/************************************************************************** ** ** $Id: pcibus.c,v 1.16 1995/10/09 21:56:24 se Exp $ ** ** pci bus subroutines for i386 architecture. ** ** FreeBSD ** **------------------------------------------------------------------------- ** ** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved. ** ** Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions ** are met: ** 1. Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** 2. Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in the ** documentation and/or other materials provided with the distribution. ** 3. The name of the author may not be used to endorse or promote products ** derived from this software without specific prior written permission. ** ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** *************************************************************************** */ #include #include #include #include /* bootverbose */ #include #include #include #include #include #include /*----------------------------------------------------------------- ** ** The following functions are provided by the pci bios. ** They are used only by the pci configuration. ** ** pcibus_setup(): ** Probes for a pci system. ** Sets pci_maxdevice and pci_mechanism. ** ** pcibus_tag(): ** Creates a handle for pci configuration space access. ** This handle is given to the read/write functions. ** ** pcibus_ftag(): ** Creates a modified handle. ** ** pcibus_read(): ** Read a long word from the pci configuration space. ** Requires a tag (from pcitag) and the register ** number (should be a long word alligned one). ** ** pcibus_write(): ** Writes a long word to the pci configuration space. ** Requires a tag (from pcitag), the register number ** (should be a long word alligned one), and a value. ** ** pcibus_regirq(): ** Register an interupt handler for a pci device. ** Requires a tag (from pcitag), the register number ** (should be a long word alligned one), and a value. ** **----------------------------------------------------------------- */ static int pcibus_check (void); static void pcibus_setup (void); static pcici_t pcibus_tag (u_char bus, u_char device, u_char func); static pcici_t pcibus_ftag (pcici_t tag, u_char func); static u_long pcibus_read (pcici_t tag, u_long reg); static void pcibus_write (pcici_t tag, u_long reg, u_long data); static int pcibus_ihandler_attach (int irq, void(*ihandler)(), int arg, unsigned* maskp); static int pcibus_ihandler_detach (int irq, void(*handler)()); static int pcibus_imask_include (int irq, unsigned* maskptr); static int pcibus_imask_exclude (int irq, unsigned* maskptr); struct pcibus i386pci = { "pci", pcibus_setup, pcibus_tag, pcibus_ftag, pcibus_read, pcibus_write, ICU_LEN, pcibus_ihandler_attach, pcibus_ihandler_detach, pcibus_imask_include, pcibus_imask_exclude, }; /* ** Announce structure to generic driver */ DATA_SET (pcibus_set, i386pci); /*-------------------------------------------------------------------- ** ** Determine configuration mode ** **-------------------------------------------------------------------- */ #define CONF1_ADDR_PORT 0x0cf8 #define CONF1_DATA_PORT 0x0cfc #define CONF1_ENABLE 0x80000000ul #define CONF1_ENABLE_CHK 0x80000000ul #define CONF1_ENABLE_CHK1 0xFF000001ul #define CONF1_ENABLE_MSK1 0x80000001ul #define CONF1_ENABLE_RES1 0x80000000ul #define CONF2_ENABLE_PORT 0x0cf8 #define CONF2_FORWARD_PORT 0x0cfa #define CONF2_ENABLE_CHK 0x0e #define CONF2_ENABLE_RES 0x0e static int pcibus_check (void) { u_char device; if (bootverbose) printf ("pcibus_check:\tdevice "); for (device = 0; device < pci_maxdevice; device++) { unsigned long id; if (bootverbose) printf ("%d ", device); id = pcibus_read (pcibus_tag (0,device,0), 0); if (id != 0xfffffffful) { if (bootverbose) printf ("is there (id=%08lx)\n", id); return 1; } } if (bootverbose) printf ("-- nothing found\n"); return 0; } static void pcibus_setup (void) { unsigned long mode1res,oldval1; unsigned char mode2res,oldval2; oldval1 = inl (CONF1_ADDR_PORT); if (bootverbose) { printf ("pcibus_setup(1):\tmode1 addr port (0x0cf8) is 0x%08lx\n", oldval1); } /*--------------------------------------- ** Assume configuration mechanism 1 for now ... **--------------------------------------- */ if ((oldval1 & CONF1_ENABLE) == 0) { pci_mechanism = 1; pci_maxdevice = 32; outl (CONF1_ADDR_PORT, CONF1_ENABLE_CHK); outb (CONF1_ADDR_PORT +3, 0); mode1res = inl (CONF1_ADDR_PORT); outl (CONF1_ADDR_PORT, oldval1); if (bootverbose) printf ("pcibus_setup(1a):\tmode1res=0x%08lx (0x%08lx)\n", mode1res, CONF1_ENABLE_CHK); if (mode1res) { if (pcibus_check()) return; }; outl (CONF1_ADDR_PORT, CONF1_ENABLE_CHK1); mode1res = inl(CONF1_ADDR_PORT); outl (CONF1_ADDR_PORT, oldval1); if (bootverbose) printf ("pcibus_setup(1b):\tmode1res=0x%08lx (0x%08lx)\n", mode1res, CONF1_ENABLE_CHK1); if ((mode1res & CONF1_ENABLE_MSK1) == CONF1_ENABLE_RES1) { if (pcibus_check()) return; }; } /*--------------------------------------- ** Try configuration mechanism 2 ... **--------------------------------------- */ oldval2 = inb (CONF2_ENABLE_PORT); if (bootverbose) { printf ("pcibus_setup(2):\tmode 2 enable port (0x0cf8) is 0x%02x\n", oldval2); } if ((oldval2 & 0xf0) == 0) { pci_mechanism = 2; pci_maxdevice = 16; outb (CONF2_ENABLE_PORT, CONF2_ENABLE_CHK); mode2res = inb(CONF2_ENABLE_PORT); outb (CONF2_ENABLE_PORT, oldval2); if (bootverbose) printf ("pcibus_setup(2a):\tmode2res=0x%02x (0x%02x)\n", mode2res, CONF2_ENABLE_CHK); if (mode2res == CONF2_ENABLE_RES) { if (bootverbose) printf ("pcibus_setup(2a):\tnow trying mechanism 2\n"); if (pcibus_check()) return; } } /*--------------------------------------- ** No PCI bus host bridge found **--------------------------------------- */ pci_mechanism = 0; pci_maxdevice = 0; } /*-------------------------------------------------------------------- ** ** Build a pcitag from bus, device and function number ** **-------------------------------------------------------------------- */ static pcici_t pcibus_tag (unsigned char bus, unsigned char device, unsigned char func) { pcici_t tag; tag.cfg1 = 0; if (func >= 8) return tag; switch (pci_mechanism) { case 1: if (device < 32) { tag.cfg1 = CONF1_ENABLE | (((u_long) bus ) << 16ul) | (((u_long) device) << 11ul) | (((u_long) func ) << 8ul); } break; case 2: if (device < 16) { tag.cfg2.port = 0xc000 | (device << 8ul); tag.cfg2.enable = 0xf0 | (func << 1ul); tag.cfg2.forward = bus; } break; }; return tag; } static pcici_t pcibus_ftag (pcici_t tag, u_char func) { switch (pci_mechanism) { case 1: tag.cfg1 &= ~0x700ul; tag.cfg1 |= (((u_long) func) << 8ul); break; case 2: tag.cfg2.enable = 0xf0 | (func << 1ul); break; }; return tag; } /*-------------------------------------------------------------------- ** ** Read register from configuration space. ** **-------------------------------------------------------------------- */ static u_long pcibus_read (pcici_t tag, u_long reg) { u_long addr, data = 0; if (!tag.cfg1) return (0xfffffffful); switch (pci_mechanism) { case 1: addr = tag.cfg1 | (reg & 0xfc); #ifdef PCI_DEBUG printf ("pci_conf_read(1): addr=%x ", addr); #endif outl (CONF1_ADDR_PORT, addr); data = inl (CONF1_DATA_PORT); outl (CONF1_ADDR_PORT, 0 ); break; case 2: addr = tag.cfg2.port | (reg & 0xfc); #ifdef PCI_DEBUG printf ("pci_conf_read(2): addr=%x ", addr); #endif outb (CONF2_ENABLE_PORT , tag.cfg2.enable ); outb (CONF2_FORWARD_PORT, tag.cfg2.forward); data = inl ((u_short) addr); outb (CONF2_ENABLE_PORT, 0); outb (CONF2_FORWARD_PORT, 0); break; }; #ifdef PCI_DEBUG printf ("data=%x\n", data); #endif return (data); } /*-------------------------------------------------------------------- ** ** Write register into configuration space. ** **-------------------------------------------------------------------- */ static void pcibus_write (pcici_t tag, u_long reg, u_long data) { u_long addr; if (!tag.cfg1) return; switch (pci_mechanism) { case 1: addr = tag.cfg1 | (reg & 0xfc); #ifdef PCI_DEBUG printf ("pci_conf_write(1): addr=%x data=%x\n", addr, data); #endif outl (CONF1_ADDR_PORT, addr); outl (CONF1_DATA_PORT, data); outl (CONF1_ADDR_PORT, 0 ); break; case 2: addr = tag.cfg2.port | (reg & 0xfc); #ifdef PCI_DEBUG printf ("pci_conf_write(2): addr=%x data=%x\n", addr, data); #endif outb (CONF2_ENABLE_PORT, tag.cfg2.enable); outb (CONF2_FORWARD_PORT, tag.cfg2.forward); outl ((u_short) addr, data); outb (CONF2_ENABLE_PORT, 0); outb (CONF2_FORWARD_PORT, 0); break; }; } /*----------------------------------------------------------------------- ** ** Register an interupt handler for a pci device. ** **----------------------------------------------------------------------- */ static int pcibus_ihandler_attach (int irq, void(*func)(), int arg, unsigned * maskptr) { int result; result = register_intr( irq, /* isa irq */ 0, /* deviced?? */ 0, /* flags? */ (inthand2_t*) func, /* handler */ maskptr, /* mask pointer */ arg); /* handler arg */ if (result) { printf ("@@@ pcibus_ihandler_attach: result=%d\n", result); return (result); }; update_intr_masks(); INTREN ((1ul<