/* -*- Fundamental -*- keep Emacs from f***ing up the formatting */ /* * Copyright (c) 1993 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Steve McCanne's microtime code * $Id: microtime.s,v 1.2 1996/07/23 07:45:55 asami Exp $ */ #include #include #ifdef PC98 #include #include #include #else #include #include #include #endif ENTRY(microtime) #if defined(I586_CPU) || defined(I686_CPU) movl _i586_ctr_freq, %ecx testl %ecx, %ecx jne pentium_microtime #else xorl %ecx, %ecx /* clear ecx */ #endif movb $TIMER_SEL0|TIMER_LATCH, %al /* prepare to latch */ pushfl cli /* disable interrupts */ outb %al, $TIMER_MODE /* latch timer 0's counter */ inb $TIMER_CNTR0, %al /* read counter value, LSB first */ movb %al, %cl inb $TIMER_CNTR0, %al movb %al, %ch /* * Now check for counter overflow. This is tricky because the * timer chip doesn't let us atomically read the current counter * value and the output state (i.e., overflow state). We have * to read the ICU interrupt request register (IRR) to see if the * overflow has occured. Because we lack atomicity, we use * the (very accurate) heuristic that we only check for * overflow if the value read is close to the interrupt period. * E.g., if we just checked the IRR, we might read a non-overflowing * value close to 0, experience overflow, then read this overflow * from the IRR, and mistakenly add a correction to the "close * to zero" value. * * We compare the counter value to the prepared overflow threshold. * If the counter value is less than this, we assume the counter * didn't overflow between disabling timer interrupts and latching * the counter value above. For example, we assume that interrupts * are enabled when we are called (or were disabled just a few * cycles before we are called and that the instructions before the * "cli" are fast) and that the "cli" and "outb" instructions take * less than 10 timer cycles to execute. The last assumption is * very safe. * * Otherwise, the counter might have overflowed. We check for this * condition by reading the interrupt request register out of the ICU. * If it overflowed, we add in one clock period. * * The heuristic is "very accurate" because it works 100% if we're * called with interrupts enabled. Otherwise, it might not work. * Currently, only siointrts() calls us with interrupts disabled, so * the problem can be avoided at some cost to the general case. The * costs are complications in callers to disable interrupts in * IO_ICU1 and extra reads of the IRR forced by a conservative * overflow threshold. * * In 2.0, we are called at splhigh() from mi_switch(), so we have * to allow for the overflow bit being in ipending instead of in * the IRR. Our caller may have executed many instructions since * ipending was set, so the heuristic for the IRR is inappropriate * for ipending. However, we don't need another heuristic, since * the "cli" suffices to lock ipending. */ movl _timer0_max_count, %edx /* prepare for 2 uses */ testb $IRQ0, _ipending /* is a soft timer interrupt pending? */ jne overflow /* Do we have a possible overflow condition? */ cmpl _timer0_overflow_threshold, %ecx jbe 1f inb $IO_ICU1, %al /* read IRR in ICU */ testb $IRQ0, %al /* is a hard timer interrupt pending? */ je 1f overflow: subl %edx, %ecx /* some intr pending, count timer down through 0 */ 1: /* * Subtract counter value from max count since it is a count-down value. */ subl %ecx, %edx /* Adjust for partial ticks. */ addl _timer0_prescaler_count, %edx /* * To divide by 1.193200, we multiply by 27465 and shift right by 15. * * The multiplier was originally calculated to be * * 2^18 * 1000000 / 1193200 = 219698. * * The frequency is 1193200 to be compatible with rounding errors in * the calculation of the usual maximum count. 2^18 is the largest * power of 2 such that multiplying `i' by it doesn't overflow for i * in the range of interest ([0, 11932 + 5)). We adjusted the * multiplier a little to minimise the average of * * fabs(i / 1.1193200 - ((multiplier * i) >> 18)) * * for i in the range and then removed powers of 2 to speed up the * multiplication and to avoid overflow for i outside the range * (i may be as high as 2^17 if the timer is programmed to its * maximum maximum count). The absolute error is less than 1 for * all i in the range. */ #ifdef PC98 #ifndef AUTO_CLOCK #ifndef PC98_8M #if 0 imul $6667, %edx #else leal (%edx,%edx,4), %eax /* a = 5 */ leal (%edx,%eax,2), %eax /* a = 11 */ movl %eax, %ecx /* c = 11 */ addl %edx, %eax /* a = 12 */ addl %edx, %eax /* a = 13 */ shl $9, %eax /* a = 6656 */ addl %ecx, %eax /* a = 6667 */ #endif /* 0 */ shr $14, %eax #else /* !PC98_8M */ #if 0 imul $16411, %edx #else leal (%edx,%edx,2), %eax /* a = 3 */ leal (%eax,%eax,8), %eax /* a = 27 */ movl %eax, %ecx /* c = 27 */ movl %edx, %eax /* a = 1 */ shl $14, %eax /* a = 16384 */ addl %ecx, %eax /* a = 16411 */ #endif /* 0 */ shr $15, %eax #endif /* !PC98_8M */ #else /* !AUTO_CLOCK */ .globl _pc98_system_parameter testb $0x80, _pc98_system_parameter + 0x501 - 0x400 jnz 1f #if 0 imul $6667, %edx #else leal (%edx,%edx,4), %eax /* a = 5 */ leal (%edx,%eax,2), %eax /* a = 11 */ movl %eax, %ecx /* c = 11 */ addl %edx, %eax /* a = 12 */ addl %edx, %eax /* a = 13 */ shl $9, %eax /* a = 6656 */ addl %ecx, %eax /* a = 6667 */ #endif /* 0 */ shr $14, %eax jmp 2f 1: #if 0 imul $16411, %edx #else leal (%edx,%edx,2), %eax /* a = 3 */ leal (%eax,%eax,8), %eax /* a = 27 */ movl %eax, %ecx /* c = 27 */ movl %edx, %eax /* a = 1 */ shl $14, %eax /* a = 16384 */ addl %ecx, %eax /* a = 16411 */ #endif /* 0 */ shr $15, %eax 2: #endif /* !AUTO_CLOCK */ #else /* IBM-PC */ #if 0 imul $27465, %edx /* 25 cycles on a 486 */ #else leal (%edx,%edx,2), %eax /* a = 3 2 cycles on a 486 */ leal (%edx,%eax,4), %eax /* a = 13 2 */ movl %eax, %ecx /* c = 13 1 */ shl $5, %eax /* a = 416 2 */ addl %ecx, %eax /* a = 429 1 */ leal (%edx,%eax,8), %eax /* a = 3433 2 */ leal (%edx,%eax,8), %eax /* a = 27465 2 (total 12 cycles) */ #endif /* 0 */ shr $15, %eax #endif /* PC98 */ common_microtime: addl _time+4, %eax /* usec += time.tv_sec */ movl _time, %edx /* sec = time.tv_sec */ popfl /* restore interrupt mask */ cmpl $1000000, %eax /* usec valid? */ jb 1f subl $1000000, %eax /* adjust usec */ incl %edx /* bump sec */ 1: movl 4(%esp), %ecx /* load timeval pointer arg */ movl %edx, (%ecx) /* tvp->tv_sec = sec */ movl %eax, 4(%ecx) /* tvp->tv_usec = usec */ ret #if defined(I586_CPU) || defined(I686_CPU) ALIGN_TEXT pentium_microtime: pushfl cli .byte 0x0f, 0x31 /* RDTSC */ subl _i586_ctr_bias, %eax mull _i586_ctr_multiplier movl %edx, %eax jmp common_microtime #endif