# # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # # $Id: LINT,v 1.288 1996/11/08 02:38:35 asami Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from # this file as required. # # # This directive is mandatory; it defines the architecture to be # configured for; in this case, the 386 family. You must also specify # at least one CPU (the one you intend to run on); deleting the # specification for CPUs you don't need to use may make parts of the # system run faster # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" # aka Pentium(tm) cpu "I686_CPU" # aka Pentium Pro(tm) # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a complicated formula defined in param.c. # maxusers 10 # # Under some circumstances it is convenient to increase the defaults # for the maximum number of processes per user and the maximum number # of open files files per user. E.g., (1) in a large news server, user # `news' may need more than 100 concurrent processes. (2) a user may # need lots of windows under X. In both cases, it may be inconvenient # to start all the processes from a parent whose soft rlimit on the # number of processes is large enough. The following options work by # changing the soft rlimits for init. # options CHILD_MAX=128 options OPEN_MAX=128 # # Under some circumstances it is useful to have an extra number of # vnode data structures allocated at boot time. In particular, # usenet news servers can benefit if there are enough vnodes to # cache the busiest newsgroup and overview directories. Beware that # this is an expensive option, it consumes physical non-pageable ram. # A busy news server may benefit from 10,000 extra vnodes or so. # options EXTRAVNODES=1 # # A math emulator is mandatory if you wish to run on hardware which # does not have a floating-point processor. Pick either the original, # bogus (but freely-distributable) math emulator, or a much more # fully-featured but GPL-licensed emulator taken from Linux. # options MATH_EMULATE #Support for x87 emulation # Don't enable both of these in a real config. options GPL_MATH_EMULATE #Support for x87 emulation via #new math emulator # When this is set, be extra conservative in various parts of the kernel # and choose functionality over speed (on the widest variety of systems). options FAILSAFE # When this is set, bcopy() will use an unrolled loop using # floating point registers. It makes bcopy() run 30-100% # faster on Pentiums and makes no difference or slower on non-Pentium # (including P6) systems. # # However, even when this is set, there is a run-time check for CPU # type so the routine will never be invoked for a wrong architecture. # It will become the default after some testing period. options "I586_OPTIMIZED_BCOPY" # This is like I586_OPTIMIZED_BCOPY except it controls bzero(). options "I586_OPTIMIZED_BZERO" # # This directive defines a number of things: # - The compiled kernel is to be called `kernel' # - The root filesystem might be on partition wd0a # - Crash dumps will be written to wd0b, if possible. Specifying the # dump device here is not recommended. Use dumpon(8). # config kernel root on wd0 dumps on wd0 ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. # options "COMPAT_43" # # Allow user-mode programs to manipulate their local descriptor tables. # This option is required for the WINE Windows(tm) emulator, and is # not used by anything else (that we know of). # options USER_LDT #allow user-level control of i386 ldt # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Enable the kernel debugger. # options DDB # # Don't drop into DDB for a panic. Intended for unattended operation # where you may want to drop to DDB from the console, but still want # the machine to recover from a panic # options DDB_UNATTENDED # # KTRACE enables the system-call tracing facility ktrace(2). # options KTRACE #kernel tracing # # The DIAGNOSTIC option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options DIAGNOSTIC # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # options PERFMON # XXX - this doesn't belong here. # Allow ordinary users to take the console - this is useful for X. options UCONSOLE # XXX - this doesn't belong here either options USERCONFIG #boot -c editor options USERCONFIG_BOOT #imply -c and parse info area options VISUAL_USERCONFIG #visual boot -c editor ##################################################################### # NETWORKING OPTIONS # # Protocol families: # Only the INET (Internet) family is officially supported in FreeBSD. # Source code for the NS (Xerox Network Service) is provided for amusement # value. # options INET #Internet communications protocols options IPX #IPX/SPX communications protocols options IPXIP #IPX in IP encapsulation (not available) options IPTUNNEL #IP in IPX encapsulation (not available) options IPXPRINTFS=0 #IPX/SPX Console Debugging Information options IPX_ERRPRINTFS=0 #IPX/SPX Console Debugging Information options NETATALK #Appletalk communications protocols # These are currently broken but are shipped due to interest. #options NS #Xerox NS protocols # These are currently broken and are no longer shipped due to lack # of interest. #options CCITT #X.25 network layer #options ISO #options TPIP #ISO TP class 4 over IP #options TPCONS #ISO TP class 0 over X.25 #options LLC #X.25 link layer for Ethernets #options HDLC #X.25 link layer for serial lines #options EON #ISO CLNP over IP #options NSIP #XNS over IP # # Network interfaces: # The `loop' pseudo-device is MANDATORY when networking is enabled. # The `ether' pseudo-device provides generic code to handle # Ethernets; it is MANDATORY when a Ethernet device driver is # configured. # The 'fddi' pseudo-device provides generic code to support FDDI. # The `sppp' pseudo-device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). # The `sl' pseudo-device implements the Serial Line IP (SLIP) service. # The `ppp' pseudo-device implements the Point-to-Point Protocol. # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. # The `disc' pseudo-device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing purposes. # The `tun' pseudo-device implements the User Process PPP (iijppp) # pseudo-device ether #Generic Ethernet pseudo-device fddi #Generic FDDI pseudo-device sppp #Generic Synchronous PPP pseudo-device loop #Network loopback device pseudo-device sl 2 #Serial Line IP pseudo-device ppp 2 #Point-to-point protocol pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device disc #Discard device pseudo-device tun 1 #Tunnel driver(user process ppp) # # Internet family options: # # TCP_COMPAT_42 causes the TCP code to emulate certain bugs present in # 4.2BSD. This option should not be used unless you have a 4.2BSD # machine and TCP connections fail. # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted(8). # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert'' # # TCPDEBUG is undocumented. # options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about # dropped packets options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity options IPDIVERT #divert sockets options TCPDEBUG ##################################################################### # FILESYSTEM OPTIONS # # Only the root, /usr, and /tmp filesystems need be statically # compiled; everything else will be automatically loaded at mount # time. (Exception: the UFS family---FFS, MFS, and LFS---cannot # currently be demand-loaded.) Some people still prefer to statically # compile other filesystems as well. # # NB: The LFS, PORTAL, and UNION filesystems are known to be buggy, # and WILL panic your system if you attempt to do anything with them. # They are included here as an incentive for some enterprising soul to # sit down and fix them. # # Note: 4.4BSD NQNFS lease checking has relatively high cost for # _local_ I/O as well as remote I/O. Don't use it unless you will # using NQNFS. # # One of these is mandatory: options FFS #Fast filesystem options NFS #Network File System # The rest are optional: options NQNFS #Enable NQNFS lease checking # options NFS_NOSERVER #Disable the NFS-server code. options "CD9660" #ISO 9660 filesystem options FDESC #File descriptor filesystem options KERNFS #Kernel filesystem options LFS #Log filesystem options MFS #Memory File System options MSDOSFS #MS DOS File System options NULLFS #NULL filesystem options PORTAL #Portal filesystem options PROCFS #Process filesystem options UMAPFS #UID map filesystem options UNION #Union filesystem # This DEVFS is experimental but seems to work options DEVFS #devices filesystem # Make space in the kernel for a MFS root filesystem. Define to the number # of kilobytes to reserve for the filesystem. options MFS_ROOT=10 # Allow the MFS_ROOT code to load the MFS image from floppy if it is missing. options MFS_AUTOLOAD # Allow this many swap-devices. options NSWAPDEV=20 # Disk quotas are supported when this option is enabled. If you # change the value of this option, you must do a `make clean' in your # kernel compile directory in order to get a working kernel. # options QUOTA #enable disk quotas # Add more checking code to various filesystems #options NULLFS_DIAGNOSTIC #options KERNFS_DIAGNOSTIC #options UMAPFS_DIAGNOSTIC #options UNION_DIAGNOSTIC # Add some error checking code to the null_bypass routine # in nthe NULL filesystem #options SAFETY ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so # that a given bus, target, and LUN always come on line as the same # device unit. In earlier versions the unit numbers were assigned # in the order that the devices were probed on the SCSI bus. This # means that if you removed a disk drive, you may have had to rewrite # your /etc/fstab file, and also that you had to be careful when adding # a new disk as it may have been probed earlier and moved your device # configuration around. # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "sd3" then the first # non-wired disk will be assigned sd4. # The syntax for wiring down devices is: # controller scbus0 at ahc0 # Single bus device # controller scbus1 at ahc1 bus 0 # Single bus device # controller scbus3 at ahc2 bus 0 # Twin bus device # controller scbus2 at ahc2 bus 1 # Twin bus device # disk sd0 at scbus0 target 0 unit 0 # disk sd1 at scbus3 target 1 # disk sd2 at scbus2 target 3 # tape st1 at scbus1 target 6 # device cd0 at scbus? # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI # configuration and doesn't have to be explicitly configured. controller scbus0 #base SCSI code device ch0 #SCSI media changers device sd0 #SCSI disks device st0 #SCSI tapes device cd0 #SCSI CD-ROMs device od0 #SCSI optical disk # The previous devices (ch, sd, st, cd) are recognized by config. # config doesn't (and shouldn't) know about these newer ones, # so we have to specify that they are on a SCSI bus with the "at scbus?" # clause. device worm0 at scbus? # SCSI worm device pt0 at scbus? # SCSI processor type device sctarg0 at scbus? # SCSI target # SCSI OPTIONS: # SCSIDEBUG: When defined enables debugging macros # NO_SCSI_SENSE: When defined disables sense descriptions (about 4k) # SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead # of only when booting verbosely. options SCSIDEBUG #options NO_SCSI_SENSE options SCSI_REPORT_GEOMETRY # Options for the `od' optical disk driver: # # If drive returns sense key as 0x02 with vendor specific additional # sense code (ASC) and additional sense code qualifier (ASCQ), or # illegal ASC and ASCQ. This cause an error (NOT READY) and retrying. # To suppress this, use the following option. # options OD_BOGUS_NOT_READY # # For an automatic spindown, try this. Again, preferrably as an # option in your config file. # WARNING! Use at your own risk. Joerg's ancient SONY SMO drive # groks it fine, while Shunsuke's Fujitsu chokes on it and times # out. # options OD_AUTO_TURNOFF ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS # # Of these, only the `log' device is truly mandatory. The `pty' # device usually turns out to be ``effectively mandatory'', as it is # required for `telnetd', `rlogind', `screen', `emacs', and `xterm', # among others. # If you wish to run certain # system utilities which are compressed by default (like /stand/sysinstall) # then `gzip' becomes mandatory too. # pseudo-device pty 16 #Pseudo ttys - can go as high as 256 pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device log #Kernel syslog interface (/dev/klog) pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 4 #Concatenated disk driver # These are only for watching for bitrot in old tty code. # broken #pseudo-device tb # These are only for watching for bitrot in old SCSI code. pseudo-device su #scsi user pseudo-device ssc #super scsi ##################################################################### # HARDWARE DEVICE CONFIGURATION # ISA and EISA devices: # Currently there is no separate support for EISA. There should be. # Micro Channel is not supported at all. # # Mandatory ISA devices: isa, sc or vt, npx # controller isa0 # # Options for `isa': # # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # BOUNCE_BUFFERS provides support for ISA DMA on machines with more # than 16 megabytes of memory. It doesn't hurt on other machines. # Some broken EISA and VLB hardware may need this, too. # # MAXMEM specifies the amount of RAM on the machine; if this is not # specified, FreeBSD will read the amount of memory from the CMOS RAM, # so the amount of memory will be limited to 64MB or 16MB depending on # the BIOS. The amount is in kilobytes, so for a machine with 128MB of # RAM, it would be 131072 (128 * 1024). # # TUNE_1542 enables the automatic ISA bus speed selection for the # Adaptec 1542 boards. Does not work for all boards, use it with caution. # # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to # reset the CPU for reboot. This is needed on some systems with broken # keyboard controllers. # # PAS_JOYSTICK_ENABLE enables the gameport on the ProAudio Spectrum options "AUTO_EOI_1" #options "AUTO_EOI_2" options BOUNCE_BUFFERS options "MAXMEM=(128*1024)" #options "TUNE_1542" #options BROKEN_KEYBOARD_RESET #options PAS_JOYSTICK_ENABLE # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 options XSERVER # include code for XFree86 options FAT_CURSOR # start with block cursor # This PCVT option is for keyboards such as those used on IBM ThinkPad laptops options PCVT_SCANSET=2 # IBM keyboards are non-std # The syscons console driver (sco color console compatible) - default. device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options MAXCONS=16 # number of virtual consoles options SLOW_VGA # do byte-wide i/o's to TS and GDC regs options XT_KEYBOARD # extra initialization for XT keyboard # # This device is mandatory. # # The Numeric Processing eXtension is used to either enable the # coprocessor or enable math emulation. If your machine doesn't contain # a math co-processor, you must *also* add the option "MATH_EMULATE". # THIS IS NOT AN OPTIONAL ENTRY, DO NOT REMOVE IT # device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Optional ISA and EISA devices: # # # SCSI host adapters: `aha', `aic', `bt', `nca' # # aha: Adaptec 154x # ahc: Adaptec 274x/284x/294x # aic: Adaptec 152x and sound cards using the Adaptec AIC-6360 (slow!) # bt: Most Buslogic controllers # nca: ProAudioSpectrum cards using the NCR 5380 or Trantor T130 # uha: UltraStore 14F and 34F # sea: Seagate ST01/02 8 bit controller (slow!) # wds: Western Digital WD7000 controller (no scatter/gather!). # # Note that the order is important in order for Buslogic cards to be # probed correctly. # controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr controller nca1 at isa? port 0x1f84 controller nca2 at isa? port 0x1f8c controller nca3 at isa? port 0x1e88 controller nca4 at isa? port 0x350 bio irq 5 vector ncaintr controller sea0 at isa? bio irq 5 iomem 0xdc000 iosiz 0x2000 vector seaintr controller wds0 at isa? port 0x350 bio irq 15 drq 6 vector wdsintr # # ST-506, ESDI, and IDE hard disks: `wdc' and `wd' # # NB: ``Enhanced IDE'' is NOT supported at this time. # # The flags fields are used to enable the multi-sector I/O and # the 32BIT I/O modes. The flags may be used in either the controller # definition or in the individual disk definitions. The controller # definition is supported for the boot configuration stuff. # # Each drive has a 16 bit flags value defined: # The low 8 bits are the maximum value for the multi-sector I/O, # where 0xff defaults to the maximum that the drive can handle. # The high bit of the 16 bit flags (0x8000) allows probing for # 32 bit transfers. # # The flags field for the drives can be specified in the controller # specification with the low 16 bits for drive 0, and the high 16 bits # for drive 1. # e.g.: #controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x00ff8004 vector wdintr # # specifies that drive 0 will be allowed to probe for 32 bit transfers and # a maximum multi-sector transfer of 4 sectors, and drive 1 will not be # allowed to probe for 32 bit transfers, but will allow multi-sector # transfers up to the maximum that the drive supports. # # controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # # Options for `wdc': # # ATAPI enables the support for ATAPI-compatible IDE devices # options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM # IDE CD-ROM driver - requires wdc controller and ATAPI option device wcd0 # # Standard floppy disk controllers and floppy tapes: `fdc', `fd', and `ft' # controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr # # Activate this line instead of the fdc0 line above if you happen to # have an Insight floppy tape. Probing them proved to be dangerous # for people with floppy disks only, so it's "hidden" behind a flag: #controller fdc0 at isa? port "IO_FD1" bio flags 1 irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 # # Options for `fd': # # FDSEEKWAIT selects a non-default head-settle time (i.e., the time to # wait after a seek is performed). The default value (1/32 s) is # usually sufficient. The units are inverse seconds, so a value of 16 # here means to wait 1/16th of a second; you should choose a power of # two. # XXX: this seems to be missing! options FDSEEKWAIT=16 # # Other standard PC hardware: `lpt', `mse', `psm', `sio', etc. # # lpt: printer port # lpt specials: # port can be specified as ?, this will cause the driver to scan # the BIOS port list; # the irq and vector clauses may be omitted, this # will force the port into polling mode. # mse: Logitech and ATI InPort bus mouse ports # psm: PS/2 mouse port [note: conflicts with sc0/vt0, thus "conflicts" keywd] # sio: serial ports (see sio(4)) device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port "IO_LPT3" tty irq 5 vector lptintr device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Options for psm: options PSM_NO_RESET #don't reset mouse hardware (some laptops) device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr # Options for sio: options COMCONSOLE #prefer serial console to video console options COM_ESP #code for Hayes ESP options COM_MULTIPORT #code for some cards with shared IRQs options DSI_SOFT_MODEM #code for DSI Softmodems options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to #DDB, if available. # # Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc' # # ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver (requires sppp) # cx: Cronyx/Sigma multiport sync/async (with Cisco or PPP framing) # ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 # el: 3Com 3C501 (slow!) # ep: 3Com 3C509 (buggy) # fe: Fujitsu MB86960A/MB86965A Ethernet # fea: DEC DEFEA EISA FDDI adapter # ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210 # le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100, # DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422) # lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL) # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp) # ze: IBM/National Semiconductor PCMCIA ethernet controller. # zp: 3Com PCMCIA Etherlink III (It does not require shared memory for # send/receive operation, but it needs 'iomem' to read/write the # attribute memory) # device ar0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector arintr device cx0 at isa? port 0x240 net irq 15 drq 7 vector cxintr device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr device eg0 at isa? port 0x310 net irq 5 vector egintr device el0 at isa? port 0x300 net irq 9 vector elintr device ep0 at isa? port 0x300 net irq 10 vector epintr device fe0 at isa? port 0x300 net irq ? vector feintr device fea0 at isa? net irq ? vector feaintr device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr device lnc0 at isa? port 0x300 net irq 10 drq 0 vector lncintr device sr0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector srintr device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr # # Audio drivers: `snd', `sb', `pas', `gus', `pca' # # snd: Voxware sound support code # sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum # sbxvi: SoundBlaster 16 # sbmidi: SoundBlaster 16 MIDI interface # pas: ProAudioSpectrum PCM and MIDI # gus: Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX # gusxvi: Gravis Ultrasound 16-bit PCM (do not use) # mss: Microsoft Sound System # opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum # uart: stand-alone 6850 UART for MIDI # mpu: Roland MPU-401 stand-alone card # # Beware! The addresses specified below are also hard-coded in # i386/isa/sound/sound_config.h. If you change the values here, you # must also change the values in the include file. # # pca: PCM audio through your PC speaker # # If you don't have a lpt0 device at IRQ 7, you can remove the # ``conflicts'' specification in the appropriate device entries below. # # If you have a GUS-MAX card and want to use the CS4231 codec on the # card the drqs for the gus max must be 8 bit (1, 2, or 3). # # If you would like to use the full duplex option on the gus, then define # flags to be the ``read dma channel''. # # options BROKEN_BUS_CLOCK #PAS-16 isn't working and OPTI chipset # options SYMPHONY_PAS #PAS-16 isn't working and SYMPHONY chipset # options EXCLUDE_SBPRO #PAS-16 # options SBC_IRQ=5 #PAS-16. Must match irq on sb0 line. # PAS16: The order of the pas0/sb0/opl0 is important since the # sb emulation is enabled in the pas-16 attach. # # The i386/isa/sound/sound.doc has more information. # Controls all sound devices controller snd0 device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device gus0 at isa? port 0x220 irq 12 drq 1 vector gusintr #device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3 vector gusintr device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr # Use this line for PAS avoid port conflict device opl0 at isa? port 0x38a # For normal case use next line # device opl0 at isa? port 0x388 device mpu0 at isa? port 0x330 irq 6 drq 0 device uart0 at isa? port 0x330 irq 5 vector "m6850intr" # More undocumented sound devices with bogus configurations for linting. # broken #device sscape0 at isa? port 0x330 irq 6 drq 0 #device trix0 at isa? port 0x330 irq 6 drq 0 vector sscapeintr # Not controlled by `snd' device pca0 at isa? port IO_TIMER1 tty # # Miscellaneous hardware: # # mcd: Mitsumi CD-ROM # scd: Sony CD-ROM # matcd: Matsushita/Panasonic CD-ROM # wt: Wangtek and Archive QIC-02/QIC-36 tape drives # ctx: Cortex-I frame grabber # apm: Laptop Advanced Power Management (experimental) # spigot: The Creative Labs Video Spigot video-acquisition board # meteor: Matrox Meteor video capture board # cy: Cyclades serial driver # dgb: Digiboard PC/Xi and PC/Xe series driver (ALPHA QUALITY!) # gp: National Instruments AT-GPIB and AT-GPIB/TNT board # asc: GI1904-based hand scanners, e.g. the Trust Amiscan Grey # gsc: Genius GS-4500 hand scanner. # joy: joystick # labpc: National Instrument's Lab-PC and Lab-PC+ # rc: RISCom/8 multiport card # tw: TW-523 power line interface for use with X-10 home control products # si: Specialix SI/XIO 4-32 port terminal multiplexor # stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based) # stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent) # # Notes on APM # Some APM implementations will not work with the `statistics clock' # enabled, so it's disabled by default if the APM driver is enabled. # However, this is not true for all laptops. Try removing the option # APM_BROKEN_STATCLOCK and see if suspend/resume work # options APM_IDLE_CPU # Tell APM to idle rather than halt'ing the cpu # # Notes on the spigot: # The video spigot is at 0xad6. This port address can not be changed. # The irq values may only be 10, 11, or 15 # I/O memory is an 8kb region. Possible values are: # 0a0000, 0a2000, ..., 0fffff, f00000, f02000, ..., ffffff # The start address must be on an even boundary. # Add the following option if you want to allow non-root users to be able # to access the spigot. This option is not secure because it allows users # direct access to the I/O page. # options SPIGOT_UNSECURE # # Notes on the Digiboard driver: # # The following flag values have special meanings: # 0x01 - alternate layout of pins # 0x02 - use the windowed PC/Xe in 64K mode # Notes on the Specialix SI/XIO driver: # **This is NOT a Specialix supported Driver!** # The host card is memory, not IO mapped. # The Rev 1 host cards use a 64K chunk, on a 32K boundary. # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. # Notes on the Stallion stl and stli drivers: # See src/i386/isa/README.stl for complete instructions. # This is version 0.0.5alpha, unsupported by Stallion. # The stl driver has a secondary IO port hard coded at 0x280. You need # to change src/i386/isa/stallion.c if you reconfigure this on the boards. # The "flags" and "iosiz" settings on the stli driver depend on the board: # EasyConnection 8/64 ISA: flags 23 iosiz 0x1000 # EasyConnection 8/64 EISA: flags 24 iosiz 0x10000 # EasyConnection 8/64 MCA: flags 25 iosiz 0x1000 # ONboard ISA: flags 4 iosiz 0x10000 # ONboard EISA: flags 7 iosiz 0x10000 # ONboard MCA: flags 3 iosiz 0x10000 # Brumby: flags 2 iosiz 0x4000 # Stallion: flags 1 iosiz 0x10000 device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # for the Sony CDU31/33A CDROM device scd0 at isa? port 0x230 bio # for the SoundBlaster 16 multicd - up to 4 devices controller matcd0 at isa? port 0x230 bio device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr device ctx0 at isa? port 0x230 iomem 0xd0000 device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000 vector spigintr device qcam0 at isa? port "IO_LPT3" tty device apm0 at isa? options APM_BROKEN_STATCLOCK device gp0 at isa? port 0x2c0 tty device gsc0 at isa? port "IO_GSC1" tty drq 3 device joy0 at isa? port "IO_GAME" device cy0 at isa? tty irq 10 iomem 0xd4000 iosiz 0x2000 vector cyintr device dgb0 at isa? port 0x220 iomem 0xfc0000 iosiz ? tty device labpc0 at isa? port 0x260 tty irq 5 vector labpcintr device rc0 at isa? port 0x220 tty irq 12 vector rcintr # the port and irq for tw0 are fictitious device tw0 at isa? port 0x380 tty irq 11 vector twintr device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr device bqu0 at isa? port 0x150 device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000 # # EISA devices: # # The EISA bus device is eisa0. It provides auto-detection and # configuration support for all devices on the EISA bus. # # The `ahb' device provides support for the Adaptec 174X adapter. # # The `ahc' device provides support for the Adaptec 274X and 284X # adapters. The 284X, although a VLB card responds to EISA probes. # controller eisa0 controller ahb0 controller ahc0 # enable tagged command queueing, which is a major performance win on # devices that support it (and controllers with enough SCB's) options AHC_TAGENABLE # enable SCB paging - See the ahc.4 man page options AHC_SCBPAGING_ENABLE # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured. Unfortunately, this doesn't work # on some motherboards. This option will force the driver to use programmed # I/O instead. options AHC_FORCE_PIO # # PCI devices: # # The main PCI bus device is `pci'. It provides auto-detection and # configuration support for all devices on the PCI bus, using either # configuration mode defined in the PCI specification. # # The `ahc' device provides support for the Adaptec 29/3940(U)(W) # and motherboard based AIC7870/AIC7880 adapters. # # The `ncr' device provides support for the NCR 53C810 and 53C825 # self-contained SCSI host adapters. # # The `de' device provides support for the Digital Equipment DC21040 # self-contained Ethernet adapter. # # The `fxp' device provides support for the Intel EtherExpress Pro/100B # PCI Fast Ethernet adapters. # # The `vx' device provides support for the 3Com 3C590 and 3C595 # early support # # The `fpa' device provides support for the Digital DEFPA PCI FDDI # adapter. pseudo-device fddi is also needed. # # The `meteor' device is a PCI video capture board. It can also have the # following options: # options METEOR_ALLOC_PAGES=xxx preallocate kernel pages for data entry # figure (ROWS*COLUMN*BYTES_PER_PIXEL*FRAME+PAGE_SIZE-1)/PAGE_SIZE # options METEOR_DEALLOC_PAGES remove all allocated pages on close(2) # options METEOR_DEALLOC_ABOVE=xxx remove all allocated pages above the # specified amount. If this value is below the allocated amount no action # taken # option METEOR_SYSTEM_DEFAULT={METEOR_PAL|METEOR_NTSC|METEOR_SECAM}, used # for initialization of fps routine when a signal is not present. # controller pci0 controller ahc1 controller ncr0 device de0 device fxp0 device vx0 device fpa0 device meteor0 # # PCCARD/PCMCIA # # crd: slot controller # pcic: slots controller crd0 controller pcic0 at crd? controller pcic1 at crd? # # Laptop/Notebook options: # # See also: # apm under `Miscellaneous hardware' # options PSM_NO_RESET for the `psm' driver # above. # For older notebooks that signal a powerfail condition (external # power supply dropped, or battery state low) by issuing an NMI: options POWERFAIL_NMI # make it beep instead of panicing # More undocumented options for linting. options CLK_CALIBRATION_LOOP options "CLK_USE_I8254_CALIBRATION" options "CLK_USE_I586_CALIBRATION" options COMPAT_LINUX options DEBUG options DEVFS_ROOT options "EXT2FS" options "I586_CTR_GUPROF" options "I586_PMC_GUPROF=0x70000" options "IBCS2" options "SCSI_2_DEF" options SHOW_BUSYBUFS # List buffers that prevent root unmount options SI_DEBUG options SPX_HACK