sc->map_zone, sc, M_NOWAIT); if (map == NULL) { /* drop that packet */ EN_COUNT(sc->stats.txnomap); EN_UNLOCK(sc); m_freem(m); continue; } if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { EN_UNLOCK(sc); uma_zfree(sc->map_zone, map); m_freem(m); continue; } /* * Look, whether we can prepend the TBD (8 byte) */ if (M_WRITABLE(m) && M_LEADINGSPACE(m) >= MID_TBD_SIZE) { tbd[0] = htobe32(MID_TBD_MK1((flags & TX_AAL5) ? MID_TBD_AAL5 : MID_TBD_NOAAL5, vc->txspeed, m->m_pkthdr.len / MID_ATMDATASZ)); tbd[1] = htobe32(MID_TBD_MK2(vci, 0, 0)); m->m_data -= MID_TBD_SIZE; bcopy(tbd, m->m_data, MID_TBD_SIZE); m->m_len += MID_TBD_SIZE; flags |= TX_HAS_TBD; } /* * Check whether the padding fits (must be writeable - * we pad with zero). */ if (M_WRITABLE(lastm) && M_TRAILINGSPACE(lastm) >= pad) { bzero(lastm->m_data + lastm->m_len, pad); lastm->m_len += pad; flags |= TX_HAS_PAD; if ((flags & TX_AAL5) && M_TRAILINGSPACE(lastm) > MID_PDU_SIZE) { pdu[0] = htobe32(MID_PDU_MK1(0, 0, datalen)); pdu[1] = 0; bcopy(pdu, lastm->m_data + lastm->m_len, MID_PDU_SIZE); lastm->m_len += MID_PDU_SIZE; flags |= TX_HAS_PDU; } } if (!sc->is_adaptec && (m = en_fix_mchain(sc, m, &pad)) == NULL) { EN_UNLOCK(sc); uma_zfree(sc->map_zone, map); continue; } /* * get assigned channel (will be zero unless txspeed is set) */ tx = vc->txslot; if (m->m_pkthdr.len > EN_TXSZ * 1024) { DBG(sc, TX, ("tx%zu: packet larger than xmit buffer " "(%d > %d)\n", tx - sc->txslot, m->m_pkthdr.len, EN_TXSZ * 1024)); EN_UNLOCK(sc); m_freem(m); uma_zfree(sc->map_zone, map); continue; } if (tx->mbsize > EN_TXHIWAT) { EN_COUNT(sc->stats.txmbovr); DBG(sc, TX, ("tx%d: buffer space shortage", tx - sc->txslot)); EN_UNLOCK(sc); m_freem(m); uma_zfree(sc->map_zone, map); continue; } /* commit */ tx->mbsize += m->m_pkthdr.len; DBG(sc, TX, ("tx%zu: VCI=%d, speed=0x%x, buflen=%d, mbsize=%d", tx - sc->txslot, vci, sc->vccs[vci]->txspeed, m->m_pkthdr.len, tx->mbsize)); MBUF_SET_TX(m, vci, flags, datalen, pad, map); _IF_ENQUEUE(&tx->q, m); en_txdma(sc, tx); EN_UNLOCK(sc); } } /*********************************************************************/ /* * VCs */ /* * en_loadvc: load a vc tab entry from a slot * * LOCK: locked, needed */ static void en_loadvc(struct en_softc *sc, struct en_vcc *vc) { uint32_t reg = en_read(sc, MID_VC(vc->vcc.vci)); reg = MIDV_SETMODE(reg, MIDV_TRASH); en_write(sc, MID_VC(vc->vcc.vci), reg); DELAY(27); /* no need to set CRC */ /* read pointer = 0, desc. start = 0 */ en_write(sc, MID_DST_RP(vc->vcc.vci), 0); /* write pointer = 0 */ en_write(sc, MID_WP_ST_CNT(vc->vcc.vci), 0); /* set mode, size, loc */ en_write(sc, MID_VC(vc->vcc.vci), vc->rxslot->mode); vc->rxslot->cur = vc->rxslot->start; DBG(sc, VC, ("rx%d: assigned to VCI %d", vc->rxslot - sc->rxslot, vc->vcc.vci)); } /* * Open the given vcc. * * LOCK: unlocked, needed */ static int en_open_vcc(struct en_softc *sc, struct atmio_openvcc *op) { uint32_t oldmode, newmode; struct en_rxslot *slot; struct en_vcc *vc; int error = 0; DBG(sc, IOCTL, ("enable vpi=%d, vci=%d, flags=%#x", op->param.vpi, op->param.vci, op->param.flags)); if (op->param.vpi != 0 || op->param.vci >= MID_N_VC) return (EINVAL); vc = uma_zalloc(en_vcc_zone, M_NOWAIT | M_ZERO); if (vc == NULL) return (ENOMEM); EN_LOCK(sc); if (sc->vccs[op->param.vci] != NULL) { error = EBUSY; goto done; } /* find a free receive slot */ for (slot = sc->rxslot; slot < &sc->rxslot[sc->en_nrx]; slot++) if (slot->vcc == NULL) break; if (slot == &sc->rxslot[sc->en_nrx]) { error = ENOSPC; goto done; } vc->rxslot = slot; vc->rxhand = op->rxhand; vc->vcc = op->param; oldmode = slot->mode; newmode = (op->param.aal == ATMIO_AAL_5) ? MIDV_AAL5 : MIDV_NOAAL; slot->mode = MIDV_SETMODE(oldmode, newmode); slot->vcc = vc; KASSERT (_IF_QLEN(&slot->indma) == 0 && _IF_QLEN(&slot->q) == 0, ("en_rxctl: left over mbufs on enable slot=%tu", vc->rxslot - sc->rxslot)); vc->txspeed = 0; vc->txslot = sc->txslot; vc->txslot->nref++; /* bump reference count */ en_loadvc(sc, vc); /* does debug printf for us */ /* don't free below */ sc->vccs[vc->vcc.vci] = vc; vc = NULL; sc->vccs_open++; done: if (vc != NULL) uma_zfree(en_vcc_zone, vc); EN_UNLOCK(sc); return (error); } /* * Close finished */ static void en_close_finish(struct en_softc *sc, struct en_vcc *vc) { if (vc->rxslot != NULL) vc->rxslot->vcc = NULL; DBG(sc, VC, ("vci: %u free (%p)", vc->vcc.vci, vc)); sc->vccs[vc->vcc.vci] = NULL; uma_zfree(en_vcc_zone, vc); sc->vccs_open--; } /* * LOCK: unlocked, needed */ static int en_close_vcc(struct en_softc *sc, struct atmio_closevcc *cl) { uint32_t oldmode, newmode; struct en_vcc *vc; int error = 0; DBG(sc, IOCTL, ("disable vpi=%d, vci=%d", cl->vpi, cl->vci)); if (cl->vpi != 0 || cl->vci >= MID_N_VC) return (EINVAL); EN_LOCK(sc); if ((vc = sc->vccs[cl->vci]) == NULL) { error = ENOTCONN; goto done; } /* * turn off VCI */ if (vc->rxslot == NULL) { error = ENOTCONN; goto done; } if (vc->vflags & VCC_DRAIN) { error = EINVAL; goto done; } oldmode = en_read(sc, MID_VC(cl->vci)); newmode = MIDV_SETMODE(oldmode, MIDV_TRASH) & ~MIDV_INSERVICE; en_write(sc, MID_VC(cl->vci), (newmode | (oldmode & MIDV_INSERVICE))); /* halt in tracks, be careful to preserve inservice bit */ DELAY(27); vc->rxslot->mode = newmode; vc->txslot->nref--; /* if stuff is still going on we are going to have to drain it out */ if (_IF_QLEN(&vc->rxslot->indma) == 0 && _IF_QLEN(&vc->rxslot->q) == 0 && (vc->vflags & VCC_SWSL) == 0) { en_close_finish(sc, vc); goto done; } vc->vflags |= VCC_DRAIN; DBG(sc, IOCTL, ("VCI %u now draining", cl->vci)); if (vc->vcc.flags & ATMIO_FLAG_ASYNC) goto done; vc->vflags |= VCC_CLOSE_RX; while ((sc->ifp->if_drv_flags & IFF_DRV_RUNNING) && (vc->vflags & VCC_DRAIN)) cv_wait(&sc->cv_close, &sc->en_mtx); en_close_finish(sc, vc); if (!(sc->ifp->if_drv_flags & IFF_DRV_RUNNING)) { error = EIO; goto done; } done: EN_UNLOCK(sc); return (error); } /*********************************************************************/ /* * starting/stopping the card */ /* * en_reset_ul: reset the board, throw away work in progress. * must en_init to recover. * * LOCK: locked, needed */ static void en_reset_ul(struct en_softc *sc) { struct en_map *map; struct mbuf *m; struct en_rxslot *rx; int lcv; if_printf(sc->ifp, "reset\n"); sc->ifp->if_drv_flags &= ~IFF_DRV_RUNNING; if (sc->en_busreset) sc->en_busreset(sc); en_write(sc, MID_RESID, 0x0); /* reset hardware */ /* * recv: dump any mbufs we are dma'ing into, if DRAINing, then a reset * will free us! Don't release the rxslot from the channel. */ for (lcv = 0 ; lcv < MID_N_VC ; lcv++) { if (sc->vccs[lcv] == NULL) continue; rx = sc->vccs[lcv]->rxslot; for (;;) { _IF_DEQUEUE(&rx->indma, m); if (m == NULL) break; map = (void *)m->m_pkthdr.rcvif; uma_zfree(sc->map_zone, map); m_freem(m); } for (;;) { _IF_DEQUEUE(&rx->q, m); if (m == NULL) break; m_freem(m); } sc->vccs[lcv]->vflags = 0; } /* * xmit: dump everything */ for (lcv = 0 ; lcv < EN_NTX ; lcv++) { for (;;) { _IF_DEQUEUE(&sc->txslot[lcv].indma, m); if (m == NULL) break; map = (void *)m->m_pkthdr.rcvif; uma_zfree(sc->map_zone, map); m_freem(m); } for (;;) { _IF_DEQUEUE(&sc->txslot[lcv].q, m); if (m == NULL) break; map = (void *)m->m_pkthdr.rcvif; uma_zfree(sc->map_zone, map); m_freem(m); } sc->txslot[lcv].mbsize = 0; } /* * Unstop all waiters */ cv_broadcast(&sc->cv_close); } /* * en_reset: reset the board, throw away work in progress. * must en_init to recover. * * LOCK: unlocked, needed * * Use en_reset_ul if you alreay have the lock */ void en_reset(struct en_softc *sc) { EN_LOCK(sc); en_reset_ul(sc); EN_UNLOCK(sc); } /* * en_init: init board and sync the card with the data in the softc. * * LOCK: locked, needed */ static void en_init(struct en_softc *sc) { int vc, slot; uint32_t loc; if ((sc->ifp->if_flags & IFF_UP) == 0) { DBG(sc, INIT, ("going down")); en_reset(sc); /* to be safe */ return; } DBG(sc, INIT, ("going up")); sc->ifp->if_drv_flags |= IFF_DRV_RUNNING; /* enable */ if (sc->en_busreset) sc->en_busreset(sc); en_write(sc, MID_RESID, 0x0); /* reset */ /* zero memory */ bus_space_set_region_4(sc->en_memt, sc->en_base, MID_RAMOFF, 0, sc->en_obmemsz / 4); /* * init obmem data structures: vc tab, dma q's, slist. * * note that we set drq_free/dtq_free to one less than the total number * of DTQ/DRQs present. we do this because the card uses the condition * (drq_chip == drq_us) to mean "list is empty"... but if you allow the * circular list to be completely full then (drq_chip == drq_us) [i.e. * the drq_us pointer will wrap all the way around]. by restricting * the number of active requests to (N - 1) we prevent the list from * becoming completely full. note that the card will sometimes give * us an interrupt for a DTQ/DRQ we have already processes... this helps * keep that interrupt from messing us up. */ bzero(&sc->drq, sizeof(sc->drq)); sc->drq_free = MID_DRQ_N - 1; sc->drq_chip = MID_DRQ_REG2A(en_read(sc, MID_DMA_RDRX)); en_write(sc, MID_DMA_WRRX, MID_DRQ_A2REG(sc->drq_chip)); sc->drq_us = sc->drq_chip; bzero(&sc->dtq, sizeof(sc->dtq)); sc->dtq_free = MID_DTQ_N - 1; sc->dtq_chip = MID_DTQ_REG2A(en_read(sc, MID_DMA_RDTX)); en_write(sc, MID_DMA_WRTX, MID_DRQ_A2REG(sc->dtq_chip)); sc->dtq_us = sc->dtq_chip; sc->hwslistp = MID_SL_REG2A(en_read(sc, MID_SERV_WRITE)); sc->swsl_size = sc->swsl_head = sc->swsl_tail = 0; DBG(sc, INIT, ("drq free/chip: %d/0x%x, dtq free/chip: %d/0x%x, " "hwslist: 0x%x", sc->drq_free, sc->drq_chip, sc->dtq_free, sc->dtq_chip, sc->hwslistp)); for (slot = 0 ; slot < EN_NTX ; slot++) { sc->txslot[slot].bfree = EN_TXSZ * 1024; en_write(sc, MIDX_READPTR(slot), 0); en_write(sc, MIDX_DESCSTART(slot), 0); loc = sc->txslot[slot].cur = sc->txslot[slot].start; loc = loc - MID_RAMOFF; /* mask, cvt to words */ loc = (loc & ~((EN_TXSZ * 1024) - 1)) >> 2; /* top 11 bits */ loc = loc >> MIDV_LOCTOPSHFT; en_write(sc, MIDX_PLACE(slot), MIDX_MKPLACE(en_k2sz(EN_TXSZ), loc)); DBG(sc, INIT, ("tx%d: place 0x%x", slot, (u_int)en_read(sc, MIDX_PLACE(slot)))); } for (vc = 0; vc < MID_N_VC; vc++) if (sc->vccs[vc] != NULL) en_loadvc(sc, sc->vccs[vc]); /* * enable! */ en_write(sc, MID_INTENA, MID_INT_TX | MID_INT_DMA_OVR | MID_INT_IDENT | MID_INT_LERR | MID_INT_DMA_ERR | MID_INT_DMA_RX | MID_INT_DMA_TX | MID_INT_SERVICE | MID_INT_SUNI | MID_INT_STATS); en_write(sc, MID_MAST_CSR, MID_SETIPL(sc->ipl) | MID_MCSR_ENDMA | MID_MCSR_ENTX | MID_MCSR_ENRX); } /*********************************************************************/ /* * Ioctls */ /* * en_ioctl: handle ioctl requests * * NOTE: if you add an ioctl to set txspeed, you should choose a new * TX channel/slot. Choose the one with the lowest sc->txslot[slot].nref * value, subtract one from sc->txslot[0].nref, add one to the * sc->txslot[slot].nref, set sc->txvc2slot[vci] = slot, and then set * txspeed[vci]. * * LOCK: unlocked, needed */ static int en_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct en_softc *sc = (struct en_softc *)ifp->if_softc; struct ifaddr *ifa = (struct ifaddr *)data; struct ifreq *ifr = (struct ifreq *)data; struct atmio_vcctable *vtab; int error = 0; switch (cmd) { case SIOCSIFADDR: EN_LOCK(sc); ifp->if_flags |= IFF_UP; #if defined(INET) || defined(INET6) if (ifa->ifa_addr->sa_family == AF_INET || ifa->ifa_addr->sa_family == AF_INET6) { if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { en_reset_ul(sc); en_init(sc); } ifa->ifa_rtrequest = atm_rtrequest; /* ??? */ EN_UNLOCK(sc); break; } #endif /* INET */ if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { en_reset_ul(sc); en_init(sc); } EN_UNLOCK(sc); break; case SIOCSIFFLAGS: EN_LOCK(sc); if (ifp->if_flags & IFF_UP) { if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) en_init(sc); } else { if (ifp->if_drv_flags & IFF_DRV_RUNNING) en_reset_ul(sc); } EN_UNLOCK(sc); break; case SIOCSIFMTU: /* * Set the interface MTU. */ if (ifr->ifr_mtu > ATMMTU) { error = EINVAL; break; } ifp->if_mtu = ifr->ifr_mtu; break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->media, cmd); break; case SIOCATMOPENVCC: /* kernel internal use */ error = en_open_vcc(sc, (struct atmio_openvcc *)data); break; case SIOCATMCLOSEVCC: /* kernel internal use */ error = en_close_vcc(sc, (struct atmio_closevcc *)data); break; case SIOCATMGETVCCS: /* internal netgraph use */ vtab = atm_getvccs((struct atmio_vcc **)sc->vccs, MID_N_VC, sc->vccs_open, &sc->en_mtx, 0); if (vtab == NULL) { error = ENOMEM; break; } *(void **)data = vtab; break; case SIOCATMGVCCS: /* return vcc table */ vtab = atm_getvccs((struct atmio_vcc **)sc->vccs, MID_N_VC, sc->vccs_open, &sc->en_mtx, 1); error = copyout(vtab, ifr->ifr_data, sizeof(*vtab) + vtab->count * sizeof(vtab->vccs[0])); free(vtab, M_DEVBUF); break; default: error = EINVAL; break; } return (error); } /*********************************************************************/ /* * Sysctl's */ /* * Sysctl handler for internal statistics * * LOCK: unlocked, needed */ static int en_sysctl_istats(SYSCTL_HANDLER_ARGS) { struct en_softc *sc = arg1; uint32_t *ret; int error; ret = malloc(sizeof(sc->stats), M_TEMP, M_WAITOK); EN_LOCK(sc); bcopy(&sc->stats, ret, sizeof(sc->stats)); EN_UNLOCK(sc); error = SYSCTL_OUT(req, ret, sizeof(sc->stats)); free(ret, M_TEMP); return (error); } /*********************************************************************/ /* * Interrupts */ /* * Transmit interrupt handler * * check for tx complete, if detected then this means that some space * has come free on the card. we must account for it and arrange to * kick the channel to life (in case it is stalled waiting on the card). * * LOCK: locked, needed */ static uint32_t en_intr_tx(struct en_softc *sc, uint32_t reg) { uint32_t kick; uint32_t mask; uint32_t val; int chan; kick = 0; /* bitmask of channels to kick */ for (mask = 1, chan = 0; chan < EN_NTX; chan++, mask *= 2) { if (!(reg & MID_TXCHAN(chan))) continue; kick = kick | mask; /* current read pointer */ val = en_read(sc, MIDX_READPTR(chan)); /* as offset */ val = (val * sizeof(uint32_t)) + sc->txslot[chan].start; if (val > sc->txslot[chan].cur) sc->txslot[chan].bfree = val - sc->txslot[chan].cur; else sc->txslot[chan].bfree = (val + (EN_TXSZ * 1024)) - sc->txslot[chan].cur; DBG(sc, INTR, ("tx%d: transmit done. %d bytes now free in " "buffer", chan, sc->txslot[chan].bfree)); } return (kick); } /* * TX DMA interrupt * * check for TX DMA complete, if detected then this means * that some DTQs are now free. it also means some indma * mbufs can be freed. if we needed DTQs, kick all channels. * * LOCK: locked, needed */ static uint32_t en_intr_tx_dma(struct en_softc *sc) { uint32_t kick = 0; uint32_t val; uint32_t idx; uint32_t slot; uint32_t dtq; struct en_map *map; struct mbuf *m; val = en_read(sc, MID_DMA_RDTX); /* chip's current location */ idx = MID_DTQ_A2REG(sc->dtq_chip); /* where we last saw chip */ if (sc->need_dtqs) { kick = MID_NTX_CH - 1; /* assume power of 2, kick all! */ sc->need_dtqs = 0; /* recalculated in "kick" loop below */ DBG(sc, INTR, ("cleared need DTQ condition")); } while (idx != val) { sc->dtq_free++; if ((dtq = sc->dtq[idx]) != 0) { /* don't forget to zero it out when done */ sc->dtq[idx] = 0; slot = EN_DQ_SLOT(dtq); _IF_DEQUEUE(&sc->txslot[slot].indma, m); if (m == NULL) panic("enintr: dtqsync"); map = (void *)m->m_pkthdr.rcvif; uma_zfree(sc->map_zone, map); m_freem(m); sc->txslot[slot].mbsize -= EN_DQ_LEN(dtq); DBG(sc, INTR, ("tx%d: free %d dma bytes, mbsize now " "%d", slot, EN_DQ_LEN(dtq), sc->txslot[slot].mbsize)); } EN_WRAPADD(0, MID_DTQ_N, idx, 1); } sc->dtq_chip = MID_DTQ_REG2A(val); /* sync softc */ return (kick); } /* * Service interrupt * * LOCK: locked, needed */ static int en_intr_service(struct en_softc *sc) { uint32_t chip; uint32_t vci; int need_softserv = 0; struct en_vcc *vc; chip = MID_SL_REG2A(en_read(sc, MID_SERV_WRITE)); while (sc->hwslistp != chip) { /* fetch and remove it from hardware service list */ vci = en_read(sc, sc->hwslistp); EN_WRAPADD(MID_SLOFF, MID_SLEND, sc->hwslistp, 4); if ((vc = sc->vccs[vci]) == NULL || (vc->vcc.flags & ATMIO_FLAG_NORX)) { DBG(sc, INTR, ("unexpected rx interrupt VCI %d", vci)); en_write(sc, MID_VC(vci), MIDV_TRASH); /* rx off */ continue; } /* remove from hwsl */ en_write(sc, MID_VC(vci), vc->rxslot->mode); EN_COUNT(sc->stats.hwpull); DBG(sc, INTR, ("pulled VCI %d off hwslist", vci)); /* add it to the software service list (if needed) */ if ((vc->vflags & VCC_SWSL) == 0) { EN_COUNT(sc->stats.swadd); need_softserv = 1; vc->vflags |= VCC_SWSL; sc->swslist[sc->swsl_tail] = vci; EN_WRAPADD(0, MID_SL_N, sc->swsl_tail, 1); sc->swsl_size++; DBG(sc, INTR, ("added VCI %d to swslist", vci)); } } return (need_softserv); } /* * Handle a receive DMA completion */ static void en_rx_drain(struct en_softc *sc, u_int drq) { struct en_rxslot *slot; struct en_vcc *vc; struct mbuf *m; struct atm_pseudohdr ah; slot = &sc->rxslot[EN_DQ_SLOT(drq)]; m = NULL; /* assume "JK" trash DMA */ if (EN_DQ_LEN(drq) != 0) { _IF_DEQUEUE(&slot->indma, m); KASSERT(m != NULL, ("drqsync: %s: lost mbuf in slot %zu!", sc->ifp->if_xname, slot - sc->rxslot)); uma_zfree(sc->map_zone, (struct en_map *)m->m_pkthdr.rcvif); } if ((vc = slot->vcc) == NULL) { /* ups */ if (m != NULL) m_freem(m); return; } /* do something with this mbuf */ if (vc->vflags & VCC_DRAIN) { /* drain? */ if (m != NULL) m_freem(m); if (_IF_QLEN(&slot->indma) == 0 && _IF_QLEN(&slot->q) == 0 && (en_read(sc, MID_VC(vc->vcc.vci)) & MIDV_INSERVICE) == 0 && (vc->vflags & VCC_SWSL) == 0) { vc->vflags &= ~VCC_CLOSE_RX; if (vc->vcc.flags & ATMIO_FLAG_ASYNC) en_close_finish(sc, vc); else cv_signal(&sc->cv_close); } return; } if (m != NULL) { ATM_PH_FLAGS(&ah) = vc->vcc.flags; ATM_PH_VPI(&ah) = 0; ATM_PH_SETVCI(&ah, vc->vcc.vci); DBG(sc, INTR, ("rx%zu: rxvci%d: atm_input, mbuf %p, len %d, " "hand %p", slot - sc->rxslot, vc->vcc.vci, m, EN_DQ_LEN(drq), vc->rxhand)); m->m_pkthdr.rcvif = sc->ifp; sc->ifp->if_ipackets++; vc->ipackets++; vc->ibytes += m->m_pkthdr.len; #ifdef EN_DEBUG if (sc->debug & DBG_IPACKETS) en_dump_packet(sc, m); #endif #ifdef ENABLE_BPF BPF_MTAP(sc->ifp, m); #endif atm_input(sc->ifp, &ah, m, vc->rxhand); } } /* * check for RX DMA complete, and pass the data "upstairs" * * LOCK: locked, needed */ static int en_intr_rx_dma(struct en_softc *sc) { uint32_t val; uint32_t idx; uint32_t drq; val = en_read(sc, MID_DMA_RDRX); /* chip's current location */ idx = MID_DRQ_A2REG(sc->drq_chip); /* where we last saw chip */ while (idx != val) { sc->drq_free++; if ((drq = sc->drq[idx]) != 0) { /* don't forget to zero it out when done */ sc->drq[idx] = 0; en_rx_drain(sc, drq); } EN_WRAPADD(0, MID_DRQ_N, idx, 1); } sc->drq_chip = MID_DRQ_REG2A(val); /* sync softc */ if (sc->need_drqs) { /* true if we had a DRQ shortage */ sc->need_drqs = 0; DBG(sc, INTR, ("cleared need DRQ condition")); return (1); } else return (0); } /* * en_mget: get an mbuf chain that can hold totlen bytes and return it * (for recv). For the actual allocation totlen is rounded up to a multiple * of 4. We also ensure, that each mbuf has a multiple of 4 bytes. * * After this call the sum of all the m_len's in the chain will be totlen. * This is called at interrupt time, so we can't wait here. * * LOCK: any, not needed */ static struct mbuf * en_mget(struct en_softc *sc, u_int pktlen) { struct mbuf *m, *tmp; u_int totlen, pad; totlen = roundup(pktlen, sizeof(uint32_t)); pad = totlen - pktlen; /* * First get an mbuf with header. Keep space for a couple of * words at the begin. */ /* called from interrupt context */ MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (NULL); m->m_pkthdr.rcvif = NULL; m->m_pkthdr.len = pktlen; m->m_len = EN_RX1BUF; MH_ALIGN(m, EN_RX1BUF); if (m->m_len >= totlen) { m->m_len = totlen; } else { totlen -= m->m_len; /* called from interrupt context */ tmp = m_getm(m, totlen, M_DONTWAIT, MT_DATA); if (tmp == NULL) { m_free(m); return (NULL); } tmp = m->m_next; /* m_getm could do this for us */ while (tmp != NULL) { tmp->m_len = min(MCLBYTES, totlen); totlen -= tmp->m_len; tmp = tmp->m_next; } } return (m); } /* * Argument for RX DMAMAP loader. */ struct rxarg { struct en_softc *sc; struct mbuf *m; u_int pre_skip; /* number of bytes to skip at begin */ u_int post_skip; /* number of bytes to skip at end */ struct en_vcc *vc; /* vc we are receiving on */ int wait; /* wait for DRQ entries */ }; /* * Copy the segment table to the buffer for later use. And compute the * number of dma queue entries we need. * * LOCK: locked, needed */ static void en_rxdma_load(void *uarg, bus_dma_segment_t *segs, int nseg, bus_size_t mapsize, int error) { struct rxarg *rx = uarg; struct en_softc *sc = rx->sc; struct en_rxslot *slot = rx->vc->rxslot; u_int free; /* number of free DRQ entries */ uint32_t cur; /* current buffer offset */ uint32_t drq; /* DRQ entry pointer */ uint32_t last_drq; /* where we have written last */ u_int needalign, cnt, count, bcode; bus_addr_t addr; bus_size_t rest; int i; if (error != 0) return; if (nseg > EN_MAX_DMASEG) panic("too many DMA segments"); rx->wait = 0; free = sc->drq_free; drq = sc->drq_us; cur = slot->cur; last_drq = 0; /* * Local macro to add an entry to the receive DMA area. If there * are no entries left, return. Save the byte offset of the entry * in last_drq for later use. */ #define PUT_DRQ_ENTRY(ENI, BCODE, COUNT, ADDR) \ if (free == 0) { \ EN_COUNT(sc->stats.rxdrqout); \ rx->wait = 1; \ return; \ } \ last_drq = drq; \ en_write(sc, drq + 0, (ENI || !sc->is_adaptec) ? \ MID_MK_RXQ_ENI(COUNT, rx->vc->vcc.vci, 0, BCODE) : \ MID_MK_RXQ_ADP(COUNT, rx->vc->vcc.vci, 0, BCODE)); \ en_write(sc, drq + 4, ADDR); \ \ EN_WRAPADD(MID_DRQOFF, MID_DRQEND, drq, 8); \ free--; /* * Local macro to generate a DMA entry to DMA cnt bytes. Updates * the current buffer byte offset accordingly. */ #define DO_DRQ(TYPE) do { \ rest -= cnt; \ EN_WRAPADD(slot->start, slot->stop, cur, cnt); \ DBG(sc, SERV, ("rx%td: "TYPE" %u bytes, %ju left, cur %#x", \ slot - sc->rxslot, cnt, (uintmax_t)rest, cur)); \ \ PUT_DRQ_ENTRY(1, bcode, count, addr); \ \ addr += cnt; \ } while (0) /* * Skip the RBD at the beginning */ if (rx->pre_skip > 0) { /* update DMA address */ EN_WRAPADD(slot->start, slot->stop, cur, rx->pre_skip); PUT_DRQ_ENTRY(0, MIDDMA_JK, WORD_IDX(slot->start, cur), 0); } for (i = 0; i < nseg; i++, segs++) { addr = segs->ds_addr; rest = segs->ds_len; if (sc->is_adaptec) { /* adaptec card - simple */ /* advance the on-card buffer pointer */ EN_WRAPADD(slot->start, slot->stop, cur, rest); DBG(sc, SERV, ("rx%td: adp %ju bytes %#jx " "(cur now 0x%x)", slot - sc->rxslot, (uintmax_t)rest, (uintmax_t)addr, cur)); PUT_DRQ_ENTRY(0, 0, rest, addr); continue; } /* * do we need to do a DMA op to align to the maximum * burst? Note, that we are alway 32-bit aligned. */ if (sc->alburst && (needalign = (addr & sc->bestburstmask)) != 0) { /* compute number of bytes, words and code */ cnt = sc->bestburstlen - needalign; if (cnt > rest) cnt = rest; count = cnt / sizeof(uint32_t); if (sc->noalbursts) { bcode = MIDDMA_WORD; } else { bcode = en_dmaplan[count].bcode; count = cnt >> en_dmaplan[count].divshift; } DO_DRQ("al_dma"); } /* do we need to do a max-sized burst? */ if (rest >= sc->bestburstlen) { count = rest >> sc->bestburstshift; cnt = count << sc->bestburstshift; bcode = sc->bestburstcode; DO_DRQ("best_dma"); } /* do we need to do a cleanup burst? */ if (rest != 0) { cnt = rest; count = rest / sizeof(uint32_t); if (sc->noalbursts) { bcode = MIDDMA_WORD; } else { bcode = en_dmaplan[count].bcode; count = cnt >> en_dmaplan[count].divshift; } DO_DRQ("clean_dma"); } } /* * Skip stuff at the end */ if (rx->post_skip > 0) { /* update DMA address */ EN_WRAPADD(slot->start, slot->stop, cur, rx->post_skip); PUT_DRQ_ENTRY(0, MIDDMA_JK, WORD_IDX(slot->start, cur), 0); } /* record the end for the interrupt routine */ sc->drq[MID_DRQ_A2REG(last_drq)] = EN_DQ_MK(slot - sc->rxslot, rx->m->m_pkthdr.len); /* set the end flag in the last descriptor */ en_write(sc, last_drq + 0, SETQ_END(sc, en_read(sc, last_drq + 0))); #undef PUT_DRQ_ENTRY #undef DO_DRQ /* commit */ slot->cur = cur; sc->drq_free = free; sc->drq_us = drq; /* signal to card */ en_write(sc, MID_DMA_WRRX, MID_DRQ_A2REG(sc->drq_us)); } /* * en_service: handle a service interrupt * * Q: why do we need a software service list? * * A: if we remove a VCI from the hardware list and we find that we are * out of DRQs we must defer processing until some DRQs become free. * so we must remember to look at this RX VCI/slot later, but we can't * put it back on the hardware service list (since that isn't allowed). * so we instead save it on the software service list. it would be nice * if we could peek at the VCI on top of the hwservice list without removing * it, however this leads to a race condition: if we peek at it and * decide we are done with it new data could come in before we have a * chance to remove it from the hwslist. by the time we get it out of * the list the interrupt for the new data will be lost. oops! * * LOCK: locked, needed */ static void en_service(struct en_softc *sc) { struct mbuf *m, *lastm; struct en_map *map; struct rxarg rx; uint32_t cur; uint32_t dstart; /* data start (as reported by card) */ uint32_t rbd; /* receive buffer descriptor */ uint32_t pdu; /* AAL5 trailer */ int mlen; int error; struct en_rxslot *slot; struct en_vcc *vc; rx.sc = sc; next_vci: if (sc->swsl_size == 0) { DBG(sc, SERV, ("en_service done")); return; } /* * get vcc to service */ rx.vc = vc = sc->vccs[sc->swslist[sc->swsl_head]]; slot = vc->rxslot; KASSERT (slot->vcc->rxslot == slot, ("en_service: rx slot/vci sync")); /* * determine our mode and if we've got any work to do */ DBG(sc, SERV, ("rx%td: service vci=%d start/stop/cur=0x%x 0x%x " "0x%x", slot - sc->rxslot, vc->vcc.vci, slot->start, slot->stop, slot->cur)); same_vci: cur = slot->cur; dstart = MIDV_DSTART(en_read(sc, MID_DST_RP(vc->vcc.vci))); dstart = (dstart * sizeof(uint32_t)) + slot->start; /* check to see if there is any data at all */ if (dstart == cur) { EN_WRAPADD(0, MID_SL_N, sc->swsl_head, 1); /* remove from swslist */ vc->vflags &= ~VCC_SWSL; sc->swsl_size--; DBG(sc, SERV, ("rx%td: remove vci %d from swslist", slot - sc->rxslot, vc->vcc.vci)); goto next_vci; } /* * figure out how many bytes we need * [mlen = # bytes to go in mbufs] */ rbd = en_read(sc, cur); if (MID_RBD_ID(rbd) != MID_RBD_STDID) panic("en_service: id mismatch"); if (rbd & MID_RBD_T) { mlen = 0; /* we've got trash */ rx.pre_skip = MID_RBD_SIZE; rx.post_skip = 0; EN_COUNT(sc->stats.ttrash); DBG(sc, SERV, ("RX overflow lost %d cells!", MID_RBD_CNT(rbd))); } else if (vc->vcc.aal != ATMIO_AAL_5) { /* 1 cell (ick!) */ mlen = MID_CHDR_SIZE + MID_ATMDATASZ; rx.pre_skip = MID_RBD_SIZE; rx.post_skip = 0; } else { rx.pre_skip = MID_RBD_SIZE; /* get PDU trailer in correct byte order */ pdu = cur + MID_RBD_CNT(rbd) * MID_ATMDATASZ + MID_RBD_SIZE - MID_PDU_SIZE; if (pdu >= slot->stop) pdu -= EN_RXSZ * 1024; pdu = en_read(sc, pdu); if (MID_RBD_CNT(rbd) * MID_ATMDATASZ < MID_PDU_LEN(pdu)) { if_printf(sc->ifp, "invalid AAL5 length\n"); rx.post_skip = MID_RBD_CNT(rbd) * MID_ATMDATASZ; mlen = 0; sc->ifp->if_ierrors++; } else if (rbd & MID_RBD_CRCERR) { if_printf(sc->ifp, "CRC error\n"); rx.post_skip = MID_RBD_CNT(rbd) * MID_ATMDATASZ; mlen = 0; sc->ifp->if_ierrors++; } else { mlen = MID_PDU_LEN(pdu); rx.post_skip = MID_RBD_CNT(rbd) * MID_ATMDATASZ - mlen; } } /* * now allocate mbufs for mlen bytes of data, if out of mbufs, trash all * * notes: * 1. it is possible that we've already allocated an mbuf for this pkt * but ran out of DRQs, in which case we saved the allocated mbuf * on "q". * 2. if we save an buf in "q" we store the "cur" (pointer) in the * buf as an identity (that we can check later). * 3. after this block of code, if m is still NULL then we ran out of * mbufs */ _IF_DEQUEUE(&slot->q, m); if (m != NULL) { if (m->m_pkthdr.csum_data != cur) { /* wasn't ours */ DBG(sc, SERV, ("rx%td: q'ed buf %p not ours", slot - sc->rxslot, m)); _IF_PREPEND(&slot->q, m); m = NULL; EN_COUNT(sc->stats.rxqnotus); } else { EN_COUNT(sc->stats.rxqus); DBG(sc, SERV, ("rx%td: recovered q'ed buf %p", slot - sc->rxslot, m)); } } if (mlen == 0 && m != NULL) { /* should not happen */ m_freem(m); m = NULL; } if (mlen != 0 && m == NULL) { m = en_mget(sc, mlen); if (m == NULL) { rx.post_skip += mlen; mlen = 0; EN_COUNT(sc->stats.rxmbufout); DBG(sc, SERV, ("rx%td: out of mbufs", slot - sc->rxslot)); } else rx.post_skip -= roundup(mlen, sizeof(uint32_t)) - mlen; DBG(sc, SERV, ("rx%td: allocate buf %p, mlen=%d", slot - sc->rxslot, m, mlen)); } DBG(sc, SERV, ("rx%td: VCI %d, rbuf %p, mlen %d, skip %u/%u", slot - sc->rxslot, vc->vcc.vci, m, mlen, rx.pre_skip, rx.post_skip)); if (m != NULL) { /* M_NOWAIT - called from interrupt context */ map = uma_zalloc_arg(sc->map_zone, sc, M_NOWAIT); if (map == NULL) { rx.post_skip += mlen; m_freem(m); DBG(sc, SERV, ("rx%td: out of maps", slot - sc->rxslot)); goto skip; } rx.m = m; error = bus_dmamap_load_mbuf(sc->txtag, map->map, m, en_rxdma_load, &rx, BUS_DMA_NOWAIT); if (error != 0) { if_printf(sc->ifp, "loading RX map failed " "%d\n", error); uma_zfree(sc->map_zone, map); m_freem(m); rx.post_skip += mlen; goto skip; } map->flags |= ENMAP_LOADED; if (rx.wait) { /* out of DRQs - wait */ uma_zfree(sc->map_zone, map); m->m_pkthdr.csum_data = cur; _IF_ENQUEUE(&slot->q, m); EN_COUNT(sc->stats.rxdrqout); sc->need_drqs = 1; /* flag condition */ return; } (void)m_length(m, &lastm); lastm->m_len -= roundup(mlen, sizeof(uint32_t)) - mlen; m->m_pkthdr.rcvif = (void *)map; _IF_ENQUEUE(&slot->indma, m); /* get next packet in this slot */ goto same_vci; } skip: /* * Here we end if we should drop the packet from the receive buffer. * The number of bytes to drop is in fill. We can do this with on * JK entry. If we don't even have that one - wait. */ if (sc->drq_free == 0) { sc->need_drqs = 1; /* flag condition */ return; } rx.post_skip += rx.pre_skip; DBG(sc, SERV, ("rx%td: skipping %u", slot - sc->rxslot, rx.post_skip)); /* advance buffer address */ EN_WRAPADD(slot->start, slot->stop, cur, rx.post_skip); /* write DRQ entry */ if (sc->is_adaptec) en_write(sc, sc->drq_us, MID_MK_RXQ_ADP(WORD_IDX(slot->start, cur), vc->vcc.vci, MID_DMA_END, MIDDMA_JK)); else en_write(sc, sc->drq_us, MID_MK_RXQ_ENI(WORD_IDX(slot->start, cur), vc->vcc.vci, MID_DMA_END, MIDDMA_JK)); en_write(sc, sc->drq_us + 4, 0); EN_WRAPADD(MID_DRQOFF, MID_DRQEND, sc->drq_us, 8); sc->drq_free--; /* signal to RX interrupt */ sc->drq[MID_DRQ_A2REG(sc->drq_us)] = EN_DQ_MK(slot - sc->rxslot, 0); slot->cur = cur; /* signal to card */ en_write(sc, MID_DMA_WRRX, MID_DRQ_A2REG(sc->drq_us)); goto same_vci; } /* * interrupt handler * * LOCK: unlocked, needed */ void en_intr(void *arg) { struct en_softc *sc = arg; uint32_t reg, kick, mask; int lcv, need_softserv; EN_LOCK(sc); reg = en_read(sc, MID_INTACK); DBG(sc, INTR, ("interrupt=0x%b", reg, MID_INTBITS)); if ((reg & MID_INT_ANY) == 0) { EN_UNLOCK(sc); return; } /* * unexpected errors that need a reset */ if ((reg & (MID_INT_IDENT | MID_INT_LERR | MID_INT_DMA_ERR)) != 0) { if_printf(sc->ifp, "unexpected interrupt=0x%b, " "resetting\n", reg, MID_INTBITS); #ifdef EN_DEBUG kdb_enter("en: unexpected error"); sc->ifp->if_drv_flags &= ~IFF_DRV_RUNNING; /* FREEZE! */ #else en_reset_ul(sc); en_init(sc); #endif EN_UNLOCK(sc); return; } if (reg & MID_INT_SUNI) utopia_intr(&sc->utopia); kick = 0; if (reg & MID_INT_TX) kick |= en_intr_tx(sc, reg); if (reg & MID_INT_DMA_TX) kick |= en_intr_tx_dma(sc); /* * kick xmit channels as needed. */ if (kick) { DBG(sc, INTR, ("tx kick mask = 0x%x", kick)); for (mask = 1, lcv = 0 ; lcv < EN_NTX ; lcv++, mask = mask * 2) if ((kick & mask) && _IF_QLEN(&sc->txslot[lcv].q) != 0) en_txdma(sc, &sc->txslot[lcv]); } need_softserv = 0; if (reg & MID_INT_DMA_RX) need_softserv |= en_intr_rx_dma(sc); if (reg & MID_INT_SERVICE) need_softserv |= en_intr_service(sc); if (need_softserv) en_service(sc); /* * keep our stats */ if (reg & MID_INT_DMA_OVR) { EN_COUNT(sc->stats.dmaovr); DBG(sc, INTR, ("MID_INT_DMA_OVR")); } reg = en_read(sc, MID_STAT); sc->stats.otrash += MID_OTRASH(reg); sc->stats.vtrash += MID_VTRASH(reg); EN_UNLOCK(sc); } /* * Read at most n SUNI regs starting at reg into val */ static int en_utopia_readregs(struct ifatm *ifatm, u_int reg, uint8_t *val, u_int *n) { struct en_softc *sc = ifatm->ifp->if_softc; u_int i; EN_CHECKLOCK(sc); if (reg >= MID_NSUNI) return (EINVAL); if (reg + *n > MID_NSUNI) *n = MID_NSUNI - reg; for (i = 0; i < *n; i++) val[i] = en_read(sc, MID_SUNIOFF + 4 * (reg + i)); return (0); } /* * change the bits given by mask to them in val in register reg */ static int en_utopia_writereg(struct ifatm *ifatm, u_int reg, u_int mask, u_int val) { struct en_softc *sc = ifatm->ifp->if_softc; uint32_t regval; EN_CHECKLOCK(sc); if (reg >= MID_NSUNI) return (EINVAL); regval = en_read(sc, MID_SUNIOFF + 4 * reg); regval = (regval & ~mask) | (val & mask); en_write(sc, MID_SUNIOFF + 4 * reg, regval); return (0); } static const struct utopia_methods en_utopia_methods = { en_utopia_readregs, en_utopia_writereg }; /*********************************************************************/ /* * Probing the DMA brokeness of the card */ /* * Physical address load helper function for DMA probe * * LOCK: unlocked, not needed */ static void en_dmaprobe_load(void *uarg, bus_dma_segment_t *segs, int nseg, int error) { if (error == 0) *(bus_addr_t *)uarg = segs[0].ds_addr; } /* * en_dmaprobe: helper function for en_attach. * * see how the card handles DMA by running a few DMA tests. we need * to figure out the largest number of bytes we can DMA in one burst * ("bestburstlen"), and if the starting address for a burst needs to * be aligned on any sort of boundary or not ("alburst"). * * Things turn out more complex than that, because on my (harti) brand * new motherboard (2.4GHz) we can do 64byte aligned DMAs, but everything * we more than 4 bytes fails (with an RX DMA timeout) for physical * addresses that end with 0xc. Therefor we search not only the largest * burst that is supported (hopefully 64) but also check what is the largerst * unaligned supported size. If that appears to be lesser than 4 words, * set the noalbursts flag. That will be set only if also alburst is set. */ /* * en_dmaprobe_doit: do actual testing for the DMA test. * Cycle through all bursts sizes from 8 up to 64 and try whether it works. * Return the largest one that works. * * LOCK: unlocked, not needed */ static int en_dmaprobe_doit(struct en_softc *sc, uint8_t *sp, bus_addr_t psp) { uint8_t *dp = sp + MIDDMA_MAXBURST; bus_addr_t pdp = psp + MIDDMA_MAXBURST; int lcv, retval = 4, cnt; uint32_t reg, bcode, midvloc; if (sc->en_busreset) sc->en_busreset(sc); en_write(sc, MID_RESID, 0x0); /* reset card before touching RAM */ /* * set up a 1k buffer at MID_BUFOFF */ midvloc = ((MID_BUFOFF - MID_RAMOFF) / sizeof(uint32_t)) >> MIDV_LOCTOPSHFT; en_write(sc, MIDX_PLACE(0), MIDX_MKPLACE(en_k2sz(1), midvloc)); en_write(sc, MID_VC(0), (midvloc << MIDV_LOCSHIFT) | (en_k2sz(1) << MIDV_SZSHIFT) | MIDV_TRASH); en_write(sc, MID_DST_RP(0), 0); en_write(sc, MID_WP_ST_CNT(0), 0); /* set up sample data */ for (lcv = 0 ; lcv < MIDDMA_MAXBURST; lcv++) sp[lcv] = lcv + 1; /* enable DMA (only) */ en_write(sc, MID_MAST_CSR, MID_MCSR_ENDMA); sc->drq_chip = MID_DRQ_REG2A(en_read(sc, MID_DMA_RDRX)); sc->dtq_chip = MID_DTQ_REG2A(en_read(sc, MID_DMA_RDTX)); /* * try it now . . . DMA it out, then DMA it back in and compare * * note: in order to get the dma stuff to reverse directions it wants * the "end" flag set! since we are not dma'ing valid data we may * get an ident mismatch interrupt (which we will ignore). */ DBG(sc, DMA, ("test sp=%p/%#lx, dp=%p/%#lx", sp, (u_long)psp, dp, (u_long)pdp)); for (lcv = 8 ; lcv <= MIDDMA_MAXBURST ; lcv = lcv * 2) { DBG(sc, DMA, ("test lcv=%d", lcv)); /* zero SRAM and dest buffer */ bus_space_set_region_4(sc->en_memt, sc->en_base, MID_BUFOFF, 0, 1024 / 4); bzero(dp, MIDDMA_MAXBURST); bcode = en_sz2b(lcv); /* build lcv-byte-DMA x NBURSTS */ if (sc->is_adaptec) en_write(sc, sc->dtq_chip, MID_MK_TXQ_ADP(lcv, 0, MID_DMA_END, 0)); else en_write(sc, sc->dtq_chip, MID_MK_TXQ_ENI(1, 0, MID_DMA_END, bcode)); en_write(sc, sc->dtq_chip + 4, psp); EN_WRAPADD(MID_DTQOFF, MID_DTQEND, sc->dtq_chip, 8); en_write(sc, MID_DMA_WRTX, MID_DTQ_A2REG(sc->dtq_chip)); cnt = 1000; while ((reg = en_readx(sc, MID_DMA_RDTX)) != MID_DTQ_A2REG(sc->dtq_chip)) { DELAY(1); if (--cnt == 0) { DBG(sc, DMA, ("unexpected timeout in tx " "DMA test\n alignment=0x%lx, burst size=%d" ", dma addr reg=%#x, rdtx=%#x, stat=%#x\n", (u_long)sp & 63, lcv, en_read(sc, MID_DMA_ADDR), reg, en_read(sc, MID_INTSTAT))); return (retval); } } reg = en_read(sc, MID_INTACK); if ((reg & MID_INT_DMA_TX) != MID_INT_DMA_TX) { DBG(sc, DMA, ("unexpected status in tx DMA test: %#x\n", reg)); return (retval); } /* re-enable DMA (only) */ en_write(sc, MID_MAST_CSR, MID_MCSR_ENDMA); /* "return to sender..." address is known ... */ /* build lcv-byte-DMA x NBURSTS */ if (sc->is_adaptec) en_write(sc, sc->drq_chip, MID_MK_RXQ_ADP(lcv, 0, MID_DMA_END, 0)); else en_write(sc, sc->drq_chip, MID_MK_RXQ_ENI(1, 0, MID_DMA_END, bcode)); en_write(sc, sc->drq_chip + 4, pdp); EN_WRAPADD(MID_DRQOFF, MID_DRQEND, sc->drq_chip, 8); en_write(sc, MID_DMA_WRRX, MID_DRQ_A2REG(sc->drq_chip)); cnt = 1000; while ((reg = en_readx(sc, MID_DMA_RDRX)) != MID_DRQ_A2REG(sc->drq_chip)) { DELAY(1); cnt--; if (--cnt == 0) { DBG(sc, DMA, ("unexpected timeout in rx " "DMA test, rdrx=%#x\n", reg)); return (retval); } } reg = en_read(sc, MID_INTACK); if ((reg & MID_INT_DMA_RX) != MID_INT_DMA_RX) { DBG(sc, DMA, ("unexpected status in rx DMA " "test: 0x%x\n", reg)); return (retval); } if (bcmp(sp, dp, lcv)) { DBG(sc, DMA, ("DMA test failed! lcv=%d, sp=%p, " "dp=%p", lcv, sp, dp)); return (retval); } retval = lcv; } return (retval); /* studly 64 byte DMA present! oh baby!! */ } /* * Find the best DMA parameters * * LOCK: unlocked, not needed */ static void en_dmaprobe(struct en_softc *sc) { bus_dma_tag_t tag; bus_dmamap_t map; int err; void *buffer; int bestalgn, lcv, try, bestnoalgn; bus_addr_t phys; uint8_t *addr; sc->alburst = 0; sc->noalbursts = 0; /* * Allocate some DMA-able memory. * We need 3 times the max burst size aligned to the max burst size. */ err = bus_dma_tag_create(NULL, MIDDMA_MAXBURST, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 3 * MIDDMA_MAXBURST, 1, 3 * MIDDMA_MAXBURST, 0, NULL, NULL, &tag); if (err) panic("%s: cannot create test DMA tag %d", __func__, err); err = bus_dmamem_alloc(tag, &buffer, 0, &map); if (err) panic("%s: cannot allocate test DMA memory %d", __func__, err); err = bus_dmamap_load(tag, map, buffer, 3 * MIDDMA_MAXBURST, en_dmaprobe_load, &phys, BUS_DMA_NOWAIT); if (err) panic("%s: cannot load test DMA map %d", __func__, err); addr = buffer; DBG(sc, DMA, ("phys=%#lx addr=%p", (u_long)phys, addr)); /* * Now get the best burst size of the aligned case. */ bestalgn = bestnoalgn = en_dmaprobe_doit(sc, addr, phys); /* * Now try unaligned. */ for (lcv = 4; lcv < MIDDMA_MAXBURST; lcv += 4) { try = en_dmaprobe_doit(sc, addr + lcv, phys + lcv); if (try < bestnoalgn) bestnoalgn = try; } if (bestnoalgn < bestalgn) { sc->alburst = 1; if (bestnoalgn < 32) sc->noalbursts = 1; } sc->bestburstlen = bestalgn; sc->bestburstshift = en_log2(bestalgn); sc->bestburstmask = sc->bestburstlen - 1; /* must be power of 2 */ sc->bestburstcode = en_sz2b(bestalgn); /* * Reset the chip before freeing the buffer. It may still be trying * to DMA. */ if (sc->en_busreset) sc->en_busreset(sc); en_write(sc, MID_RESID, 0x0); /* reset card before touching RAM */ DELAY(10000); /* may still do DMA */ /* * Free the DMA stuff */ bus_dmamap_unload(tag, map); bus_dmamem_free(tag, buffer, map); bus_dma_tag_destroy(tag); } /*********************************************************************/ /* * Attach/detach. */ /* * Attach to the card. * * LOCK: unlocked, not needed (but initialized) */ int en_attach(struct en_softc *sc) { struct ifnet *ifp = sc->ifp; int sz; uint32_t reg, lcv, check, ptr, sav, midvloc; #ifdef EN_DEBUG sc->debug = EN_DEBUG; #endif /* * Probe card to determine memory size. * * The stupid ENI card always reports to PCI that it needs 4MB of * space (2MB regs and 2MB RAM). If it has less than 2MB RAM the * addresses wrap in the RAM address space (i.e. on a 512KB card * addresses 0x3ffffc, 0x37fffc, and 0x2ffffc are aliases for * 0x27fffc [note that RAM starts at offset 0x200000]). */ /* reset card before touching RAM */ if (sc->en_busreset) sc->en_busreset(sc); en_write(sc, MID_RESID, 0x0); for (lcv = MID_PROBEOFF; lcv <= MID_MAXOFF ; lcv += MID_PROBSIZE) { en_write(sc, lcv, lcv); /* data[address] = address */ for (check = MID_PROBEOFF; check < lcv ;check += MID_PROBSIZE) { reg = en_read(sc, check); if (reg != check) /* found an alias! - quit */ goto done_probe; } } done_probe: lcv -= MID_PROBSIZE; /* take one step back */ sc->en_obmemsz = (lcv + 4) - MID_RAMOFF; /* * determine the largest DMA burst supported */ en_dmaprobe(sc); /* * "hello world" */ /* reset */ if (sc->en_busreset) sc->en_busreset(sc); en_write(sc, MID_RESID, 0x0); /* reset */ /* zero memory */ bus_space_set_region_4(sc->en_memt, sc->en_base, MID_RAMOFF, 0, sc->en_obmemsz / 4); reg = en_read(sc, MID_RESID); if_printf(sc->ifp, "ATM midway v%d, board IDs %d.%d, %s%s%s, " "%ldKB on-board RAM\n", MID_VER(reg), MID_MID(reg), MID_DID(reg), (MID_IS_SABRE(reg)) ? "sabre controller, " : "", (MID_IS_SUNI(reg)) ? "SUNI" : "Utopia", (!MID_IS_SUNI(reg) && MID_IS_UPIPE(reg)) ? " (pipelined)" : "", (long)sc->en_obmemsz / 1024); /* * fill in common ATM interface stuff */ IFP2IFATM(sc->ifp)->mib.hw_version = (MID_VER(reg) << 16) | (MID_MID(reg) << 8) | MID_DID(reg); if (MID_DID(reg) & 0x4) IFP2IFATM(sc->ifp)->mib.media = IFM_ATM_UTP_155; else IFP2IFATM(sc->ifp)->mib.media = IFM_ATM_MM_155; IFP2IFATM(sc->ifp)->mib.pcr = ATM_RATE_155M; IFP2IFATM(sc->ifp)->mib.vpi_bits = 0; IFP2IFATM(sc->ifp)->mib.vci_bits = MID_VCI_BITS; IFP2IFATM(sc->ifp)->mib.max_vccs = MID_N_VC; IFP2IFATM(sc->ifp)->mib.max_vpcs = 0; if (sc->is_adaptec) { IFP2IFATM(sc->ifp)->mib.device = ATM_DEVICE_ADP155P; if (sc->bestburstlen == 64 && sc->alburst == 0) if_printf(sc->ifp, "passed 64 byte DMA test\n"); else if_printf(sc->ifp, "FAILED DMA TEST: " "burst=%d, alburst=%d\n", sc->bestburstlen, sc->alburst); } else { IFP2IFATM(sc->ifp)->mib.device = ATM_DEVICE_ENI155P; if_printf(sc->ifp, "maximum DMA burst length = %d " "bytes%s\n", sc->bestburstlen, sc->alburst ? sc->noalbursts ? " (no large bursts)" : " (must align)" : ""); } /* * link into network subsystem and prepare card */ sc->ifp->if_softc = sc; ifp->if_flags = IFF_SIMPLEX; ifp->if_ioctl = en_ioctl; ifp->if_start = en_start; mtx_init(&sc->en_mtx, device_get_nameunit(sc->dev), MTX_NETWORK_LOCK, MTX_DEF); cv_init(&sc->cv_close, "VC close"); /* * Make the sysctl tree */ sysctl_ctx_init(&sc->sysctl_ctx); if ((sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_hw_atm), OID_AUTO, device_get_nameunit(sc->dev), CTLFLAG_RD, 0, "")) == NULL) goto fail; if (SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO, "istats", CTLFLAG_RD, sc, 0, en_sysctl_istats, "S", "internal statistics") == NULL) goto fail; #ifdef EN_DEBUG if (SYSCTL_ADD_UINT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO, "debug", CTLFLAG_RW , &sc->debug, 0, "") == NULL) goto fail; #endif IFP2IFATM(sc->ifp)->phy = &sc->utopia; utopia_attach(&sc->utopia, IFP2IFATM(sc->ifp), &sc->media, &sc->en_mtx, &sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree), &en_utopia_methods); utopia_init_media(&sc->utopia); MGET(sc->padbuf, M_TRYWAIT, MT_DATA); if (sc->padbuf == NULL) goto fail; bzero(sc->padbuf->m_data, MLEN); if (bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, EN_TXSZ * 1024, EN_MAX_DMASEG, EN_TXSZ * 1024, 0, NULL, NULL, &sc->txtag)) goto fail; sc->map_zone = uma_zcreate("en dma maps", sizeof(struct en_map), en_map_ctor, en_map_dtor, NULL, en_map_fini, UMA_ALIGN_PTR, UMA_ZONE_ZINIT); if (sc->map_zone == NULL) goto fail; uma_zone_set_max(sc->map_zone, EN_MAX_MAPS); /* * init softc */ sc->vccs = malloc(MID_N_VC * sizeof(sc->vccs[0]), M_DEVBUF, M_ZERO | M_WAITOK); sz = sc->en_obmemsz - (MID_BUFOFF - MID_RAMOFF); ptr = sav = MID_BUFOFF; ptr = roundup(ptr, EN_TXSZ * 1024); /* align */ sz = sz - (ptr - sav); if (EN_TXSZ*1024 * EN_NTX > sz) { if_printf(sc->ifp, "EN_NTX/EN_TXSZ too big\n"); goto fail; } for (lcv = 0 ;lcv < EN_NTX ;lcv++) { sc->txslot[lcv].mbsize = 0; sc->txslot[lcv].start = ptr; ptr += (EN_TXSZ * 1024); sz -= (EN_TXSZ * 1024); sc->txslot[lcv].stop = ptr; sc->txslot[lcv].nref = 0; DBG(sc, INIT, ("tx%d: start 0x%x, stop 0x%x", lcv, sc->txslot[lcv].start, sc->txslot[lcv].stop)); } sav = ptr; ptr = roundup(ptr, EN_RXSZ * 1024); /* align */ sz = sz - (ptr - sav); sc->en_nrx = sz / (EN_RXSZ * 1024); if (sc->en_nrx <= 0) { if_printf(sc->ifp, "EN_NTX/EN_TXSZ/EN_RXSZ too big\n"); goto fail; } /* * ensure that there is always one VC slot on the service list free * so that we can tell the difference between a full and empty list. */ if (sc->en_nrx >= MID_N_VC) sc->en_nrx = MID_N_VC - 1; for (lcv = 0 ; lcv < sc->en_nrx ; lcv++) { sc->rxslot[lcv].vcc = NULL; midvloc = sc->rxslot[lcv].start = ptr; ptr += (EN_RXSZ * 1024); sz -= (EN_RXSZ * 1024); sc->rxslot[lcv].stop = ptr; midvloc = midvloc - MID_RAMOFF; /* mask, cvt to words */ midvloc = (midvloc & ~((EN_RXSZ*1024) - 1)) >> 2; /* we only want the top 11 bits */ midvloc = midvloc >> MIDV_LOCTOPSHFT; midvloc = (midvloc & MIDV_LOCMASK) << MIDV_LOCSHIFT; sc->rxslot[lcv].mode = midvloc | (en_k2sz(EN_RXSZ) << MIDV_SZSHIFT) | MIDV_TRASH; DBG(sc, INIT, ("rx%d: start 0x%x, stop 0x%x, mode 0x%x", lcv, sc->rxslot[lcv].start, sc->rxslot[lcv].stop, sc->rxslot[lcv].mode)); } if_printf(sc->ifp, "%d %dKB receive buffers, %d %dKB transmit " "buffers\n", sc->en_nrx, EN_RXSZ, EN_NTX, EN_TXSZ); if_printf(sc->ifp, "end station identifier (mac address) " "%6D\n", IFP2IFATM(sc->ifp)->mib.esi, ":"); /* * Start SUNI stuff. This will call our readregs/writeregs * functions and these assume the lock to be held so we must get it * here. */ EN_LOCK(sc); utopia_start(&sc->utopia); utopia_reset(&sc->utopia); EN_UNLOCK(sc); /* * final commit */ atm_ifattach(ifp); #ifdef ENABLE_BPF bpfattach(ifp, DLT_ATM_RFC1483, sizeof(struct atmllc)); #endif return (0); fail: en_destroy(sc); return (-1); } /* * Free all internal resources. No access to bus resources here. * No locking required here (interrupt is already disabled). * * LOCK: unlocked, needed (but destroyed) */ void en_destroy(struct en_softc *sc) { u_int i; if (sc->utopia.state & UTP_ST_ATTACHED) { /* these assume the lock to be held */ EN_LOCK(sc); utopia_stop(&sc->utopia); utopia_detach(&sc->utopia); EN_UNLOCK(sc); } if (sc->vccs != NULL) { /* get rid of sticky VCCs */ for (i = 0; i < MID_N_VC; i++) if (sc->vccs[i] != NULL) uma_zfree(en_vcc_zone, sc->vccs[i]); free(sc->vccs, M_DEVBUF); } if (sc->padbuf != NULL) m_free(sc->padbuf); /* * Destroy the map zone before the tag (the fini function will * destroy the DMA maps using the tag) */ if (sc->map_zone != NULL) uma_zdestroy(sc->map_zone); if (sc->txtag != NULL) bus_dma_tag_destroy(sc->txtag); (void)sysctl_ctx_free(&sc->sysctl_ctx); cv_destroy(&sc->cv_close); mtx_destroy(&sc->en_mtx); } /* * Module loaded/unloaded */ int en_modevent(module_t mod __unused, int event, void *arg __unused) { switch (event) { case MOD_LOAD: en_vcc_zone = uma_zcreate("EN vccs", sizeof(struct en_vcc), NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0); if (en_vcc_zone == NULL) return (ENOMEM); break; case MOD_UNLOAD: uma_zdestroy(en_vcc_zone); break; } return (0); } /*********************************************************************/ /* * Debugging support */ #ifdef EN_DDBHOOK /* * functions we can call from ddb */ /* * en_dump: dump the state */ #define END_SWSL 0x00000040 /* swsl state */ #define END_DRQ 0x00000020 /* drq state */ #define END_DTQ 0x00000010 /* dtq state */ #define END_RX 0x00000008 /* rx state */ #define END_TX 0x00000004 /* tx state */ #define END_MREGS 0x00000002 /* registers */ #define END_STATS 0x00000001 /* dump stats */ #define END_BITS "\20\7SWSL\6DRQ\5DTQ\4RX\3TX\2MREGS\1STATS" static void en_dump_stats(const struct en_stats *s) { printf("en_stats:\n"); printf("\t%d/%d mfix (%d failed)\n", s->mfixaddr, s->mfixlen, s->mfixfail); printf("\t%d rx dma overflow interrupts\n", s->dmaovr); printf("\t%d times out of TX space and stalled\n", s->txoutspace); printf("\t%d times out of DTQs\n", s->txdtqout); printf("\t%d times launched a packet\n", s->launch); printf("\t%d times pulled the hw service list\n", s->hwpull); printf("\t%d times pushed a vci on the sw service list\n", s->swadd); printf("\t%d times RX pulled an mbuf from Q that wasn't ours\n", s->rxqnotus); printf("\t%d times RX pulled a good mbuf from Q\n", s->rxqus); printf("\t%d times ran out of DRQs\n", s->rxdrqout); printf("\t%d transmit packets dropped due to mbsize\n", s->txmbovr); printf("\t%d cells trashed due to turned off rxvc\n", s->vtrash); printf("\t%d cells trashed due to totally full buffer\n", s->otrash); printf("\t%d cells trashed due almost full buffer\n", s->ttrash); printf("\t%d rx mbuf allocation failures\n", s->rxmbufout); printf("\t%d times out of tx maps\n", s->txnomap); #ifdef NATM #ifdef NATM_STAT printf("\tnatmintr so_rcv: ok/drop cnt: %d/%d, ok/drop bytes: %d/%d\n", natm_sookcnt, natm_sodropcnt, natm_sookbytes, natm_sodropbytes); #endif #endif } static void en_dump_mregs(struct en_softc *sc) { u_int cnt; printf("mregs:\n"); printf("resid = 0x%x\n", en_read(sc, MID_RESID)); printf("interrupt status = 0x%b\n", (int)en_read(sc, MID_INTSTAT), MID_INTBITS); printf("interrupt enable = 0x%b\n", (int)en_read(sc, MID_INTENA), MID_INTBITS); printf("mcsr = 0x%b\n", (int)en_read(sc, MID_MAST_CSR), MID_MCSRBITS); printf("serv_write = [chip=%u] [us=%u]\n", en_read(sc, MID_SERV_WRITE), MID_SL_A2REG(sc->hwslistp)); printf("dma addr = 0x%x\n", en_read(sc, MID_DMA_ADDR)); printf("DRQ: chip[rd=0x%x,wr=0x%x], sc[chip=0x%x,us=0x%x]\n", MID_DRQ_REG2A(en_read(sc, MID_DMA_RDRX)), MID_DRQ_REG2A(en_read(sc, MID_DMA_WRRX)), sc->drq_chip, sc->drq_us); printf("DTQ: chip[rd=0x%x,wr=0x%x], sc[chip=0x%x,us=0x%x]\n", MID_DTQ_REG2A(en_read(sc, MID_DMA_RDTX)), MID_DTQ_REG2A(en_read(sc, MID_DMA_WRTX)), sc->dtq_chip, sc->dtq_us); printf(" unusal txspeeds:"); for (cnt = 0 ; cnt < MID_N_VC ; cnt++) if (sc->vccs[cnt]->txspeed) printf(" vci%d=0x%x", cnt, sc->vccs[cnt]->txspeed); printf("\n"); printf(" rxvc slot mappings:"); for (cnt = 0 ; cnt < MID_N_VC ; cnt++) if (sc->vccs[cnt]->rxslot != NULL) printf(" %d->%zu", cnt, sc->vccs[cnt]->rxslot - sc->rxslot); printf("\n"); } static void en_dump_tx(struct en_softc *sc) { u_int slot; printf("tx:\n"); for (slot = 0 ; slot < EN_NTX; slot++) { printf("tx%d: start/stop/cur=0x%x/0x%x/0x%x [%d] ", slot, sc->txslot[slot].start, sc->txslot[slot].stop, sc->txslot[slot].cur, (sc->txslot[slot].cur - sc->txslot[slot].start) / 4); printf("mbsize=%d, bfree=%d\n", sc->txslot[slot].mbsize, sc->txslot[slot].bfree); printf("txhw: base_address=0x%x, size=%u, read=%u, " "descstart=%u\n", (u_int)MIDX_BASE(en_read(sc, MIDX_PLACE(slot))), MIDX_SZ(en_read(sc, MIDX_PLACE(slot))), en_read(sc, MIDX_READPTR(slot)), en_read(sc, MIDX_DESCSTART(slot))); } } static void en_dump_rx(struct en_softc *sc) { struct en_rxslot *slot; printf(" recv slots:\n"); for (slot = sc->rxslot ; slot < &sc->rxslot[sc->en_nrx]; slot++) { printf("rx%zu: start/stop/cur=0x%x/0x%x/0x%x mode=0x%x ", slot - sc->rxslot, slot->start, slot->stop, slot->cur, slot->mode); if (slot->vcc != NULL) { printf("vci=%u\n", slot->vcc->vcc.vci); printf("RXHW: mode=0x%x, DST_RP=0x%x, WP_ST_CNT=0x%x\n", en_read(sc, MID_VC(slot->vcc->vcc.vci)), en_read(sc, MID_DST_RP(slot->vcc->vcc.vci)), en_read(sc, MID_WP_ST_CNT(slot->vcc->vcc.vci))); } } } /* * This is only correct for non-adaptec adapters */ static void en_dump_dtqs(struct en_softc *sc) { uint32_t ptr, reg; printf(" dtq [need_dtqs=%d,dtq_free=%d]:\n", sc->need_dtqs, sc->dtq_free); ptr = sc->dtq_chip; while (ptr != sc->dtq_us) { reg = en_read(sc, ptr); printf("\t0x%x=[%#x cnt=%d, chan=%d, end=%d, type=%d @ 0x%x]\n", sc->dtq[MID_DTQ_A2REG(ptr)], reg, MID_DMA_CNT(reg), MID_DMA_TXCHAN(reg), (reg & MID_DMA_END) != 0, MID_DMA_TYPE(reg), en_read(sc, ptr + 4)); EN_WRAPADD(MID_DTQOFF, MID_DTQEND, ptr, 8); } } static void en_dump_drqs(struct en_softc *sc) { uint32_t ptr, reg; printf(" drq [need_drqs=%d,drq_free=%d]:\n", sc->need_drqs, sc->drq_free); ptr = sc->drq_chip; while (ptr != sc->drq_us) { reg = en_read(sc, ptr); printf("\t0x%x=[cnt=%d, chan=%d, end=%d, type=%d @ 0x%x]\n", sc->drq[MID_DRQ_A2REG(ptr)], MID_DMA_CNT(reg), MID_DMA_RXVCI(reg), (reg & MID_DMA_END) != 0, MID_DMA_TYPE(reg), en_read(sc, ptr + 4)); EN_WRAPADD(MID_DRQOFF, MID_DRQEND, ptr, 8); } } /* Do not staticize - meant for calling from DDB! */ int en_dump(int unit, int level) { struct en_softc *sc; int lcv, cnt; devclass_t dc; int maxunit; dc = devclass_find("en"); if (dc == NULL) { printf("%s: can't find devclass!\n", __func__); return (0); } maxunit = devclass_get_maxunit(dc); for (lcv = 0 ; lcv < maxunit ; lcv++) { sc = devclass_get_softc(dc, lcv); if (sc == NULL) continue; if (unit != -1 && unit != lcv) continue; if_printf(sc->ifp, "dumping device at level 0x%b\n", level, END_BITS); if (sc->dtq_us == 0) { printf("\n"); continue; } if (level & END_STATS) en_dump_stats(&sc->stats); if (level & END_MREGS) en_dump_mregs(sc); if (level & END_TX) en_dump_tx(sc); if (level & END_RX) en_dump_rx(sc); if (level & END_DTQ) en_dump_dtqs(sc); if (level & END_DRQ) en_dump_drqs(sc); if (level & END_SWSL) { printf(" swslist [size=%d]: ", sc->swsl_size); for (cnt = sc->swsl_head ; cnt != sc->swsl_tail ; cnt = (cnt + 1) % MID_SL_N) printf("0x%x ", sc->swslist[cnt]); printf("\n"); } } return (0); } /* * en_dumpmem: dump the memory * * Do not staticize - meant for calling from DDB! */ int en_dumpmem(int unit, int addr, int len) { struct en_softc *sc; uint32_t reg; devclass_t dc; dc = devclass_find("en"); if (dc == NULL) { printf("%s: can't find devclass\n", __func__); return (0); } sc = devclass_get_softc(dc, unit); if (sc == NULL) { printf("%s: invalid unit number: %d\n", __func__, unit); return (0); } addr = addr & ~3; if (addr < MID_RAMOFF || addr + len * 4 > MID_MAXOFF || len <= 0) { printf("invalid addr/len number: %d, %d\n", addr, len); return (0); } printf("dumping %d words starting at offset 0x%x\n", len, addr); while (len--) { reg = en_read(sc, addr); printf("mem[0x%x] = 0x%x\n", addr, reg); addr += 4; } return (0); } #endif