/*- * Copyright (c) 2006 M. Warner Losh. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* TODO: (in no order) * * 8) Need to sync busdma goo in atestop * 9) atestop should maybe free the mbufs? * * 1) detach * 2) Free dma setup * 3) Turn on the clock in pmc and turn on pins? Turn off? */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #endif #include #include #include #include #include #include "miibus_if.h" #define ATE_MAX_TX_BUFFERS 64 /* We have ping-pong tx buffers */ #define ATE_MAX_RX_BUFFERS 64 struct ate_softc { struct ifnet *ifp; /* ifnet pointer */ struct mtx sc_mtx; /* basically a perimeter lock */ device_t dev; /* Myself */ device_t miibus; /* My child miibus */ void *intrhand; /* Interrupt handle */ struct resource *irq_res; /* IRQ resource */ struct resource *mem_res; /* Memory resource */ struct callout tick_ch; /* Tick callout */ bus_dma_tag_t mtag; /* bus dma tag for mbufs */ bus_dmamap_t tx_map[ATE_MAX_TX_BUFFERS]; struct mbuf *sent_mbuf[ATE_MAX_TX_BUFFERS]; /* Sent mbufs */ bus_dma_tag_t rxtag; bus_dmamap_t rx_map[ATE_MAX_RX_BUFFERS]; void *rx_buf[ATE_MAX_RX_BUFFERS]; /* RX buffer space */ int rx_buf_ptr; bus_dma_tag_t rx_desc_tag; bus_dmamap_t rx_desc_map; int txcur; /* current tx map pointer */ bus_addr_t rx_desc_phys; eth_rx_desc_t *rx_descs; struct ifmib_iso_8802_3 mibdata; /* stuff for network mgmt */ }; static inline uint32_t RD4(struct ate_softc *sc, bus_size_t off) { return bus_read_4(sc->mem_res, off); } static inline void WR4(struct ate_softc *sc, bus_size_t off, uint32_t val) { bus_write_4(sc->mem_res, off, val); } #define ATE_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) #define ATE_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) #define ATE_LOCK_INIT(_sc) \ mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->dev), \ MTX_NETWORK_LOCK, MTX_DEF) #define ATE_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx); #define ATE_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED); #define ATE_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED); static devclass_t ate_devclass; /* ifnet entry points */ static void ateinit_locked(void *); static void atestart_locked(struct ifnet *); static void ateinit(void *); static void atestart(struct ifnet *); static void atestop(struct ate_softc *); static void atewatchdog(struct ifnet *); static int ateioctl(struct ifnet * ifp, u_long, caddr_t); /* bus entry points */ static int ate_probe(device_t dev); static int ate_attach(device_t dev); static int ate_detach(device_t dev); static void ate_intr(void *); /* helper routines */ static int ate_activate(device_t dev); static void ate_deactivate(device_t dev); static int ate_ifmedia_upd(struct ifnet *ifp); static void ate_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr); static void ate_get_mac(struct ate_softc *sc, u_char *eaddr); static void ate_set_mac(struct ate_softc *sc, u_char *eaddr); /* * The AT91 family of products has the ethernet called EMAC. However, * it isn't self identifying. It is anticipated that the parent bus * code will take care to only add ate devices where they really are. As * such, we do nothing here to identify the device and just set its name. */ static int ate_probe(device_t dev) { device_set_desc(dev, "EMAC"); return (0); } static int ate_attach(device_t dev) { struct ate_softc *sc = device_get_softc(dev); struct ifnet *ifp = NULL; int err; u_char eaddr[6]; sc->dev = dev; err = ate_activate(dev); if (err) goto out; /* calling atestop before ifp is set is OK */ atestop(sc); ATE_LOCK_INIT(sc); callout_init_mtx(&sc->tick_ch, &sc->sc_mtx, 0); ate_get_mac(sc, eaddr); ate_set_mac(sc, eaddr); sc->ifp = ifp = if_alloc(IFT_ETHER); if (mii_phy_probe(dev, &sc->miibus, ate_ifmedia_upd, ate_ifmedia_sts)) { device_printf(dev, "Cannot find my PHY.\n"); err = ENXIO; goto out; } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_start = atestart; ifp->if_ioctl = ateioctl; ifp->if_watchdog = atewatchdog; ifp->if_init = ateinit; ifp->if_baudrate = 10000000; IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; IFQ_SET_READY(&ifp->if_snd); ifp->if_timer = 0; ifp->if_linkmib = &sc->mibdata; ifp->if_linkmiblen = sizeof(sc->mibdata); sc->mibdata.dot3Compliance = DOT3COMPLIANCE_COLLS; ether_ifattach(ifp, eaddr); /* * Activate the interrupt */ err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE, ate_intr, sc, &sc->intrhand); if (err) { ether_ifdetach(ifp); ATE_LOCK_DESTROY(sc); } out:; if (err) ate_deactivate(dev); if (err && ifp) if_free(ifp); return (err); } static int ate_detach(device_t dev) { return EBUSY; /* XXX TODO(1) */ } static void ate_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { struct ate_softc *sc; if (error != 0) return; sc = (struct ate_softc *)arg; sc->rx_desc_phys = segs[0].ds_addr; } static void ate_load_rx_buf(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { struct ate_softc *sc; int i; if (error != 0) return; sc = (struct ate_softc *)arg; i = sc->rx_buf_ptr; /* * For the last buffer, set the wrap bit so the controller * restarts from the first descriptor. */ if (i == ATE_MAX_RX_BUFFERS - 1) sc->rx_descs[i].addr = segs[0].ds_addr | ETH_WRAP_BIT; else sc->rx_descs[i].addr = segs[0].ds_addr; sc->rx_descs[i].status = 0; /* Flush the memory in the mbuf */ bus_dmamap_sync(sc->rxtag, sc->rx_map[i], BUS_DMASYNC_PREREAD); } /* * Compute the multicast filter for this device using the standard * algorithm. I wonder why this isn't in ether somewhere as a lot * of different MAC chips use this method (or the reverse the bits) * method. */ static void ate_setmcast(struct ate_softc *sc) { uint32_t index; uint32_t mcaf[2]; u_char *af = (u_char *) mcaf; struct ifmultiaddr *ifma; mcaf[0] = 0; mcaf[1] = 0; IF_ADDR_LOCK(sc->ifp); TAILQ_FOREACH(ifma, &sc->ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; index = ether_crc32_be(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; af[index >> 3] |= 1 << (index & 7); } IF_ADDR_UNLOCK(sc->ifp); /* * Write the hash to the hash register. This card can also * accept unicast packets as well as multicast packets using this * register for easier bridging operations, but we don't take * advantage of that. Locks here are to avoid LOR with the * IF_ADDR_LOCK, but might not be strictly necessary. */ WR4(sc, ETH_HSL, mcaf[0]); WR4(sc, ETH_HSH, mcaf[1]); } static int ate_activate(device_t dev) { struct ate_softc *sc; int rid, err, i; sc = device_get_softc(dev); rid = 0; sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->mem_res == NULL) goto errout; rid = 0; sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); if (sc->mem_res == NULL) goto errout; /* * Allocate DMA tags and maps */ err = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, busdma_lock_mutex, &sc->sc_mtx, &sc->mtag); if (err != 0) goto errout; for (i = 0; i < ATE_MAX_TX_BUFFERS; i++) { err = bus_dmamap_create(sc->mtag, 0, &sc->tx_map[i]); if (err != 0) goto errout; } /* * Allocate our Rx buffers. This chip has a rx structure that's filled * in */ /* * Allocate DMA tags and maps for RX. */ err = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, busdma_lock_mutex, &sc->sc_mtx, &sc->rxtag); if (err != 0) goto errout; for (i = 0; i < ATE_MAX_RX_BUFFERS; i++) { err = bus_dmamap_create(sc->rxtag, 0, &sc->rx_map[i]); if (err != 0) goto errout; } /* Dma TAG and MAP for the rx descriptors. */ err = bus_dma_tag_create(NULL, sizeof(eth_rx_desc_t), 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, ATE_MAX_RX_BUFFERS * sizeof(eth_rx_desc_t), 1, ATE_MAX_RX_BUFFERS * sizeof(eth_rx_desc_t), 0, busdma_lock_mutex, &sc->sc_mtx, &sc->rx_desc_tag); if (err != 0) goto errout; if (bus_dmamem_alloc(sc->rx_desc_tag, (void **)&sc->rx_descs, BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &sc->rx_desc_map) != 0) goto errout; if (bus_dmamap_load(sc->rx_desc_tag, sc->rx_desc_map, sc->rx_descs, ATE_MAX_RX_BUFFERS * sizeof(eth_rx_desc_t), ate_getaddr, sc, 0) != 0) goto errout; /* XXX TODO(5) Put this in ateinit_locked? */ for (i = 0; i < ATE_MAX_RX_BUFFERS; i++) { sc->rx_buf_ptr = i; if (bus_dmamem_alloc(sc->rxtag, (void **)&sc->rx_buf[i], BUS_DMA_NOWAIT, &sc->rx_map[i]) != 0) goto errout; if (bus_dmamap_load(sc->rxtag, sc->rx_map[i], sc->rx_buf[i], MCLBYTES, ate_load_rx_buf, sc, 0) != 0) goto errout; } sc->rx_buf_ptr = 0; /* Flush the memory for the EMAC rx descriptor */ bus_dmamap_sync(sc->rx_desc_tag, sc->rx_desc_map, BUS_DMASYNC_PREWRITE); /* Write the descriptor queue address. */ WR4(sc, ETH_RBQP, sc->rx_desc_phys); return (0); errout: ate_deactivate(dev); return (ENOMEM); } static void ate_deactivate(device_t dev) { struct ate_softc *sc; sc = device_get_softc(dev); /* XXX TODO(2) teardown busdma junk, below from fxp -- customize */ #if 0 if (sc->fxp_mtag) { for (i = 0; i < FXP_NRFABUFS; i++) { rxp = &sc->fxp_desc.rx_list[i]; if (rxp->rx_mbuf != NULL) { bus_dmamap_sync(sc->fxp_mtag, rxp->rx_map, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->fxp_mtag, rxp->rx_map); m_freem(rxp->rx_mbuf); } bus_dmamap_destroy(sc->fxp_mtag, rxp->rx_map); } bus_dmamap_destroy(sc->fxp_mtag, sc->spare_map); for (i = 0; i < FXP_NTXCB; i++) { txp = &sc->fxp_desc.tx_list[i]; if (txp->tx_mbuf != NULL) { bus_dmamap_sync(sc->fxp_mtag, txp->tx_map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->fxp_mtag, txp->tx_map); m_freem(txp->tx_mbuf); } bus_dmamap_destroy(sc->fxp_mtag, txp->tx_map); } bus_dma_tag_destroy(sc->fxp_mtag); } if (sc->fxp_stag) bus_dma_tag_destroy(sc->fxp_stag); if (sc->cbl_tag) bus_dma_tag_destroy(sc->cbl_tag); if (sc->mcs_tag) bus_dma_tag_destroy(sc->mcs_tag); #endif if (sc->intrhand) bus_teardown_intr(dev, sc->irq_res, sc->intrhand); sc->intrhand = 0; bus_generic_detach(sc->dev); if (sc->miibus) device_delete_child(sc->dev, sc->miibus); if (sc->mem_res) bus_release_resource(dev, SYS_RES_IOPORT, rman_get_rid(sc->mem_res), sc->mem_res); sc->mem_res = 0; if (sc->irq_res) bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq_res), sc->irq_res); sc->irq_res = 0; return; } /* * Change media according to request. */ static int ate_ifmedia_upd(struct ifnet *ifp) { struct ate_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->miibus); ATE_LOCK(sc); mii_mediachg(mii); ATE_UNLOCK(sc); return (0); } /* * Notify the world which media we're using. */ static void ate_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct ate_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->miibus); ATE_LOCK(sc); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; ATE_UNLOCK(sc); } static void ate_tick(void *xsc) { struct ate_softc *sc = xsc; struct mii_data *mii; int active; /* * The KB920x boot loader tests ETH_SR & ETH_SR_LINK and will ask * the MII if there's a link if this bit is clear. Not sure if we * should do the same thing here or not. */ ATE_ASSERT_LOCKED(sc); if (sc->miibus != NULL) { mii = device_get_softc(sc->miibus); active = mii->mii_media_active; mii_tick(mii); if (mii->mii_media_status & IFM_ACTIVE && active != mii->mii_media_active) { /* * The speed and full/half-duplex state needs * to be reflected in the ETH_CFG register, it * seems. */ if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) & ~ETH_CFG_SPD); else WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) | ETH_CFG_SPD); if (mii->mii_media_active & IFM_FDX) WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) | ETH_CFG_FD); else WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) & ~ETH_CFG_FD); } } /* * Update the stats as best we can. When we're done, clear * the status counters and start over. We're supposed to read these * registers often enough that they won't overflow. Hopefully * once a second is often enough. Some don't map well to * the dot3Stats mib, so for those we just count them as general * errors. Stats for iframes, ibutes, oframes and obytes are * collected elsewhere. These registers zero on a read to prevent * races. */ sc->mibdata.dot3StatsAlignmentErrors += RD4(sc, ETH_ALE); sc->mibdata.dot3StatsFCSErrors += RD4(sc, ETH_SEQE); sc->mibdata.dot3StatsSingleCollisionFrames += RD4(sc, ETH_SCOL); sc->mibdata.dot3StatsMultipleCollisionFrames += RD4(sc, ETH_MCOL); sc->mibdata.dot3StatsSQETestErrors += RD4(sc, ETH_SQEE); sc->mibdata.dot3StatsDeferredTransmissions += RD4(sc, ETH_DTE); sc->mibdata.dot3StatsLateCollisions += RD4(sc, ETH_LCOL); sc->mibdata.dot3StatsExcessiveCollisions += RD4(sc, ETH_ECOL); sc->mibdata.dot3StatsCarrierSenseErrors += RD4(sc, ETH_CSE); sc->mibdata.dot3StatsFrameTooLongs += RD4(sc, ETH_ELR); sc->mibdata.dot3StatsInternalMacReceiveErrors += RD4(sc, ETH_DRFC); /* * not sure where to lump these, so count them against the errors * for the interface. */ sc->ifp->if_oerrors += RD4(sc, ETH_CSE) + RD4(sc, ETH_TUE); sc->ifp->if_ierrors += RD4(sc, ETH_CDE) + RD4(sc, ETH_RJB) + RD4(sc, ETH_USF); /* * Schedule another timeout one second from now. */ callout_reset(&sc->tick_ch, hz, ate_tick, sc); } static void ate_set_mac(struct ate_softc *sc, u_char *eaddr) { WR4(sc, ETH_SA1L, (eaddr[3] << 24) | (eaddr[2] << 16) | (eaddr[1] << 8) | eaddr[0]); WR4(sc, ETH_SA1H, (eaddr[5] << 8) | (eaddr[4])); } static void ate_get_mac(struct ate_softc *sc, u_char *eaddr) { uint32_t low, high; /* * The KB920x loaders will setup the MAC with an address, if one * is set in the loader. The TSC loader will also set the MAC address * in a similar way. Grab the MAC address from the SA1[HL] registers. */ low = RD4(sc, ETH_SA1L); high = RD4(sc, ETH_SA1H); eaddr[0] = (high >> 8) & 0xff; eaddr[1] = high & 0xff; eaddr[2] = (low >> 24) & 0xff; eaddr[3] = (low >> 16) & 0xff; eaddr[4] = (low >> 8) & 0xff; eaddr[5] = low & 0xff; } static void ate_intr(void *xsc) { struct ate_softc *sc = xsc; int status; int i; void *bp; struct mbuf *mb; uint32_t rx_stat; status = RD4(sc, ETH_ISR); if (status == 0) return; if (status & ETH_ISR_RCOM) { bus_dmamap_sync(sc->rx_desc_tag, sc->rx_desc_map, BUS_DMASYNC_POSTREAD); while (sc->rx_descs[sc->rx_buf_ptr].addr & ETH_CPU_OWNER) { i = sc->rx_buf_ptr; sc->rx_buf_ptr = (i + 1) % ATE_MAX_RX_BUFFERS; bp = sc->rx_buf[i]; rx_stat = sc->rx_descs[i].status; if ((rx_stat & ETH_LEN_MASK) == 0) { printf("ignoring bogus 0 len packet\n"); sc->rx_descs[i].addr &= ~ETH_CPU_OWNER; bus_dmamap_sync(sc->rx_desc_tag, sc->rx_desc_map, BUS_DMASYNC_PREWRITE); continue; } /* Flush memory for mbuf so we don't get stale bytes */ bus_dmamap_sync(sc->rxtag, sc->rx_map[i], BUS_DMASYNC_POSTREAD); WR4(sc, ETH_RSR, RD4(sc, ETH_RSR)); // XXX WHY? XXX imp /* * The length returned by the device includes the * ethernet CRC calculation for the packet, but * ifnet drivers are supposed to discard it. */ mb = m_devget(sc->rx_buf[i], (rx_stat & ETH_LEN_MASK) - ETHER_CRC_LEN, ETHER_ALIGN, sc->ifp, NULL); sc->rx_descs[i].addr &= ~ETH_CPU_OWNER; bus_dmamap_sync(sc->rx_desc_tag, sc->rx_desc_map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(sc->rxtag, sc->rx_map[i], BUS_DMASYNC_PREREAD); if (mb != NULL) (*sc->ifp->if_input)(sc->ifp, mb); } } if (status & ETH_ISR_TCOM) { ATE_LOCK(sc); if (sc->sent_mbuf[0]) { m_freem(sc->sent_mbuf[0]); sc->sent_mbuf[0] = NULL; } if (sc->sent_mbuf[1]) { if (RD4(sc, ETH_TSR) & ETH_TSR_IDLE) { m_freem(sc->sent_mbuf[1]); sc->txcur = 0; sc->sent_mbuf[0] = sc->sent_mbuf[1] = NULL; } else { sc->sent_mbuf[0] = sc->sent_mbuf[1]; sc->sent_mbuf[1] = NULL; sc->txcur = 1; } } else { sc->sent_mbuf[0] = NULL; sc->txcur = 0; } /* * We're no longer busy, so clear the busy flag and call the * start routine to xmit more packets. */ sc->ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; atestart_locked(sc->ifp); ATE_UNLOCK(sc); } if (status & ETH_ISR_RBNA) { printf("RBNA workaround\n"); /* Workaround Errata #11 */ WR4(sc, ETH_CTL, RD4(sc, ETH_CTL) &~ ETH_CTL_RE); WR4(sc, ETH_CTL, RD4(sc, ETH_CTL) | ETH_CTL_RE); } } /* * Reset and initialize the chip */ static void ateinit_locked(void *xsc) { struct ate_softc *sc = xsc; struct ifnet *ifp = sc->ifp; ATE_ASSERT_LOCKED(sc); /* * XXX TODO(3) * we need to turn on the EMAC clock in the pmc. With the * default boot loader, this is already turned on. However, we * need to think about how best to turn it on/off as the interface * is brought up/down, as well as dealing with the mii bus... * * We also need to multiplex the pins correctly. */ /* * There are two different ways that the mii bus is connected * to this chip. Select the right one based on a compile-time * option. */ #ifdef ATE_USE_RMII WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) | ETH_CFG_RMII); #else WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) & ~ETH_CFG_RMII); #endif /* * Turn on the multicast hash, and write 0's to it. */ WR4(sc, ETH_CFG, RD4(sc, ETH_CFG) | ETH_CFG_MTI); WR4(sc, ETH_HSH, 0); WR4(sc, ETH_HSL, 0); WR4(sc, ETH_CTL, RD4(sc, ETH_CTL) | ETH_CTL_TE | ETH_CTL_RE); WR4(sc, ETH_IER, ETH_ISR_RCOM | ETH_ISR_TCOM | ETH_ISR_RBNA); /* * Boot loader fills in MAC address. If that's not the case, then * we should set SA1L and SA1H here to the appropriate value. Note: * the byte order is big endian, not little endian, so we have some * swapping to do. Again, if we need it (which I don't think we do). */ ate_setmcast(sc); /* * Set 'running' flag, and clear output active flag * and attempt to start the output */ ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; atestart_locked(ifp); callout_reset(&sc->tick_ch, hz, ate_tick, sc); } /* * dequeu packets and transmit */ static void atestart_locked(struct ifnet *ifp) { struct ate_softc *sc = ifp->if_softc; struct mbuf *m, *mdefrag; bus_dma_segment_t segs[1]; int nseg; ATE_ASSERT_LOCKED(sc); if (ifp->if_drv_flags & IFF_DRV_OACTIVE) return; while (sc->txcur < ATE_MAX_TX_BUFFERS) { /* * check to see if there's room to put another packet into the * xmit queue. The EMAC chip has a ping-pong buffer for xmit * packets. We use OACTIVE to indicate "we can stuff more into * our buffers (clear) or not (set)." */ if (!(RD4(sc, ETH_TSR) & ETH_TSR_BNQ)) { ifp->if_drv_flags |= IFF_DRV_OACTIVE; return; } IFQ_DRV_DEQUEUE(&ifp->if_snd, m); if (m == 0) { ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; return; } mdefrag = m_defrag(m, M_DONTWAIT); if (mdefrag == NULL) { m_freem(m); return; } m = mdefrag; if (bus_dmamap_load_mbuf_sg(sc->mtag, sc->tx_map[sc->txcur], m, segs, &nseg, 0) != 0) { m_freem(m); continue; } bus_dmamap_sync(sc->mtag, sc->tx_map[sc->txcur], BUS_DMASYNC_PREWRITE); /* * tell the hardware to xmit the packet. */ WR4(sc, ETH_TAR, segs[0].ds_addr); WR4(sc, ETH_TCR, segs[0].ds_len); /* * Tap off here if there is a bpf listener. */ BPF_MTAP(ifp, m); sc->sent_mbuf[sc->txcur] = m; sc->txcur++; } } static void ateinit(void *xsc) { struct ate_softc *sc = xsc; ATE_LOCK(sc); ateinit_locked(sc); ATE_UNLOCK(sc); } static void atestart(struct ifnet *ifp) { struct ate_softc *sc = ifp->if_softc; ATE_LOCK(sc); atestart_locked(ifp); ATE_UNLOCK(sc); } /* * Turn off interrupts, and stop the nic. Can be called with sc->ifp NULL * so be careful. */ static void atestop(struct ate_softc *sc) { struct ifnet *ifp = sc->ifp; if (ifp) { ifp->if_timer = 0; ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); } callout_stop(&sc->tick_ch); /* * Enable some parts of the MAC that are needed always (like the * MII bus. This turns off the RE and TE bits, which will remain * off until ateinit() is called to turn them on. With RE and TE * turned off, there's no DMA to worry about after this write. */ WR4(sc, ETH_CTL, ETH_CTL_MPE); /* * Turn off all the configured options and revert to defaults. */ WR4(sc, ETH_CFG, ETH_CFG_CLK_32); /* * Turn off all the interrupts, and ack any pending ones by reading * the ISR. */ WR4(sc, ETH_IDR, 0xffffffff); RD4(sc, ETH_ISR); /* * Clear out the Transmit and Receiver Status registers of any * errors they may be reporting */ WR4(sc, ETH_TSR, 0xffffffff); WR4(sc, ETH_RSR, 0xffffffff); /* * XXX TODO(8) * need to worry about the busdma resources? Yes, I think we need * to sync and unload them. We may also need to release the mbufs * that are assocaited with RX and TX operations. */ /* * XXX we should power down the EMAC if it isn't in use, after * putting it into loopback mode. This saves about 400uA according * to the datasheet. */ } static void atewatchdog(struct ifnet *ifp) { struct ate_softc *sc = ifp->if_softc; ATE_LOCK(sc); device_printf(sc->dev, "Device timeout\n"); ifp->if_oerrors++; ateinit_locked(sc); ATE_UNLOCK(sc); } static int ateioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct ate_softc *sc = ifp->if_softc; struct mii_data *mii; struct ifreq *ifr = (struct ifreq *)data; int error = 0; switch (cmd) { case SIOCSIFFLAGS: ATE_LOCK(sc); if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_drv_flags & IFF_DRV_RUNNING) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; atestop(sc); } else { /* reinitialize card on any parameter change */ ateinit_locked(sc); } ATE_UNLOCK(sc); break; case SIOCADDMULTI: case SIOCDELMULTI: /* update multicast filter list. */ ATE_LOCK(sc); ate_setmcast(sc); ATE_UNLOCK(sc); error = 0; break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: mii = device_get_softc(sc->miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd); break; default: error = ether_ioctl(ifp, cmd, data); break; } return (error); } static void ate_child_detached(device_t dev, device_t child) { struct ate_softc *sc; sc = device_get_softc(dev); if (child == sc->miibus) sc->miibus = NULL; } /* * MII bus support routines. */ static int ate_miibus_readreg(device_t dev, int phy, int reg) { struct ate_softc *sc; int val; /* * XXX if we implement agressive power savings, then we need * XXX to make sure that the clock to the emac is on here */ if (phy != 0) return (0xffff); sc = device_get_softc(dev); DELAY(1); /* Hangs w/o this delay really 30.5us atm */ WR4(sc, ETH_MAN, ETH_MAN_REG_RD(phy, reg)); while ((RD4(sc, ETH_SR) & ETH_SR_IDLE) == 0) continue; val = RD4(sc, ETH_MAN) & ETH_MAN_VALUE_MASK; return (val); } static void ate_miibus_writereg(device_t dev, int phy, int reg, int data) { struct ate_softc *sc; /* * XXX if we implement agressive power savings, then we need * XXX to make sure that the clock to the emac is on here */ sc = device_get_softc(dev); WR4(sc, ETH_MAN, ETH_MAN_REG_WR(phy, reg, data)); while ((RD4(sc, ETH_SR) & ETH_SR_IDLE) == 0) continue; return; } static device_method_t ate_methods[] = { /* Device interface */ DEVMETHOD(device_probe, ate_probe), DEVMETHOD(device_attach, ate_attach), DEVMETHOD(device_detach, ate_detach), /* Bus interface */ DEVMETHOD(bus_child_detached, ate_child_detached), /* MII interface */ DEVMETHOD(miibus_readreg, ate_miibus_readreg), DEVMETHOD(miibus_writereg, ate_miibus_writereg), { 0, 0 } }; static driver_t ate_driver = { "ate", ate_methods, sizeof(struct ate_softc), }; DRIVER_MODULE(ate, atmelarm, ate_driver, ate_devclass, 0, 0); DRIVER_MODULE(miibus, ate, miibus_driver, miibus_devclass, 0, 0); MODULE_DEPEND(ate, miibus, 1, 1, 1); MODULE_DEPEND(ate, ether, 1, 1, 1);