/* * Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: if_ex.c,v 1.16 1999/07/06 19:22:47 des Exp $ */ /* * Intel EtherExpress Pro/10, Pro/10+ Ethernet driver * * Revision history: * * 30-Oct-1996: first beta version. Inet and BPF supported, but no multicast. */ #include "ex.h" #if NEX > 0 #include "bpf.h" #include "opt_inet.h" #include "opt_ipx.h" #include #include #include #include #include #include #include #if NBPF > 0 #include #endif #include #include #include #ifdef EXDEBUG #define Start_End 1 #define Rcvd_Pkts 2 #define Sent_Pkts 4 #define Status 8 static int debug_mask = 0; static int exintr_count = 0; #define DODEBUG(level, action) if (level & debug_mask) action #else #define DODEBUG(level, action) #endif #define Conn_BNC 1 #define Conn_TPE 2 #define Conn_AUI 3 struct ex_softc { struct arpcom arpcom; /* Ethernet common data */ u_int iobase; /* I/O base address. */ u_short connector; /* Connector type. */ u_short irq_no; /* IRQ number. */ char *irq2ee; /* irq <-> internal representation conversion */ u_char *ee2irq; u_int mem_size; /* Total memory size, in bytes. */ u_int rx_mem_size; /* Rx memory size (by default, first 3/4 of total memory). */ u_int rx_lower_limit, rx_upper_limit; /* Lower and upper limits of receive buffer. */ u_int rx_head; /* Head of receive ring buffer. */ u_int tx_mem_size; /* Tx memory size (by default, last quarter of total memory). */ u_int tx_lower_limit, tx_upper_limit; /* Lower and upper limits of transmit buffer. */ u_int tx_head, tx_tail; /* Head and tail of transmit ring buffer. */ u_int tx_last; /* Pointer to beginning of last frame in the chain. */ }; static struct ex_softc ex_sc[NEX]; /* XXX would it be better to malloc(3) the memory? */ static char irq2eemap[] = { -1, -1, 0, 1, -1, 2, -1, -1, -1, 0, 3, 4, -1, -1, -1, -1 }; static u_char ee2irqmap[] = { 9, 3, 5, 10, 11, 0, 0, 0 }; static char plus_irq2eemap[] = { -1, -1, -1, 0, 1, 2, -1, 3, -1, 4, 5, 6, 7, -1, -1, -1 }; static u_char plus_ee2irqmap[] = { 3, 4, 5, 7, 9, 10, 11, 12 }; static int ex_probe __P((struct isa_device *)); static int ex_attach __P((struct isa_device *)); static void ex_init __P((void *)); static void ex_start __P((struct ifnet *)); static void ex_stop __P((int)); static ointhand2_t exintr; static int ex_ioctl __P((struct ifnet *, u_long, caddr_t)); static void ex_reset __P((int)); static void ex_watchdog __P((struct ifnet *)); static u_short eeprom_read __P((int, int)); static int look_for_card __P((u_int)); static void ex_tx_intr __P((int)); static void ex_rx_intr __P((int)); struct isa_driver exdriver = { ex_probe, ex_attach, "ex", 0 }; static int look_for_card(u_int iobase) { int count1, count2; /* * Check for the i82595 signature, and check that the round robin * counter actually advances. */ if (((count1 = inb(iobase + ID_REG)) & Id_Mask) != Id_Sig) return(0); count2 = inb(iobase + ID_REG); count2 = inb(iobase + ID_REG); count2 = inb(iobase + ID_REG); return((count2 & Counter_bits) == ((count1 + 0xc0) & Counter_bits)); } int ex_probe(struct isa_device *dev) { int unit = dev->id_unit; struct ex_softc *sc = &ex_sc[unit]; u_int iobase; u_short eaddr_tmp; int tmp; DODEBUG(Start_End, printf("ex_probe%d: start\n", unit);); /* * If an I/O address was supplied in the configuration file, probe only * that. Otherwise, cycle through the predefined set of possible addresses. */ if (dev->id_iobase != -1) { if (! look_for_card(iobase = dev->id_iobase)) return(0); } else { for (iobase = 0x200; iobase < 0x3a0; iobase += 0x10) if (look_for_card(iobase)) break; if (iobase >= 0x3a0) return(0); else dev->id_iobase = iobase; } /* * Reset the card. */ outb(iobase + CMD_REG, Reset_CMD); DELAY(400); /* * Fill in several fields of the softc structure: * - I/O base address. * - Hardware Ethernet address. * - IRQ number (if not supplied in config file, read it from EEPROM). * - Connector type. */ sc->iobase = iobase; eaddr_tmp = eeprom_read(iobase, EE_Eth_Addr_Lo); sc->arpcom.ac_enaddr[5] = eaddr_tmp & 0xff; sc->arpcom.ac_enaddr[4] = eaddr_tmp >> 8; eaddr_tmp = eeprom_read(iobase, EE_Eth_Addr_Mid); sc->arpcom.ac_enaddr[3] = eaddr_tmp & 0xff; sc->arpcom.ac_enaddr[2] = eaddr_tmp >> 8; eaddr_tmp = eeprom_read(iobase, EE_Eth_Addr_Hi); sc->arpcom.ac_enaddr[1] = eaddr_tmp & 0xff; sc->arpcom.ac_enaddr[0] = eaddr_tmp >> 8; tmp = eeprom_read(iobase, EE_IRQ_No) & IRQ_No_Mask; /* work out which set of irq <-> internal tables to use */ if (sc->arpcom.ac_enaddr[0] == 0x00 && sc->arpcom.ac_enaddr[1] == 0xA0 && sc->arpcom.ac_enaddr[2] == 0xC9) { /* it's a 10+ */ sc->irq2ee = plus_irq2eemap; sc->ee2irq = plus_ee2irqmap; } else { /* it's an ordinary 10 */ sc->irq2ee = irq2eemap; sc->ee2irq = ee2irqmap; } if (dev->id_irq > 0) { if (sc->ee2irq[tmp] != ffs(dev->id_irq) - 1) printf("ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d\n", unit, sc->ee2irq[tmp], ffs(dev->id_irq) - 1); sc->irq_no = ffs(dev->id_irq) - 1; } else { sc->irq_no = sc->ee2irq[tmp]; dev->id_irq = 1 << sc->irq_no; } if (sc->irq_no == 0) { printf("ex%d: invalid IRQ.\n", unit); return(0); } outb(iobase + CMD_REG, Bank2_Sel); tmp = inb(iobase + REG3); if (tmp & TPE_bit) sc->connector = Conn_TPE; else if (tmp & BNC_bit) sc->connector = Conn_BNC; else sc->connector = Conn_AUI; sc->mem_size = CARD_RAM_SIZE; /* XXX This should be read from the card itself. */ outb(iobase + CMD_REG, Bank0_Sel); DODEBUG(Start_End, printf("ex_probe%d: finish\n", unit);); return(EX_IOSIZE); } int ex_attach(struct isa_device *dev) { int unit = dev->id_unit; struct ex_softc *sc = &ex_sc[unit]; struct ifnet *ifp = &sc->arpcom.ac_if; DODEBUG(Start_End, printf("ex_attach%d: start\n", unit);); dev->id_ointr = exintr; /* * Initialize the ifnet structure. */ ifp->if_softc = sc; ifp->if_unit = unit; ifp->if_name = "ex"; ifp->if_init = ex_init; ifp->if_output = ether_output; ifp->if_start = ex_start; ifp->if_ioctl = ex_ioctl; ifp->if_watchdog = ex_watchdog; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST /* XXX not done yet. | IFF_MULTICAST */; /* * Attach the interface. */ if_attach(ifp); ether_ifattach(ifp); if (sc->arpcom.ac_enaddr[0] == 0x00 && sc->arpcom.ac_enaddr[1] == 0xA0 && sc->arpcom.ac_enaddr[2] == 0xC9) { printf("ex%d: Intel EtherExpress Pro/10+, address %6D, connector ", dev->id_unit, sc->arpcom.ac_enaddr, ":"); } else { printf("ex%d: Intel EtherExpress Pro/10, address %6D, connector ", dev->id_unit, sc->arpcom.ac_enaddr, ":"); } switch(sc->connector) { case Conn_TPE: printf("TPE\n"); break; case Conn_BNC: printf("BNC\n"); break; case Conn_AUI: printf("AUI\n"); break; default: printf("???\n"); } /* * If BPF is in the kernel, call the attach for it */ #if NBPF > 0 bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif DODEBUG(Start_End, printf("ex_attach%d: finish\n", unit);); sc->arpcom.ac_if.if_snd.ifq_maxlen = ifqmaxlen; return(1); } void ex_init(void *xsc) { register struct ex_softc *sc = (struct ex_softc *) xsc; struct ifnet *ifp = &sc->arpcom.ac_if; int s, i; register int iobase = sc->iobase; unsigned short temp_reg; DODEBUG(Start_End, printf("ex_init%d: start\n", ifp->if_unit);); if (ifp->if_addrhead.tqh_first == NULL) return; s = splimp(); sc->arpcom.ac_if.if_timer = 0; /* * Load the ethernet address into the card. */ outb(iobase + CMD_REG, Bank2_Sel); temp_reg = inb(iobase + EEPROM_REG); if (temp_reg & Trnoff_Enable) outb(iobase + EEPROM_REG, temp_reg & ~Trnoff_Enable); for (i = 0; i < ETHER_ADDR_LEN; i++) outb(iobase + I_ADDR_REG0 + i, sc->arpcom.ac_enaddr[i]); /* * - Setup transmit chaining and discard bad received frames. * - Match broadcast. * - Clear test mode. * - Set receiving mode. * - Set IRQ number. */ outb(iobase + REG1, inb(iobase + REG1) | Tx_Chn_Int_Md | Tx_Chn_ErStp | Disc_Bad_Fr); outb(iobase + REG2, inb(iobase + REG2) | No_SA_Ins | RX_CRC_InMem); outb(iobase + REG3, inb(iobase + REG3) & 0x3f /* XXX constants. */ ); outb(iobase + CMD_REG, Bank1_Sel); outb(iobase + INT_NO_REG, (inb(iobase + INT_NO_REG) & 0xf8) | sc->irq2ee[sc->irq_no]); /* * Divide the available memory in the card into rcv and xmt buffers. * By default, I use the first 3/4 of the memory for the rcv buffer, * and the remaining 1/4 of the memory for the xmt buffer. */ sc->rx_mem_size = sc->mem_size * 3 / 4; sc->tx_mem_size = sc->mem_size - sc->rx_mem_size; sc->rx_lower_limit = 0x0000; sc->rx_upper_limit = sc->rx_mem_size - 2; sc->tx_lower_limit = sc->rx_mem_size; sc->tx_upper_limit = sc->mem_size - 2; outb(iobase + RCV_LOWER_LIMIT_REG, sc->rx_lower_limit >> 8); outb(iobase + RCV_UPPER_LIMIT_REG, sc->rx_upper_limit >> 8); outb(iobase + XMT_LOWER_LIMIT_REG, sc->tx_lower_limit >> 8); outb(iobase + XMT_UPPER_LIMIT_REG, sc->tx_upper_limit >> 8); /* * Enable receive and transmit interrupts, and clear any pending int. */ outb(iobase + REG1, inb(iobase + REG1) | TriST_INT); outb(iobase + CMD_REG, Bank0_Sel); outb(iobase + MASK_REG, All_Int & ~(Rx_Int | Tx_Int)); outb(iobase + STATUS_REG, All_Int); /* * Initialize receive and transmit ring buffers. */ outw(iobase + RCV_BAR, sc->rx_lower_limit); sc->rx_head = sc->rx_lower_limit; outw(iobase + RCV_STOP_REG, sc->rx_upper_limit | 0xfe); outw(iobase + XMT_BAR, sc->tx_lower_limit); sc->tx_head = sc->tx_tail = sc->tx_lower_limit; ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE init\n");); /* * Final reset of the board, and enable operation. */ outb(iobase + CMD_REG, Sel_Reset_CMD); DELAY(2); outb(iobase + CMD_REG, Rcv_Enable_CMD); ex_start(ifp); splx(s); DODEBUG(Start_End, printf("ex_init%d: finish\n", ifp->if_unit);); } void ex_start(struct ifnet *ifp) { int unit = ifp->if_unit; register struct ex_softc *sc = &ex_sc[unit]; register int iobase = sc->iobase; int i, s, len, data_len, avail, dest, next; unsigned char tmp16[2]; struct mbuf *opkt; register struct mbuf *m; DODEBUG(Start_End, printf("ex_start%d: start\n", unit);); s = splimp(); /* * Main loop: send outgoing packets to network card until there are no * more packets left, or the card cannot accept any more yet. */ while (((opkt = ifp->if_snd.ifq_head) != NULL) && ! (ifp->if_flags & IFF_OACTIVE)) { /* * Ensure there is enough free transmit buffer space for this packet, * including its header. Note: the header cannot wrap around the end of * the transmit buffer and must be kept together, so we allow space for * twice the length of the header, just in case. */ for (len = 0, m = opkt; m != NULL; m = m->m_next) len += m->m_len; data_len = len; DODEBUG(Sent_Pkts, printf("1. Sending packet with %d data bytes. ", data_len);); if (len & 1) len += XMT_HEADER_LEN + 1; else len += XMT_HEADER_LEN; if ((i = sc->tx_tail - sc->tx_head) >= 0) avail = sc->tx_mem_size - i; else avail = -i; DODEBUG(Sent_Pkts, printf("i=%d, avail=%d\n", i, avail);); if (avail >= len + XMT_HEADER_LEN) { IF_DEQUEUE(&ifp->if_snd, opkt); #ifdef EX_PSA_INTR /* * Disable rx and tx interrupts, to avoid corruption of the host * address register by interrupt service routines. XXX Is this necessary with splimp() enabled? */ outb(iobase + MASK_REG, All_Int); #endif /* * Compute the start and end addresses of this frame in the tx buffer. */ dest = sc->tx_tail; next = dest + len; if (next > sc->tx_upper_limit) { if ((sc->tx_upper_limit + 2 - sc->tx_tail) <= XMT_HEADER_LEN) { dest = sc->tx_lower_limit; next = dest + len; } else next = sc->tx_lower_limit + next - sc->tx_upper_limit - 2; } /* * Build the packet frame in the card's ring buffer. */ DODEBUG(Sent_Pkts, printf("2. dest=%d, next=%d. ", dest, next);); outw(iobase + HOST_ADDR_REG, dest); outw(iobase + IO_PORT_REG, Transmit_CMD); outw(iobase + IO_PORT_REG, 0); outw(iobase + IO_PORT_REG, next); outw(iobase + IO_PORT_REG, data_len); /* * Output the packet data to the card. Ensure all transfers are * 16-bit wide, even if individual mbufs have odd length. */ for (m = opkt, i = 0; m != NULL; m = m->m_next) { DODEBUG(Sent_Pkts, printf("[%d]", m->m_len);); if (i) { tmp16[1] = *(mtod(m, caddr_t)); outsw(iobase + IO_PORT_REG, tmp16, 1); } outsw(iobase + IO_PORT_REG, mtod(m, caddr_t) + i, (m->m_len - i) / 2); if ((i = (m->m_len - i) & 1) != 0) tmp16[0] = *(mtod(m, caddr_t) + m->m_len - 1); } if (i) outsw(iobase + IO_PORT_REG, tmp16, 1); /* * If there were other frames chained, update the chain in the last one. */ if (sc->tx_head != sc->tx_tail) { if (sc->tx_tail != dest) { outw(iobase + HOST_ADDR_REG, sc->tx_last + XMT_Chain_Point); outw(iobase + IO_PORT_REG, dest); } outw(iobase + HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count); i = inw(iobase + IO_PORT_REG); outw(iobase + HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count); outw(iobase + IO_PORT_REG, i | Ch_bit); } /* * Resume normal operation of the card: * - Make a dummy read to flush the DRAM write pipeline. * - Enable receive and transmit interrupts. * - Send Transmit or Resume_XMT command, as appropriate. */ inw(iobase + IO_PORT_REG); #ifdef EX_PSA_INTR outb(iobase + MASK_REG, All_Int & ~(Rx_Int | Tx_Int)); #endif if (sc->tx_head == sc->tx_tail) { outw(iobase + XMT_BAR, dest); outb(iobase + CMD_REG, Transmit_CMD); sc->tx_head = dest; DODEBUG(Sent_Pkts, printf("Transmit\n");); } else { outb(iobase + CMD_REG, Resume_XMT_List_CMD); DODEBUG(Sent_Pkts, printf("Resume\n");); } sc->tx_last = dest; sc->tx_tail = next; #if NBPF > 0 if (ifp->if_bpf != NULL) bpf_mtap(ifp, opkt); #endif ifp->if_timer = 2; ifp->if_opackets++; m_freem(opkt); } else { ifp->if_flags |= IFF_OACTIVE; DODEBUG(Status, printf("OACTIVE start\n");); } } splx(s); DODEBUG(Start_End, printf("ex_start%d: finish\n", unit);); } void ex_stop(int unit) { struct ex_softc *sc = &ex_sc[unit]; int iobase = sc->iobase; DODEBUG(Start_End, printf("ex_stop%d: start\n", unit);); /* * Disable card operation: * - Disable the interrupt line. * - Flush transmission and disable reception. * - Mask and clear all interrupts. * - Reset the 82595. */ outb(iobase + CMD_REG, Bank1_Sel); outb(iobase + REG1, inb(iobase + REG1) & ~TriST_INT); outb(iobase + CMD_REG, Bank0_Sel); outb(iobase + CMD_REG, Rcv_Stop); sc->tx_head = sc->tx_tail = sc->tx_lower_limit; sc->tx_last = 0; /* XXX I think these two lines are not necessary, because ex_init will always be called again to reinit the interface. */ outb(iobase + MASK_REG, All_Int); outb(iobase + STATUS_REG, All_Int); outb(iobase + CMD_REG, Reset_CMD); DELAY(200); DODEBUG(Start_End, printf("ex_stop%d: finish\n", unit);); } static void exintr(int unit) { struct ex_softc *sc = &ex_sc[unit]; struct ifnet *ifp = &sc->arpcom.ac_if; int iobase = sc->iobase; int int_status, send_pkts; DODEBUG(Start_End, printf("exintr%d: start\n", unit);); #ifdef EXDEBUG if (++exintr_count != 1) printf("WARNING: nested interrupt (%d). Mail the author.\n", exintr_count); #endif send_pkts = 0; while ((int_status = inb(iobase + STATUS_REG)) & (Tx_Int | Rx_Int)) { if (int_status & Rx_Int) { outb(iobase + STATUS_REG, Rx_Int); ex_rx_intr(unit); } else if (int_status & Tx_Int) { outb(iobase + STATUS_REG, Tx_Int); ex_tx_intr(unit); send_pkts = 1; } } /* * If any packet has been transmitted, and there are queued packets to * be sent, attempt to send more packets to the network card. */ if (send_pkts && (ifp->if_snd.ifq_head != NULL)) ex_start(ifp); #ifdef EXDEBUG exintr_count--; #endif DODEBUG(Start_End, printf("exintr%d: finish\n", unit);); } void ex_tx_intr(int unit) { register struct ex_softc *sc = &ex_sc[unit]; register struct ifnet *ifp = &sc->arpcom.ac_if; register int iobase = sc->iobase; int tx_status; DODEBUG(Start_End, printf("ex_tx_intr%d: start\n", unit);); /* * - Cancel the watchdog. * For all packets transmitted since last transmit interrupt: * - Advance chain pointer to next queued packet. * - Update statistics. */ ifp->if_timer = 0; while (sc->tx_head != sc->tx_tail) { outw(iobase + HOST_ADDR_REG, sc->tx_head); if (! inw(iobase + IO_PORT_REG) & Done_bit) break; tx_status = inw(iobase + IO_PORT_REG); sc->tx_head = inw(iobase + IO_PORT_REG); if (tx_status & TX_OK_bit) ifp->if_opackets++; else ifp->if_oerrors++; ifp->if_collisions += tx_status & No_Collisions_bits; } /* * The card should be ready to accept more packets now. */ ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE tx_intr\n");); DODEBUG(Start_End, printf("ex_tx_intr%d: finish\n", unit);); } void ex_rx_intr(int unit) { register struct ex_softc *sc = &ex_sc[unit]; register struct ifnet *ifp = &sc->arpcom.ac_if; register int iobase = sc->iobase; int rx_status, pkt_len, QQQ; register struct mbuf *m, *ipkt; struct ether_header *eh; DODEBUG(Start_End, printf("ex_rx_intr%d: start\n", unit);); /* * For all packets received since last receive interrupt: * - If packet ok, read it into a new mbuf and queue it to interface, * updating statistics. * - If packet bad, just discard it, and update statistics. * Finally, advance receive stop limit in card's memory to new location. */ outw(iobase + HOST_ADDR_REG, sc->rx_head); while (inw(iobase + IO_PORT_REG) == RCV_Done) { rx_status = inw(iobase + IO_PORT_REG); sc->rx_head = inw(iobase + IO_PORT_REG); QQQ = pkt_len = inw(iobase + IO_PORT_REG); if (rx_status & RCV_OK_bit) { MGETHDR(m, M_DONTWAIT, MT_DATA); ipkt = m; if (ipkt == NULL) ifp->if_iqdrops++; else { ipkt->m_pkthdr.rcvif = ifp; ipkt->m_pkthdr.len = pkt_len; ipkt->m_len = MHLEN; while (pkt_len > 0) { if (pkt_len > MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) m->m_len = MCLBYTES; else { m_freem(ipkt); ifp->if_iqdrops++; goto rx_another; } } m->m_len = min(m->m_len, pkt_len); /* * NOTE: I'm assuming that all mbufs allocated are of even length, * except for the last one in an odd-length packet. */ insw(iobase + IO_PORT_REG, mtod(m, caddr_t), m->m_len / 2); if (m->m_len & 1) *(mtod(m, caddr_t) + m->m_len - 1) = inb(iobase + IO_PORT_REG); pkt_len -= m->m_len; if (pkt_len > 0) { MGET(m->m_next, M_DONTWAIT, MT_DATA); if (m->m_next == NULL) { m_freem(ipkt); ifp->if_iqdrops++; goto rx_another; } m = m->m_next; m->m_len = MLEN; } } eh = mtod(ipkt, struct ether_header *); #ifdef EXDEBUG if (debug_mask & Rcvd_Pkts) { if ((eh->ether_dhost[5] != 0xff) || (eh->ether_dhost[0] != 0xff)) { printf("Receive packet with %d data bytes: %6D -> ", QQQ, eh->ether_shost, ":"); printf("%6D\n", eh->ether_dhost, ":"); } /* QQQ */ } #endif #if NBPF > 0 if (ifp->if_bpf != NULL) { bpf_mtap(ifp, ipkt); /* * Note that the interface cannot be in promiscuous mode if there are * no BPF listeners. And if we are in promiscuous mode, we have to * check if this packet is really ours. */ if ((ifp->if_flags & IFF_PROMISC) && (eh->ether_dhost[0] & 1) == 0 && bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr, sizeof(eh->ether_dhost)) != 0 && bcmp(eh->ether_dhost, etherbroadcastaddr, sizeof(eh->ether_dhost)) != 0) { m_freem(ipkt); goto rx_another; } } #endif m_adj(ipkt, sizeof(struct ether_header)); ether_input(ifp, eh, ipkt); ifp->if_ipackets++; } } else ifp->if_ierrors++; outw(iobase + HOST_ADDR_REG, sc->rx_head); rx_another: ; } if (sc->rx_head < sc->rx_lower_limit + 2) outw(iobase + RCV_STOP_REG, sc->rx_upper_limit); else outw(iobase + RCV_STOP_REG, sc->rx_head - 2); DODEBUG(Start_End, printf("ex_rx_intr%d: finish\n", unit);); } int ex_ioctl(register struct ifnet *ifp, u_long cmd, caddr_t data) { struct ex_softc *sc = &ex_sc[ifp->if_unit]; struct ifreq *ifr = (struct ifreq *) data; int s, error = 0; DODEBUG(Start_End, printf("ex_ioctl%d: start ", ifp->if_unit);); s = splimp(); switch(cmd) { case SIOCSIFADDR: case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, command, data); break; case SIOCSIFFLAGS: DODEBUG(Start_End, printf("SIOCSIFFLAGS");); if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) { ifp->if_flags &= ~IFF_RUNNING; ex_stop(ifp->if_unit); } else ex_init(sc); break; #ifdef NODEF case SIOCGHWADDR: DODEBUG(Start_End, printf("SIOCGHWADDR");); bcopy((caddr_t) sc->sc_addr, (caddr_t) &ifr->ifr_data, sizeof(sc->sc_addr)); break; #endif case SIOCADDMULTI: DODEBUG(Start_End, printf("SIOCADDMULTI");); case SIOCDELMULTI: DODEBUG(Start_End, printf("SIOCDELMULTI");); /* XXX Support not done yet. */ error = EINVAL; break; default: DODEBUG(Start_End, printf("unknown");); error = EINVAL; } splx(s); DODEBUG(Start_End, printf("\nex_ioctl%d: finish\n", ifp->if_unit);); return(error); } void ex_reset(int unit) { struct ex_softc *sc = &ex_sc[unit]; int s; DODEBUG(Start_End, printf("ex_reset%d: start\n", unit);); s = splimp(); ex_stop(unit); ex_init(sc); splx(s); DODEBUG(Start_End, printf("ex_reset%d: finish\n", unit);); } void ex_watchdog(struct ifnet *ifp) { DODEBUG(Start_End, printf("ex_watchdog%d: start\n", ifp->if_unit);); ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE watchdog\n");); ifp->if_oerrors++; ex_reset(ifp->if_unit); ex_start(ifp); DODEBUG(Start_End, printf("ex_watchdog%d: finish\n", ifp->if_unit);); } static u_short eeprom_read(int iobase, int location) { int i; u_short data = 0; int ee_addr; int read_cmd = location | EE_READ_CMD; short ctrl_val = EECS; ee_addr = iobase + EEPROM_REG; outb(iobase + CMD_REG, Bank2_Sel); outb(ee_addr, EECS); for (i = 8; i >= 0; i--) { short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI : ctrl_val; outb(ee_addr, outval); outb(ee_addr, outval | EESK); DELAY(3); outb(ee_addr, outval); DELAY(2); } outb(ee_addr, ctrl_val); for (i = 16; i > 0; i--) { outb(ee_addr, ctrl_val | EESK); DELAY(3); data = (data << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0); outb(ee_addr, ctrl_val); DELAY(2); } ctrl_val &= ~EECS; outb(ee_addr, ctrl_val | EESK); DELAY(3); outb(ee_addr, ctrl_val); DELAY(2); outb(iobase + CMD_REG, Bank0_Sel); return(data); } #endif /* NEX > 0 */