/*- * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)specialreg.h 7.1 (Berkeley) 5/9/91 * $FreeBSD$ */ #ifndef _MACHINE_SPECIALREG_H_ #define _MACHINE_SPECIALREG_H_ /* * Bits in 386 special registers: */ #define CR0_PE 0x00000001 /* Protected mode Enable */ #define CR0_MP 0x00000002 /* "Math" (fpu) Present */ #define CR0_EM 0x00000004 /* EMulate FPU instructions. (trap ESC only) */ #define CR0_TS 0x00000008 /* Task Switched (if MP, trap ESC and WAIT) */ #define CR0_PG 0x80000000 /* PaGing enable */ /* * Bits in 486 special registers: */ #define CR0_NE 0x00000020 /* Numeric Error enable (EX16 vs IRQ13) */ #define CR0_WP 0x00010000 /* Write Protect (honor page protect in all modes) */ #define CR0_AM 0x00040000 /* Alignment Mask (set to enable AC flag) */ #define CR0_NW 0x20000000 /* Not Write-through */ #define CR0_CD 0x40000000 /* Cache Disable */ /* * Bits in PPro special registers */ #define CR4_VME 0x00000001 /* Virtual 8086 mode extensions */ #define CR4_PVI 0x00000002 /* Protected-mode virtual interrupts */ #define CR4_TSD 0x00000004 /* Time stamp disable */ #define CR4_DE 0x00000008 /* Debugging extensions */ #define CR4_PSE 0x00000010 /* Page size extensions */ #define CR4_PAE 0x00000020 /* Physical address extension */ #define CR4_MCE 0x00000040 /* Machine check enable */ #define CR4_PGE 0x00000080 /* Page global enable */ #define CR4_PCE 0x00000100 /* Performance monitoring counter enable */ #define CR4_FXSR 0x00000200 /* Fast FPU save/restore used by OS */ #define CR4_XMM 0x00000400 /* enable SIMD/MMX2 to use except 16 */ /* * CPUID instruction features register */ #define CPUID_FPU 0x00000001 #define CPUID_VME 0x00000002 #define CPUID_DE 0x00000004 #define CPUID_PSE 0x00000008 #define CPUID_TSC 0x00000010 #define CPUID_MSR 0x00000020 #define CPUID_PAE 0x00000040 #define CPUID_MCE 0x00000080 #define CPUID_CX8 0x00000100 #define CPUID_APIC 0x00000200 #define CPUID_B10 0x00000400 #define CPUID_SEP 0x00000800 #define CPUID_MTRR 0x00001000 #define CPUID_PGE 0x00002000 #define CPUID_MCA 0x00004000 #define CPUID_CMOV 0x00008000 #define CPUID_PAT 0x00010000 #define CPUID_PSE36 0x00020000 #define CPUID_PSN 0x00040000 #define CPUID_CLFSH 0x00080000 #define CPUID_B20 0x00100000 #define CPUID_DS 0x00200000 #define CPUID_ACPI 0x00400000 #define CPUID_MMX 0x00800000 #define CPUID_FXSR 0x01000000 #define CPUID_SSE 0x02000000 #define CPUID_XMM 0x02000000 #define CPUID_SSE2 0x04000000 #define CPUID_SS 0x08000000 #define CPUID_HTT 0x10000000 #define CPUID_TM 0x20000000 #define CPUID_IA64 0x40000000 #define CPUID_PBE 0x80000000 #define CPUID2_SSE3 0x00000001 #define CPUID2_MON 0x00000008 #define CPUID2_DS_CPL 0x00000010 #define CPUID2_VMX 0x00000020 #define CPUID2_EST 0x00000080 #define CPUID2_TM2 0x00000100 #define CPUID2_CNTXID 0x00000400 #define CPUID2_CX16 0x00002000 #define CPUID2_XTPR 0x00004000 /* * Important bits in the AMD extended cpuid flags */ #define AMDID_SYSCALL 0x00000800 #define AMDID_MP 0x00080000 #define AMDID_NX 0x00100000 #define AMDID_EXT_MMX 0x00400000 #define AMDID_FFXSR 0x01000000 #define AMDID_RDTSCP 0x08000000 #define AMDID_LM 0x20000000 #define AMDID_EXT_3DNOW 0x40000000 #define AMDID_3DNOW 0x80000000 #define AMDID2_LAHF 0x00000001 #define AMDID2_CMP 0x00000002 #define AMDID2_SVM 0x00000004 #define AMDID2_EXT_APIC 0x00000008 #define AMDID2_CR8 0x00000010 /* * CPUID instruction 1 ebx info */ #define CPUID_BRAND_INDEX 0x000000ff #define CPUID_CLFUSH_SIZE 0x0000ff00 #define CPUID_HTT_CORES 0x00ff0000 #define CPUID_LOCAL_APIC_ID 0xff000000 /* * AMD extended function 8000_0008h ecx info */ #define AMDID_CMP_CORES 0x000000ff /* * Model-specific registers for the i386 family */ #define MSR_P5_MC_ADDR 0x000 #define MSR_P5_MC_TYPE 0x001 #define MSR_TSC 0x010 #define MSR_P5_CESR 0x011 #define MSR_P5_CTR0 0x012 #define MSR_P5_CTR1 0x013 #define MSR_IA32_PLATFORM_ID 0x017 #define MSR_APICBASE 0x01b #define MSR_EBL_CR_POWERON 0x02a #define MSR_TEST_CTL 0x033 #define MSR_BIOS_UPDT_TRIG 0x079 #define MSR_BBL_CR_D0 0x088 #define MSR_BBL_CR_D1 0x089 #define MSR_BBL_CR_D2 0x08a #define MSR_BIOS_SIGN 0x08b #define MSR_PERFCTR0 0x0c1 #define MSR_PERFCTR1 0x0c2 #define MSR_MTRRcap 0x0fe #define MSR_BBL_CR_ADDR 0x116 #define MSR_BBL_CR_DECC 0x118 #define MSR_BBL_CR_CTL 0x119 #define MSR_BBL_CR_TRIG 0x11a #define MSR_BBL_CR_BUSY 0x11b #define MSR_BBL_CR_CTL3 0x11e #define MSR_SYSENTER_CS_MSR 0x174 #define MSR_SYSENTER_ESP_MSR 0x175 #define MSR_SYSENTER_EIP_MSR 0x176 #define MSR_MCG_CAP 0x179 #define MSR_MCG_STATUS 0x17a #define MSR_MCG_CTL 0x17b #define MSR_EVNTSEL0 0x186 #define MSR_EVNTSEL1 0x187 #define MSR_THERM_CONTROL 0x19a #define MSR_THERM_INTERRUPT 0x19b #define MSR_THERM_STATUS 0x19c #define MSR_IA32_MISC_ENABLE 0x1a0 #define MSR_DEBUGCTLMSR 0x1d9 #define MSR_LASTBRANCHFROMIP 0x1db #define MSR_LASTBRANCHTOIP 0x1dc #define MSR_LASTINTFROMIP 0x1dd #define MSR_LASTINTTOIP 0x1de #define MSR_ROB_CR_BKUPTMPDR6 0x1e0 #define MSR_MTRRVarBase 0x200 #define MSR_MTRR64kBase 0x250 #define MSR_MTRR16kBase 0x258 #define MSR_MTRR4kBase 0x268 #define MSR_PAT 0x277 #define MSR_MTRRdefType 0x2ff #define MSR_MC0_CTL 0x400 #define MSR_MC0_STATUS 0x401 #define MSR_MC0_ADDR 0x402 #define MSR_MC0_MISC 0x403 #define MSR_MC1_CTL 0x404 #define MSR_MC1_STATUS 0x405 #define MSR_MC1_ADDR 0x406 #define MSR_MC1_MISC 0x407 #define MSR_MC2_CTL 0x408 #define MSR_MC2_STATUS 0x409 #define MSR_MC2_ADDR 0x40a #define MSR_MC2_MISC 0x40b #define MSR_MC3_CTL 0x40c #define MSR_MC3_STATUS 0x40d #define MSR_MC3_ADDR 0x40e #define MSR_MC3_MISC 0x40f #define MSR_MC4_CTL 0x410 #define MSR_MC4_STATUS 0x411 #define MSR_MC4_ADDR 0x412 #define MSR_MC4_MISC 0x413 /* * Constants related to MSR's. */ #define APICBASE_RESERVED 0x000006ff #define APICBASE_BSP 0x00000100 #define APICBASE_ENABLED 0x00000800 #define APICBASE_ADDRESS 0xfffff000 /* * PAT modes. */ #define PAT_UNCACHEABLE 0x00 #define PAT_WRITE_COMBINING 0x01 #define PAT_WRITE_THROUGH 0x04 #define PAT_WRITE_PROTECTED 0x05 #define PAT_WRITE_BACK 0x06 #define PAT_UNCACHED 0x07 #define PAT_VALUE(i, m) ((long long)(m) << (8 * (i))) #define PAT_MASK(i) PAT_VALUE(i, 0xff) /* * Constants related to MTRRs */ #define MTRR_N64K 8 /* numbers of fixed-size entries */ #define MTRR_N16K 16 #define MTRR_N4K 64 /* * Cyrix configuration registers, accessible as IO ports. */ #define CCR0 0xc0 /* Configuration control register 0 */ #define CCR0_NC0 0x01 /* First 64K of each 1M memory region is non-cacheable */ #define CCR0_NC1 0x02 /* 640K-1M region is non-cacheable */ #define CCR0_A20M 0x04 /* Enables A20M# input pin */ #define CCR0_KEN 0x08 /* Enables KEN# input pin */ #define CCR0_FLUSH 0x10 /* Enables FLUSH# input pin */ #define CCR0_BARB 0x20 /* Flushes internal cache when entering hold state */ #define CCR0_CO 0x40 /* Cache org: 1=direct mapped, 0=2x set assoc */ #define CCR0_SUSPEND 0x80 /* Enables SUSP# and SUSPA# pins */ #define CCR1 0xc1 /* Configuration control register 1 */ #define CCR1_RPL 0x01 /* Enables RPLSET and RPLVAL# pins */ #define CCR1_SMI 0x02 /* Enables SMM pins */ #define CCR1_SMAC 0x04 /* System management memory access */ #define CCR1_MMAC 0x08 /* Main memory access */ #define CCR1_NO_LOCK 0x10 /* Negate LOCK# */ #define CCR1_SM3 0x80 /* SMM address space address region 3 */ #define CCR2 0xc2 #define CCR2_WB 0x02 /* Enables WB cache interface pins */ #define CCR2_SADS 0x02 /* Slow ADS */ #define CCR2_LOCK_NW 0x04 /* LOCK NW Bit */ #define CCR2_SUSP_HLT 0x08 /* Suspend on HALT */ #define CCR2_WT1 0x10 /* WT region 1 */ #define CCR2_WPR1 0x10 /* Write-protect region 1 */ #define CCR2_BARB 0x20 /* Flushes write-back cache when entering hold state. */ #define CCR2_BWRT 0x40 /* Enables burst write cycles */ #define CCR2_USE_SUSP 0x80 /* Enables suspend pins */ #define CCR3 0xc3 #define CCR3_SMILOCK 0x01 /* SMM register lock */ #define CCR3_NMI 0x02 /* Enables NMI during SMM */ #define CCR3_LINBRST 0x04 /* Linear address burst cycles */ #define CCR3_SMMMODE 0x08 /* SMM Mode */ #define CCR3_MAPEN0 0x10 /* Enables Map0 */ #define CCR3_MAPEN1 0x20 /* Enables Map1 */ #define CCR3_MAPEN2 0x40 /* Enables Map2 */ #define CCR3_MAPEN3 0x80 /* Enables Map3 */ #define CCR4 0xe8 #define CCR4_IOMASK 0x07 #define CCR4_MEM 0x08 /* Enables momory bypassing */ #define CCR4_DTE 0x10 /* Enables directory table entry cache */ #define CCR4_FASTFPE 0x20 /* Fast FPU exception */ #define CCR4_CPUID 0x80 /* Enables CPUID instruction */ #define CCR5 0xe9 #define CCR5_WT_ALLOC 0x01 /* Write-through allocate */ #define CCR5_SLOP 0x02 /* LOOP instruction slowed down */ #define CCR5_LBR1 0x10 /* Local bus region 1 */ #define CCR5_ARREN 0x20 /* Enables ARR region */ #define CCR6 0xea #define CCR7 0xeb /* Performance Control Register (5x86 only). */ #define PCR0 0x20 #define PCR0_RSTK 0x01 /* Enables return stack */ #define PCR0_BTB 0x02 /* Enables branch target buffer */ #define PCR0_LOOP 0x04 /* Enables loop */ #define PCR0_AIS 0x08 /* Enables all instrcutions stalled to serialize pipe. */ #define PCR0_MLR 0x10 /* Enables reordering of misaligned loads */ #define PCR0_BTBRT 0x40 /* Enables BTB test register. */ #define PCR0_LSSER 0x80 /* Disable reorder */ /* Device Identification Registers */ #define DIR0 0xfe #define DIR1 0xff /* * The following four 3-byte registers control the non-cacheable regions. * These registers must be written as three separate bytes. * * NCRx+0: A31-A24 of starting address * NCRx+1: A23-A16 of starting address * NCRx+2: A15-A12 of starting address | NCR_SIZE_xx. * * The non-cacheable region's starting address must be aligned to the * size indicated by the NCR_SIZE_xx field. */ #define NCR1 0xc4 #define NCR2 0xc7 #define NCR3 0xca #define NCR4 0xcd #define NCR_SIZE_0K 0 #define NCR_SIZE_4K 1 #define NCR_SIZE_8K 2 #define NCR_SIZE_16K 3 #define NCR_SIZE_32K 4 #define NCR_SIZE_64K 5 #define NCR_SIZE_128K 6 #define NCR_SIZE_256K 7 #define NCR_SIZE_512K 8 #define NCR_SIZE_1M 9 #define NCR_SIZE_2M 10 #define NCR_SIZE_4M 11 #define NCR_SIZE_8M 12 #define NCR_SIZE_16M 13 #define NCR_SIZE_32M 14 #define NCR_SIZE_4G 15 /* * The address region registers are used to specify the location and * size for the eight address regions. * * ARRx + 0: A31-A24 of start address * ARRx + 1: A23-A16 of start address * ARRx + 2: A15-A12 of start address | ARR_SIZE_xx */ #define ARR0 0xc4 #define ARR1 0xc7 #define ARR2 0xca #define ARR3 0xcd #define ARR4 0xd0 #define ARR5 0xd3 #define ARR6 0xd6 #define ARR7 0xd9 #define ARR_SIZE_0K 0 #define ARR_SIZE_4K 1 #define ARR_SIZE_8K 2 #define ARR_SIZE_16K 3 #define ARR_SIZE_32K 4 #define ARR_SIZE_64K 5 #define ARR_SIZE_128K 6 #define ARR_SIZE_256K 7 #define ARR_SIZE_512K 8 #define ARR_SIZE_1M 9 #define ARR_SIZE_2M 10 #define ARR_SIZE_4M 11 #define ARR_SIZE_8M 12 #define ARR_SIZE_16M 13 #define ARR_SIZE_32M 14 #define ARR_SIZE_4G 15 /* * The region control registers specify the attributes associated with * the ARRx addres regions. */ #define RCR0 0xdc #define RCR1 0xdd #define RCR2 0xde #define RCR3 0xdf #define RCR4 0xe0 #define RCR5 0xe1 #define RCR6 0xe2 #define RCR7 0xe3 #define RCR_RCD 0x01 /* Disables caching for ARRx (x = 0-6). */ #define RCR_RCE 0x01 /* Enables caching for ARR7. */ #define RCR_WWO 0x02 /* Weak write ordering. */ #define RCR_WL 0x04 /* Weak locking. */ #define RCR_WG 0x08 /* Write gathering. */ #define RCR_WT 0x10 /* Write-through. */ #define RCR_NLB 0x20 /* LBA# pin is not asserted. */ /* AMD Write Allocate Top-Of-Memory and Control Register */ #define AMD_WT_ALLOC_TME 0x40000 /* top-of-memory enable */ #define AMD_WT_ALLOC_PRE 0x20000 /* programmable range enable */ #define AMD_WT_ALLOC_FRE 0x10000 /* fixed (A0000-FFFFF) range enable */ /* VIA ACE crypto featureset: for via_feature_rng */ #define VIA_HAS_RNG 1 /* cpu has RNG */ /* VIA ACE crypto featureset: for via_feature_xcrypt */ #define VIA_HAS_AES 1 /* cpu has AES */ #define VIA_HAS_SHA 2 /* cpu has SHA1 & SHA256 */ #define VIA_HAS_MM 4 /* cpu has RSA instructions */ #define VIA_HAS_AESCTR 8 /* cpu has AES-CTR instructions */ /* Centaur Extended Feature flags */ #define VIA_CPUID_HAS_RNG 0x000004 #define VIA_CPUID_DO_RNG 0x000008 #define VIA_CPUID_HAS_ACE 0x000040 #define VIA_CPUID_DO_ACE 0x000080 #define VIA_CPUID_HAS_ACE2 0x000100 #define VIA_CPUID_DO_ACE2 0x000200 #define VIA_CPUID_HAS_PHE 0x000400 #define VIA_CPUID_DO_PHE 0x000800 #define VIA_CPUID_HAS_PMM 0x001000 #define VIA_CPUID_DO_PMM 0x002000 /* VIA ACE xcrypt-* instruction context control options */ #define VIA_CRYPT_CWLO_ROUND_M 0x0000000f #define VIA_CRYPT_CWLO_ALG_M 0x00000070 #define VIA_CRYPT_CWLO_ALG_AES 0x00000000 #define VIA_CRYPT_CWLO_KEYGEN_M 0x00000080 #define VIA_CRYPT_CWLO_KEYGEN_HW 0x00000000 #define VIA_CRYPT_CWLO_KEYGEN_SW 0x00000080 #define VIA_CRYPT_CWLO_NORMAL 0x00000000 #define VIA_CRYPT_CWLO_INTERMEDIATE 0x00000100 #define VIA_CRYPT_CWLO_ENCRYPT 0x00000000 #define VIA_CRYPT_CWLO_DECRYPT 0x00000200 #define VIA_CRYPT_CWLO_KEY128 0x0000000a /* 128bit, 10 rds */ #define VIA_CRYPT_CWLO_KEY192 0x0000040c /* 192bit, 12 rds */ #define VIA_CRYPT_CWLO_KEY256 0x0000080e /* 256bit, 15 rds */ #ifndef LOCORE static __inline u_char read_cyrix_reg(u_char reg) { outb(0x22, reg); return inb(0x23); } static __inline void write_cyrix_reg(u_char reg, u_char data) { outb(0x22, reg); outb(0x23, data); } #endif #endif /* !_MACHINE_SPECIALREG_H_ */